diff mbox series

[U-Boot,v2,3/3] imx: hab: Provide hab_auth_img_or_fail command

Message ID 1522073505-13066-4-git-send-email-bryan.odonoghue@linaro.org
State Changes Requested
Delegated to: Stefano Babic
Headers show
Series imx: hab: Add helper functions for scripted HAB auth | expand

Commit Message

Bryan O'Donoghue March 26, 2018, 2:11 p.m. UTC
This patch adds hab_auth_img_or_fail() a command line function that
encapsulates a common usage of authenticate and failover, namely if
authenticate image fails, then drop to BootROM USB recovery mode.

For secure-boot systems, this type of locked down behavior is important to
ensure no unsigned images can be run.

It's possible to script this logic but, when done over and over again the
environment starts get very complex and repetitive, reducing that script
repetition down to a command line function makes sense.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
Cc: Breno Lima <breno.lima@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/mach-imx/hab.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Breno Matheus Lima March 27, 2018, 10:44 p.m. UTC | #1
Hi Bryan,

2018-03-26 11:11 GMT-03:00 Bryan O'Donoghue <bryan.odonoghue@linaro.org>:
> This patch adds hab_auth_img_or_fail() a command line function that
> encapsulates a common usage of authenticate and failover, namely if
> authenticate image fails, then drop to BootROM USB recovery mode.
>
> For secure-boot systems, this type of locked down behavior is important to
> ensure no unsigned images can be run.
>
> It's possible to script this logic but, when done over and over again the
> environment starts get very complex and repetitive, reducing that script
> repetition down to a command line function makes sense.
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
> Cc: Breno Lima <breno.lima@nxp.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>

Tested-by: Breno Lima <breno.lima@nxp.com>

Thanks,
Breno
Breno Matheus Lima March 27, 2018, 10:46 p.m. UTC | #2
Hi All,

2018-03-27 19:44 GMT-03:00 Breno Matheus Lima <brenomatheus@gmail.com>:
> Hi Bryan,
>
> 2018-03-26 11:11 GMT-03:00 Bryan O'Donoghue <bryan.odonoghue@linaro.org>:
>> This patch adds hab_auth_img_or_fail() a command line function that
>> encapsulates a common usage of authenticate and failover, namely if
>> authenticate image fails, then drop to BootROM USB recovery mode.
>>
>> For secure-boot systems, this type of locked down behavior is important to
>> ensure no unsigned images can be run.
>>
>> It's possible to script this logic but, when done over and over again the
>> environment starts get very complex and repetitive, reducing that script
>> repetition down to a command line function makes sense.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> Cc: Utkarsh Gupta <utkarsh.gupta@nxp.com>
>> Cc: Breno Lima <breno.lima@nxp.com>
>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>
> Tested-by: Breno Lima <breno.lima@nxp.com>
>
> Thanks,
> Breno

Sorry, I have comment on the wrong series, my intention was to comment
on V3 series. I will resend the tested-by

Thanks,
Breno Matheus Lima
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c
index c730c8f..9ca7bad 100644
--- a/arch/arm/mach-imx/hab.c
+++ b/arch/arm/mach-imx/hab.c
@@ -341,6 +341,31 @@  static int do_hab_failsafe(cmd_tbl_t *cmdtp, int flag, int argc,
 	return 0;
 }
 
+static int do_authenticate_image_or_failover(cmd_tbl_t *cmdtp, int flag,
+					     int argc, char * const argv[])
+{
+	int ret = CMD_RET_FAILURE;
+
+	if (argc != 4) {
+		ret = CMD_RET_USAGE;
+		goto error;
+	}
+
+	if (!imx_hab_is_enabled()) {
+		printf("error: secure boot disabled\n");
+		goto error;
+	}
+
+	if (do_authenticate_image(NULL, flag, argc, argv) != CMD_RET_SUCCESS) {
+		fprintf(stderr, "authentication fail -> %s %s %s %s\n",
+			argv[0], argv[1], argv[2], argv[3]);
+		do_hab_failsafe(0, 0, 1, NULL);
+	};
+	ret = CMD_RET_SUCCESS;
+error:
+	return ret;
+}
+
 U_BOOT_CMD(
 		hab_status, CONFIG_SYS_MAXARGS, 1, do_hab_status,
 		"display HAB status",
@@ -362,6 +387,16 @@  U_BOOT_CMD(
 		""
 	  );
 
+U_BOOT_CMD(
+		hab_auth_img_or_fail, 4, 0,
+		do_authenticate_image_or_failover,
+		"authenticate image via HAB on failure drop to USB BootROM mode",
+		"addr length ivt_offset\n"
+		"addr - image hex address\n"
+		"length - image hex length\n"
+		"ivt_offset - hex offset of IVT in the image"
+	  );
+
 #endif /* !defined(CONFIG_SPL_BUILD) */
 
 /* Get CSF Header length */