[v13,5/6] PCI: Unify wait for link active into generic PCI

Message ID 1523284914-2037-6-git-send-email-poza@codeaurora.org
State New
Delegated to: Bjorn Helgaas
Headers show
Series
  • Address error and recovery for AER and DPC
Related show

Commit Message

Oza Pawandeep April 9, 2018, 2:41 p.m.
Clients such as HP, DPC are using pcie_wait_link_active(), which waits
till the link becomes active or inactive.

Made generic function and moved it to drivers/pci/pci.c

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

Comments

Keith Busch April 9, 2018, 11:25 p.m. | #1
On Mon, Apr 09, 2018 at 10:41:53AM -0400, Oza Pawandeep wrote:
> +/**
> + * pcie_wait_for_link - Wait for link till it's active/inactive
> + * @pdev: Bridge device
> + * @active: waiting for active or inactive ?
> + *
> + * Use this to wait till link becomes active or inactive.
> + */
> +bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +{
> +	int timeout = 1000;
> +	bool ret;
> +	u16 lnk_status;
> +
> +	for (;;) {
> +		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
> +		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
> +		if (ret == active)
> +			return true;
> +		if (timeout <= 0)
> +			break;
> +		timeout -= 10;
> +	}

This is missing an msleep(10) at each iteration.

> +
> +	pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
> +		 active ? "set" : "cleared");
> +
> +	return false;
> +}
Oza Pawandeep April 12, 2018, 8:40 a.m. | #2
On 2018-04-10 04:55, Keith Busch wrote:
> On Mon, Apr 09, 2018 at 10:41:53AM -0400, Oza Pawandeep wrote:
>> +/**
>> + * pcie_wait_for_link - Wait for link till it's active/inactive
>> + * @pdev: Bridge device
>> + * @active: waiting for active or inactive ?
>> + *
>> + * Use this to wait till link becomes active or inactive.
>> + */
>> +bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
>> +{
>> +	int timeout = 1000;
>> +	bool ret;
>> +	u16 lnk_status;
>> +
>> +	for (;;) {
>> +		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
>> +		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
>> +		if (ret == active)
>> +			return true;
>> +		if (timeout <= 0)
>> +			break;
>> +		timeout -= 10;
>> +	}
> 
> This is missing an msleep(10) at each iteration.

will take care.

> 
>> +
>> +	pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
>> +		 active ? "set" : "cleared");
>> +
>> +	return false;
>> +}

Patch

diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 18a42f8..e0c2b8e 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -231,25 +231,11 @@  bool pciehp_check_link_active(struct controller *ctrl)
 	return ret;
 }
 
-static void __pcie_wait_link_active(struct controller *ctrl, bool active)
-{
-	int timeout = 1000;
-
-	if (pciehp_check_link_active(ctrl) == active)
-		return;
-	while (timeout > 0) {
-		msleep(10);
-		timeout -= 10;
-		if (pciehp_check_link_active(ctrl) == active)
-			return;
-	}
-	ctrl_dbg(ctrl, "Data Link Layer Link Active not %s in 1000 msec\n",
-			active ? "set" : "cleared");
-}
-
 static void pcie_wait_link_active(struct controller *ctrl)
 {
-	__pcie_wait_link_active(ctrl, true);
+	struct pci_dev *pdev = ctrl_dev(ctrl);
+
+	pcie_wait_for_link(pdev, true);
 }
 
 static bool pci_bus_check_dev(struct pci_bus *bus, int devfn)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index f6a4dd1..bbea997 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -4176,6 +4176,35 @@  static int pci_pm_reset(struct pci_dev *dev, int probe)
 	return 0;
 }
 
+/**
+ * pcie_wait_for_link - Wait for link till it's active/inactive
+ * @pdev: Bridge device
+ * @active: waiting for active or inactive ?
+ *
+ * Use this to wait till link becomes active or inactive.
+ */
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
+{
+	int timeout = 1000;
+	bool ret;
+	u16 lnk_status;
+
+	for (;;) {
+		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
+		ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
+		if (ret == active)
+			return true;
+		if (timeout <= 0)
+			break;
+		timeout -= 10;
+	}
+
+	pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
+		 active ? "set" : "cleared");
+
+	return false;
+}
+
 void pci_reset_secondary_bus(struct pci_dev *dev)
 {
 	u16 ctrl;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index abc514e..5c44fbc 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -345,6 +345,8 @@  void pci_enable_acs(struct pci_dev *dev);
 /* PCI error reporting and recovery */
 void pcie_do_recovery(struct pci_dev *dev, int severity);
 
+bool pcie_wait_for_link(struct pci_dev *pdev, bool active);
+
 #ifdef CONFIG_PCIEASPM
 void pcie_aspm_init_link_state(struct pci_dev *pdev);
 void pcie_aspm_exit_link_state(struct pci_dev *pdev);
diff --git a/drivers/pci/pcie/pcie-dpc.c b/drivers/pci/pcie/pcie-dpc.c
index 517c8b4..8e1553b 100644
--- a/drivers/pci/pcie/pcie-dpc.c
+++ b/drivers/pci/pcie/pcie-dpc.c
@@ -95,19 +95,9 @@  static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
 
 static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 {
-	unsigned long timeout = jiffies + HZ;
 	struct pci_dev *pdev = dpc->dev->port;
-	struct device *dev = &dpc->dev->device;
-	u16 lnk_status;
 
-	pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	while (lnk_status & PCI_EXP_LNKSTA_DLLLA &&
-					!time_after(jiffies, timeout)) {
-		msleep(10);
-		pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	}
-	if (lnk_status & PCI_EXP_LNKSTA_DLLLA)
-		dev_warn(dev, "Link state not disabled for DPC event\n");
+	pcie_wait_for_link(pdev, false);
 }
 
 /**