diff mbox series

[U-Boot,03/16] arm64: zynqmp: Use i2c-mux instead of i2cswitch instead

Message ID 5b6801cce1cfc9c1096404aa331ec52e0c04e191.1522161738.git.michal.simek@xilinx.com
State Accepted
Commit ba7b6dfae110eb2accc3fa3b25379cee9a7f43f0
Delegated to: Michal Simek
Headers show
Series Syncup DTS files with mainline Linux kernel | expand

Commit Message

Michal Simek March 27, 2018, 2:42 p.m. UTC 
Based on review from mainline i2c-mux is standard name for i2c switches.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/dts/zynqmp-zcu102-revA.dts | 6 +++---
 arch/arm/dts/zynqmp-zcu102-revB.dts | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index 1c9e4b1bd328..5f4ac22e1d7a 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -220,7 +220,7 @@ 
 		 */
 	};
 
-	i2cswitch@75 { /* u60 */
+	i2c-mux@75 { /* u60 */
 		compatible = "nxp,pca9544";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -412,7 +412,7 @@  drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 
 	/* FIXME PL i2c via PCA9306 - u45 */
 	/* FIXME MSP430 - u41 - not detected */
-	i2cswitch@74 { /* u34 */
+	i2c-mux@74 { /* u34 */
 		compatible = "nxp,pca9548";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -487,7 +487,7 @@  drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751)  += max20751.o
 		/* 5 - 7 unconnected */
 	};
 
-	i2cswitch@75 {
+	i2c-mux@75 {
 		compatible = "nxp,pca9548"; /* u135 */
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/dts/zynqmp-zcu102-revB.dts b/arch/arm/dts/zynqmp-zcu102-revB.dts
index d0acb29b64b3..46517ba0b4e2 100644
--- a/arch/arm/dts/zynqmp-zcu102-revB.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revB.dts
@@ -31,7 +31,7 @@ 
 
 /* Fix collision with u61 */
 &i2c0 {
-	i2cswitch@75 {
+	i2c-mux@75 {
 		i2c@2 {
 			max15303@1b { /* u8 */
 				compatible = "maxim,max15303";