@@ -444,17 +444,6 @@ config TARGET_X600
select SUPPORT_SPL
select PL011_SERIAL
-config TARGET_IMX31_PHYCORE
- bool "Support imx31_phycore_eet"
- select CPU_ARM1136
- select BOARD_EARLY_INIT_F
-
-config TARGET_IMX31_PHYCORE_EET
- bool "Support imx31_phycore_eet"
- select BOARD_LATE_INIT
- select CPU_ARM1136
- select BOARD_EARLY_INIT_F
-
config TARGET_MX31ADS
bool "Support mx31ads"
select CPU_ARM1136
@@ -1343,7 +1332,6 @@ source "board/gumstix/pepper/Kconfig"
source "board/h2200/Kconfig"
source "board/hisilicon/hikey/Kconfig"
source "board/hisilicon/poplar/Kconfig"
-source "board/imx31_phycore/Kconfig"
source "board/isee/igep003x/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/silica/pengwyn/Kconfig"
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_IMX31_PHYCORE || TARGET_IMX31_PHYCORE_EET
-
-config SYS_BOARD
- default "imx31_phycore"
-
-config SYS_SOC
- default "mx31"
-
-config SYS_CONFIG_NAME
- default "imx31_phycore"
-
-endif
deleted file mode 100644
@@ -1,11 +0,0 @@
-IMX31_PHYCORE BOARD
-#M: -
-S: Maintained
-F: board/imx31_phycore/
-F: include/configs/imx31_phycore.h
-F: configs/imx31_phycore_defconfig
-
-IMX31_PHYCORE_EET BOARD
-#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
-S: Orphan (since 2013-09)
-F: configs/imx31_phycore_eet_defconfig
deleted file mode 100644
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := imx31_phycore.o
-obj-y += lowlevel_init.o
deleted file mode 100644
@@ -1,154 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <common.h>
-#include <s6e63d6.h>
-#include <netdev.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/mach-types.h>
-#include <asm/arch/sys_proto.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
- /* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
- return 0;
-}
-
-int board_init(void)
-{
-
- gd->bd->bi_arch_number = MACH_TYPE_PCM037; /* board id for linux */
- gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
-
- return 0;
-}
-
-int board_early_init_f(void)
-{
- /* CS0: Nor Flash */
- static const struct mxc_weimcs cs0 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 15, 0, 0, 3),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
- };
-
- /* CS1: Network Controller */
- static const struct mxc_weimcs cs1 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 31, 0, 0, 6),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(4, 4, 4, 10, 4, 0, 5, 4, 0, 0, 0, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(4, 4, 4, 4, 0, 1, 4, 3, 0, 0, 0, 0, 1, 0)
- };
-
- /* CS4: SRAM */
- static const struct mxc_weimcs cs4 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
- };
-
- mxc_setup_weimcs(0, &cs0);
- mxc_setup_weimcs(1, &cs1);
- mxc_setup_weimcs(4, &cs4);
-
- /* setup pins for UART1 */
- mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
- mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
- mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
- mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
-
- /* setup pins for I2C2 (for EEPROM, RTC) */
- mx31_gpio_mux(MUX_CSPI2_MOSI__I2C2_SCL);
- mx31_gpio_mux(MUX_CSPI2_MISO__I2C2_SDA);
-
- return 0;
-}
-
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
-#ifdef CONFIG_S6E63D6
- struct s6e63d6 data = {
- /*
- * See comment in mxc_spi.c::decode_cs() for .cs field format.
- * We use GPIO 57 as a chipselect for the S6E63D6 and chipselect
- * 2 of the SPI controller #1, since it is unused.
- */
- .cs = 2 | (57 << 8),
- .bus = 0,
- .id = 0,
- };
- int ret;
-
- /* SPI1 */
- mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK);
- mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B);
- mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI);
- mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO);
- mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B);
- mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B);
- mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B);
-
- /* start SPI1 clock */
- __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2);
-
- /* GPIO 57 */
- /* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */
- mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO));
-
- /* SPI1 CS2 is free */
- ret = s6e63d6_init(&data);
- if (ret)
- return ret;
-
- /*
- * This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC
- * OLED display connected to a S6E63D6 SPI display controller in the
- * 18 bit RGB mode
- */
- s6e63d6_index(&data, 2);
- s6e63d6_param(&data, 0x0182);
- s6e63d6_index(&data, 3);
- s6e63d6_param(&data, 0x8130);
- s6e63d6_index(&data, 0x10);
- s6e63d6_param(&data, 0x0000);
- s6e63d6_index(&data, 5);
- s6e63d6_param(&data, 0x0001);
- s6e63d6_index(&data, 0x22);
-#endif
- return 0;
-}
-#endif
-
-int checkboard (void)
-{
- printf("Board: Phytec phyCore i.MX31\n");
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC911X
- rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
- return rc;
-}
deleted file mode 100644
@@ -1,88 +0,0 @@
-/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/arch/imx-regs.h>
-
-.macro REG reg, val
- ldr r2, =\reg
- ldr r3, =\val
- str r3, [r2]
-.endm
-
-.macro REG8 reg, val
- ldr r2, =\reg
- ldr r3, =\val
- strb r3, [r2]
-.endm
-
-.macro DELAY loops
- ldr r2, =\loops
-1:
- subs r2, r2, #1
- nop
- bcs 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
-
- REG IPU_CONF, IPU_CONF_DI_EN
- REG CCM_CCMR, 0x074B0BF5
-
- DELAY 0x40000
-
- REG CCM_CCMR, 0x074B0BF5 | CCMR_MPE
- REG CCM_CCMR, (0x074B0BF5 | CCMR_MPE) & ~CCMR_MDS
-
- REG CCM_PDR0, PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0)
-
- REG CCM_MPCTL, PLL_PD(0) | PLL_MFD(0xe) | PLL_MFI(9) | PLL_MFN(0xd)
-
- REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(0x43) | PLL_MFI(12) | PLL_MFN(1)
-
- REG 0x43FAC26C, 0 /* SDCLK */
- REG 0x43FAC270, 0 /* CAS */
- REG 0x43FAC274, 0 /* RAS */
- REG 0x43FAC27C, 0x1000 /* CS2 (CSD0) */
- REG 0x43FAC284, 0 /* DQM3 */
- REG 0x43FAC288, 0 /* DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC) */
- REG 0x43FAC28C, 0
- REG 0x43FAC290, 0
- REG 0x43FAC294, 0
- REG 0x43FAC298, 0
- REG 0x43FAC29C, 0
- REG 0x43FAC2A0, 0
- REG 0x43FAC2A4, 0
- REG 0x43FAC2A8, 0
- REG 0x43FAC2AC, 0
- REG 0x43FAC2B0, 0
- REG 0x43FAC2B4, 0
- REG 0x43FAC2B8, 0
- REG 0x43FAC2BC, 0
- REG 0x43FAC2C0, 0
- REG 0x43FAC2C4, 0
- REG 0x43FAC2C8, 0
- REG 0x43FAC2CC, 0
- REG 0x43FAC2D0, 0
- REG 0x43FAC2D4, 0
- REG 0x43FAC2D8, 0
- REG 0x43FAC2DC, 0
- REG 0xB8001010, 0x00000004
- REG 0xB8001004, 0x006ac73a
- REG 0xB8001000, 0x92100000
- REG 0x80000f00, 0x12344321
- REG 0xB8001000, 0xa2100000
- REG 0x80000000, 0x12344321
- REG 0x80000000, 0x12344321
- REG 0xB8001000, 0xb2100000
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, 0x82226080
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
-
- mov pc, lr
deleted file mode 100644
@@ -1,19 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_BOOTDELAY=3
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="uboot> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-CONFIG_ENV_IS_IN_EEPROM=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xa8000000
-CONFIG_SMC911X_32_BIT=y
deleted file mode 100644
@@ -1,25 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_IMX31_PHYCORE_EET=y
-CONFIG_SYS_TEXT_BASE=0xA0000000
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_EEPROM=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_SPI=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
-CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:128k(uboot)ro,1536k(kernel),-(root)"
-CONFIG_ENV_IS_IN_EEPROM=y
-CONFIG_MXC_GPIO=y
-# CONFIG_MMC is not set
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_NETDEVICES=y
-CONFIG_SMC911X=y
-CONFIG_SMC911X_BASE=0xa8000000
-CONFIG_SMC911X_32_BIT=y
-CONFIG_MXC_SPI=y
-CONFIG_VIDEO=y
@@ -30,7 +30,6 @@ obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
obj-$(CONFIG_SCF0403_LCD) += scf0403_lcd.o
obj-$(CONFIG_S6E8AX0) += s6e8ax0.o
-obj-$(CONFIG_S6E63D6) += s6e63d6.o
obj-$(CONFIG_LD9040) += ld9040.o
obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o
deleted file mode 100644
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <spi.h>
-#include <s6e63d6.h>
-
-/*
- * Each transfer is performed as:
- * 1. chip-select active
- * 2. send 8-bit start code
- * 3. send 16-bit data
- * 4. chip-select inactive
- */
-static int send_word(struct s6e63d6 *data, u8 rs, u16 word)
-{
- /*
- * The start byte looks like (binary):
- * 01110<ID><RS><R/W>
- * RS is 0 for index or 1 for data, and R/W is 0 for write.
- */
- u32 buf8 = 0x70 | data->id | (rs & 2);
- u32 buf16 = cpu_to_le16(word);
- u32 buf_in;
- int err;
-
- err = spi_xfer(data->slave, 8, &buf8, &buf_in, SPI_XFER_BEGIN);
- if (err)
- return err;
-
- return spi_xfer(data->slave, 16, &buf16, &buf_in, SPI_XFER_END);
-}
-
-/* Index and param differ in Register Select bit */
-int s6e63d6_index(struct s6e63d6 *data, u8 idx)
-{
- return send_word(data, 0, idx);
-}
-
-int s6e63d6_param(struct s6e63d6 *data, u16 param)
-{
- return send_word(data, 2, param);
-}
-
-int s6e63d6_init(struct s6e63d6 *data)
-{
- if (data->id != 0 && data->id != 4) {
- printf("s6e63d6: invalid ID %u\n", data->id);
- return 1;
- }
-
- data->slave = spi_setup_slave(data->bus, data->cs, 100000, SPI_MODE_3);
- if (!data->slave)
- return 1;
-
- return 0;
-}
deleted file mode 100644
@@ -1,155 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Kshitij Gupta <kshitij@ti.com>
- *
- * Configuration settings for the phyCORE-i.MX31 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-/* High Level Configuration Options */
-#define CONFIG_MX31 /* This is a mx31 */
-#define CONFIG_MX31_CLK32 32000
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 512 * 1024)
-
-/*
- * Hardware drivers
- */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.23.168
-#define CONFIG_SERVERIP 192.168.23.2
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootargs_base=setenv bootargs console=ttySMX0,115200\0" \
- "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs " \
- "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
- "bootargs_flash=setenv bootargs $(bootargs) " \
- "root=/dev/mtdblock2 rootfstype=jffs2\0" \
- "bootargs_mtd=setenv bootargs $(bootargs) $(mtdparts)\0" \
- "bootcmd=run bootcmd_net\0" \
- "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs;" \
- "tftpboot 0x80000000 $(uimage);bootm\0" \
- "bootcmd_flash=run bootargs_base bootargs_mtd bootargs_flash;" \
- "bootm 0x80000000\0" \
- "unlock=yes\0" \
- "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
- "prg_uboot=tftpboot 0x80000000 $(uboot);" \
- "protect off 0xa0000000 +0x20000;" \
- "erase 0xa0000000 +0x20000;" \
- "cp.b 0x80000000 0xa0000000 $(filesize)\0" \
- "prg_kernel=tftpboot 0x80000000 $(uimage);" \
- "erase 0xa0040000 +0x180000;" \
- "cp.b 0x80000000 0xa0040000 $(filesize)\0" \
- "prg_jffs2=tftpboot 0x80000000 $(jffs2);" \
- "erase 0xa01c0000 0xa1ffffff;" \
- "cp.b 0x80000000 0xa01c0000 $(filesize)\0" \
- "videomode=video=ctfb:x:240,y:320,depth:16,mode:0," \
- "pclk:185925,le:9,ri:17,up:7,lo:10,hs:1,vs:1," \
- "sync:1241513985,vmode:0\0"
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x10000
-
-#define CONFIG_SYS_LOAD_ADDR 0 /* default load address */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_BASE 0xa0000000
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max # of sectors/chip */
-/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_OFFSET 0x00 /* env. starts here */
-#define CONFIG_ENV_SIZE 4096
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10 ms delay */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* byte addr. lenght */
-
-/*
- * CFI FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER /* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */
-
-/*
- * Timeout for Flash Erase and Flash Write
- * timeout values are in ticks
- */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (100*CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (100*CONFIG_SYS_HZ)
-
-/*
- * JFFS2 partitions
- */
-#define CONFIG_JFFS2_DEV "nor0"
-
-/* EET platform additions */
-#ifdef CONFIG_TARGET_IMX31_PHYCORE_EET
-#define CONFIG_HARD_SPI
-
-#define CONFIG_S6E63D6
-
-#define CONFIG_VIDEO_MX3
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#endif
-
-#endif /* __CONFIG_H */
deleted file mode 100644
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#ifndef _S6E63D6_H_
-#define _S6E63D6_H_
-
-struct s6e63d6 {
- unsigned int bus;
- unsigned int cs;
- unsigned int id;
- struct spi_slave *slave;
-};
-
-extern int s6e63d6_init(struct s6e63d6 *data);
-extern int s6e63d6_index(struct s6e63d6 *data, u8 idx);
-extern int s6e63d6_param(struct s6e63d6 *data, u16 param);
-
-#endif
This platform has been marked as orphaned since September 2013, remove. Signed-off-by: Tom Rini <trini@konsulko.com> --- arch/arm/Kconfig | 12 --- board/imx31_phycore/Kconfig | 12 --- board/imx31_phycore/MAINTAINERS | 11 --- board/imx31_phycore/Makefile | 9 --- board/imx31_phycore/imx31_phycore.c | 154 ----------------------------------- board/imx31_phycore/lowlevel_init.S | 88 -------------------- configs/imx31_phycore_defconfig | 19 ----- configs/imx31_phycore_eet_defconfig | 25 ------ drivers/video/Makefile | 1 - drivers/video/s6e63d6.c | 60 -------------- include/configs/imx31_phycore.h | 155 ------------------------------------ include/s6e63d6.h | 21 ----- 12 files changed, 567 deletions(-) delete mode 100644 board/imx31_phycore/Kconfig delete mode 100644 board/imx31_phycore/MAINTAINERS delete mode 100644 board/imx31_phycore/Makefile delete mode 100644 board/imx31_phycore/imx31_phycore.c delete mode 100644 board/imx31_phycore/lowlevel_init.S delete mode 100644 configs/imx31_phycore_defconfig delete mode 100644 configs/imx31_phycore_eet_defconfig delete mode 100644 drivers/video/s6e63d6.c delete mode 100644 include/configs/imx31_phycore.h delete mode 100644 include/s6e63d6.h