@@ -2546,6 +2546,7 @@ static struct {
{ AR_SREV_VERSION_9287, "9287" },
{ AR_SREV_VERSION_9271, "9271" },
{ AR_SREV_VERSION_9300, "9300" },
+ { AR_SREV_VERSION_9485, "9485" },
};
/* For devices with external radios */
@@ -1536,7 +1536,7 @@ static void dma_rx(struct b43_dmaring *ring, int *slot)
dmaaddr = meta->dmaaddr;
goto drop_recycle_buffer;
}
- if (unlikely(len > ring->rx_buffersize)) {
+ if (unlikely(len + ring->frameoffset > ring->rx_buffersize)) {
/* The data did not fit into one descriptor buffer
* and is split over multiple buffers.
* This should never happen, as we try to allocate buffers
@@ -163,7 +163,7 @@ struct b43_dmadesc_generic {
/* DMA engine tuning knobs */
#define B43_TXRING_SLOTS 256
#define B43_RXRING_SLOTS 64
-#define B43_DMA0_RX_BUFFERSIZE IEEE80211_MAX_FRAME_LEN
+#define B43_DMA0_RX_BUFFERSIZE (B43_DMA0_RX_FRAMEOFFSET + IEEE80211_MAX_FRAME_LEN)
/* Pointer poison */
#define B43_DMA_PTR_POISON ((void *)ERR_PTR(-ENOMEM))
@@ -241,7 +241,7 @@ struct iwl_eeprom_enhanced_txpwr {
/* 6x00 Specific */
#define EEPROM_6000_TX_POWER_VERSION (4)
-#define EEPROM_6000_EEPROM_VERSION (0x434)
+#define EEPROM_6000_EEPROM_VERSION (0x423)
/* 6x50 Specific */
#define EEPROM_6050_TX_POWER_VERSION (4)
@@ -56,6 +56,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */
{USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
{USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
+ {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */
{USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
{USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */
{USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */
@@ -68,6 +69,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
{USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
{USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
{USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */
+ {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */
{USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
@@ -1062,8 +1062,10 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
* Stop all work.
*/
cancel_work_sync(&rt2x00dev->intf_work);
- cancel_work_sync(&rt2x00dev->rxdone_work);
- cancel_work_sync(&rt2x00dev->txdone_work);
+ if (rt2x00_is_usb(rt2x00dev)) {
+ cancel_work_sync(&rt2x00dev->rxdone_work);
+ cancel_work_sync(&rt2x00dev->txdone_work);
+ }
destroy_workqueue(rt2x00dev->workqueue);
/*
@@ -685,7 +685,7 @@ static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data)
u8 efuse_data, word_cnts = 0;
u16 efuse_addr = 0;
- u8 hworden;
+ u8 hworden = 0;
u8 tmpdata[8];
if (data == NULL)
@@ -303,7 +303,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
u16 box_reg, box_extreg;
u8 u1b_tmp;
bool isfw_read = false;
- u8 buf_index;
+ u8 buf_index = 0;
bool bwrite_sucess = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
@@ -246,7 +246,7 @@ static void _rtl_usb_io_handler_init(struct device *dev,
static void _rtl_usb_io_handler_release(struct ieee80211_hw *hw)
{
- struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_priv __maybe_unused *rtlpriv = rtl_priv(hw);
mutex_destroy(&rtlpriv->io.bb_mutex);
}
@@ -340,7 +340,7 @@ module_init(wl1271_init);
module_exit(wl1271_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
MODULE_FIRMWARE(WL1271_AP_FW_NAME);
@@ -487,7 +487,7 @@ module_init(wl1271_init);
module_exit(wl1271_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
MODULE_FIRMWARE(WL1271_AP_FW_NAME);
@@ -204,7 +204,10 @@ static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
kfree(wl->nvs);
- wl->nvs = kzalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+ if (len != sizeof(struct wl1271_nvs_file))
+ return -EINVAL;
+
+ wl->nvs = kzalloc(len, GFP_KERNEL);
if (!wl->nvs) {
wl1271_error("could not allocate memory for the nvs file");
ret = -ENOMEM;
@@ -643,7 +643,7 @@ static void rx_urb_complete(struct urb *urb)
usb = urb->context;
rx = &usb->rx;
- zd_usb_reset_rx_idle_timer(usb);
+ tasklet_schedule(&rx->reset_timer_tasklet);
if (length%rx->usb_packet_size > rx->usb_packet_size-4) {
/* If there is an old first fragment, we don't care. */
@@ -812,6 +812,7 @@ void zd_usb_disable_rx(struct zd_usb *usb)
__zd_usb_disable_rx(usb);
mutex_unlock(&rx->setup_mutex);
+ tasklet_kill(&rx->reset_timer_tasklet);
cancel_delayed_work_sync(&rx->idle_work);
}
@@ -1106,6 +1107,13 @@ static void zd_rx_idle_timer_handler(struct work_struct *work)
zd_usb_reset_rx(usb);
}
+static void zd_usb_reset_rx_idle_timer_tasklet(unsigned long param)
+{
+ struct zd_usb *usb = (struct zd_usb *)param;
+
+ zd_usb_reset_rx_idle_timer(usb);
+}
+
void zd_usb_reset_rx_idle_timer(struct zd_usb *usb)
{
struct zd_usb_rx *rx = &usb->rx;
@@ -1127,6 +1135,7 @@ static inline void init_usb_interrupt(struct zd_usb *usb)
static inline void init_usb_rx(struct zd_usb *usb)
{
struct zd_usb_rx *rx = &usb->rx;
+
spin_lock_init(&rx->lock);
mutex_init(&rx->setup_mutex);
if (interface_to_usbdev(usb->intf)->speed == USB_SPEED_HIGH) {
@@ -1136,11 +1145,14 @@ static inline void init_usb_rx(struct zd_usb *usb)
}
ZD_ASSERT(rx->fragment_length == 0);
INIT_DELAYED_WORK(&rx->idle_work, zd_rx_idle_timer_handler);
+ rx->reset_timer_tasklet.func = zd_usb_reset_rx_idle_timer_tasklet;
+ rx->reset_timer_tasklet.data = (unsigned long)usb;
}
static inline void init_usb_tx(struct zd_usb *usb)
{
struct zd_usb_tx *tx = &usb->tx;
+
spin_lock_init(&tx->lock);
atomic_set(&tx->enabled, 0);
tx->stopped = 0;
@@ -1671,6 +1683,10 @@ static void iowrite16v_urb_complete(struct urb *urb)
if (urb->status && !usb->cmd_error)
usb->cmd_error = urb->status;
+
+ if (!usb->cmd_error &&
+ urb->actual_length != urb->transfer_buffer_length)
+ usb->cmd_error = -EIO;
}
static int zd_submit_waiting_urb(struct zd_usb *usb, bool last)
@@ -1805,7 +1821,7 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
req, req_len, iowrite16v_urb_complete, usb,
ep->desc.bInterval);
- urb->transfer_flags |= URB_FREE_BUFFER | URB_SHORT_NOT_OK;
+ urb->transfer_flags |= URB_FREE_BUFFER;
/* Submit previous URB */
r = zd_submit_waiting_urb(usb, false);
@@ -183,6 +183,7 @@ struct zd_usb_rx {
spinlock_t lock;
struct mutex setup_mutex;
struct delayed_work idle_work;
+ struct tasklet_struct reset_timer_tasklet;
u8 fragment[2 * USB_MAX_RX_SIZE];
unsigned int fragment_length;
unsigned int usb_packet_size;
@@ -1753,8 +1753,19 @@ enum ieee80211_ampdu_mlme_action {
* that TX/RX_STOP can pass NULL for this parameter.
* The @buf_size parameter is only valid when the action is set to
* %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's reorder
- * buffer size (number of subframes) for this session -- aggregates
- * containing more subframes than this may not be transmitted to the peer.
+ * buffer size (number of subframes) for this session -- the driver
+ * may neither send aggregates containing more subframes than this
+ * nor send aggregates in a way that lost frames would exceed the
+ * buffer size. If just limiting the aggregate size, this would be
+ * possible with a buf_size of 8:
+ * - TX: 1.....7
+ * - RX: 2....7 (lost frame #1)
+ * - TX: 8..1...
+ * which is invalid since #1 was now re-transmitted well past the
+ * buffer size of 8. Correct ways to retransmit #1 would be:
+ * - TX: 1 or 18 or 81
+ * Even "189" would be wrong since 1 could be lost again.
+ *
* Returns a negative error code on failure.
* The callback can sleep.
*
@@ -2541,7 +2541,6 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx)
* same TID from the same station
*/
rx->skb = skb;
- rx->flags = 0;
CALL_RXH(ieee80211_rx_h_decrypt)
CALL_RXH(ieee80211_rx_h_check_more_data)
@@ -2612,6 +2611,7 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
.sdata = sta->sdata,
.local = sta->local,
.queue = tid,
+ .flags = 0,
};
struct tid_ampdu_rx *tid_agg_rx;
Dave, Here is another batch of fixes intended for 2.6.39... This includes a fix to avoid receiving duplicate frames in "cooked" monitor mode, a mac80211 documentation fix to avoid developer confusion, an rt2x00 fix to avoid cancelling some uninitialized work, a wl12xx buffer overflow fix, an email address correction for wl12xx module info, a zd1211rw regression fix, a zd1211rw WARNING fix, and rtlwifi fix to avoid using some uninitialized variables, a fix to broaden the iwl600 hardware supported by iwlagn to match what the Windows driver is supporting, a b43 fix to allocate properly sized receive buffers, and some stuff related to device IDs. Please let me know if there are problems! John --- The following changes since commit 738faca34335cd1d5d87fa7c58703139c7fa15bd: ipv6: Don't pass invalid dst_entry pointer to dst_release(). (2011-04-04 13:07:26 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master Christian Lamparter (1): p54usb: IDs for two new devices Helmut Schaa (1): mac80211: Fix duplicate frames on cooked monitor Johannes Berg (1): mac80211: fix comment regarding aggregation buf_size John W. Linville (2): b43: allocate receive buffers big enough for max frame len + offset iwlwifi: accept EEPROM version 0x423 for iwl6000 Jussi Kivilinna (2): zd1211rw: remove URB_SHORT_NOT_OK flag in zd_usb_iowrite16v_async() zd1211rw: reset rx idle timer from tasklet Larry Finger (1): rtlwifi: Fix some warnings/bugs Luciano Coelho (2): wl12xx: fix module author's email address in the spi and sdio modules wl12xx: fix potential buffer overflow in testmode nvs push Senthil Balasubramanian (1): ath9k: Fix phy info print message with AR9485 chipset. Stanislaw Gruszka (1): rt2x00: fix cancelling uninitialized work drivers/net/wireless/ath/ath9k/hw.c | 1 + drivers/net/wireless/b43/dma.c | 2 +- drivers/net/wireless/b43/dma.h | 2 +- drivers/net/wireless/iwlwifi/iwl-eeprom.h | 2 +- drivers/net/wireless/p54/p54usb.c | 2 ++ drivers/net/wireless/rt2x00/rt2x00dev.c | 6 ++++-- drivers/net/wireless/rtlwifi/efuse.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c | 2 +- drivers/net/wireless/rtlwifi/usb.c | 2 +- drivers/net/wireless/wl12xx/sdio.c | 2 +- drivers/net/wireless/wl12xx/spi.c | 2 +- drivers/net/wireless/wl12xx/testmode.c | 5 ++++- drivers/net/wireless/zd1211rw/zd_usb.c | 20 ++++++++++++++++++-- drivers/net/wireless/zd1211rw/zd_usb.h | 1 + include/net/mac80211.h | 15 +++++++++++++-- net/mac80211/rx.c | 2 +- 16 files changed, 52 insertions(+), 16 deletions(-)