[v4,01/10] bindings: PCI: designware: Example update

Message ID 1936f007686d3cbb0ed3072d4cd81abc961bf358.1523881182.git.gustavo.pimentel@synopsys.com
State New
Headers show
Series
  • Designware EP support and code clean up
Related show

Commit Message

Gustavo Pimentel April 16, 2018, 2:37 p.m.
Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers,
however it still be compatible with any previous DT that uses the old
reg-name.

Replaces the PCIe base address example by a real PCIe base address in use.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
---
Changes v1->v2:
 - Removed any iATU reference or changes to avoid confusion.
 - Add "snps,dw-pcie" compatible string following Kishon's suggestion.
Changes v2->v3:
- Nothing changed, just to follow the patch set version.
Changes v3->v4:
- Reverted "snps,dw-pcie-rc" compatible string requested by Rob Herring.

 Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Rob Herring April 16, 2018, 9:39 p.m. | #1
On Mon, Apr 16, 2018 at 03:37:49PM +0100, Gustavo Pimentel wrote:
> Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers,
> however it still be compatible with any previous DT that uses the old
> reg-name.
> 
> Replaces the PCIe base address example by a real PCIe base address in use.
> 
> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> ---
> Changes v1->v2:
>  - Removed any iATU reference or changes to avoid confusion.
>  - Add "snps,dw-pcie" compatible string following Kishon's suggestion.
> Changes v2->v3:
> - Nothing changed, just to follow the patch set version.
> Changes v3->v4:
> - Reverted "snps,dw-pcie-rc" compatible string requested by Rob Herring.
> 
>  Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> index 1da7ade..7f9804d 100644
> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
> @@ -1,7 +1,8 @@
>  * Synopsys DesignWare PCIe interface
>  
>  Required properties:
> -- compatible: should contain "snps,dw-pcie" to identify the core.
> +- compatible:
> +	"snps,dw-pcie" for RC mode;
>  - reg: Should contain the configuration address space.
>  - reg-names: Must be "config" for the PCIe configuration space.
>      (The old way of getting the configuration address space from "ranges"
> @@ -41,11 +42,11 @@ EP mode:
>  
>  Example configuration:
>  
> -	pcie: pcie@dffff000 {
> +	pcie: pcie@dfc00000 {
>  		compatible = "snps,dw-pcie";
> -		reg = <0xdffff000 0x1000>, /* Controller registers */
> -		      <0xd0000000 0x2000>; /* PCI config space */
> -		reg-names = "ctrlreg", "config";
> +		reg = <0xdfc00000 0x0001000>, /* IP registers */
> +		      <0xd0000000 0x0002000>; /* Configuration space */
> +		reg-names = "dbi", "config";
>  		#address-cells = <3>;
>  		#size-cells = <2>;
>  		device_type = "pci";
> @@ -54,5 +55,4 @@ Example configuration:
>  		interrupts = <25>, <24>;
>  		#interrupt-cells = <1>;
>  		num-lanes = <1>;
> -		num-viewport = <3>;

Seems like a spurious change?

>  	};
> -- 
> 2.7.4
> 
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Gustavo Pimentel April 17, 2018, 1:47 p.m. | #2
Hi Rob,

On 16/04/2018 22:39, Rob Herring wrote:
> On Mon, Apr 16, 2018 at 03:37:49PM +0100, Gustavo Pimentel wrote:
>> Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers,
>> however it still be compatible with any previous DT that uses the old
>> reg-name.
>>
>> Replaces the PCIe base address example by a real PCIe base address in use.
>>
>> Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>> ---
>> Changes v1->v2:
>>  - Removed any iATU reference or changes to avoid confusion.
>>  - Add "snps,dw-pcie" compatible string following Kishon's suggestion.
>> Changes v2->v3:
>> - Nothing changed, just to follow the patch set version.
>> Changes v3->v4:
>> - Reverted "snps,dw-pcie-rc" compatible string requested by Rob Herring.
>>
>>  Documentation/devicetree/bindings/pci/designware-pcie.txt | 12 ++++++------
>>  1 file changed, 6 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> index 1da7ade..7f9804d 100644
>> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
>> @@ -1,7 +1,8 @@
>>  * Synopsys DesignWare PCIe interface
>>  
>>  Required properties:
>> -- compatible: should contain "snps,dw-pcie" to identify the core.
>> +- compatible:
>> +	"snps,dw-pcie" for RC mode;
>>  - reg: Should contain the configuration address space.
>>  - reg-names: Must be "config" for the PCIe configuration space.
>>      (The old way of getting the configuration address space from "ranges"
>> @@ -41,11 +42,11 @@ EP mode:
>>  
>>  Example configuration:
>>  
>> -	pcie: pcie@dffff000 {
>> +	pcie: pcie@dfc00000 {
>>  		compatible = "snps,dw-pcie";
>> -		reg = <0xdffff000 0x1000>, /* Controller registers */
>> -		      <0xd0000000 0x2000>; /* PCI config space */
>> -		reg-names = "ctrlreg", "config";
>> +		reg = <0xdfc00000 0x0001000>, /* IP registers */
>> +		      <0xd0000000 0x0002000>; /* Configuration space */
>> +		reg-names = "dbi", "config";
>>  		#address-cells = <3>;
>>  		#size-cells = <2>;
>>  		device_type = "pci";
>> @@ -54,5 +55,4 @@ Example configuration:
>>  		interrupts = <25>, <24>;
>>  		#interrupt-cells = <1>;
>>  		num-lanes = <1>;
>> -		num-viewport = <3>;
> 
> Seems like a spurious change?

This item is optional, according to the description, if not specified the driver
assumes by default 2.
By maintaining the configuration like this, I can guarantee that is a functional
configuration, since it's one that I normally use. But I can reverted if you desire.

> 
>>  	};
>> -- 
>> 2.7.4
>>
>>

Thanks,
Gustavo

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 1da7ade..7f9804d 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -1,7 +1,8 @@ 
 * Synopsys DesignWare PCIe interface
 
 Required properties:
-- compatible: should contain "snps,dw-pcie" to identify the core.
+- compatible:
+	"snps,dw-pcie" for RC mode;
 - reg: Should contain the configuration address space.
 - reg-names: Must be "config" for the PCIe configuration space.
     (The old way of getting the configuration address space from "ranges"
@@ -41,11 +42,11 @@  EP mode:
 
 Example configuration:
 
-	pcie: pcie@dffff000 {
+	pcie: pcie@dfc00000 {
 		compatible = "snps,dw-pcie";
-		reg = <0xdffff000 0x1000>, /* Controller registers */
-		      <0xd0000000 0x2000>; /* PCI config space */
-		reg-names = "ctrlreg", "config";
+		reg = <0xdfc00000 0x0001000>, /* IP registers */
+		      <0xd0000000 0x0002000>; /* Configuration space */
+		reg-names = "dbi", "config";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		device_type = "pci";
@@ -54,5 +55,4 @@  Example configuration:
 		interrupts = <25>, <24>;
 		#interrupt-cells = <1>;
 		num-lanes = <1>;
-		num-viewport = <3>;
 	};