[v4,2/6] PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf()

Message ID 20180406145536.19637-3-thomas.petazzoni@bootlin.com
State Accepted
Delegated to: Lorenzo Pieralisi
Headers show
  • PCI: aardvark: misc fixes and improvements
Related show

Commit Message

Thomas Petazzoni April 6, 2018, 2:55 p.m.
From: Victor Gu <xigu@marvell.com>

When setting the PIO_ADDR_LS register during a configuration read, we
were properly passing the device number, function number and register
number, but not the bus number, causing issues when reading the
configuration of PCIe devices.

Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Gu <xigu@marvell.com>
Reviewed-by: Wilson Ding <dingwei@marvell.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2:
 - Drop PCIE_BDF() macro, since it's no longer used. Noticed by Bjorn
 drivers/pci/host/pci-aardvark.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)


diff --git a/drivers/pci/host/pci-aardvark.c b/drivers/pci/host/pci-aardvark.c
index b72f15c99793..5b8201aaf34d 100644
--- a/drivers/pci/host/pci-aardvark.c
+++ b/drivers/pci/host/pci-aardvark.c
@@ -172,8 +172,6 @@ 
 #define PCIE_CONFIG_WR_TYPE0			0xa
 #define PCIE_CONFIG_WR_TYPE1			0xb
-/* PCI_BDF shifts 8bit, so we need extra 4bit shift */
-#define PCIE_BDF(dev)				(dev << 4)
 #define PCIE_CONF_BUS(bus)			(((bus) & 0xff) << 20)
 #define PCIE_CONF_DEV(dev)			(((dev) & 0x1f) << 15)
 #define PCIE_CONF_FUNC(fun)			(((fun) & 0x7)	<< 12)
@@ -456,7 +454,7 @@  static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 	advk_writel(pcie, reg, PIO_CTRL);
 	/* Program the address registers */
-	reg = PCIE_BDF(devfn) | PCIE_CONF_REG(where);
+	reg = PCIE_CONF_ADDR(bus->number, devfn, where);
 	advk_writel(pcie, reg, PIO_ADDR_LS);
 	advk_writel(pcie, 0, PIO_ADDR_MS);