===================================================================
@@ -702,6 +702,7 @@ static struct sh_eth_cpu_data rcar_gen1_
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
+ .no_xdfar = 1,
};
/* R-Car Gen2 and RZ/G1 */
@@ -735,6 +736,7 @@ static struct sh_eth_cpu_data rcar_gen2_
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
+ .no_xdfar = 1,
.rmiimode = 1,
.magic = 1,
};
@@ -1615,8 +1617,7 @@ static int sh_eth_rx(struct net_device *
/* If we don't need to check status, don't. -KDU */
if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
/* fix the values for the next receiving if RDE is set */
- if (intr_status & EESR_RDE &&
- mdp->reg_offset[RDFAR] != SH_ETH_OFFSET_INVALID) {
+ if (intr_status & EESR_RDE && !mdp->cd->no_xdfar) {
u32 count = (sh_eth_read(ndev, RDFAR) -
sh_eth_read(ndev, RDLAR)) >> 4;
===================================================================
@@ -508,6 +508,7 @@ struct sh_eth_cpu_data {
unsigned rpadir:1; /* E-DMAC have RPADIR */
unsigned no_trimd:1; /* E-DMAC DO NOT have TRIMD */
unsigned no_ade:1; /* E-DMAC DO NOT have ADE bit in EESR */
+ unsigned no_xdfar:1; /* E-DMAC DOES NOT have RDFAR/TDFAR */
unsigned xdfar_rw:1; /* E-DMAC has writeable RDFAR/TDFAR */
unsigned hw_checksum:1; /* E-DMAC has CSMR */
unsigned select_mii:1; /* EtherC have RMII_MII (MII select register) */
The commit 6ded286555c2 ("sh_eth: Fix RX recovery on R-Car in case of RX ring underrun") added a check for an bad RDFAR offset in sh_eth_rx(), so that the code could work on the R-Car Ether controllers which don't have this register (and TDFAR), then the commit 3365711df02 ("sh_eth: WARN on access to a register not implemented in a particular chip") replaced offset 0 with 0xffff. Adding/checking the 'no_xdfar' bit field in the 'struct sh_eth_cpu_data' instead results in less object code... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- drivers/net/ethernet/renesas/sh_eth.c | 5 +++-- drivers/net/ethernet/renesas/sh_eth.h | 1 + 2 files changed, 4 insertions(+), 2 deletions(-)