| Message ID | 20180322105522.8186-5-jiri@resnulli.us |
|---|---|
| State | RFC, archived |
| Delegated to: | David Miller |
| Headers | show |
| Series | devlink: introduce port flavours and common phys_port_name generation | expand |
On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: > From: Jiri Pirko <jiri@mellanox.com> > > Set the attrs and allow to expose port flavour to user via devlink. > > Signed-off-by: Jiri Pirko <jiri@mellanox.com> > --- > net/dsa/dsa2.c | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c > index adf50fbc4c13..49453690696d 100644 > --- a/net/dsa/dsa2.c > +++ b/net/dsa/dsa2.c > @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) > case DSA_PORT_TYPE_UNUSED: > break; > case DSA_PORT_TYPE_CPU: > + /* dp->index is used now as port_number. However > + * CPU ports should have separate numbering > + * independent from front panel port numbers. > + */ > + devlink_port_attrs_set(&dp->devlink_port, > + DEVLINK_PORT_FLAVOUR_CPU, > + dp->index, false, 0); > + err = dsa_port_link_register_of(dp); > + if (err) { > + dev_err(ds->dev, "failed to setup link for port %d.%d\n", > + ds->index, dp->index); > + return err; > + } Hi Jiri Please could you explain what you are trying to achieve with this call to dsa_port_link_register_of(dp); Thanks Andrew
On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: > From: Jiri Pirko <jiri@mellanox.com> > > Set the attrs and allow to expose port flavour to user via devlink. > > Signed-off-by: Jiri Pirko <jiri@mellanox.com> > --- > net/dsa/dsa2.c | 23 +++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > > diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c > index adf50fbc4c13..49453690696d 100644 > --- a/net/dsa/dsa2.c > +++ b/net/dsa/dsa2.c > @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) > case DSA_PORT_TYPE_UNUSED: > break; > case DSA_PORT_TYPE_CPU: > + /* dp->index is used now as port_number. However > + * CPU ports should have separate numbering > + * independent from front panel port numbers. > + */ > + devlink_port_attrs_set(&dp->devlink_port, > + DEVLINK_PORT_FLAVOUR_CPU, > + dp->index, false, 0); > + err = dsa_port_link_register_of(dp); > + if (err) { > + dev_err(ds->dev, "failed to setup link for port %d.%d\n", > + ds->index, dp->index); > + return err; > + } Ah, i get it. These used to be two case statements with one code block. But you split them apart, so needed to duplicate the dsa_port_link_register. Unfortunately, you forgot to add a 'break;', so it still falls through, and overwrites the port flavour to DSA. > case DSA_PORT_TYPE_DSA: > + /* dp->index is used now as port_number. However > + * DSA ports should have separate numbering > + * independent from front panel port numbers. > + */ > + devlink_port_attrs_set(&dp->devlink_port, > + DEVLINK_PORT_FLAVOUR_DSA, > + dp->index, false, 0); Andrew
Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >> From: Jiri Pirko <jiri@mellanox.com> >> >> Set the attrs and allow to expose port flavour to user via devlink. >> >> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >> --- >> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >> 1 file changed, 23 insertions(+) >> >> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >> index adf50fbc4c13..49453690696d 100644 >> --- a/net/dsa/dsa2.c >> +++ b/net/dsa/dsa2.c >> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >> case DSA_PORT_TYPE_UNUSED: >> break; >> case DSA_PORT_TYPE_CPU: >> + /* dp->index is used now as port_number. However >> + * CPU ports should have separate numbering >> + * independent from front panel port numbers. >> + */ >> + devlink_port_attrs_set(&dp->devlink_port, >> + DEVLINK_PORT_FLAVOUR_CPU, >> + dp->index, false, 0); >> + err = dsa_port_link_register_of(dp); >> + if (err) { >> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >> + ds->index, dp->index); >> + return err; >> + } > >Ah, i get it. These used to be two case statements with one code >block. But you split them apart, so needed to duplicate the >dsa_port_link_register. > >Unfortunately, you forgot to add a 'break;', so it still falls >through, and overwrites the port flavour to DSA. ah, crap. Don't have hw to test this :/ Will fix. Thanks! > >> case DSA_PORT_TYPE_DSA: >> + /* dp->index is used now as port_number. However >> + * DSA ports should have separate numbering >> + * independent from front panel port numbers. >> + */ >> + devlink_port_attrs_set(&dp->devlink_port, >> + DEVLINK_PORT_FLAVOUR_DSA, >> + dp->index, false, 0); > > Andrew
On 03/23/2018 07:49 AM, Jiri Pirko wrote: > Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>> From: Jiri Pirko <jiri@mellanox.com> >>> >>> Set the attrs and allow to expose port flavour to user via devlink. >>> >>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>> --- >>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>> 1 file changed, 23 insertions(+) >>> >>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>> index adf50fbc4c13..49453690696d 100644 >>> --- a/net/dsa/dsa2.c >>> +++ b/net/dsa/dsa2.c >>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>> case DSA_PORT_TYPE_UNUSED: >>> break; >>> case DSA_PORT_TYPE_CPU: >>> + /* dp->index is used now as port_number. However >>> + * CPU ports should have separate numbering >>> + * independent from front panel port numbers. >>> + */ >>> + devlink_port_attrs_set(&dp->devlink_port, >>> + DEVLINK_PORT_FLAVOUR_CPU, >>> + dp->index, false, 0); >>> + err = dsa_port_link_register_of(dp); >>> + if (err) { >>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>> + ds->index, dp->index); >>> + return err; >>> + } >> >> Ah, i get it. These used to be two case statements with one code >> block. But you split them apart, so needed to duplicate the >> dsa_port_link_register. >> >> Unfortunately, you forgot to add a 'break;', so it still falls >> through, and overwrites the port flavour to DSA. > > ah, crap. Don't have hw to test this :/ > Will fix. Thanks! You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will emulate a DSA switch. It won't create interconnect ports, since only one switch can be created with the method chosen, but this would have helped you catch the missing break since the "CPU" port would have been displayed as "DSA" anyway. If you need hardware, I am sure this can be somehow arranged. By that, I mean something on which you can run upstream Linux on without out of tree patches.
Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >On 03/23/2018 07:49 AM, Jiri Pirko wrote: >> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>> From: Jiri Pirko <jiri@mellanox.com> >>>> >>>> Set the attrs and allow to expose port flavour to user via devlink. >>>> >>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>> --- >>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>> 1 file changed, 23 insertions(+) >>>> >>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>> index adf50fbc4c13..49453690696d 100644 >>>> --- a/net/dsa/dsa2.c >>>> +++ b/net/dsa/dsa2.c >>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>> case DSA_PORT_TYPE_UNUSED: >>>> break; >>>> case DSA_PORT_TYPE_CPU: >>>> + /* dp->index is used now as port_number. However >>>> + * CPU ports should have separate numbering >>>> + * independent from front panel port numbers. >>>> + */ >>>> + devlink_port_attrs_set(&dp->devlink_port, >>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>> + dp->index, false, 0); >>>> + err = dsa_port_link_register_of(dp); >>>> + if (err) { >>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>> + ds->index, dp->index); >>>> + return err; >>>> + } >>> >>> Ah, i get it. These used to be two case statements with one code >>> block. But you split them apart, so needed to duplicate the >>> dsa_port_link_register. >>> >>> Unfortunately, you forgot to add a 'break;', so it still falls >>> through, and overwrites the port flavour to DSA. >> >> ah, crap. Don't have hw to test this :/ >> Will fix. Thanks! > >You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >emulate a DSA switch. It won't create interconnect ports, since only one >switch can be created with the method chosen, but this would have helped >you catch the missing break since the "CPU" port would have been >displayed as "DSA" anyway. Okay. > >If you need hardware, I am sure this can be somehow arranged. By that, I >mean something on which you can run upstream Linux on without out of >tree patches. Andrew is already taking care of that. Thanks.
Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >On 03/23/2018 07:49 AM, Jiri Pirko wrote: >> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>> From: Jiri Pirko <jiri@mellanox.com> >>>> >>>> Set the attrs and allow to expose port flavour to user via devlink. >>>> >>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>> --- >>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>> 1 file changed, 23 insertions(+) >>>> >>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>> index adf50fbc4c13..49453690696d 100644 >>>> --- a/net/dsa/dsa2.c >>>> +++ b/net/dsa/dsa2.c >>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>> case DSA_PORT_TYPE_UNUSED: >>>> break; >>>> case DSA_PORT_TYPE_CPU: >>>> + /* dp->index is used now as port_number. However >>>> + * CPU ports should have separate numbering >>>> + * independent from front panel port numbers. >>>> + */ >>>> + devlink_port_attrs_set(&dp->devlink_port, >>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>> + dp->index, false, 0); >>>> + err = dsa_port_link_register_of(dp); >>>> + if (err) { >>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>> + ds->index, dp->index); >>>> + return err; >>>> + } >>> >>> Ah, i get it. These used to be two case statements with one code >>> block. But you split them apart, so needed to duplicate the >>> dsa_port_link_register. >>> >>> Unfortunately, you forgot to add a 'break;', so it still falls >>> through, and overwrites the port flavour to DSA. >> >> ah, crap. Don't have hw to test this :/ >> Will fix. Thanks! > >You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >emulate a DSA switch. It won't create interconnect ports, since only one Hmm, trying to use dsa_loop. Doing: modprobe dsa_loop modprobe fixed_phy I don't see the netdevs. Any idea what am I doing wrong? Thanks! >switch can be created with the method chosen, but this would have helped >you catch the missing break since the "CPU" port would have been >displayed as "DSA" anyway. > >If you need hardware, I am sure this can be somehow arranged. By that, I >mean something on which you can run upstream Linux on without out of >tree patches. >-- >Florian
On 05/17/2018 07:02 AM, Jiri Pirko wrote: > Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >> On 03/23/2018 07:49 AM, Jiri Pirko wrote: >>> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>>> From: Jiri Pirko <jiri@mellanox.com> >>>>> >>>>> Set the attrs and allow to expose port flavour to user via devlink. >>>>> >>>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>>> --- >>>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>>> 1 file changed, 23 insertions(+) >>>>> >>>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>>> index adf50fbc4c13..49453690696d 100644 >>>>> --- a/net/dsa/dsa2.c >>>>> +++ b/net/dsa/dsa2.c >>>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>>> case DSA_PORT_TYPE_UNUSED: >>>>> break; >>>>> case DSA_PORT_TYPE_CPU: >>>>> + /* dp->index is used now as port_number. However >>>>> + * CPU ports should have separate numbering >>>>> + * independent from front panel port numbers. >>>>> + */ >>>>> + devlink_port_attrs_set(&dp->devlink_port, >>>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>>> + dp->index, false, 0); >>>>> + err = dsa_port_link_register_of(dp); >>>>> + if (err) { >>>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>>> + ds->index, dp->index); >>>>> + return err; >>>>> + } >>>> >>>> Ah, i get it. These used to be two case statements with one code >>>> block. But you split them apart, so needed to duplicate the >>>> dsa_port_link_register. >>>> >>>> Unfortunately, you forgot to add a 'break;', so it still falls >>>> through, and overwrites the port flavour to DSA. >>> >>> ah, crap. Don't have hw to test this :/ >>> Will fix. Thanks! >> >> You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >> emulate a DSA switch. It won't create interconnect ports, since only one > > Hmm, trying to use dsa_loop. Doing: > modprobe dsa_loop > modprobe fixed_phy > > I don't see the netdevs. Any idea what am I doing wrong? Thanks! Yes, modprobe dsa-loop-bdinfo first, which will create the mdio_board_info and then modprobe dsa-loop. > > >> switch can be created with the method chosen, but this would have helped >> you catch the missing break since the "CPU" port would have been >> displayed as "DSA" anyway. >> >> If you need hardware, I am sure this can be somehow arranged. By that, I >> mean something on which you can run upstream Linux on without out of >> tree patches. >> -- >> Florian
Thu, May 17, 2018 at 04:08:10PM CEST, f.fainelli@gmail.com wrote: > > >On 05/17/2018 07:02 AM, Jiri Pirko wrote: >> Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >>> On 03/23/2018 07:49 AM, Jiri Pirko wrote: >>>> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>>>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>>>> From: Jiri Pirko <jiri@mellanox.com> >>>>>> >>>>>> Set the attrs and allow to expose port flavour to user via devlink. >>>>>> >>>>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>>>> --- >>>>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>>>> 1 file changed, 23 insertions(+) >>>>>> >>>>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>>>> index adf50fbc4c13..49453690696d 100644 >>>>>> --- a/net/dsa/dsa2.c >>>>>> +++ b/net/dsa/dsa2.c >>>>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>>>> case DSA_PORT_TYPE_UNUSED: >>>>>> break; >>>>>> case DSA_PORT_TYPE_CPU: >>>>>> + /* dp->index is used now as port_number. However >>>>>> + * CPU ports should have separate numbering >>>>>> + * independent from front panel port numbers. >>>>>> + */ >>>>>> + devlink_port_attrs_set(&dp->devlink_port, >>>>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>>>> + dp->index, false, 0); >>>>>> + err = dsa_port_link_register_of(dp); >>>>>> + if (err) { >>>>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>>>> + ds->index, dp->index); >>>>>> + return err; >>>>>> + } >>>>> >>>>> Ah, i get it. These used to be two case statements with one code >>>>> block. But you split them apart, so needed to duplicate the >>>>> dsa_port_link_register. >>>>> >>>>> Unfortunately, you forgot to add a 'break;', so it still falls >>>>> through, and overwrites the port flavour to DSA. >>>> >>>> ah, crap. Don't have hw to test this :/ >>>> Will fix. Thanks! >>> >>> You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >>> emulate a DSA switch. It won't create interconnect ports, since only one >> >> Hmm, trying to use dsa_loop. Doing: >> modprobe dsa_loop >> modprobe fixed_phy >> >> I don't see the netdevs. Any idea what am I doing wrong? Thanks! > >Yes, modprobe dsa-loop-bdinfo first, which will create the That is compiled inside "fixed_phy", isn't it? In my case, "Module fixed_phy is builtin" So it should be enough just to "modprobe dsa_loop", right? That does not work :/ >mdio_board_info and then modprobe dsa-loop. > >> >> >>> switch can be created with the method chosen, but this would have helped >>> you catch the missing break since the "CPU" port would have been >>> displayed as "DSA" anyway. >>> >>> If you need hardware, I am sure this can be somehow arranged. By that, I >>> mean something on which you can run upstream Linux on without out of >>> tree patches. >>> -- >>> Florian > >-- >Florian
> >Yes, modprobe dsa-loop-bdinfo first, which will create the > > That is compiled inside "fixed_phy", isn't it? Nope. It follows a pattern seen with I2C and SPI subsystem. A bus driver provides a bus to Linux. But i2c and SPI, unlike PCI or USB, you cannot enumerate the devices on the bus, you need to know what devices are there. So the board file registers an info structure, listing what devices are on the bus. When the bus pops into existence, the core links the bus to the info structure about devices on the bus and then probes the devices. The same is happening here. The fixed_phy driver provides an MDIO bus. The info structure in dsa-loop-bdinfo says there is an dsa-loop device at address 31 on that bus. Combine the two causes the dsa-loop device to actually probe. Andrew
On 05/17/2018 07:30 AM, Jiri Pirko wrote: > Thu, May 17, 2018 at 04:08:10PM CEST, f.fainelli@gmail.com wrote: >> >> >> On 05/17/2018 07:02 AM, Jiri Pirko wrote: >>> Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >>>> On 03/23/2018 07:49 AM, Jiri Pirko wrote: >>>>> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>>>>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>>>>> From: Jiri Pirko <jiri@mellanox.com> >>>>>>> >>>>>>> Set the attrs and allow to expose port flavour to user via devlink. >>>>>>> >>>>>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>>>>> --- >>>>>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>>>>> 1 file changed, 23 insertions(+) >>>>>>> >>>>>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>>>>> index adf50fbc4c13..49453690696d 100644 >>>>>>> --- a/net/dsa/dsa2.c >>>>>>> +++ b/net/dsa/dsa2.c >>>>>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>>>>> case DSA_PORT_TYPE_UNUSED: >>>>>>> break; >>>>>>> case DSA_PORT_TYPE_CPU: >>>>>>> + /* dp->index is used now as port_number. However >>>>>>> + * CPU ports should have separate numbering >>>>>>> + * independent from front panel port numbers. >>>>>>> + */ >>>>>>> + devlink_port_attrs_set(&dp->devlink_port, >>>>>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>>>>> + dp->index, false, 0); >>>>>>> + err = dsa_port_link_register_of(dp); >>>>>>> + if (err) { >>>>>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>>>>> + ds->index, dp->index); >>>>>>> + return err; >>>>>>> + } >>>>>> >>>>>> Ah, i get it. These used to be two case statements with one code >>>>>> block. But you split them apart, so needed to duplicate the >>>>>> dsa_port_link_register. >>>>>> >>>>>> Unfortunately, you forgot to add a 'break;', so it still falls >>>>>> through, and overwrites the port flavour to DSA. >>>>> >>>>> ah, crap. Don't have hw to test this :/ >>>>> Will fix. Thanks! >>>> >>>> You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >>>> emulate a DSA switch. It won't create interconnect ports, since only one >>> >>> Hmm, trying to use dsa_loop. Doing: >>> modprobe dsa_loop >>> modprobe fixed_phy >>> >>> I don't see the netdevs. Any idea what am I doing wrong? Thanks! >> >> Yes, modprobe dsa-loop-bdinfo first, which will create the > > That is compiled inside "fixed_phy", isn't it? It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes built-in, if is modular, it is also modular, this was fixed with 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY") > In my case, "Module fixed_phy is builtin" > So it should be enough just to "modprobe dsa_loop", right? That does not > work :/ There is a caveat that if you have everything modular, if you loaded fixed_phy first, and forgot to load dsa-loop-bdinfo, then nothing will happen because the MDIO bus was created and there were no matching devices. Send me your .config and I will take a look. Attached is mine (64Bit x86 VM), start with:
Thu, May 17, 2018 at 04:48:28PM CEST, andrew@lunn.ch wrote: >> >Yes, modprobe dsa-loop-bdinfo first, which will create the >> >> That is compiled inside "fixed_phy", isn't it? > >Nope. > >It follows a pattern seen with I2C and SPI subsystem. A bus driver >provides a bus to Linux. But i2c and SPI, unlike PCI or USB, you >cannot enumerate the devices on the bus, you need to know what devices >are there. So the board file registers an info structure, listing what >devices are on the bus. When the bus pops into existence, the core >links the bus to the info structure about devices on the bus and then >probes the devices. > >The same is happening here. The fixed_phy driver provides an MDIO bus. > >The info structure in dsa-loop-bdinfo says there is an dsa-loop device >at address 31 on that bus. > >Combine the two causes the dsa-loop device to actually probe. I understand. Yet I have no dsa_loop_bdinfo.ko module. In my .config I have: CONFIG_FIXED_PHY=y CONFIG_NET_DSA_LOOP=m I had to do this: diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 15c2a831edf1..2d773d3a7d49 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -2,9 +2,7 @@ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm-sf2.o bcm-sf2-objs := bcm_sf2.o bcm_sf2_cfp.o obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o -ifdef CONFIG_NET_DSA_LOOP -obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdinfo.o -endif +obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop_bdinfo.o obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o Now dsa_loop_bdinfo.ko gets compiled. I have no clue why it does not work without the patch :O "obj-$(CONFIG_FIXED_PHY)" doesn't work.
Thu, May 17, 2018 at 04:51:17PM CEST, f.fainelli@gmail.com wrote: > > >On 05/17/2018 07:30 AM, Jiri Pirko wrote: >> Thu, May 17, 2018 at 04:08:10PM CEST, f.fainelli@gmail.com wrote: >>> >>> >>> On 05/17/2018 07:02 AM, Jiri Pirko wrote: >>>> Fri, Mar 23, 2018 at 06:09:29PM CET, f.fainelli@gmail.com wrote: >>>>> On 03/23/2018 07:49 AM, Jiri Pirko wrote: >>>>>> Fri, Mar 23, 2018 at 02:30:02PM CET, andrew@lunn.ch wrote: >>>>>>> On Thu, Mar 22, 2018 at 11:55:14AM +0100, Jiri Pirko wrote: >>>>>>>> From: Jiri Pirko <jiri@mellanox.com> >>>>>>>> >>>>>>>> Set the attrs and allow to expose port flavour to user via devlink. >>>>>>>> >>>>>>>> Signed-off-by: Jiri Pirko <jiri@mellanox.com> >>>>>>>> --- >>>>>>>> net/dsa/dsa2.c | 23 +++++++++++++++++++++++ >>>>>>>> 1 file changed, 23 insertions(+) >>>>>>>> >>>>>>>> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >>>>>>>> index adf50fbc4c13..49453690696d 100644 >>>>>>>> --- a/net/dsa/dsa2.c >>>>>>>> +++ b/net/dsa/dsa2.c >>>>>>>> @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) >>>>>>>> case DSA_PORT_TYPE_UNUSED: >>>>>>>> break; >>>>>>>> case DSA_PORT_TYPE_CPU: >>>>>>>> + /* dp->index is used now as port_number. However >>>>>>>> + * CPU ports should have separate numbering >>>>>>>> + * independent from front panel port numbers. >>>>>>>> + */ >>>>>>>> + devlink_port_attrs_set(&dp->devlink_port, >>>>>>>> + DEVLINK_PORT_FLAVOUR_CPU, >>>>>>>> + dp->index, false, 0); >>>>>>>> + err = dsa_port_link_register_of(dp); >>>>>>>> + if (err) { >>>>>>>> + dev_err(ds->dev, "failed to setup link for port %d.%d\n", >>>>>>>> + ds->index, dp->index); >>>>>>>> + return err; >>>>>>>> + } >>>>>>> >>>>>>> Ah, i get it. These used to be two case statements with one code >>>>>>> block. But you split them apart, so needed to duplicate the >>>>>>> dsa_port_link_register. >>>>>>> >>>>>>> Unfortunately, you forgot to add a 'break;', so it still falls >>>>>>> through, and overwrites the port flavour to DSA. >>>>>> >>>>>> ah, crap. Don't have hw to test this :/ >>>>>> Will fix. Thanks! >>>>> >>>>> You don't need hardware, there is drivers/net/dsa/dsa_loop.c which will >>>>> emulate a DSA switch. It won't create interconnect ports, since only one >>>> >>>> Hmm, trying to use dsa_loop. Doing: >>>> modprobe dsa_loop >>>> modprobe fixed_phy >>>> >>>> I don't see the netdevs. Any idea what am I doing wrong? Thanks! >>> >>> Yes, modprobe dsa-loop-bdinfo first, which will create the >> >> That is compiled inside "fixed_phy", isn't it? > >It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >built-in, if is modular, it is also modular, this was fixed with >40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >dsa-loop dependency on FIXED_PHY") Now I have it compiled as module, and after modprobe dsa_loop I see: [ 1168.129202] libphy: Fixed MDIO Bus: probed [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f This messages I did not see when I had fixed_phy compiled as buildin. But I still see no netdevs :/ > >> In my case, "Module fixed_phy is builtin" >> So it should be enough just to "modprobe dsa_loop", right? That does not >> work :/ > >There is a caveat that if you have everything modular, if you loaded >fixed_phy first, and forgot to load dsa-loop-bdinfo, then nothing will >happen because the MDIO bus was created and there were no matching devices. > >Send me your .config and I will take a look. Attached is mine (64Bit x86 >VM), start with: >-- >Florian ># ># Automatically generated file; DO NOT EDIT. ># Linux/x86 4.15.0-rc2 Kernel Configuration ># >CONFIG_64BIT=y >CONFIG_X86_64=y >CONFIG_X86=y >CONFIG_INSTRUCTION_DECODER=y >CONFIG_OUTPUT_FORMAT="elf64-x86-64" >CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" >CONFIG_LOCKDEP_SUPPORT=y >CONFIG_STACKTRACE_SUPPORT=y >CONFIG_MMU=y >CONFIG_ARCH_MMAP_RND_BITS_MIN=28 >CONFIG_ARCH_MMAP_RND_BITS_MAX=32 >CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 >CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 >CONFIG_NEED_DMA_MAP_STATE=y >CONFIG_NEED_SG_DMA_LENGTH=y >CONFIG_GENERIC_ISA_DMA=y >CONFIG_GENERIC_BUG=y >CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y >CONFIG_GENERIC_HWEIGHT=y >CONFIG_ARCH_MAY_HAVE_PC_FDC=y >CONFIG_RWSEM_XCHGADD_ALGORITHM=y >CONFIG_GENERIC_CALIBRATE_DELAY=y >CONFIG_ARCH_HAS_CPU_RELAX=y >CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y >CONFIG_HAVE_SETUP_PER_CPU_AREA=y >CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y >CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y >CONFIG_ARCH_HIBERNATION_POSSIBLE=y >CONFIG_ARCH_SUSPEND_POSSIBLE=y >CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y >CONFIG_ARCH_WANT_GENERAL_HUGETLB=y >CONFIG_ZONE_DMA32=y >CONFIG_AUDIT_ARCH=y >CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y >CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y >CONFIG_X86_64_SMP=y >CONFIG_ARCH_SUPPORTS_UPROBES=y >CONFIG_FIX_EARLYCON_MEM=y >CONFIG_PGTABLE_LEVELS=4 >CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" >CONFIG_IRQ_WORK=y >CONFIG_BUILDTIME_EXTABLE_SORT=y >CONFIG_THREAD_INFO_IN_TASK=y > ># ># General setup ># >CONFIG_INIT_ENV_ARG_LIMIT=32 >CONFIG_CROSS_COMPILE="" ># CONFIG_COMPILE_TEST is not set >CONFIG_LOCALVERSION="" >CONFIG_LOCALVERSION_AUTO=y >CONFIG_HAVE_KERNEL_GZIP=y >CONFIG_HAVE_KERNEL_BZIP2=y >CONFIG_HAVE_KERNEL_LZMA=y >CONFIG_HAVE_KERNEL_XZ=y >CONFIG_HAVE_KERNEL_LZO=y >CONFIG_HAVE_KERNEL_LZ4=y ># CONFIG_KERNEL_GZIP is not set ># CONFIG_KERNEL_BZIP2 is not set ># CONFIG_KERNEL_LZMA is not set >CONFIG_KERNEL_XZ=y ># CONFIG_KERNEL_LZO is not set ># CONFIG_KERNEL_LZ4 is not set >CONFIG_DEFAULT_HOSTNAME="(none)" >CONFIG_SWAP=y >CONFIG_SYSVIPC=y >CONFIG_SYSVIPC_SYSCTL=y >CONFIG_POSIX_MQUEUE=y >CONFIG_POSIX_MQUEUE_SYSCTL=y >CONFIG_CROSS_MEMORY_ATTACH=y ># CONFIG_USELIB is not set ># CONFIG_AUDIT is not set >CONFIG_HAVE_ARCH_AUDITSYSCALL=y > ># ># IRQ subsystem ># >CONFIG_GENERIC_IRQ_PROBE=y >CONFIG_GENERIC_IRQ_SHOW=y >CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y >CONFIG_GENERIC_PENDING_IRQ=y >CONFIG_GENERIC_IRQ_MIGRATION=y >CONFIG_IRQ_DOMAIN=y >CONFIG_IRQ_DOMAIN_HIERARCHY=y >CONFIG_GENERIC_MSI_IRQ=y >CONFIG_GENERIC_MSI_IRQ_DOMAIN=y >CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y >CONFIG_GENERIC_IRQ_RESERVATION_MODE=y ># CONFIG_IRQ_DOMAIN_DEBUG is not set >CONFIG_IRQ_FORCED_THREADING=y >CONFIG_SPARSE_IRQ=y ># CONFIG_GENERIC_IRQ_DEBUGFS is not set >CONFIG_CLOCKSOURCE_WATCHDOG=y >CONFIG_ARCH_CLOCKSOURCE_DATA=y >CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y >CONFIG_GENERIC_TIME_VSYSCALL=y >CONFIG_GENERIC_CLOCKEVENTS=y >CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y >CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y >CONFIG_GENERIC_CMOS_UPDATE=y > ># ># Timers subsystem ># >CONFIG_TICK_ONESHOT=y >CONFIG_NO_HZ_COMMON=y ># CONFIG_HZ_PERIODIC is not set >CONFIG_NO_HZ_IDLE=y ># CONFIG_NO_HZ_FULL is not set >CONFIG_NO_HZ=y >CONFIG_HIGH_RES_TIMERS=y > ># ># CPU/Task time and stats accounting ># >CONFIG_TICK_CPU_ACCOUNTING=y ># CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set >CONFIG_IRQ_TIME_ACCOUNTING=y ># CONFIG_BSD_PROCESS_ACCT is not set ># CONFIG_TASKSTATS is not set ># CONFIG_CPU_ISOLATION is not set > ># ># RCU Subsystem ># >CONFIG_TREE_RCU=y ># CONFIG_RCU_EXPERT is not set >CONFIG_SRCU=y >CONFIG_TREE_SRCU=y ># CONFIG_TASKS_RCU is not set >CONFIG_RCU_STALL_COMMON=y >CONFIG_RCU_NEED_SEGCBLIST=y ># CONFIG_BUILD_BIN2C is not set ># CONFIG_IKCONFIG is not set >CONFIG_LOG_BUF_SHIFT=16 >CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 >CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 >CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y >CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y >CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y >CONFIG_ARCH_SUPPORTS_INT128=y >CONFIG_CGROUPS=y ># CONFIG_MEMCG is not set ># CONFIG_BLK_CGROUP is not set ># CONFIG_CGROUP_SCHED is not set ># CONFIG_CGROUP_PIDS is not set ># CONFIG_CGROUP_RDMA is not set ># CONFIG_CGROUP_FREEZER is not set ># CONFIG_CPUSETS is not set ># CONFIG_CGROUP_DEVICE is not set ># CONFIG_CGROUP_CPUACCT is not set ># CONFIG_CGROUP_PERF is not set ># CONFIG_CGROUP_DEBUG is not set ># CONFIG_SOCK_CGROUP_DATA is not set ># CONFIG_NAMESPACES is not set ># CONFIG_SCHED_AUTOGROUP is not set ># CONFIG_SYSFS_DEPRECATED is not set >CONFIG_RELAY=y >CONFIG_BLK_DEV_INITRD=y >CONFIG_INITRAMFS_SOURCE="" >CONFIG_RD_GZIP=y >CONFIG_RD_BZIP2=y >CONFIG_RD_LZMA=y >CONFIG_RD_XZ=y >CONFIG_RD_LZO=y >CONFIG_RD_LZ4=y >CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y ># CONFIG_CC_OPTIMIZE_FOR_SIZE is not set >CONFIG_SYSCTL=y >CONFIG_ANON_INODES=y >CONFIG_HAVE_UID16=y >CONFIG_SYSCTL_EXCEPTION_TRACE=y >CONFIG_HAVE_PCSPKR_PLATFORM=y >CONFIG_BPF=y >CONFIG_EXPERT=y >CONFIG_UID16=y >CONFIG_MULTIUSER=y ># CONFIG_SGETMASK_SYSCALL is not set >CONFIG_SYSFS_SYSCALL=y ># CONFIG_SYSCTL_SYSCALL is not set >CONFIG_FHANDLE=y >CONFIG_POSIX_TIMERS=y >CONFIG_PRINTK=y >CONFIG_PRINTK_NMI=y >CONFIG_BUG=y >CONFIG_ELF_CORE=y >CONFIG_PCSPKR_PLATFORM=y >CONFIG_BASE_FULL=y >CONFIG_FUTEX=y >CONFIG_FUTEX_PI=y >CONFIG_EPOLL=y >CONFIG_SIGNALFD=y >CONFIG_TIMERFD=y >CONFIG_EVENTFD=y >CONFIG_SHMEM=y >CONFIG_AIO=y >CONFIG_ADVISE_SYSCALLS=y >CONFIG_MEMBARRIER=y ># CONFIG_CHECKPOINT_RESTORE is not set >CONFIG_KALLSYMS=y >CONFIG_KALLSYMS_ALL=y >CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y >CONFIG_KALLSYMS_BASE_RELATIVE=y ># CONFIG_BPF_SYSCALL is not set ># CONFIG_USERFAULTFD is not set >CONFIG_EMBEDDED=y >CONFIG_HAVE_PERF_EVENTS=y ># CONFIG_PC104 is not set > ># ># Kernel Performance Events And Counters ># >CONFIG_PERF_EVENTS=y ># CONFIG_DEBUG_PERF_USE_VMALLOC is not set >CONFIG_VM_EVENT_COUNTERS=y >CONFIG_COMPAT_BRK=y >CONFIG_SLAB=y ># CONFIG_SLUB is not set ># CONFIG_SLOB is not set >CONFIG_SLAB_MERGE_DEFAULT=y ># CONFIG_SLAB_FREELIST_RANDOM is not set >CONFIG_SYSTEM_DATA_VERIFICATION=y ># CONFIG_PROFILING is not set >CONFIG_TRACEPOINTS=y >CONFIG_HAVE_OPROFILE=y >CONFIG_OPROFILE_NMI_TIMER=y ># CONFIG_KPROBES is not set ># CONFIG_JUMP_LABEL is not set >CONFIG_UPROBES=y ># CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set >CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y >CONFIG_ARCH_USE_BUILTIN_BSWAP=y >CONFIG_HAVE_IOREMAP_PROT=y >CONFIG_HAVE_KPROBES=y >CONFIG_HAVE_KRETPROBES=y >CONFIG_HAVE_OPTPROBES=y >CONFIG_HAVE_KPROBES_ON_FTRACE=y >CONFIG_HAVE_NMI=y >CONFIG_HAVE_ARCH_TRACEHOOK=y >CONFIG_HAVE_DMA_CONTIGUOUS=y >CONFIG_GENERIC_SMP_IDLE_THREAD=y >CONFIG_ARCH_HAS_FORTIFY_SOURCE=y >CONFIG_ARCH_HAS_SET_MEMORY=y >CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y >CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y >CONFIG_HAVE_CLK=y >CONFIG_HAVE_DMA_API_DEBUG=y >CONFIG_HAVE_HW_BREAKPOINT=y >CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y >CONFIG_HAVE_USER_RETURN_NOTIFIER=y >CONFIG_HAVE_PERF_EVENTS_NMI=y >CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y >CONFIG_HAVE_PERF_REGS=y >CONFIG_HAVE_PERF_USER_STACK_DUMP=y >CONFIG_HAVE_ARCH_JUMP_LABEL=y >CONFIG_HAVE_RCU_TABLE_FREE=y >CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y >CONFIG_HAVE_CMPXCHG_LOCAL=y >CONFIG_HAVE_CMPXCHG_DOUBLE=y >CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y >CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y >CONFIG_HAVE_ARCH_SECCOMP_FILTER=y >CONFIG_HAVE_GCC_PLUGINS=y ># CONFIG_GCC_PLUGINS is not set >CONFIG_HAVE_CC_STACKPROTECTOR=y >CONFIG_CC_STACKPROTECTOR=y ># CONFIG_CC_STACKPROTECTOR_NONE is not set >CONFIG_CC_STACKPROTECTOR_REGULAR=y ># CONFIG_CC_STACKPROTECTOR_STRONG is not set >CONFIG_THIN_ARCHIVES=y >CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y >CONFIG_HAVE_CONTEXT_TRACKING=y >CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y >CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y >CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y >CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y >CONFIG_HAVE_ARCH_HUGE_VMAP=y >CONFIG_HAVE_ARCH_SOFT_DIRTY=y >CONFIG_HAVE_MOD_ARCH_SPECIFIC=y >CONFIG_MODULES_USE_ELF_RELA=y >CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y >CONFIG_ARCH_HAS_ELF_RANDOMIZE=y >CONFIG_HAVE_ARCH_MMAP_RND_BITS=y >CONFIG_HAVE_EXIT_THREAD=y >CONFIG_ARCH_MMAP_RND_BITS=28 >CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y >CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 >CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y >CONFIG_HAVE_COPY_THREAD_TLS=y >CONFIG_HAVE_STACK_VALIDATION=y ># CONFIG_HAVE_ARCH_HASH is not set ># CONFIG_ISA_BUS_API is not set >CONFIG_OLD_SIGSUSPEND3=y >CONFIG_COMPAT_OLD_SIGACTION=y ># CONFIG_CPU_NO_EFFICIENT_FFS is not set >CONFIG_HAVE_ARCH_VMAP_STACK=y >CONFIG_VMAP_STACK=y ># CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set ># CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set >CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y >CONFIG_STRICT_KERNEL_RWX=y >CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y >CONFIG_STRICT_MODULE_RWX=y >CONFIG_ARCH_HAS_REFCOUNT=y ># CONFIG_REFCOUNT_FULL is not set > ># ># GCOV-based kernel profiling ># ># CONFIG_GCOV_KERNEL is not set >CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y ># CONFIG_HAVE_GENERIC_DMA_COHERENT is not set >CONFIG_RT_MUTEXES=y >CONFIG_BASE_SMALL=0 >CONFIG_MODULES=y >CONFIG_MODULE_FORCE_LOAD=y >CONFIG_MODULE_UNLOAD=y ># CONFIG_MODULE_FORCE_UNLOAD is not set >CONFIG_MODVERSIONS=y ># CONFIG_MODULE_SRCVERSION_ALL is not set ># CONFIG_MODULE_SIG is not set ># CONFIG_MODULE_COMPRESS is not set ># CONFIG_TRIM_UNUSED_KSYMS is not set >CONFIG_MODULES_TREE_LOOKUP=y >CONFIG_BLOCK=y >CONFIG_BLK_SCSI_REQUEST=y >CONFIG_BLK_DEV_BSG=y ># CONFIG_BLK_DEV_BSGLIB is not set ># CONFIG_BLK_DEV_INTEGRITY is not set ># CONFIG_BLK_DEV_ZONED is not set ># CONFIG_BLK_CMDLINE_PARSER is not set ># CONFIG_BLK_WBT is not set >CONFIG_BLK_DEBUG_FS=y ># CONFIG_BLK_SED_OPAL is not set > ># ># Partition Types ># >CONFIG_PARTITION_ADVANCED=y ># CONFIG_ACORN_PARTITION is not set ># CONFIG_AIX_PARTITION is not set ># CONFIG_OSF_PARTITION is not set ># CONFIG_AMIGA_PARTITION is not set ># CONFIG_ATARI_PARTITION is not set ># CONFIG_MAC_PARTITION is not set >CONFIG_MSDOS_PARTITION=y ># CONFIG_BSD_DISKLABEL is not set ># CONFIG_MINIX_SUBPARTITION is not set ># CONFIG_SOLARIS_X86_PARTITION is not set ># CONFIG_UNIXWARE_DISKLABEL is not set ># CONFIG_LDM_PARTITION is not set ># CONFIG_SGI_PARTITION is not set ># CONFIG_ULTRIX_PARTITION is not set ># CONFIG_SUN_PARTITION is not set ># CONFIG_KARMA_PARTITION is not set >CONFIG_EFI_PARTITION=y ># CONFIG_SYSV68_PARTITION is not set ># CONFIG_CMDLINE_PARTITION is not set >CONFIG_BLOCK_COMPAT=y >CONFIG_BLK_MQ_PCI=y > ># ># IO Schedulers ># >CONFIG_IOSCHED_NOOP=y >CONFIG_IOSCHED_DEADLINE=y >CONFIG_IOSCHED_CFQ=y ># CONFIG_DEFAULT_DEADLINE is not set >CONFIG_DEFAULT_CFQ=y ># CONFIG_DEFAULT_NOOP is not set >CONFIG_DEFAULT_IOSCHED="cfq" >CONFIG_MQ_IOSCHED_DEADLINE=y >CONFIG_MQ_IOSCHED_KYBER=y ># CONFIG_IOSCHED_BFQ is not set >CONFIG_ASN1=y >CONFIG_UNINLINE_SPIN_UNLOCK=y >CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y >CONFIG_MUTEX_SPIN_ON_OWNER=y >CONFIG_RWSEM_SPIN_ON_OWNER=y >CONFIG_LOCK_SPIN_ON_OWNER=y >CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y >CONFIG_QUEUED_SPINLOCKS=y >CONFIG_ARCH_USE_QUEUED_RWLOCKS=y >CONFIG_QUEUED_RWLOCKS=y ># CONFIG_FREEZER is not set > ># ># Processor type and features ># >CONFIG_ZONE_DMA=y >CONFIG_SMP=y >CONFIG_X86_FEATURE_NAMES=y >CONFIG_X86_FAST_FEATURE_TESTS=y >CONFIG_X86_MPPARSE=y ># CONFIG_GOLDFISH is not set ># CONFIG_INTEL_RDT is not set >CONFIG_X86_EXTENDED_PLATFORM=y ># CONFIG_X86_VSMP is not set ># CONFIG_X86_GOLDFISH is not set ># CONFIG_IOSF_MBI is not set >CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y >CONFIG_SCHED_OMIT_FRAME_POINTER=y ># CONFIG_HYPERVISOR_GUEST is not set >CONFIG_NO_BOOTMEM=y ># CONFIG_MK8 is not set ># CONFIG_MPSC is not set ># CONFIG_MCORE2 is not set ># CONFIG_MATOM is not set >CONFIG_GENERIC_CPU=y >CONFIG_X86_INTERNODE_CACHE_SHIFT=6 >CONFIG_X86_L1_CACHE_SHIFT=6 >CONFIG_X86_TSC=y >CONFIG_X86_CMPXCHG64=y >CONFIG_X86_CMOV=y >CONFIG_X86_MINIMUM_CPU_FAMILY=64 >CONFIG_X86_DEBUGCTLMSR=y ># CONFIG_PROCESSOR_SELECT is not set >CONFIG_CPU_SUP_INTEL=y >CONFIG_CPU_SUP_AMD=y >CONFIG_CPU_SUP_CENTAUR=y >CONFIG_HPET_TIMER=y >CONFIG_DMI=y ># CONFIG_GART_IOMMU is not set ># CONFIG_CALGARY_IOMMU is not set >CONFIG_SWIOTLB=y >CONFIG_IOMMU_HELPER=y ># CONFIG_MAXSMP is not set >CONFIG_NR_CPUS=4 ># CONFIG_SCHED_SMT is not set ># CONFIG_SCHED_MC is not set >CONFIG_PREEMPT_NONE=y ># CONFIG_PREEMPT_VOLUNTARY is not set ># CONFIG_PREEMPT is not set >CONFIG_PREEMPT_COUNT=y >CONFIG_X86_LOCAL_APIC=y >CONFIG_X86_IO_APIC=y ># CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set >CONFIG_X86_MCE=y ># CONFIG_X86_MCELOG_LEGACY is not set >CONFIG_X86_MCE_INTEL=y >CONFIG_X86_MCE_AMD=y >CONFIG_X86_MCE_THRESHOLD=y ># CONFIG_X86_MCE_INJECT is not set >CONFIG_X86_THERMAL_VECTOR=y > ># ># Performance monitoring ># >CONFIG_PERF_EVENTS_INTEL_UNCORE=y >CONFIG_PERF_EVENTS_INTEL_RAPL=y >CONFIG_PERF_EVENTS_INTEL_CSTATE=y ># CONFIG_PERF_EVENTS_AMD_POWER is not set ># CONFIG_VM86 is not set >CONFIG_X86_16BIT=y >CONFIG_X86_ESPFIX64=y >CONFIG_X86_VSYSCALL_EMULATION=y ># CONFIG_I8K is not set >CONFIG_MICROCODE=y >CONFIG_MICROCODE_INTEL=y ># CONFIG_MICROCODE_AMD is not set >CONFIG_MICROCODE_OLD_INTERFACE=y ># CONFIG_X86_MSR is not set ># CONFIG_X86_CPUID is not set ># CONFIG_X86_5LEVEL is not set >CONFIG_ARCH_PHYS_ADDR_T_64BIT=y >CONFIG_ARCH_DMA_ADDR_T_64BIT=y >CONFIG_X86_DIRECT_GBPAGES=y >CONFIG_ARCH_HAS_MEM_ENCRYPT=y ># CONFIG_AMD_MEM_ENCRYPT is not set ># CONFIG_NUMA is not set >CONFIG_ARCH_SPARSEMEM_ENABLE=y >CONFIG_ARCH_SPARSEMEM_DEFAULT=y >CONFIG_ARCH_SELECT_MEMORY_MODEL=y >CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 >CONFIG_SELECT_MEMORY_MODEL=y >CONFIG_SPARSEMEM_MANUAL=y >CONFIG_SPARSEMEM=y >CONFIG_HAVE_MEMORY_PRESENT=y >CONFIG_SPARSEMEM_EXTREME=y >CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y >CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y >CONFIG_SPARSEMEM_VMEMMAP=y >CONFIG_HAVE_MEMBLOCK=y >CONFIG_HAVE_MEMBLOCK_NODE_MAP=y >CONFIG_HAVE_GENERIC_GUP=y >CONFIG_ARCH_DISCARD_MEMBLOCK=y >CONFIG_MEMORY_ISOLATION=y ># CONFIG_HAVE_BOOTMEM_INFO_NODE is not set ># CONFIG_MEMORY_HOTPLUG is not set >CONFIG_SPLIT_PTLOCK_CPUS=4 >CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y >CONFIG_COMPACTION=y >CONFIG_MIGRATION=y >CONFIG_PHYS_ADDR_T_64BIT=y >CONFIG_BOUNCE=y >CONFIG_VIRT_TO_BUS=y ># CONFIG_KSM is not set >CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 >CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y ># CONFIG_MEMORY_FAILURE is not set ># CONFIG_TRANSPARENT_HUGEPAGE is not set >CONFIG_ARCH_WANTS_THP_SWAP=y ># CONFIG_CLEANCACHE is not set ># CONFIG_FRONTSWAP is not set >CONFIG_CMA=y ># CONFIG_CMA_DEBUG is not set ># CONFIG_CMA_DEBUGFS is not set >CONFIG_CMA_AREAS=7 ># CONFIG_ZPOOL is not set ># CONFIG_ZBUD is not set ># CONFIG_ZSMALLOC is not set >CONFIG_GENERIC_EARLY_IOREMAP=y >CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y ># CONFIG_IDLE_PAGE_TRACKING is not set >CONFIG_ARCH_HAS_ZONE_DEVICE=y >CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y >CONFIG_ARCH_HAS_PKEYS=y ># CONFIG_PERCPU_STATS is not set ># CONFIG_GUP_BENCHMARK is not set ># CONFIG_X86_PMEM_LEGACY is not set ># CONFIG_X86_CHECK_BIOS_CORRUPTION is not set >CONFIG_X86_RESERVE_LOW=64 >CONFIG_MTRR=y >CONFIG_MTRR_SANITIZER=y >CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 >CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 >CONFIG_X86_PAT=y >CONFIG_ARCH_USES_PG_UNCACHED=y >CONFIG_ARCH_RANDOM=y >CONFIG_X86_SMAP=y >CONFIG_X86_INTEL_UMIP=y ># CONFIG_X86_INTEL_MPX is not set >CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y ># CONFIG_SECCOMP is not set ># CONFIG_HZ_100 is not set ># CONFIG_HZ_250 is not set ># CONFIG_HZ_300 is not set >CONFIG_HZ_1000=y >CONFIG_HZ=1000 >CONFIG_SCHED_HRTICK=y ># CONFIG_KEXEC is not set ># CONFIG_KEXEC_FILE is not set ># CONFIG_CRASH_DUMP is not set >CONFIG_PHYSICAL_START=0x1000000 >CONFIG_RELOCATABLE=y >CONFIG_RANDOMIZE_BASE=y >CONFIG_X86_NEED_RELOCS=y >CONFIG_PHYSICAL_ALIGN=0x200000 >CONFIG_RANDOMIZE_MEMORY=y >CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0 >CONFIG_HOTPLUG_CPU=y ># CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set ># CONFIG_DEBUG_HOTPLUG_CPU0 is not set ># CONFIG_COMPAT_VDSO is not set ># CONFIG_LEGACY_VSYSCALL_NATIVE is not set >CONFIG_LEGACY_VSYSCALL_EMULATE=y ># CONFIG_LEGACY_VSYSCALL_NONE is not set ># CONFIG_CMDLINE_BOOL is not set >CONFIG_MODIFY_LDT_SYSCALL=y >CONFIG_HAVE_LIVEPATCH=y >CONFIG_ARCH_HAS_ADD_PAGES=y >CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y > ># ># Power management and ACPI options ># ># CONFIG_SUSPEND is not set ># CONFIG_HIBERNATION is not set ># CONFIG_PM is not set ># CONFIG_ACPI is not set ># CONFIG_SFI is not set > ># ># CPU Frequency scaling ># ># CONFIG_CPU_FREQ is not set > ># ># CPU Idle ># ># CONFIG_CPU_IDLE is not set ># CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set > ># ># Bus options (PCI etc.) ># >CONFIG_PCI=y >CONFIG_PCI_DIRECT=y >CONFIG_PCI_DOMAINS=y ># CONFIG_PCI_CNB20LE_QUIRK is not set >CONFIG_PCIEPORTBUS=y ># CONFIG_PCIEAER is not set >CONFIG_PCIEASPM=y ># CONFIG_PCIEASPM_DEBUG is not set >CONFIG_PCIEASPM_DEFAULT=y ># CONFIG_PCIEASPM_POWERSAVE is not set ># CONFIG_PCIEASPM_POWER_SUPERSAVE is not set ># CONFIG_PCIEASPM_PERFORMANCE is not set ># CONFIG_PCIE_DPC is not set ># CONFIG_PCIE_PTM is not set >CONFIG_PCI_BUS_ADDR_T_64BIT=y >CONFIG_PCI_MSI=y >CONFIG_PCI_MSI_IRQ_DOMAIN=y >CONFIG_PCI_QUIRKS=y ># CONFIG_PCI_DEBUG is not set ># CONFIG_PCI_STUB is not set >CONFIG_PCI_LOCKLESS_CONFIG=y ># CONFIG_PCI_IOV is not set ># CONFIG_PCI_PRI is not set ># CONFIG_PCI_PASID is not set >CONFIG_PCI_LABEL=y ># CONFIG_HOTPLUG_PCI is not set > ># ># DesignWare PCI Core Support ># ># CONFIG_PCIE_DW_PLAT is not set > ># ># PCI host controller drivers ># ># CONFIG_VMD is not set > ># ># PCI Endpoint ># ># CONFIG_PCI_ENDPOINT is not set > ># ># PCI switch controller drivers ># ># CONFIG_PCI_SW_SWITCHTEC is not set ># CONFIG_ISA_BUS is not set >CONFIG_ISA_DMA_API=y >CONFIG_AMD_NB=y ># CONFIG_PCCARD is not set ># CONFIG_RAPIDIO is not set ># CONFIG_X86_SYSFB is not set > ># ># Executable file formats / Emulations ># >CONFIG_BINFMT_ELF=y >CONFIG_COMPAT_BINFMT_ELF=y >CONFIG_ELFCORE=y >CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y >CONFIG_BINFMT_SCRIPT=y ># CONFIG_HAVE_AOUT is not set ># CONFIG_BINFMT_MISC is not set >CONFIG_COREDUMP=y >CONFIG_IA32_EMULATION=y >CONFIG_IA32_AOUT=y >CONFIG_X86_X32=y >CONFIG_COMPAT_32=y >CONFIG_COMPAT=y >CONFIG_COMPAT_FOR_U64_ALIGNMENT=y >CONFIG_SYSVIPC_COMPAT=y >CONFIG_X86_DEV_DMA_OPS=y >CONFIG_NET=y > ># ># Networking options ># >CONFIG_PACKET=y ># CONFIG_PACKET_DIAG is not set >CONFIG_UNIX=y ># CONFIG_UNIX_DIAG is not set ># CONFIG_TLS is not set ># CONFIG_XFRM_USER is not set ># CONFIG_NET_KEY is not set >CONFIG_INET=y >CONFIG_IP_MULTICAST=y ># CONFIG_IP_ADVANCED_ROUTER is not set >CONFIG_IP_PNP=y >CONFIG_IP_PNP_DHCP=y >CONFIG_IP_PNP_BOOTP=y >CONFIG_IP_PNP_RARP=y ># CONFIG_NET_IPIP is not set ># CONFIG_NET_IPGRE_DEMUX is not set ># CONFIG_NET_IP_TUNNEL is not set >CONFIG_IP_MROUTE=y >CONFIG_IP_PIMSM_V1=y >CONFIG_IP_PIMSM_V2=y ># CONFIG_SYN_COOKIES is not set ># CONFIG_NET_UDP_TUNNEL is not set ># CONFIG_NET_FOU is not set ># CONFIG_INET_AH is not set ># CONFIG_INET_ESP is not set ># CONFIG_INET_IPCOMP is not set ># CONFIG_INET_XFRM_TUNNEL is not set ># CONFIG_INET_TUNNEL is not set ># CONFIG_INET_XFRM_MODE_TRANSPORT is not set ># CONFIG_INET_XFRM_MODE_TUNNEL is not set ># CONFIG_INET_XFRM_MODE_BEET is not set >CONFIG_INET_DIAG=y >CONFIG_INET_TCP_DIAG=y >CONFIG_INET_UDP_DIAG=y ># CONFIG_INET_RAW_DIAG is not set ># CONFIG_INET_DIAG_DESTROY is not set >CONFIG_TCP_CONG_ADVANCED=y >CONFIG_TCP_CONG_BIC=y >CONFIG_TCP_CONG_CUBIC=y ># CONFIG_TCP_CONG_WESTWOOD is not set ># CONFIG_TCP_CONG_HTCP is not set ># CONFIG_TCP_CONG_HSTCP is not set ># CONFIG_TCP_CONG_HYBLA is not set ># CONFIG_TCP_CONG_VEGAS is not set ># CONFIG_TCP_CONG_NV is not set ># CONFIG_TCP_CONG_SCALABLE is not set ># CONFIG_TCP_CONG_LP is not set ># CONFIG_TCP_CONG_VENO is not set ># CONFIG_TCP_CONG_YEAH is not set ># CONFIG_TCP_CONG_ILLINOIS is not set ># CONFIG_TCP_CONG_DCTCP is not set ># CONFIG_TCP_CONG_CDG is not set ># CONFIG_TCP_CONG_BBR is not set ># CONFIG_DEFAULT_BIC is not set >CONFIG_DEFAULT_CUBIC=y ># CONFIG_DEFAULT_RENO is not set >CONFIG_DEFAULT_TCP_CONG="cubic" ># CONFIG_TCP_MD5SIG is not set ># CONFIG_IPV6 is not set ># CONFIG_NETWORK_SECMARK is not set >CONFIG_NET_PTP_CLASSIFY=y ># CONFIG_NETWORK_PHY_TIMESTAMPING is not set ># CONFIG_NETFILTER is not set ># CONFIG_IP_DCCP is not set ># CONFIG_IP_SCTP is not set ># CONFIG_RDS is not set ># CONFIG_TIPC is not set ># CONFIG_ATM is not set ># CONFIG_L2TP is not set >CONFIG_STP=y >CONFIG_BRIDGE=y >CONFIG_BRIDGE_IGMP_SNOOPING=y >CONFIG_BRIDGE_VLAN_FILTERING=y >CONFIG_HAVE_NET_DSA=y >CONFIG_NET_DSA=y >CONFIG_NET_DSA_LEGACY=y >CONFIG_NET_DSA_TAG_BRCM=y >CONFIG_NET_DSA_TAG_BRCM_PREPEND=y >CONFIG_NET_DSA_TAG_DSA=y >CONFIG_NET_DSA_TAG_EDSA=y >CONFIG_NET_DSA_TAG_KSZ=y >CONFIG_NET_DSA_TAG_LAN9303=y >CONFIG_NET_DSA_TAG_MTK=y >CONFIG_NET_DSA_TAG_TRAILER=y >CONFIG_NET_DSA_TAG_QCA=y >CONFIG_VLAN_8021Q=y ># CONFIG_VLAN_8021Q_GVRP is not set ># CONFIG_VLAN_8021Q_MVRP is not set ># CONFIG_DECNET is not set >CONFIG_LLC=y ># CONFIG_LLC2 is not set ># CONFIG_IPX is not set ># CONFIG_ATALK is not set ># CONFIG_X25 is not set ># CONFIG_LAPB is not set ># CONFIG_PHONET is not set ># CONFIG_IEEE802154 is not set ># CONFIG_NET_SCHED is not set ># CONFIG_DCB is not set >CONFIG_DNS_RESOLVER=y ># CONFIG_BATMAN_ADV is not set ># CONFIG_OPENVSWITCH is not set ># CONFIG_VSOCKETS is not set ># CONFIG_NETLINK_DIAG is not set ># CONFIG_MPLS is not set ># CONFIG_NET_NSH is not set ># CONFIG_HSR is not set >CONFIG_NET_SWITCHDEV=y ># CONFIG_NET_L3_MASTER_DEV is not set ># CONFIG_NET_NCSI is not set >CONFIG_RPS=y >CONFIG_RFS_ACCEL=y >CONFIG_XPS=y ># CONFIG_CGROUP_NET_PRIO is not set ># CONFIG_CGROUP_NET_CLASSID is not set >CONFIG_NET_RX_BUSY_POLL=y >CONFIG_BQL=y ># CONFIG_BPF_JIT is not set >CONFIG_NET_FLOW_LIMIT=y > ># ># Network testing ># ># CONFIG_NET_PKTGEN is not set ># CONFIG_NET_DROP_MONITOR is not set ># CONFIG_HAMRADIO is not set ># CONFIG_CAN is not set ># CONFIG_BT is not set ># CONFIG_AF_RXRPC is not set ># CONFIG_AF_KCM is not set ># CONFIG_STREAM_PARSER is not set >CONFIG_WIRELESS=y >CONFIG_CFG80211=y ># CONFIG_NL80211_TESTMODE is not set ># CONFIG_CFG80211_DEVELOPER_WARNINGS is not set ># CONFIG_CFG80211_CERTIFICATION_ONUS is not set >CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y >CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y >CONFIG_CFG80211_DEFAULT_PS=y ># CONFIG_CFG80211_DEBUGFS is not set >CONFIG_CFG80211_CRDA_SUPPORT=y ># CONFIG_CFG80211_WEXT is not set ># CONFIG_LIB80211 is not set ># CONFIG_MAC80211 is not set >CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 ># CONFIG_WIMAX is not set ># CONFIG_RFKILL is not set ># CONFIG_NET_9P is not set ># CONFIG_CAIF is not set ># CONFIG_CEPH_LIB is not set ># CONFIG_NFC is not set ># CONFIG_PSAMPLE is not set ># CONFIG_NET_IFE is not set ># CONFIG_LWTUNNEL is not set ># CONFIG_DST_CACHE is not set ># CONFIG_GRO_CELLS is not set ># CONFIG_NET_DEVLINK is not set >CONFIG_MAY_USE_DEVLINK=y >CONFIG_HAVE_EBPF_JIT=y > ># ># Device Drivers ># > ># ># Generic Driver Options ># >CONFIG_UEVENT_HELPER=y >CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" >CONFIG_DEVTMPFS=y >CONFIG_DEVTMPFS_MOUNT=y >CONFIG_STANDALONE=y >CONFIG_PREVENT_FIRMWARE_BUILD=y >CONFIG_FW_LOADER=y >CONFIG_FIRMWARE_IN_KERNEL=y >CONFIG_EXTRA_FIRMWARE="" ># CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set >CONFIG_ALLOW_DEV_COREDUMP=y ># CONFIG_DEBUG_DRIVER is not set ># CONFIG_DEBUG_DEVRES is not set ># CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set ># CONFIG_TEST_ASYNC_DRIVER_PROBE is not set ># CONFIG_SYS_HYPERVISOR is not set ># CONFIG_GENERIC_CPU_DEVICES is not set >CONFIG_GENERIC_CPU_AUTOPROBE=y >CONFIG_REGMAP=y >CONFIG_REGMAP_I2C=m ># CONFIG_DMA_SHARED_BUFFER is not set >CONFIG_DMA_CMA=y > ># ># Default contiguous memory area size: ># >CONFIG_CMA_SIZE_MBYTES=16 >CONFIG_CMA_SIZE_SEL_MBYTES=y ># CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set ># CONFIG_CMA_SIZE_SEL_MIN is not set ># CONFIG_CMA_SIZE_SEL_MAX is not set >CONFIG_CMA_ALIGNMENT=9 > ># ># Bus devices ># ># CONFIG_CONNECTOR is not set ># CONFIG_MTD is not set ># CONFIG_OF is not set >CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y ># CONFIG_PARPORT is not set >CONFIG_BLK_DEV=y ># CONFIG_BLK_DEV_NULL_BLK is not set ># CONFIG_BLK_DEV_FD is not set >CONFIG_CDROM=y ># CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set ># CONFIG_BLK_DEV_DAC960 is not set ># CONFIG_BLK_DEV_UMEM is not set ># CONFIG_BLK_DEV_COW_COMMON is not set >CONFIG_BLK_DEV_LOOP=y >CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 ># CONFIG_BLK_DEV_CRYPTOLOOP is not set ># CONFIG_BLK_DEV_DRBD is not set ># CONFIG_BLK_DEV_NBD is not set ># CONFIG_BLK_DEV_SKD is not set ># CONFIG_BLK_DEV_SX8 is not set >CONFIG_BLK_DEV_RAM=y >CONFIG_BLK_DEV_RAM_COUNT=16 >CONFIG_BLK_DEV_RAM_SIZE=8192 ># CONFIG_CDROM_PKTCDVD is not set ># CONFIG_ATA_OVER_ETH is not set ># CONFIG_BLK_DEV_RBD is not set ># CONFIG_BLK_DEV_RSXX is not set > ># ># NVME Support ># ># CONFIG_BLK_DEV_NVME is not set ># CONFIG_NVME_FC is not set ># CONFIG_NVME_TARGET is not set > ># ># Misc devices ># ># CONFIG_SENSORS_LIS3LV02D is not set ># CONFIG_AD525X_DPOT is not set ># CONFIG_DUMMY_IRQ is not set ># CONFIG_IBM_ASM is not set ># CONFIG_PHANTOM is not set ># CONFIG_SGI_IOC4 is not set ># CONFIG_TIFM_CORE is not set ># CONFIG_ICS932S401 is not set ># CONFIG_ENCLOSURE_SERVICES is not set ># CONFIG_HP_ILO is not set ># CONFIG_APDS9802ALS is not set ># CONFIG_ISL29003 is not set ># CONFIG_ISL29020 is not set ># CONFIG_SENSORS_TSL2550 is not set ># CONFIG_SENSORS_BH1770 is not set ># CONFIG_SENSORS_APDS990X is not set ># CONFIG_HMC6352 is not set ># CONFIG_DS1682 is not set ># CONFIG_USB_SWITCH_FSA9480 is not set ># CONFIG_SRAM is not set ># CONFIG_PCI_ENDPOINT_TEST is not set ># CONFIG_C2PORT is not set > ># ># EEPROM support ># ># CONFIG_EEPROM_AT24 is not set ># CONFIG_EEPROM_LEGACY is not set ># CONFIG_EEPROM_MAX6875 is not set >CONFIG_EEPROM_93CX6=y ># CONFIG_EEPROM_IDT_89HPESX is not set ># CONFIG_CB710_CORE is not set > ># ># Texas Instruments shared transport line discipline ># ># CONFIG_SENSORS_LIS3_I2C is not set ># CONFIG_ALTERA_STAPL is not set ># CONFIG_INTEL_MEI is not set ># CONFIG_INTEL_MEI_ME is not set ># CONFIG_INTEL_MEI_TXE is not set ># CONFIG_VMWARE_VMCI is not set > ># ># Intel MIC & related support ># > ># ># Intel MIC Bus Driver ># ># CONFIG_INTEL_MIC_BUS is not set > ># ># SCIF Bus Driver ># ># CONFIG_SCIF_BUS is not set > ># ># VOP Bus Driver ># ># CONFIG_VOP_BUS is not set > ># ># Intel MIC Host Driver ># > ># ># Intel MIC Card Driver ># > ># ># SCIF Driver ># > ># ># Intel MIC Coprocessor State Management (COSM) Drivers ># > ># ># VOP Driver ># ># CONFIG_GENWQE is not set ># CONFIG_ECHO is not set ># CONFIG_CXL_BASE is not set ># CONFIG_CXL_AFU_DRIVER_OPS is not set ># CONFIG_CXL_LIB is not set >CONFIG_HAVE_IDE=y ># CONFIG_IDE is not set > ># ># SCSI device support ># >CONFIG_SCSI_MOD=y ># CONFIG_RAID_ATTRS is not set >CONFIG_SCSI=y >CONFIG_SCSI_DMA=y ># CONFIG_SCSI_NETLINK is not set ># CONFIG_SCSI_MQ_DEFAULT is not set >CONFIG_SCSI_PROC_FS=y > ># ># SCSI support type (disk, tape, CD-ROM) ># >CONFIG_BLK_DEV_SD=y ># CONFIG_CHR_DEV_ST is not set ># CONFIG_CHR_DEV_OSST is not set >CONFIG_BLK_DEV_SR=y ># CONFIG_BLK_DEV_SR_VENDOR is not set >CONFIG_CHR_DEV_SG=y ># CONFIG_CHR_DEV_SCH is not set ># CONFIG_SCSI_CONSTANTS is not set ># CONFIG_SCSI_LOGGING is not set ># CONFIG_SCSI_SCAN_ASYNC is not set > ># ># SCSI Transports ># ># CONFIG_SCSI_SPI_ATTRS is not set ># CONFIG_SCSI_FC_ATTRS is not set ># CONFIG_SCSI_ISCSI_ATTRS is not set ># CONFIG_SCSI_SAS_ATTRS is not set ># CONFIG_SCSI_SAS_LIBSAS is not set ># CONFIG_SCSI_SRP_ATTRS is not set >CONFIG_SCSI_LOWLEVEL=y ># CONFIG_ISCSI_TCP is not set ># CONFIG_ISCSI_BOOT_SYSFS is not set ># CONFIG_SCSI_CXGB3_ISCSI is not set ># CONFIG_SCSI_CXGB4_ISCSI is not set ># CONFIG_SCSI_BNX2_ISCSI is not set ># CONFIG_BE2ISCSI is not set ># CONFIG_BLK_DEV_3W_XXXX_RAID is not set ># CONFIG_SCSI_HPSA is not set ># CONFIG_SCSI_3W_9XXX is not set ># CONFIG_SCSI_3W_SAS is not set ># CONFIG_SCSI_ACARD is not set ># CONFIG_SCSI_AACRAID is not set ># CONFIG_SCSI_AIC7XXX is not set ># CONFIG_SCSI_AIC79XX is not set ># CONFIG_SCSI_AIC94XX is not set ># CONFIG_SCSI_MVSAS is not set ># CONFIG_SCSI_MVUMI is not set ># CONFIG_SCSI_DPT_I2O is not set ># CONFIG_SCSI_ADVANSYS is not set ># CONFIG_SCSI_ARCMSR is not set ># CONFIG_SCSI_ESAS2R is not set ># CONFIG_MEGARAID_NEWGEN is not set ># CONFIG_MEGARAID_LEGACY is not set ># CONFIG_MEGARAID_SAS is not set ># CONFIG_SCSI_MPT3SAS is not set ># CONFIG_SCSI_MPT2SAS is not set ># CONFIG_SCSI_SMARTPQI is not set ># CONFIG_SCSI_UFSHCD is not set ># CONFIG_SCSI_HPTIOP is not set ># CONFIG_SCSI_BUSLOGIC is not set ># CONFIG_VMWARE_PVSCSI is not set ># CONFIG_SCSI_SNIC is not set ># CONFIG_SCSI_DMX3191D is not set ># CONFIG_SCSI_EATA is not set ># CONFIG_SCSI_FUTURE_DOMAIN is not set ># CONFIG_SCSI_GDTH is not set ># CONFIG_SCSI_ISCI is not set ># CONFIG_SCSI_IPS is not set ># CONFIG_SCSI_INITIO is not set ># CONFIG_SCSI_INIA100 is not set ># CONFIG_SCSI_STEX is not set ># CONFIG_SCSI_SYM53C8XX_2 is not set ># CONFIG_SCSI_IPR is not set ># CONFIG_SCSI_QLOGIC_1280 is not set ># CONFIG_SCSI_QLA_ISCSI is not set ># CONFIG_SCSI_DC395x is not set ># CONFIG_SCSI_AM53C974 is not set ># CONFIG_SCSI_WD719X is not set ># CONFIG_SCSI_DEBUG is not set ># CONFIG_SCSI_PMCRAID is not set ># CONFIG_SCSI_PM8001 is not set ># CONFIG_SCSI_DH is not set ># CONFIG_SCSI_OSD_INITIATOR is not set >CONFIG_ATA=y ># CONFIG_ATA_NONSTANDARD is not set >CONFIG_ATA_VERBOSE_ERROR=y >CONFIG_SATA_PMP=y > ># ># Controllers with non-SFF native interface ># >CONFIG_SATA_AHCI=y >CONFIG_SATA_AHCI_PLATFORM=y ># CONFIG_SATA_INIC162X is not set ># CONFIG_SATA_ACARD_AHCI is not set ># CONFIG_SATA_SIL24 is not set >CONFIG_ATA_SFF=y > ># ># SFF controllers with custom DMA interface ># ># CONFIG_PDC_ADMA is not set ># CONFIG_SATA_QSTOR is not set ># CONFIG_SATA_SX4 is not set >CONFIG_ATA_BMDMA=y > ># ># SATA SFF controllers with BMDMA ># >CONFIG_ATA_PIIX=y ># CONFIG_SATA_MV is not set ># CONFIG_SATA_NV is not set ># CONFIG_SATA_PROMISE is not set ># CONFIG_SATA_SIL is not set ># CONFIG_SATA_SIS is not set ># CONFIG_SATA_SVW is not set ># CONFIG_SATA_ULI is not set ># CONFIG_SATA_VIA is not set ># CONFIG_SATA_VITESSE is not set > ># ># PATA SFF controllers with BMDMA ># ># CONFIG_PATA_ALI is not set ># CONFIG_PATA_AMD is not set ># CONFIG_PATA_ARTOP is not set ># CONFIG_PATA_ATIIXP is not set ># CONFIG_PATA_ATP867X is not set ># CONFIG_PATA_CMD64X is not set ># CONFIG_PATA_CYPRESS is not set ># CONFIG_PATA_EFAR is not set ># CONFIG_PATA_HPT366 is not set ># CONFIG_PATA_HPT37X is not set ># CONFIG_PATA_HPT3X2N is not set ># CONFIG_PATA_HPT3X3 is not set ># CONFIG_PATA_IT8213 is not set ># CONFIG_PATA_IT821X is not set ># CONFIG_PATA_JMICRON is not set ># CONFIG_PATA_MARVELL is not set ># CONFIG_PATA_NETCELL is not set ># CONFIG_PATA_NINJA32 is not set ># CONFIG_PATA_NS87415 is not set ># CONFIG_PATA_OLDPIIX is not set ># CONFIG_PATA_OPTIDMA is not set ># CONFIG_PATA_PDC2027X is not set ># CONFIG_PATA_PDC_OLD is not set ># CONFIG_PATA_RADISYS is not set ># CONFIG_PATA_RDC is not set ># CONFIG_PATA_SCH is not set ># CONFIG_PATA_SERVERWORKS is not set ># CONFIG_PATA_SIL680 is not set ># CONFIG_PATA_SIS is not set ># CONFIG_PATA_TOSHIBA is not set ># CONFIG_PATA_TRIFLEX is not set ># CONFIG_PATA_VIA is not set ># CONFIG_PATA_WINBOND is not set > ># ># PIO-only SFF controllers ># ># CONFIG_PATA_CMD640_PCI is not set ># CONFIG_PATA_MPIIX is not set ># CONFIG_PATA_NS87410 is not set ># CONFIG_PATA_OPTI is not set ># CONFIG_PATA_PLATFORM is not set ># CONFIG_PATA_RZ1000 is not set > ># ># Generic fallback / legacy drivers ># ># CONFIG_ATA_GENERIC is not set ># CONFIG_PATA_LEGACY is not set ># CONFIG_MD is not set ># CONFIG_TARGET_CORE is not set ># CONFIG_FUSION is not set > ># ># IEEE 1394 (FireWire) support ># ># CONFIG_FIREWIRE is not set ># CONFIG_FIREWIRE_NOSY is not set ># CONFIG_MACINTOSH_DRIVERS is not set >CONFIG_NETDEVICES=y >CONFIG_NET_CORE=y ># CONFIG_BONDING is not set ># CONFIG_DUMMY is not set ># CONFIG_EQUALIZER is not set ># CONFIG_NET_FC is not set ># CONFIG_NET_TEAM is not set ># CONFIG_MACVLAN is not set ># CONFIG_VXLAN is not set ># CONFIG_MACSEC is not set ># CONFIG_NETCONSOLE is not set ># CONFIG_NETPOLL is not set ># CONFIG_NET_POLL_CONTROLLER is not set ># CONFIG_TUN is not set ># CONFIG_TUN_VNET_CROSS_LE is not set ># CONFIG_VETH is not set ># CONFIG_NLMON is not set ># CONFIG_ARCNET is not set > ># ># CAIF transport drivers ># > ># ># Distributed Switch Architecture drivers ># >CONFIG_B53=m >CONFIG_B53_MDIO_DRIVER=m >CONFIG_B53_MMAP_DRIVER=m >CONFIG_B53_SRAB_DRIVER=m >CONFIG_NET_DSA_LOOP=m >CONFIG_NET_DSA_MT7530=m >CONFIG_NET_DSA_MV88E6060=m >CONFIG_MICROCHIP_KSZ=m >CONFIG_NET_DSA_MV88E6XXX=m >CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y >CONFIG_NET_DSA_QCA8K=m >CONFIG_NET_DSA_SMSC_LAN9303=m >CONFIG_NET_DSA_SMSC_LAN9303_I2C=m >CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m >CONFIG_ETHERNET=y >CONFIG_NET_VENDOR_3COM=y ># CONFIG_VORTEX is not set ># CONFIG_TYPHOON is not set ># CONFIG_NET_VENDOR_ADAPTEC is not set >CONFIG_NET_VENDOR_AGERE=y ># CONFIG_ET131X is not set >CONFIG_NET_VENDOR_ALACRITECH=y ># CONFIG_SLICOSS is not set ># CONFIG_NET_VENDOR_ALTEON is not set ># CONFIG_ALTERA_TSE is not set >CONFIG_NET_VENDOR_AMAZON=y ># CONFIG_ENA_ETHERNET is not set ># CONFIG_NET_VENDOR_AMD is not set >CONFIG_NET_VENDOR_AQUANTIA=y ># CONFIG_AQTION is not set ># CONFIG_NET_VENDOR_ARC is not set ># CONFIG_NET_VENDOR_ATHEROS is not set ># CONFIG_NET_VENDOR_AURORA is not set ># CONFIG_NET_CADENCE is not set ># CONFIG_NET_VENDOR_BROADCOM is not set ># CONFIG_NET_VENDOR_BROCADE is not set ># CONFIG_NET_VENDOR_CAVIUM is not set ># CONFIG_NET_VENDOR_CHELSIO is not set ># CONFIG_NET_VENDOR_CISCO is not set ># CONFIG_CX_ECAT is not set ># CONFIG_DNET is not set ># CONFIG_NET_VENDOR_DEC is not set ># CONFIG_NET_VENDOR_DLINK is not set ># CONFIG_NET_VENDOR_EMULEX is not set >CONFIG_NET_VENDOR_EZCHIP=y ># CONFIG_NET_VENDOR_EXAR is not set ># CONFIG_NET_VENDOR_HP is not set >CONFIG_NET_VENDOR_HUAWEI=y ># CONFIG_HINIC is not set >CONFIG_NET_VENDOR_INTEL=y ># CONFIG_E100 is not set >CONFIG_E1000=y >CONFIG_E1000E=y >CONFIG_E1000E_HWTS=y ># CONFIG_IGB is not set ># CONFIG_IGBVF is not set ># CONFIG_IXGB is not set ># CONFIG_IXGBE is not set ># CONFIG_IXGBEVF is not set ># CONFIG_I40E is not set ># CONFIG_I40EVF is not set ># CONFIG_FM10K is not set >CONFIG_NET_VENDOR_I825XX=y ># CONFIG_JME is not set >CONFIG_NET_VENDOR_MARVELL=y ># CONFIG_MVMDIO is not set ># CONFIG_SKGE is not set ># CONFIG_SKY2 is not set ># CONFIG_NET_VENDOR_MELLANOX is not set ># CONFIG_NET_VENDOR_MICREL is not set ># CONFIG_NET_VENDOR_MYRI is not set ># CONFIG_FEALNX is not set ># CONFIG_NET_VENDOR_NATSEMI is not set >CONFIG_NET_VENDOR_NETRONOME=y ># CONFIG_NFP is not set ># CONFIG_NET_VENDOR_NVIDIA is not set ># CONFIG_NET_VENDOR_OKI is not set ># CONFIG_ETHOC is not set ># CONFIG_NET_PACKET_ENGINE is not set ># CONFIG_NET_VENDOR_QLOGIC is not set >CONFIG_NET_VENDOR_QUALCOMM=y ># CONFIG_QCOM_EMAC is not set ># CONFIG_RMNET is not set ># CONFIG_NET_VENDOR_REALTEK is not set >CONFIG_NET_VENDOR_RENESAS=y ># CONFIG_NET_VENDOR_RDC is not set >CONFIG_NET_VENDOR_ROCKER=y >CONFIG_ROCKER=y >CONFIG_NET_VENDOR_SAMSUNG=y ># CONFIG_SXGBE_ETH is not set ># CONFIG_NET_VENDOR_SEEQ is not set ># CONFIG_NET_VENDOR_SILAN is not set ># CONFIG_NET_VENDOR_SIS is not set >CONFIG_NET_VENDOR_SOLARFLARE=y ># CONFIG_SFC is not set ># CONFIG_SFC_FALCON is not set ># CONFIG_NET_VENDOR_SMSC is not set ># CONFIG_NET_VENDOR_STMICRO is not set ># CONFIG_NET_VENDOR_SUN is not set ># CONFIG_NET_VENDOR_TEHUTI is not set ># CONFIG_NET_VENDOR_TI is not set ># CONFIG_NET_VENDOR_VIA is not set ># CONFIG_NET_VENDOR_WIZNET is not set >CONFIG_NET_VENDOR_SYNOPSYS=y ># CONFIG_DWC_XLGMAC is not set ># CONFIG_FDDI is not set ># CONFIG_HIPPI is not set >CONFIG_MDIO_DEVICE=y >CONFIG_MDIO_BUS=y ># CONFIG_MDIO_BITBANG is not set ># CONFIG_MDIO_THUNDER is not set >CONFIG_PHYLINK=y >CONFIG_PHYLIB=y >CONFIG_SWPHY=y > ># ># MII PHY device drivers ># ># CONFIG_SFP is not set ># CONFIG_AMD_PHY is not set ># CONFIG_AQUANTIA_PHY is not set ># CONFIG_AT803X_PHY is not set >CONFIG_BCM7XXX_PHY=m ># CONFIG_BCM87XX_PHY is not set >CONFIG_BCM_NET_PHYLIB=m ># CONFIG_BROADCOM_PHY is not set ># CONFIG_CICADA_PHY is not set ># CONFIG_CORTINA_PHY is not set ># CONFIG_DAVICOM_PHY is not set ># CONFIG_DP83822_PHY is not set ># CONFIG_DP83848_PHY is not set ># CONFIG_DP83867_PHY is not set >CONFIG_FIXED_PHY=m ># CONFIG_ICPLUS_PHY is not set ># CONFIG_INTEL_XWAY_PHY is not set ># CONFIG_LSI_ET1011C_PHY is not set ># CONFIG_LXT_PHY is not set ># CONFIG_MARVELL_PHY is not set ># CONFIG_MARVELL_10G_PHY is not set ># CONFIG_MICREL_PHY is not set ># CONFIG_MICROCHIP_PHY is not set ># CONFIG_MICROSEMI_PHY is not set ># CONFIG_NATIONAL_PHY is not set ># CONFIG_QSEMI_PHY is not set ># CONFIG_REALTEK_PHY is not set ># CONFIG_RENESAS_PHY is not set ># CONFIG_ROCKCHIP_PHY is not set ># CONFIG_SMSC_PHY is not set ># CONFIG_STE10XP is not set ># CONFIG_TERANETICS_PHY is not set ># CONFIG_VITESSE_PHY is not set ># CONFIG_XILINX_GMII2RGMII is not set ># CONFIG_PPP is not set ># CONFIG_SLIP is not set > ># ># Host-side USB support is needed for USB Network Adapter support ># ># CONFIG_WLAN is not set > ># ># Enable WiMAX (Networking options) to see the WiMAX drivers ># ># CONFIG_WAN is not set ># CONFIG_VMXNET3 is not set ># CONFIG_NETDEVSIM is not set ># CONFIG_ISDN is not set ># CONFIG_NVM is not set > ># ># Input device support ># >CONFIG_INPUT=y ># CONFIG_INPUT_FF_MEMLESS is not set ># CONFIG_INPUT_POLLDEV is not set ># CONFIG_INPUT_SPARSEKMAP is not set ># CONFIG_INPUT_MATRIXKMAP is not set > ># ># Userland interfaces ># ># CONFIG_INPUT_MOUSEDEV is not set ># CONFIG_INPUT_JOYDEV is not set ># CONFIG_INPUT_EVDEV is not set ># CONFIG_INPUT_EVBUG is not set > ># ># Input Device Drivers ># ># CONFIG_INPUT_KEYBOARD is not set ># CONFIG_INPUT_MOUSE is not set ># CONFIG_INPUT_JOYSTICK is not set ># CONFIG_INPUT_TABLET is not set ># CONFIG_INPUT_TOUCHSCREEN is not set ># CONFIG_INPUT_MISC is not set ># CONFIG_RMI4_CORE is not set > ># ># Hardware I/O ports ># ># CONFIG_SERIO is not set >CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y ># CONFIG_GAMEPORT is not set > ># ># Character devices ># >CONFIG_TTY=y >CONFIG_VT=y >CONFIG_CONSOLE_TRANSLATIONS=y >CONFIG_VT_CONSOLE=y >CONFIG_HW_CONSOLE=y >CONFIG_VT_HW_CONSOLE_BINDING=y >CONFIG_UNIX98_PTYS=y >CONFIG_LEGACY_PTYS=y >CONFIG_LEGACY_PTY_COUNT=256 ># CONFIG_SERIAL_NONSTANDARD is not set ># CONFIG_NOZOMI is not set ># CONFIG_N_GSM is not set ># CONFIG_TRACE_SINK is not set >CONFIG_DEVMEM=y >CONFIG_DEVKMEM=y > ># ># Serial drivers ># >CONFIG_SERIAL_EARLYCON=y >CONFIG_SERIAL_8250=y >CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y ># CONFIG_SERIAL_8250_FINTEK is not set >CONFIG_SERIAL_8250_CONSOLE=y >CONFIG_SERIAL_8250_PCI=y >CONFIG_SERIAL_8250_EXAR=y >CONFIG_SERIAL_8250_NR_UARTS=4 >CONFIG_SERIAL_8250_RUNTIME_UARTS=4 ># CONFIG_SERIAL_8250_EXTENDED is not set ># CONFIG_SERIAL_8250_FSL is not set >CONFIG_SERIAL_8250_DW=y ># CONFIG_SERIAL_8250_RT288X is not set >CONFIG_SERIAL_8250_LPSS=y >CONFIG_SERIAL_8250_MID=y ># CONFIG_SERIAL_8250_MOXA is not set > ># ># Non-8250 serial port support ># ># CONFIG_SERIAL_UARTLITE is not set >CONFIG_SERIAL_CORE=y >CONFIG_SERIAL_CORE_CONSOLE=y ># CONFIG_SERIAL_JSM is not set ># CONFIG_SERIAL_SCCNXP is not set ># CONFIG_SERIAL_SC16IS7XX is not set ># CONFIG_SERIAL_ALTERA_JTAGUART is not set ># CONFIG_SERIAL_ALTERA_UART is not set ># CONFIG_SERIAL_ARC is not set ># CONFIG_SERIAL_RP2 is not set ># CONFIG_SERIAL_FSL_LPUART is not set ># CONFIG_SERIAL_DEV_BUS is not set ># CONFIG_TTY_PRINTK is not set ># CONFIG_IPMI_HANDLER is not set >CONFIG_HW_RANDOM=y ># CONFIG_HW_RANDOM_TIMERIOMEM is not set >CONFIG_HW_RANDOM_INTEL=y >CONFIG_HW_RANDOM_AMD=y >CONFIG_HW_RANDOM_VIA=y ># CONFIG_NVRAM is not set ># CONFIG_R3964 is not set ># CONFIG_APPLICOM is not set ># CONFIG_MWAVE is not set ># CONFIG_RAW_DRIVER is not set ># CONFIG_HANGCHECK_TIMER is not set ># CONFIG_TCG_TPM is not set ># CONFIG_TELCLOCK is not set >CONFIG_DEVPORT=y ># CONFIG_XILLYBUS is not set > ># ># I2C support ># >CONFIG_I2C=y >CONFIG_I2C_BOARDINFO=y >CONFIG_I2C_COMPAT=y >CONFIG_I2C_CHARDEV=y >CONFIG_I2C_MUX=y > ># ># Multiplexer I2C Chip support ># ># CONFIG_I2C_MUX_LTC4306 is not set ># CONFIG_I2C_MUX_PCA9541 is not set ># CONFIG_I2C_MUX_REG is not set ># CONFIG_I2C_MUX_MLXCPLD is not set >CONFIG_I2C_HELPER_AUTO=y > ># ># I2C Hardware Bus support ># > ># ># PC SMBus host controller drivers ># ># CONFIG_I2C_ALI1535 is not set ># CONFIG_I2C_ALI1563 is not set ># CONFIG_I2C_ALI15X3 is not set ># CONFIG_I2C_AMD756 is not set ># CONFIG_I2C_AMD8111 is not set ># CONFIG_I2C_I801 is not set ># CONFIG_I2C_ISCH is not set ># CONFIG_I2C_ISMT is not set ># CONFIG_I2C_PIIX4 is not set ># CONFIG_I2C_NFORCE2 is not set ># CONFIG_I2C_SIS5595 is not set ># CONFIG_I2C_SIS630 is not set ># CONFIG_I2C_SIS96X is not set ># CONFIG_I2C_VIA is not set ># CONFIG_I2C_VIAPRO is not set > ># ># I2C system bus drivers (mostly embedded / system-on-chip) ># ># CONFIG_I2C_DESIGNWARE_PLATFORM is not set ># CONFIG_I2C_DESIGNWARE_PCI is not set ># CONFIG_I2C_EMEV2 is not set ># CONFIG_I2C_OCORES is not set ># CONFIG_I2C_PCA_PLATFORM is not set ># CONFIG_I2C_PXA_PCI is not set ># CONFIG_I2C_SIMTEC is not set ># CONFIG_I2C_XILINX is not set > ># ># External I2C/SMBus adapter drivers ># ># CONFIG_I2C_PARPORT_LIGHT is not set ># CONFIG_I2C_TAOS_EVM is not set > ># ># Other I2C/SMBus bus drivers ># ># CONFIG_I2C_MLXCPLD is not set ># CONFIG_I2C_STUB is not set ># CONFIG_I2C_SLAVE is not set ># CONFIG_I2C_DEBUG_CORE is not set ># CONFIG_I2C_DEBUG_ALGO is not set ># CONFIG_I2C_DEBUG_BUS is not set ># CONFIG_SPI is not set ># CONFIG_SPMI is not set ># CONFIG_HSI is not set >CONFIG_PPS=y ># CONFIG_PPS_DEBUG is not set > ># ># PPS clients support ># ># CONFIG_PPS_CLIENT_KTIMER is not set ># CONFIG_PPS_CLIENT_LDISC is not set ># CONFIG_PPS_CLIENT_GPIO is not set > ># ># PPS generators support ># > ># ># PTP clock support ># >CONFIG_PTP_1588_CLOCK=y > ># ># Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. ># ># CONFIG_PINCTRL is not set ># CONFIG_GPIOLIB is not set ># CONFIG_W1 is not set ># CONFIG_POWER_AVS is not set ># CONFIG_POWER_RESET is not set >CONFIG_POWER_SUPPLY=y ># CONFIG_POWER_SUPPLY_DEBUG is not set ># CONFIG_PDA_POWER is not set ># CONFIG_TEST_POWER is not set ># CONFIG_BATTERY_DS2780 is not set ># CONFIG_BATTERY_DS2781 is not set ># CONFIG_BATTERY_DS2782 is not set ># CONFIG_BATTERY_SBS is not set ># CONFIG_CHARGER_SBS is not set ># CONFIG_BATTERY_BQ27XXX is not set ># CONFIG_BATTERY_MAX17040 is not set ># CONFIG_BATTERY_MAX17042 is not set ># CONFIG_CHARGER_MAX8903 is not set ># CONFIG_CHARGER_LP8727 is not set ># CONFIG_CHARGER_BQ2415X is not set ># CONFIG_CHARGER_SMB347 is not set ># CONFIG_BATTERY_GAUGE_LTC2941 is not set ># CONFIG_HWMON is not set >CONFIG_THERMAL=y >CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 >CONFIG_THERMAL_WRITABLE_TRIPS=y ># CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set ># CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set >CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=y ># CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set ># CONFIG_THERMAL_GOV_FAIR_SHARE is not set >CONFIG_THERMAL_GOV_STEP_WISE=y ># CONFIG_THERMAL_GOV_BANG_BANG is not set >CONFIG_THERMAL_GOV_USER_SPACE=y ># CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set ># CONFIG_THERMAL_EMULATION is not set ># CONFIG_INTEL_POWERCLAMP is not set >CONFIG_X86_PKG_TEMP_THERMAL=m ># CONFIG_INTEL_SOC_DTS_THERMAL is not set > ># ># ACPI INT340X thermal drivers ># ># CONFIG_INTEL_PCH_THERMAL is not set ># CONFIG_WATCHDOG is not set >CONFIG_SSB_POSSIBLE=y > ># ># Sonics Silicon Backplane ># >CONFIG_SSB=m >CONFIG_SSB_SPROM=y >CONFIG_SSB_PCIHOST_POSSIBLE=y >CONFIG_SSB_PCIHOST=y ># CONFIG_SSB_B43_PCI_BRIDGE is not set ># CONFIG_SSB_SILENT is not set ># CONFIG_SSB_DEBUG is not set >CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y >CONFIG_SSB_DRIVER_PCICORE=y >CONFIG_BCMA_POSSIBLE=y ># CONFIG_BCMA is not set > ># ># Multifunction device drivers ># ># CONFIG_MFD_CORE is not set ># CONFIG_MFD_AS3711 is not set ># CONFIG_PMIC_ADP5520 is not set ># CONFIG_MFD_BCM590XX is not set ># CONFIG_MFD_BD9571MWV is not set ># CONFIG_MFD_AXP20X_I2C is not set ># CONFIG_MFD_CROS_EC is not set ># CONFIG_PMIC_DA903X is not set ># CONFIG_MFD_DA9052_I2C is not set ># CONFIG_MFD_DA9055 is not set ># CONFIG_MFD_DA9062 is not set ># CONFIG_MFD_DA9063 is not set ># CONFIG_MFD_DA9150 is not set ># CONFIG_MFD_MC13XXX_I2C is not set ># CONFIG_HTC_PASIC3 is not set ># CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set ># CONFIG_LPC_ICH is not set ># CONFIG_LPC_SCH is not set ># CONFIG_MFD_INTEL_LPSS_PCI is not set ># CONFIG_MFD_JANZ_CMODIO is not set ># CONFIG_MFD_KEMPLD is not set ># CONFIG_MFD_88PM800 is not set ># CONFIG_MFD_88PM805 is not set ># CONFIG_MFD_88PM860X is not set ># CONFIG_MFD_MAX14577 is not set ># CONFIG_MFD_MAX77693 is not set ># CONFIG_MFD_MAX77843 is not set ># CONFIG_MFD_MAX8907 is not set ># CONFIG_MFD_MAX8925 is not set ># CONFIG_MFD_MAX8997 is not set ># CONFIG_MFD_MAX8998 is not set ># CONFIG_MFD_MT6397 is not set ># CONFIG_MFD_MENF21BMC is not set ># CONFIG_MFD_RETU is not set ># CONFIG_MFD_PCF50633 is not set ># CONFIG_MFD_RDC321X is not set ># CONFIG_MFD_RTSX_PCI is not set ># CONFIG_MFD_RT5033 is not set ># CONFIG_MFD_RC5T583 is not set ># CONFIG_MFD_SEC_CORE is not set ># CONFIG_MFD_SI476X_CORE is not set ># CONFIG_MFD_SM501 is not set ># CONFIG_MFD_SKY81452 is not set ># CONFIG_MFD_SMSC is not set ># CONFIG_ABX500_CORE is not set ># CONFIG_MFD_SYSCON is not set ># CONFIG_MFD_TI_AM335X_TSCADC is not set ># CONFIG_MFD_LP3943 is not set ># CONFIG_MFD_LP8788 is not set ># CONFIG_MFD_TI_LMU is not set ># CONFIG_MFD_PALMAS is not set ># CONFIG_TPS6105X is not set ># CONFIG_TPS6507X is not set ># CONFIG_MFD_TPS65086 is not set ># CONFIG_MFD_TPS65090 is not set ># CONFIG_MFD_TI_LP873X is not set ># CONFIG_MFD_TPS6586X is not set ># CONFIG_MFD_TPS65912_I2C is not set ># CONFIG_MFD_TPS80031 is not set ># CONFIG_TWL4030_CORE is not set ># CONFIG_TWL6040_CORE is not set ># CONFIG_MFD_WL1273_CORE is not set ># CONFIG_MFD_LM3533 is not set ># CONFIG_MFD_TMIO is not set ># CONFIG_MFD_VX855 is not set ># CONFIG_MFD_ARIZONA_I2C is not set ># CONFIG_MFD_WM8400 is not set ># CONFIG_MFD_WM831X_I2C is not set ># CONFIG_MFD_WM8350_I2C is not set ># CONFIG_MFD_WM8994 is not set ># CONFIG_REGULATOR is not set ># CONFIG_RC_CORE is not set ># CONFIG_MEDIA_SUPPORT is not set > ># ># Graphics support ># ># CONFIG_AGP is not set ># CONFIG_VGA_ARB is not set ># CONFIG_DRM is not set > ># ># ACP (Audio CoProcessor) Configuration ># > ># ># AMD Library routines ># ># CONFIG_CHASH is not set ># CONFIG_DRM_LIB_RANDOM is not set > ># ># Frame buffer Devices ># ># CONFIG_FB is not set ># CONFIG_BACKLIGHT_LCD_SUPPORT is not set ># CONFIG_VGASTATE is not set > ># ># Console display driver support ># >CONFIG_VGA_CONSOLE=y ># CONFIG_VGACON_SOFT_SCROLLBACK is not set >CONFIG_DUMMY_CONSOLE=y >CONFIG_DUMMY_CONSOLE_COLUMNS=80 >CONFIG_DUMMY_CONSOLE_ROWS=25 ># CONFIG_SOUND is not set > ># ># HID support ># >CONFIG_HID=y ># CONFIG_HID_BATTERY_STRENGTH is not set ># CONFIG_HIDRAW is not set ># CONFIG_UHID is not set >CONFIG_HID_GENERIC=y > ># ># Special HID drivers ># ># CONFIG_HID_A4TECH is not set ># CONFIG_HID_ACRUX is not set ># CONFIG_HID_APPLE is not set ># CONFIG_HID_AUREAL is not set ># CONFIG_HID_BELKIN is not set ># CONFIG_HID_CHERRY is not set ># CONFIG_HID_CHICONY is not set ># CONFIG_HID_CMEDIA is not set ># CONFIG_HID_CYPRESS is not set ># CONFIG_HID_DRAGONRISE is not set ># CONFIG_HID_EMS_FF is not set ># CONFIG_HID_ELECOM is not set ># CONFIG_HID_EZKEY is not set ># CONFIG_HID_GEMBIRD is not set ># CONFIG_HID_GFRM is not set ># CONFIG_HID_KEYTOUCH is not set ># CONFIG_HID_KYE is not set ># CONFIG_HID_WALTOP is not set ># CONFIG_HID_GYRATION is not set ># CONFIG_HID_ICADE is not set ># CONFIG_HID_ITE is not set ># CONFIG_HID_TWINHAN is not set ># CONFIG_HID_KENSINGTON is not set ># CONFIG_HID_LCPOWER is not set ># CONFIG_HID_LENOVO is not set ># CONFIG_HID_LOGITECH is not set ># CONFIG_HID_MAGICMOUSE is not set ># CONFIG_HID_MAYFLASH is not set ># CONFIG_HID_MICROSOFT is not set ># CONFIG_HID_MONTEREY is not set ># CONFIG_HID_MULTITOUCH is not set ># CONFIG_HID_NTI is not set ># CONFIG_HID_ORTEK is not set ># CONFIG_HID_PANTHERLORD is not set ># CONFIG_HID_PETALYNX is not set ># CONFIG_HID_PICOLCD is not set ># CONFIG_HID_PLANTRONICS is not set ># CONFIG_HID_PRIMAX is not set ># CONFIG_HID_SAITEK is not set ># CONFIG_HID_SAMSUNG is not set ># CONFIG_HID_SPEEDLINK is not set ># CONFIG_HID_STEELSERIES is not set ># CONFIG_HID_SUNPLUS is not set ># CONFIG_HID_RMI is not set ># CONFIG_HID_GREENASIA is not set ># CONFIG_HID_SMARTJOYPLUS is not set ># CONFIG_HID_TIVO is not set ># CONFIG_HID_TOPSEED is not set ># CONFIG_HID_THRUSTMASTER is not set ># CONFIG_HID_UDRAW_PS3 is not set ># CONFIG_HID_XINMO is not set ># CONFIG_HID_ZEROPLUS is not set ># CONFIG_HID_ZYDACRON is not set ># CONFIG_HID_SENSOR_HUB is not set ># CONFIG_HID_ALPS is not set > ># ># I2C HID support ># ># CONFIG_I2C_HID is not set > ># ># Intel ISH HID support ># ># CONFIG_INTEL_ISH_HID is not set >CONFIG_USB_OHCI_LITTLE_ENDIAN=y ># CONFIG_USB_SUPPORT is not set ># CONFIG_UWB is not set ># CONFIG_MMC is not set ># CONFIG_MEMSTICK is not set ># CONFIG_NEW_LEDS is not set ># CONFIG_ACCESSIBILITY is not set ># CONFIG_INFINIBAND is not set >CONFIG_EDAC_ATOMIC_SCRUB=y >CONFIG_EDAC_SUPPORT=y >CONFIG_RTC_LIB=y >CONFIG_RTC_MC146818_LIB=y ># CONFIG_RTC_CLASS is not set ># CONFIG_DMADEVICES is not set > ># ># DMABUF options ># ># CONFIG_SYNC_FILE is not set ># CONFIG_AUXDISPLAY is not set ># CONFIG_UIO is not set ># CONFIG_VIRT_DRIVERS is not set > ># ># Virtio drivers ># ># CONFIG_VIRTIO_PCI is not set ># CONFIG_VIRTIO_MMIO is not set > ># ># Microsoft Hyper-V guest support ># ># CONFIG_HYPERV_TSCPAGE is not set ># CONFIG_STAGING is not set ># CONFIG_X86_PLATFORM_DEVICES is not set >CONFIG_PMC_ATOM=y ># CONFIG_CHROME_PLATFORMS is not set >CONFIG_CLKDEV_LOOKUP=y >CONFIG_HAVE_CLK_PREPARE=y >CONFIG_COMMON_CLK=y > ># ># Common Clock Framework ># ># CONFIG_COMMON_CLK_SI5351 is not set ># CONFIG_COMMON_CLK_CDCE706 is not set ># CONFIG_COMMON_CLK_CS2000_CP is not set ># CONFIG_COMMON_CLK_NXP is not set ># CONFIG_COMMON_CLK_PXA is not set ># CONFIG_COMMON_CLK_PIC32 is not set ># CONFIG_HWSPINLOCK is not set > ># ># Clock Source drivers ># >CONFIG_CLKEVT_I8253=y >CONFIG_I8253_LOCK=y >CONFIG_CLKBLD_I8253=y ># CONFIG_ATMEL_PIT is not set ># CONFIG_SH_TIMER_CMT is not set ># CONFIG_SH_TIMER_MTU2 is not set ># CONFIG_SH_TIMER_TMU is not set ># CONFIG_EM_TIMER_STI is not set ># CONFIG_MAILBOX is not set ># CONFIG_IOMMU_SUPPORT is not set > ># ># Remoteproc drivers ># ># CONFIG_REMOTEPROC is not set > ># ># Rpmsg drivers ># ># CONFIG_RPMSG_VIRTIO is not set > ># ># SOC (System On Chip) specific Drivers ># > ># ># Amlogic SoC drivers ># > ># ># Broadcom SoC drivers ># > ># ># i.MX SoC drivers ># > ># ># Qualcomm SoC drivers ># ># CONFIG_SUNXI_SRAM is not set ># CONFIG_SOC_TI is not set ># CONFIG_PM_DEVFREQ is not set ># CONFIG_EXTCON is not set ># CONFIG_MEMORY is not set ># CONFIG_IIO is not set ># CONFIG_NTB is not set ># CONFIG_VME_BUS is not set ># CONFIG_PWM is not set > ># ># IRQ chip support ># >CONFIG_ARM_GIC_MAX_NR=1 ># CONFIG_ARM_GIC_V3_ITS is not set ># CONFIG_IPACK_BUS is not set ># CONFIG_RESET_CONTROLLER is not set ># CONFIG_FMC is not set > ># ># PHY Subsystem ># >CONFIG_GENERIC_PHY=y ># CONFIG_BCM_KONA_USB2_PHY is not set ># CONFIG_PHY_PXA_28NM_HSIC is not set ># CONFIG_PHY_PXA_28NM_USB2 is not set ># CONFIG_POWERCAP is not set ># CONFIG_MCB is not set > ># ># Performance monitor support ># ># CONFIG_RAS is not set ># CONFIG_THUNDERBOLT is not set > ># ># Android ># ># CONFIG_ANDROID is not set ># CONFIG_LIBNVDIMM is not set ># CONFIG_DAX is not set ># CONFIG_NVMEM is not set ># CONFIG_STM is not set ># CONFIG_INTEL_TH is not set ># CONFIG_FPGA is not set > ># ># FSI support ># ># CONFIG_FSI is not set > ># ># Firmware Drivers ># ># CONFIG_EDD is not set ># CONFIG_FIRMWARE_MEMMAP is not set ># CONFIG_DELL_RBU is not set ># CONFIG_DCDBAS is not set ># CONFIG_DMIID is not set ># CONFIG_DMI_SYSFS is not set >CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y ># CONFIG_FW_CFG_SYSFS is not set ># CONFIG_GOOGLE_FIRMWARE is not set > ># ># Tegra firmware driver ># > ># ># File systems ># >CONFIG_DCACHE_WORD_ACCESS=y >CONFIG_FS_IOMAP=y ># CONFIG_EXT2_FS is not set ># CONFIG_EXT3_FS is not set >CONFIG_EXT4_FS=y >CONFIG_EXT4_USE_FOR_EXT2=y ># CONFIG_EXT4_FS_POSIX_ACL is not set ># CONFIG_EXT4_FS_SECURITY is not set ># CONFIG_EXT4_ENCRYPTION is not set ># CONFIG_EXT4_DEBUG is not set >CONFIG_JBD2=y ># CONFIG_JBD2_DEBUG is not set >CONFIG_FS_MBCACHE=y ># CONFIG_REISERFS_FS is not set ># CONFIG_JFS_FS is not set ># CONFIG_XFS_FS is not set ># CONFIG_GFS2_FS is not set ># CONFIG_OCFS2_FS is not set ># CONFIG_BTRFS_FS is not set ># CONFIG_NILFS2_FS is not set ># CONFIG_F2FS_FS is not set ># CONFIG_FS_DAX is not set ># CONFIG_FS_POSIX_ACL is not set >CONFIG_EXPORTFS=y ># CONFIG_EXPORTFS_BLOCK_OPS is not set >CONFIG_FILE_LOCKING=y >CONFIG_MANDATORY_FILE_LOCKING=y ># CONFIG_FS_ENCRYPTION is not set >CONFIG_FSNOTIFY=y >CONFIG_DNOTIFY=y >CONFIG_INOTIFY_USER=y ># CONFIG_FANOTIFY is not set ># CONFIG_QUOTA is not set ># CONFIG_QUOTACTL is not set ># CONFIG_AUTOFS4_FS is not set ># CONFIG_FUSE_FS is not set ># CONFIG_OVERLAY_FS is not set > ># ># Caches ># ># CONFIG_FSCACHE is not set > ># ># CD-ROM/DVD Filesystems ># ># CONFIG_ISO9660_FS is not set ># CONFIG_UDF_FS is not set > ># ># DOS/FAT/NT Filesystems ># ># CONFIG_MSDOS_FS is not set ># CONFIG_VFAT_FS is not set ># CONFIG_NTFS_FS is not set > ># ># Pseudo filesystems ># >CONFIG_PROC_FS=y ># CONFIG_PROC_KCORE is not set >CONFIG_PROC_SYSCTL=y >CONFIG_PROC_PAGE_MONITOR=y >CONFIG_PROC_CHILDREN=y >CONFIG_KERNFS=y >CONFIG_SYSFS=y >CONFIG_TMPFS=y ># CONFIG_TMPFS_POSIX_ACL is not set ># CONFIG_TMPFS_XATTR is not set ># CONFIG_HUGETLBFS is not set ># CONFIG_HUGETLB_PAGE is not set >CONFIG_ARCH_HAS_GIGANTIC_PAGE=y >CONFIG_CONFIGFS_FS=y >CONFIG_MISC_FILESYSTEMS=y ># CONFIG_ORANGEFS_FS is not set ># CONFIG_ADFS_FS is not set ># CONFIG_AFFS_FS is not set ># CONFIG_ECRYPT_FS is not set ># CONFIG_HFS_FS is not set ># CONFIG_HFSPLUS_FS is not set ># CONFIG_BEFS_FS is not set ># CONFIG_BFS_FS is not set ># CONFIG_EFS_FS is not set ># CONFIG_CRAMFS is not set ># CONFIG_SQUASHFS is not set ># CONFIG_VXFS_FS is not set ># CONFIG_MINIX_FS is not set ># CONFIG_OMFS_FS is not set ># CONFIG_HPFS_FS is not set ># CONFIG_QNX4FS_FS is not set ># CONFIG_QNX6FS_FS is not set ># CONFIG_ROMFS_FS is not set ># CONFIG_PSTORE is not set ># CONFIG_SYSV_FS is not set ># CONFIG_UFS_FS is not set ># CONFIG_NETWORK_FILESYSTEMS is not set >CONFIG_NLS=y >CONFIG_NLS_DEFAULT="iso8859-1" >CONFIG_NLS_CODEPAGE_437=y ># CONFIG_NLS_CODEPAGE_737 is not set ># CONFIG_NLS_CODEPAGE_775 is not set ># CONFIG_NLS_CODEPAGE_850 is not set ># CONFIG_NLS_CODEPAGE_852 is not set ># CONFIG_NLS_CODEPAGE_855 is not set ># CONFIG_NLS_CODEPAGE_857 is not set ># CONFIG_NLS_CODEPAGE_860 is not set ># CONFIG_NLS_CODEPAGE_861 is not set ># CONFIG_NLS_CODEPAGE_862 is not set ># CONFIG_NLS_CODEPAGE_863 is not set ># CONFIG_NLS_CODEPAGE_864 is not set ># CONFIG_NLS_CODEPAGE_865 is not set ># CONFIG_NLS_CODEPAGE_866 is not set ># CONFIG_NLS_CODEPAGE_869 is not set ># CONFIG_NLS_CODEPAGE_936 is not set ># CONFIG_NLS_CODEPAGE_950 is not set ># CONFIG_NLS_CODEPAGE_932 is not set ># CONFIG_NLS_CODEPAGE_949 is not set ># CONFIG_NLS_CODEPAGE_874 is not set ># CONFIG_NLS_ISO8859_8 is not set ># CONFIG_NLS_CODEPAGE_1250 is not set ># CONFIG_NLS_CODEPAGE_1251 is not set ># CONFIG_NLS_ASCII is not set >CONFIG_NLS_ISO8859_1=y ># CONFIG_NLS_ISO8859_2 is not set ># CONFIG_NLS_ISO8859_3 is not set ># CONFIG_NLS_ISO8859_4 is not set ># CONFIG_NLS_ISO8859_5 is not set ># CONFIG_NLS_ISO8859_6 is not set ># CONFIG_NLS_ISO8859_7 is not set ># CONFIG_NLS_ISO8859_9 is not set ># CONFIG_NLS_ISO8859_13 is not set ># CONFIG_NLS_ISO8859_14 is not set ># CONFIG_NLS_ISO8859_15 is not set ># CONFIG_NLS_KOI8_R is not set ># CONFIG_NLS_KOI8_U is not set ># CONFIG_NLS_MAC_ROMAN is not set ># CONFIG_NLS_MAC_CELTIC is not set ># CONFIG_NLS_MAC_CENTEURO is not set ># CONFIG_NLS_MAC_CROATIAN is not set ># CONFIG_NLS_MAC_CYRILLIC is not set ># CONFIG_NLS_MAC_GAELIC is not set ># CONFIG_NLS_MAC_GREEK is not set ># CONFIG_NLS_MAC_ICELAND is not set ># CONFIG_NLS_MAC_INUIT is not set ># CONFIG_NLS_MAC_ROMANIAN is not set ># CONFIG_NLS_MAC_TURKISH is not set ># CONFIG_NLS_UTF8 is not set ># CONFIG_DLM is not set > ># ># Kernel hacking ># >CONFIG_TRACE_IRQFLAGS_SUPPORT=y > ># ># printk and dmesg options ># >CONFIG_PRINTK_TIME=y >CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 >CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 ># CONFIG_BOOT_PRINTK_DELAY is not set >CONFIG_DYNAMIC_DEBUG=y > ># ># Compile-time checks and compiler options ># >CONFIG_DEBUG_INFO=y ># CONFIG_DEBUG_INFO_REDUCED is not set ># CONFIG_DEBUG_INFO_SPLIT is not set ># CONFIG_DEBUG_INFO_DWARF4 is not set >CONFIG_GDB_SCRIPTS=y >CONFIG_ENABLE_WARN_DEPRECATED=y >CONFIG_ENABLE_MUST_CHECK=y >CONFIG_FRAME_WARN=1024 ># CONFIG_STRIP_ASM_SYMS is not set ># CONFIG_READABLE_ASM is not set ># CONFIG_UNUSED_SYMBOLS is not set ># CONFIG_PAGE_OWNER is not set >CONFIG_DEBUG_FS=y ># CONFIG_HEADERS_CHECK is not set ># CONFIG_DEBUG_SECTION_MISMATCH is not set >CONFIG_SECTION_MISMATCH_WARN_ONLY=y >CONFIG_STACK_VALIDATION=y ># CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set >CONFIG_MAGIC_SYSRQ=y >CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 >CONFIG_MAGIC_SYSRQ_SERIAL=y >CONFIG_DEBUG_KERNEL=y > ># ># Memory Debugging ># ># CONFIG_PAGE_EXTENSION is not set ># CONFIG_DEBUG_PAGEALLOC is not set ># CONFIG_PAGE_POISONING is not set ># CONFIG_DEBUG_PAGE_REF is not set >CONFIG_DEBUG_RODATA_TEST=y ># CONFIG_DEBUG_OBJECTS is not set ># CONFIG_DEBUG_SLAB is not set >CONFIG_HAVE_DEBUG_KMEMLEAK=y ># CONFIG_DEBUG_KMEMLEAK is not set ># CONFIG_DEBUG_STACK_USAGE is not set ># CONFIG_DEBUG_VM is not set >CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y ># CONFIG_DEBUG_VIRTUAL is not set ># CONFIG_DEBUG_MEMORY_INIT is not set ># CONFIG_DEBUG_PER_CPU_MAPS is not set >CONFIG_HAVE_DEBUG_STACKOVERFLOW=y ># CONFIG_DEBUG_STACKOVERFLOW is not set >CONFIG_HAVE_ARCH_KASAN=y ># CONFIG_KASAN is not set >CONFIG_ARCH_HAS_KCOV=y ># CONFIG_KCOV is not set ># CONFIG_DEBUG_SHIRQ is not set > ># ># Debug Lockups and Hangs ># >CONFIG_LOCKUP_DETECTOR=y >CONFIG_SOFTLOCKUP_DETECTOR=y >CONFIG_HARDLOCKUP_DETECTOR_PERF=y >CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y >CONFIG_HARDLOCKUP_DETECTOR=y ># CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set >CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 ># CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set >CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 >CONFIG_DETECT_HUNG_TASK=y >CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 ># CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set >CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 >CONFIG_WQ_WATCHDOG=y ># CONFIG_PANIC_ON_OOPS is not set >CONFIG_PANIC_ON_OOPS_VALUE=0 >CONFIG_PANIC_TIMEOUT=0 >CONFIG_SCHED_DEBUG=y ># CONFIG_SCHED_INFO is not set ># CONFIG_SCHEDSTATS is not set ># CONFIG_SCHED_STACK_END_CHECK is not set ># CONFIG_DEBUG_TIMEKEEPING is not set > ># ># Lock Debugging (spinlocks, mutexes, etc...) ># >CONFIG_DEBUG_RT_MUTEXES=y >CONFIG_DEBUG_SPINLOCK=y >CONFIG_DEBUG_MUTEXES=y >CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y >CONFIG_DEBUG_LOCK_ALLOC=y >CONFIG_PROVE_LOCKING=y >CONFIG_LOCKDEP=y >CONFIG_LOCK_STAT=y >CONFIG_LOCKDEP_CROSSRELEASE=y >CONFIG_LOCKDEP_COMPLETIONS=y ># CONFIG_BOOTPARAM_LOCKDEP_CROSSRELEASE_FULLSTACK is not set >CONFIG_DEBUG_LOCKDEP=y >CONFIG_DEBUG_ATOMIC_SLEEP=y ># CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ># CONFIG_LOCK_TORTURE_TEST is not set ># CONFIG_WW_MUTEX_SELFTEST is not set >CONFIG_TRACE_IRQFLAGS=y >CONFIG_STACKTRACE=y ># CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set ># CONFIG_DEBUG_KOBJECT is not set >CONFIG_DEBUG_BUGVERBOSE=y ># CONFIG_DEBUG_LIST is not set ># CONFIG_DEBUG_PI_LIST is not set ># CONFIG_DEBUG_SG is not set ># CONFIG_DEBUG_NOTIFIERS is not set ># CONFIG_DEBUG_CREDENTIALS is not set > ># ># RCU Debugging ># >CONFIG_PROVE_RCU=y ># CONFIG_TORTURE_TEST is not set ># CONFIG_RCU_PERF_TEST is not set ># CONFIG_RCU_TORTURE_TEST is not set >CONFIG_RCU_CPU_STALL_TIMEOUT=21 ># CONFIG_RCU_TRACE is not set ># CONFIG_RCU_EQS_DEBUG is not set ># CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set ># CONFIG_DEBUG_BLOCK_EXT_DEVT is not set ># CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set ># CONFIG_NOTIFIER_ERROR_INJECTION is not set ># CONFIG_FAULT_INJECTION is not set ># CONFIG_LATENCYTOP is not set >CONFIG_USER_STACKTRACE_SUPPORT=y >CONFIG_NOP_TRACER=y >CONFIG_HAVE_FUNCTION_TRACER=y >CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y >CONFIG_HAVE_DYNAMIC_FTRACE=y >CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y >CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y >CONFIG_HAVE_SYSCALL_TRACEPOINTS=y >CONFIG_HAVE_FENTRY=y >CONFIG_HAVE_C_RECORDMCOUNT=y >CONFIG_TRACE_CLOCK=y >CONFIG_RING_BUFFER=y >CONFIG_EVENT_TRACING=y >CONFIG_CONTEXT_SWITCH_TRACER=y >CONFIG_TRACING=y >CONFIG_TRACING_SUPPORT=y >CONFIG_FTRACE=y ># CONFIG_FUNCTION_TRACER is not set ># CONFIG_IRQSOFF_TRACER is not set ># CONFIG_SCHED_TRACER is not set ># CONFIG_HWLAT_TRACER is not set ># CONFIG_ENABLE_DEFAULT_TRACERS is not set ># CONFIG_FTRACE_SYSCALLS is not set ># CONFIG_TRACER_SNAPSHOT is not set >CONFIG_BRANCH_PROFILE_NONE=y ># CONFIG_PROFILE_ANNOTATED_BRANCHES is not set ># CONFIG_PROFILE_ALL_BRANCHES is not set ># CONFIG_STACK_TRACER is not set ># CONFIG_BLK_DEV_IO_TRACE is not set >CONFIG_UPROBE_EVENTS=y >CONFIG_PROBE_EVENTS=y ># CONFIG_MMIOTRACE is not set ># CONFIG_HIST_TRIGGERS is not set ># CONFIG_TRACEPOINT_BENCHMARK is not set ># CONFIG_RING_BUFFER_BENCHMARK is not set ># CONFIG_RING_BUFFER_STARTUP_TEST is not set ># CONFIG_TRACE_EVAL_MAP_FILE is not set ># CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set ># CONFIG_DMA_API_DEBUG is not set > ># ># Runtime Testing ># ># CONFIG_LKDTM is not set ># CONFIG_TEST_LIST_SORT is not set ># CONFIG_TEST_SORT is not set ># CONFIG_BACKTRACE_SELF_TEST is not set ># CONFIG_RBTREE_TEST is not set ># CONFIG_INTERVAL_TREE_TEST is not set ># CONFIG_PERCPU_TEST is not set ># CONFIG_ATOMIC64_SELFTEST is not set ># CONFIG_TEST_HEXDUMP is not set ># CONFIG_TEST_STRING_HELPERS is not set ># CONFIG_TEST_KSTRTOX is not set ># CONFIG_TEST_PRINTF is not set ># CONFIG_TEST_BITMAP is not set ># CONFIG_TEST_UUID is not set ># CONFIG_TEST_RHASHTABLE is not set ># CONFIG_TEST_HASH is not set ># CONFIG_TEST_LKM is not set ># CONFIG_TEST_USER_COPY is not set ># CONFIG_TEST_BPF is not set ># CONFIG_TEST_FIND_BIT is not set ># CONFIG_TEST_FIRMWARE is not set ># CONFIG_TEST_SYSCTL is not set ># CONFIG_TEST_UDELAY is not set ># CONFIG_TEST_STATIC_KEYS is not set ># CONFIG_TEST_KMOD is not set ># CONFIG_MEMTEST is not set ># CONFIG_BUG_ON_DATA_CORRUPTION is not set ># CONFIG_SAMPLES is not set >CONFIG_HAVE_ARCH_KGDB=y ># CONFIG_KGDB is not set >CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y ># CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set ># CONFIG_UBSAN is not set >CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y ># CONFIG_STRICT_DEVMEM is not set >CONFIG_X86_VERBOSE_BOOTUP=y >CONFIG_EARLY_PRINTK=y ># CONFIG_EARLY_PRINTK_DBGP is not set ># CONFIG_EARLY_PRINTK_USB_XDBC is not set ># CONFIG_X86_PTDUMP_CORE is not set ># CONFIG_X86_PTDUMP is not set ># CONFIG_DEBUG_WX is not set >CONFIG_DOUBLEFAULT=y ># CONFIG_DEBUG_TLBFLUSH is not set ># CONFIG_IOMMU_STRESS is not set >CONFIG_HAVE_MMIOTRACE_SUPPORT=y >CONFIG_IO_DELAY_TYPE_0X80=0 >CONFIG_IO_DELAY_TYPE_0XED=1 >CONFIG_IO_DELAY_TYPE_UDELAY=2 >CONFIG_IO_DELAY_TYPE_NONE=3 >CONFIG_IO_DELAY_0X80=y ># CONFIG_IO_DELAY_0XED is not set ># CONFIG_IO_DELAY_UDELAY is not set ># CONFIG_IO_DELAY_NONE is not set >CONFIG_DEFAULT_IO_DELAY_TYPE=0 ># CONFIG_DEBUG_BOOT_PARAMS is not set ># CONFIG_CPA_DEBUG is not set ># CONFIG_OPTIMIZE_INLINING is not set ># CONFIG_DEBUG_ENTRY is not set ># CONFIG_DEBUG_NMI_SELFTEST is not set >CONFIG_X86_DEBUG_FPU=y ># CONFIG_PUNIT_ATOM_DEBUG is not set >CONFIG_UNWINDER_ORC=y ># CONFIG_UNWINDER_FRAME_POINTER is not set ># CONFIG_UNWINDER_GUESS is not set > ># ># Security options ># >CONFIG_KEYS=y >CONFIG_KEYS_COMPAT=y ># CONFIG_PERSISTENT_KEYRINGS is not set ># CONFIG_BIG_KEYS is not set ># CONFIG_ENCRYPTED_KEYS is not set ># CONFIG_KEY_DH_OPERATIONS is not set ># CONFIG_SECURITY_DMESG_RESTRICT is not set ># CONFIG_SECURITY is not set ># CONFIG_SECURITYFS is not set >CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y ># CONFIG_HARDENED_USERCOPY is not set ># CONFIG_FORTIFY_SOURCE is not set ># CONFIG_STATIC_USERMODEHELPER is not set >CONFIG_DEFAULT_SECURITY_DAC=y >CONFIG_DEFAULT_SECURITY="" >CONFIG_CRYPTO=y > ># ># Crypto core or helper ># >CONFIG_CRYPTO_ALGAPI=y >CONFIG_CRYPTO_ALGAPI2=y >CONFIG_CRYPTO_AEAD=m >CONFIG_CRYPTO_AEAD2=y >CONFIG_CRYPTO_BLKCIPHER2=y >CONFIG_CRYPTO_HASH=y >CONFIG_CRYPTO_HASH2=y >CONFIG_CRYPTO_RNG=m >CONFIG_CRYPTO_RNG2=y >CONFIG_CRYPTO_RNG_DEFAULT=m >CONFIG_CRYPTO_AKCIPHER2=y >CONFIG_CRYPTO_AKCIPHER=y >CONFIG_CRYPTO_KPP2=y >CONFIG_CRYPTO_ACOMP2=y >CONFIG_CRYPTO_RSA=y ># CONFIG_CRYPTO_DH is not set ># CONFIG_CRYPTO_ECDH is not set >CONFIG_CRYPTO_MANAGER=y >CONFIG_CRYPTO_MANAGER2=y ># CONFIG_CRYPTO_USER is not set >CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y ># CONFIG_CRYPTO_GF128MUL is not set >CONFIG_CRYPTO_NULL=m >CONFIG_CRYPTO_NULL2=y ># CONFIG_CRYPTO_PCRYPT is not set >CONFIG_CRYPTO_WORKQUEUE=y ># CONFIG_CRYPTO_CRYPTD is not set ># CONFIG_CRYPTO_MCRYPTD is not set ># CONFIG_CRYPTO_AUTHENC is not set ># CONFIG_CRYPTO_TEST is not set > ># ># Authenticated Encryption with Associated Data ># ># CONFIG_CRYPTO_CCM is not set ># CONFIG_CRYPTO_GCM is not set ># CONFIG_CRYPTO_CHACHA20POLY1305 is not set ># CONFIG_CRYPTO_SEQIV is not set >CONFIG_CRYPTO_ECHAINIV=m > ># ># Block modes ># ># CONFIG_CRYPTO_CBC is not set ># CONFIG_CRYPTO_CTR is not set ># CONFIG_CRYPTO_CTS is not set ># CONFIG_CRYPTO_ECB is not set ># CONFIG_CRYPTO_LRW is not set ># CONFIG_CRYPTO_PCBC is not set ># CONFIG_CRYPTO_XTS is not set ># CONFIG_CRYPTO_KEYWRAP is not set > ># ># Hash modes ># ># CONFIG_CRYPTO_CMAC is not set >CONFIG_CRYPTO_HMAC=m ># CONFIG_CRYPTO_XCBC is not set ># CONFIG_CRYPTO_VMAC is not set > ># ># Digest ># >CONFIG_CRYPTO_CRC32C=y ># CONFIG_CRYPTO_CRC32C_INTEL is not set ># CONFIG_CRYPTO_CRC32 is not set ># CONFIG_CRYPTO_CRC32_PCLMUL is not set ># CONFIG_CRYPTO_CRCT10DIF is not set ># CONFIG_CRYPTO_GHASH is not set ># CONFIG_CRYPTO_POLY1305 is not set ># CONFIG_CRYPTO_POLY1305_X86_64 is not set ># CONFIG_CRYPTO_MD4 is not set ># CONFIG_CRYPTO_MD5 is not set ># CONFIG_CRYPTO_MICHAEL_MIC is not set ># CONFIG_CRYPTO_RMD128 is not set ># CONFIG_CRYPTO_RMD160 is not set ># CONFIG_CRYPTO_RMD256 is not set ># CONFIG_CRYPTO_RMD320 is not set ># CONFIG_CRYPTO_SHA1 is not set ># CONFIG_CRYPTO_SHA1_SSSE3 is not set ># CONFIG_CRYPTO_SHA256_SSSE3 is not set ># CONFIG_CRYPTO_SHA512_SSSE3 is not set ># CONFIG_CRYPTO_SHA1_MB is not set ># CONFIG_CRYPTO_SHA256_MB is not set ># CONFIG_CRYPTO_SHA512_MB is not set >CONFIG_CRYPTO_SHA256=y ># CONFIG_CRYPTO_SHA512 is not set ># CONFIG_CRYPTO_SHA3 is not set ># CONFIG_CRYPTO_SM3 is not set ># CONFIG_CRYPTO_TGR192 is not set ># CONFIG_CRYPTO_WP512 is not set ># CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set > ># ># Ciphers ># >CONFIG_CRYPTO_AES=y ># CONFIG_CRYPTO_AES_TI is not set ># CONFIG_CRYPTO_AES_X86_64 is not set ># CONFIG_CRYPTO_AES_NI_INTEL is not set ># CONFIG_CRYPTO_ANUBIS is not set ># CONFIG_CRYPTO_ARC4 is not set ># CONFIG_CRYPTO_BLOWFISH is not set ># CONFIG_CRYPTO_BLOWFISH_X86_64 is not set ># CONFIG_CRYPTO_CAMELLIA is not set ># CONFIG_CRYPTO_CAMELLIA_X86_64 is not set ># CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set ># CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set ># CONFIG_CRYPTO_CAST5 is not set ># CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set ># CONFIG_CRYPTO_CAST6 is not set ># CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set ># CONFIG_CRYPTO_DES is not set ># CONFIG_CRYPTO_DES3_EDE_X86_64 is not set ># CONFIG_CRYPTO_FCRYPT is not set ># CONFIG_CRYPTO_KHAZAD is not set ># CONFIG_CRYPTO_SALSA20 is not set ># CONFIG_CRYPTO_SALSA20_X86_64 is not set ># CONFIG_CRYPTO_CHACHA20 is not set ># CONFIG_CRYPTO_CHACHA20_X86_64 is not set ># CONFIG_CRYPTO_SEED is not set ># CONFIG_CRYPTO_SERPENT is not set ># CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set ># CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set ># CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set ># CONFIG_CRYPTO_TEA is not set ># CONFIG_CRYPTO_TWOFISH is not set ># CONFIG_CRYPTO_TWOFISH_X86_64 is not set ># CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set ># CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set > ># ># Compression ># >CONFIG_CRYPTO_DEFLATE=y >CONFIG_CRYPTO_LZO=y ># CONFIG_CRYPTO_842 is not set ># CONFIG_CRYPTO_LZ4 is not set ># CONFIG_CRYPTO_LZ4HC is not set > ># ># Random Number Generation ># ># CONFIG_CRYPTO_ANSI_CPRNG is not set >CONFIG_CRYPTO_DRBG_MENU=m >CONFIG_CRYPTO_DRBG_HMAC=y ># CONFIG_CRYPTO_DRBG_HASH is not set >CONFIG_CRYPTO_DRBG=m >CONFIG_CRYPTO_JITTERENTROPY=m ># CONFIG_CRYPTO_USER_API_HASH is not set ># CONFIG_CRYPTO_USER_API_SKCIPHER is not set ># CONFIG_CRYPTO_USER_API_RNG is not set ># CONFIG_CRYPTO_USER_API_AEAD is not set >CONFIG_CRYPTO_HASH_INFO=y ># CONFIG_CRYPTO_HW is not set >CONFIG_ASYMMETRIC_KEY_TYPE=y >CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y >CONFIG_X509_CERTIFICATE_PARSER=y >CONFIG_PKCS7_MESSAGE_PARSER=y ># CONFIG_PKCS7_TEST_KEY is not set ># CONFIG_SIGNED_PE_FILE_VERIFICATION is not set > ># ># Certificates for signature checking ># >CONFIG_SYSTEM_TRUSTED_KEYRING=y >CONFIG_SYSTEM_TRUSTED_KEYS="" ># CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set ># CONFIG_SECONDARY_TRUSTED_KEYRING is not set ># CONFIG_SYSTEM_BLACKLIST_KEYRING is not set >CONFIG_HAVE_KVM=y ># CONFIG_VIRTUALIZATION is not set >CONFIG_BINARY_PRINTF=y > ># ># Library routines ># >CONFIG_BITREVERSE=y ># CONFIG_HAVE_ARCH_BITREVERSE is not set >CONFIG_RATIONAL=y >CONFIG_GENERIC_STRNCPY_FROM_USER=y >CONFIG_GENERIC_STRNLEN_USER=y >CONFIG_GENERIC_NET_UTILS=y >CONFIG_GENERIC_FIND_FIRST_BIT=y >CONFIG_GENERIC_PCI_IOMAP=y >CONFIG_GENERIC_IOMAP=y >CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y >CONFIG_ARCH_HAS_FAST_MULTIPLIER=y ># CONFIG_CRC_CCITT is not set >CONFIG_CRC16=y ># CONFIG_CRC_T10DIF is not set >CONFIG_CRC_ITU_T=y >CONFIG_CRC32=y ># CONFIG_CRC32_SELFTEST is not set >CONFIG_CRC32_SLICEBY8=y ># CONFIG_CRC32_SLICEBY4 is not set ># CONFIG_CRC32_SARWATE is not set ># CONFIG_CRC32_BIT is not set ># CONFIG_CRC4 is not set ># CONFIG_CRC7 is not set >CONFIG_LIBCRC32C=m ># CONFIG_CRC8 is not set ># CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set ># CONFIG_RANDOM32_SELFTEST is not set >CONFIG_ZLIB_INFLATE=y >CONFIG_ZLIB_DEFLATE=y >CONFIG_LZO_COMPRESS=y >CONFIG_LZO_DECOMPRESS=y >CONFIG_LZ4_DECOMPRESS=y >CONFIG_XZ_DEC=y >CONFIG_XZ_DEC_X86=y ># CONFIG_XZ_DEC_POWERPC is not set ># CONFIG_XZ_DEC_IA64 is not set ># CONFIG_XZ_DEC_ARM is not set ># CONFIG_XZ_DEC_ARMTHUMB is not set ># CONFIG_XZ_DEC_SPARC is not set >CONFIG_XZ_DEC_BCJ=y ># CONFIG_XZ_DEC_TEST is not set >CONFIG_DECOMPRESS_GZIP=y >CONFIG_DECOMPRESS_BZIP2=y >CONFIG_DECOMPRESS_LZMA=y >CONFIG_DECOMPRESS_XZ=y >CONFIG_DECOMPRESS_LZO=y >CONFIG_DECOMPRESS_LZ4=y >CONFIG_GENERIC_ALLOCATOR=y >CONFIG_ASSOCIATIVE_ARRAY=y >CONFIG_HAS_IOMEM=y >CONFIG_HAS_IOPORT_MAP=y >CONFIG_HAS_DMA=y ># CONFIG_DMA_NOOP_OPS is not set ># CONFIG_DMA_VIRT_OPS is not set >CONFIG_CPU_RMAP=y >CONFIG_DQL=y >CONFIG_GLOB=y ># CONFIG_GLOB_SELFTEST is not set >CONFIG_NLATTR=y >CONFIG_CLZ_TAB=y ># CONFIG_CORDIC is not set ># CONFIG_DDR is not set ># CONFIG_IRQ_POLL is not set >CONFIG_MPILIB=y >CONFIG_OID_REGISTRY=y ># CONFIG_SG_SPLIT is not set >CONFIG_SG_POOL=y >CONFIG_ARCH_HAS_SG_CHAIN=y >CONFIG_ARCH_HAS_PMEM_API=y >CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y >CONFIG_SBITMAP=y ># CONFIG_STRING_SELFTEST is not set
On 05/17/2018 10:39 AM, Jiri Pirko wrote: >>> That is compiled inside "fixed_phy", isn't it? >> >> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >> built-in, if is modular, it is also modular, this was fixed with >> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >> dsa-loop dependency on FIXED_PHY") > > Now I have it compiled as module, and after modprobe dsa_loop I see: > [ 1168.129202] libphy: Fixed MDIO Bus: probed > [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f > > This messages I did not see when I had fixed_phy compiled as buildin. > > But I still see no netdevs :/ The platform data assumes there is a network device named "eth0" as the parent device, yes I know this is terrible, but unfortunately we don't have anything better at this point, though that could certainly change that to take a proper struct device reference in the future. I am assuming that you don't have such a network device named "eth0" in your system? You can also look at the less than 360 LOCs of the driver and find out where your problem is, this is not mlxsw :)
> The platform data assumes there is a network device named "eth0" as the > parent device, yes I know this is terrible, but unfortunately we don't > have anything better at this point That is something we need to solve. With DT, it is easy, we have a phandle to a device, and the name does not matter. systemd can rename eth0 to enp0s25 and we will still find it, because we don't look for the name, we look for the OF node associated to the device. For platform data driven devices, we don't have this luxury. I have an intel board with a Marvell switch. I have Debian running on it, so systemd renames the interface. Builtin vs modules then becomes an issue. Does the switch driver probe before or after systemd renames the interface? For embedded systems like this, we probably need a way to find an interface based on its bus location, not its name. Not as good, but maybe sufficient, a function which gives us the first physical interface the machine has. Andrew
Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: >On 05/17/2018 10:39 AM, Jiri Pirko wrote: >>>> That is compiled inside "fixed_phy", isn't it? >>> >>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >>> built-in, if is modular, it is also modular, this was fixed with >>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >>> dsa-loop dependency on FIXED_PHY") >> >> Now I have it compiled as module, and after modprobe dsa_loop I see: >> [ 1168.129202] libphy: Fixed MDIO Bus: probed >> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f >> >> This messages I did not see when I had fixed_phy compiled as buildin. >> >> But I still see no netdevs :/ > >The platform data assumes there is a network device named "eth0" as the Oups, I missed, I created dummy device and modprobed again. Now I see: $ sudo devlink port mdio_bus/fixed-0:1f/0: type eth netdev lan1 mdio_bus/fixed-0:1f/1: type eth netdev lan2 mdio_bus/fixed-0:1f/2: type eth netdev lan3 mdio_bus/fixed-0:1f/3: type eth netdev lan4 mdio_bus/fixed-0:1f/4: type notset mdio_bus/fixed-0:1f/5: type notset mdio_bus/fixed-0:1f/6: type notset mdio_bus/fixed-0:1f/7: type notset mdio_bus/fixed-0:1f/8: type notset mdio_bus/fixed-0:1f/9: type notset mdio_bus/fixed-0:1f/10: type notset mdio_bus/fixed-0:1f/11: type notset I wonder why there are ports 4-11 >parent device, yes I know this is terrible, but unfortunately we don't >have anything better at this point, though that could certainly change >that to take a proper struct device reference in the future. > >I am assuming that you don't have such a network device named "eth0" in >your system? You can also look at the less than 360 LOCs of the driver >and find out where your problem is, this is not mlxsw :) Yeah, I'm a bit lost in the embedded/dsa world :)
On Thu, May 17, 2018 at 10:48:55PM +0200, Jiri Pirko wrote: > Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: > >On 05/17/2018 10:39 AM, Jiri Pirko wrote: > >>>> That is compiled inside "fixed_phy", isn't it? > >>> > >>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes > >>> built-in, if is modular, it is also modular, this was fixed with > >>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional > >>> dsa-loop dependency on FIXED_PHY") > >> > >> Now I have it compiled as module, and after modprobe dsa_loop I see: > >> [ 1168.129202] libphy: Fixed MDIO Bus: probed > >> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f > >> > >> This messages I did not see when I had fixed_phy compiled as buildin. > >> > >> But I still see no netdevs :/ > > > >The platform data assumes there is a network device named "eth0" as the > > Oups, I missed, I created dummy device and modprobed again. Now I see: > > $ sudo devlink port > mdio_bus/fixed-0:1f/0: type eth netdev lan1 > mdio_bus/fixed-0:1f/1: type eth netdev lan2 > mdio_bus/fixed-0:1f/2: type eth netdev lan3 > mdio_bus/fixed-0:1f/3: type eth netdev lan4 > mdio_bus/fixed-0:1f/4: type notset > mdio_bus/fixed-0:1f/5: type notset > mdio_bus/fixed-0:1f/6: type notset > mdio_bus/fixed-0:1f/7: type notset > mdio_bus/fixed-0:1f/8: type notset > mdio_bus/fixed-0:1f/9: type notset > mdio_bus/fixed-0:1f/10: type notset > mdio_bus/fixed-0:1f/11: type notset > > I wonder why there are ports 4-11 Hi Jiri ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); It is allocating a switch with 12 ports. However only 4 of them have names. So the core only creates slave devices for those 4. This is a useful test. Real hardware often has unused ports. A WiFi AP with a 7 port switch which only uses 6 ports is often seen. Andrew
On 05/17/2018 02:08 PM, Andrew Lunn wrote: > On Thu, May 17, 2018 at 10:48:55PM +0200, Jiri Pirko wrote: >> Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: >>> On 05/17/2018 10:39 AM, Jiri Pirko wrote: >>>>>> That is compiled inside "fixed_phy", isn't it? >>>>> >>>>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >>>>> built-in, if is modular, it is also modular, this was fixed with >>>>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >>>>> dsa-loop dependency on FIXED_PHY") >>>> >>>> Now I have it compiled as module, and after modprobe dsa_loop I see: >>>> [ 1168.129202] libphy: Fixed MDIO Bus: probed >>>> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f >>>> >>>> This messages I did not see when I had fixed_phy compiled as buildin. >>>> >>>> But I still see no netdevs :/ >>> >>> The platform data assumes there is a network device named "eth0" as the >> >> Oups, I missed, I created dummy device and modprobed again. Now I see: >> >> $ sudo devlink port >> mdio_bus/fixed-0:1f/0: type eth netdev lan1 >> mdio_bus/fixed-0:1f/1: type eth netdev lan2 >> mdio_bus/fixed-0:1f/2: type eth netdev lan3 >> mdio_bus/fixed-0:1f/3: type eth netdev lan4 >> mdio_bus/fixed-0:1f/4: type notset >> mdio_bus/fixed-0:1f/5: type notset >> mdio_bus/fixed-0:1f/6: type notset >> mdio_bus/fixed-0:1f/7: type notset >> mdio_bus/fixed-0:1f/8: type notset >> mdio_bus/fixed-0:1f/9: type notset >> mdio_bus/fixed-0:1f/10: type notset >> mdio_bus/fixed-0:1f/11: type notset >> >> I wonder why there are ports 4-11 > > Hi Jiri > > ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); > > It is allocating a switch with 12 ports. However only 4 of them have > names. So the core only creates slave devices for those 4. > > This is a useful test. Real hardware often has unused ports. A WiFi AP > with a 7 port switch which only uses 6 ports is often seen. The following patch should fix this: diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index adf50fbc4c13..a06c29ec91f0 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); + if (dp->type == DSA_PORT_TYPE_UNUSED) + return 0; + err = devlink_port_register(ds->devlink, &dp->devlink_port, dp->index); if (err) return err; switch (dp->type) { - case DSA_PORT_TYPE_UNUSED: - break; case DSA_PORT_TYPE_CPU: case DSA_PORT_TYPE_DSA: err = dsa_port_link_register_of(dp); @@ -286,6 +287,8 @@ static int dsa_port_setup(struct dsa_port *dp) else devlink_port_type_eth_set(&dp->devlink_port, dp->slave); break; + default: + break; } return 0; @@ -293,11 +296,12 @@ static int dsa_port_setup(struct dsa_port *dp) static void dsa_port_teardown(struct dsa_port *dp) { + if (dp->type == DSA_PORT_TYPE_UNUSED) + return; + devlink_port_unregister(&dp->devlink_port); switch (dp->type) { - case DSA_PORT_TYPE_UNUSED: - break; case DSA_PORT_TYPE_CPU: case DSA_PORT_TYPE_DSA: dsa_port_link_unregister_of(dp); @@ -308,6 +312,8 @@ static void dsa_port_teardown(struct dsa_port *dp) dp->slave = NULL; } break; + default: + break; } }
On Thu, May 17, 2018 at 03:06:36PM -0700, Florian Fainelli wrote: > On 05/17/2018 02:08 PM, Andrew Lunn wrote: > > On Thu, May 17, 2018 at 10:48:55PM +0200, Jiri Pirko wrote: > >> Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: > >>> On 05/17/2018 10:39 AM, Jiri Pirko wrote: > >>>>>> That is compiled inside "fixed_phy", isn't it? > >>>>> > >>>>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes > >>>>> built-in, if is modular, it is also modular, this was fixed with > >>>>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional > >>>>> dsa-loop dependency on FIXED_PHY") > >>>> > >>>> Now I have it compiled as module, and after modprobe dsa_loop I see: > >>>> [ 1168.129202] libphy: Fixed MDIO Bus: probed > >>>> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f > >>>> > >>>> This messages I did not see when I had fixed_phy compiled as buildin. > >>>> > >>>> But I still see no netdevs :/ > >>> > >>> The platform data assumes there is a network device named "eth0" as the > >> > >> Oups, I missed, I created dummy device and modprobed again. Now I see: > >> > >> $ sudo devlink port > >> mdio_bus/fixed-0:1f/0: type eth netdev lan1 > >> mdio_bus/fixed-0:1f/1: type eth netdev lan2 > >> mdio_bus/fixed-0:1f/2: type eth netdev lan3 > >> mdio_bus/fixed-0:1f/3: type eth netdev lan4 > >> mdio_bus/fixed-0:1f/4: type notset > >> mdio_bus/fixed-0:1f/5: type notset > >> mdio_bus/fixed-0:1f/6: type notset > >> mdio_bus/fixed-0:1f/7: type notset > >> mdio_bus/fixed-0:1f/8: type notset > >> mdio_bus/fixed-0:1f/9: type notset > >> mdio_bus/fixed-0:1f/10: type notset > >> mdio_bus/fixed-0:1f/11: type notset > >> > >> I wonder why there are ports 4-11 > > > > Hi Jiri > > > > ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); > > > > It is allocating a switch with 12 ports. However only 4 of them have > > names. So the core only creates slave devices for those 4. > > > > This is a useful test. Real hardware often has unused ports. A WiFi AP > > with a 7 port switch which only uses 6 ports is often seen. > > The following patch should fix this: > > > diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c > index adf50fbc4c13..a06c29ec91f0 100644 > --- a/net/dsa/dsa2.c > +++ b/net/dsa/dsa2.c > @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) > > memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); > > + if (dp->type == DSA_PORT_TYPE_UNUSED) > + return 0; > + > err = devlink_port_register(ds->devlink, &dp->devlink_port, > dp->index); Hi Florian, Jiri Maybe it is better to add a devlink port type unused? Andrew
On 05/17/2018 03:40 PM, Andrew Lunn wrote: > On Thu, May 17, 2018 at 03:06:36PM -0700, Florian Fainelli wrote: >> On 05/17/2018 02:08 PM, Andrew Lunn wrote: >>> On Thu, May 17, 2018 at 10:48:55PM +0200, Jiri Pirko wrote: >>>> Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: >>>>> On 05/17/2018 10:39 AM, Jiri Pirko wrote: >>>>>>>> That is compiled inside "fixed_phy", isn't it? >>>>>>> >>>>>>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >>>>>>> built-in, if is modular, it is also modular, this was fixed with >>>>>>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >>>>>>> dsa-loop dependency on FIXED_PHY") >>>>>> >>>>>> Now I have it compiled as module, and after modprobe dsa_loop I see: >>>>>> [ 1168.129202] libphy: Fixed MDIO Bus: probed >>>>>> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f >>>>>> >>>>>> This messages I did not see when I had fixed_phy compiled as buildin. >>>>>> >>>>>> But I still see no netdevs :/ >>>>> >>>>> The platform data assumes there is a network device named "eth0" as the >>>> >>>> Oups, I missed, I created dummy device and modprobed again. Now I see: >>>> >>>> $ sudo devlink port >>>> mdio_bus/fixed-0:1f/0: type eth netdev lan1 >>>> mdio_bus/fixed-0:1f/1: type eth netdev lan2 >>>> mdio_bus/fixed-0:1f/2: type eth netdev lan3 >>>> mdio_bus/fixed-0:1f/3: type eth netdev lan4 >>>> mdio_bus/fixed-0:1f/4: type notset >>>> mdio_bus/fixed-0:1f/5: type notset >>>> mdio_bus/fixed-0:1f/6: type notset >>>> mdio_bus/fixed-0:1f/7: type notset >>>> mdio_bus/fixed-0:1f/8: type notset >>>> mdio_bus/fixed-0:1f/9: type notset >>>> mdio_bus/fixed-0:1f/10: type notset >>>> mdio_bus/fixed-0:1f/11: type notset >>>> >>>> I wonder why there are ports 4-11 >>> >>> Hi Jiri >>> >>> ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); >>> >>> It is allocating a switch with 12 ports. However only 4 of them have >>> names. So the core only creates slave devices for those 4. >>> >>> This is a useful test. Real hardware often has unused ports. A WiFi AP >>> with a 7 port switch which only uses 6 ports is often seen. >> >> The following patch should fix this: >> >> >> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >> index adf50fbc4c13..a06c29ec91f0 100644 >> --- a/net/dsa/dsa2.c >> +++ b/net/dsa/dsa2.c >> @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) >> >> memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); >> >> + if (dp->type == DSA_PORT_TYPE_UNUSED) >> + return 0; >> + >> err = devlink_port_register(ds->devlink, &dp->devlink_port, >> dp->index); > > Hi Florian, Jiri > > Maybe it is better to add a devlink port type unused? The port does not exist on the switch, so it should not even be registered IMHO.
> >>> ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); > >>> > >>> It is allocating a switch with 12 ports. However only 4 of them have > >>> names. So the core only creates slave devices for those 4. > >>> > >>> This is a useful test. Real hardware often has unused ports. A WiFi AP > >>> with a 7 port switch which only uses 6 ports is often seen. > >> > >> The following patch should fix this: > >> > >> > >> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c > >> index adf50fbc4c13..a06c29ec91f0 100644 > >> --- a/net/dsa/dsa2.c > >> +++ b/net/dsa/dsa2.c > >> @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) > >> > >> memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); > >> > >> + if (dp->type == DSA_PORT_TYPE_UNUSED) > >> + return 0; > >> + > >> err = devlink_port_register(ds->devlink, &dp->devlink_port, > >> dp->index); > > > > Hi Florian, Jiri > > > > Maybe it is better to add a devlink port type unused? > > The port does not exist on the switch, so it should not even be > registered IMHO. Hi Florian The ports do exist, when you called dsa_switch_alloc() you said the switch has 12 ports. Andrew
Fri, May 18, 2018 at 03:41:37AM CEST, andrew@lunn.ch wrote: >> >>> ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); >> >>> >> >>> It is allocating a switch with 12 ports. However only 4 of them have >> >>> names. So the core only creates slave devices for those 4. >> >>> >> >>> This is a useful test. Real hardware often has unused ports. A WiFi AP >> >>> with a 7 port switch which only uses 6 ports is often seen. >> >> >> >> The following patch should fix this: >> >> >> >> >> >> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >> >> index adf50fbc4c13..a06c29ec91f0 100644 >> >> --- a/net/dsa/dsa2.c >> >> +++ b/net/dsa/dsa2.c >> >> @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) >> >> >> >> memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); >> >> >> >> + if (dp->type == DSA_PORT_TYPE_UNUSED) >> >> + return 0; >> >> + >> >> err = devlink_port_register(ds->devlink, &dp->devlink_port, >> >> dp->index); >> > >> > Hi Florian, Jiri >> > >> > Maybe it is better to add a devlink port type unused? >> >> The port does not exist on the switch, so it should not even be >> registered IMHO. > >Hi Florian > >The ports do exist, when you called dsa_switch_alloc() you said the >switch has 12 ports. What benefit does it have to register unused ports? What is a usecase for them. Like Florian, I also think they should not be registered. > > Andrew
Fri, May 18, 2018 at 12:40:17AM CEST, andrew@lunn.ch wrote: >On Thu, May 17, 2018 at 03:06:36PM -0700, Florian Fainelli wrote: >> On 05/17/2018 02:08 PM, Andrew Lunn wrote: >> > On Thu, May 17, 2018 at 10:48:55PM +0200, Jiri Pirko wrote: >> >> Thu, May 17, 2018 at 09:14:32PM CEST, f.fainelli@gmail.com wrote: >> >>> On 05/17/2018 10:39 AM, Jiri Pirko wrote: >> >>>>>> That is compiled inside "fixed_phy", isn't it? >> >>>>> >> >>>>> It matches what CONFIG_FIXED_PHY is, so if it's built-in it also becomes >> >>>>> built-in, if is modular, it is also modular, this was fixed with >> >>>>> 40013ff20b1beed31184935fc0aea6a859d4d4ef ("net: dsa: Fix functional >> >>>>> dsa-loop dependency on FIXED_PHY") >> >>>> >> >>>> Now I have it compiled as module, and after modprobe dsa_loop I see: >> >>>> [ 1168.129202] libphy: Fixed MDIO Bus: probed >> >>>> [ 1168.222716] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f >> >>>> >> >>>> This messages I did not see when I had fixed_phy compiled as buildin. >> >>>> >> >>>> But I still see no netdevs :/ >> >>> >> >>> The platform data assumes there is a network device named "eth0" as the >> >> >> >> Oups, I missed, I created dummy device and modprobed again. Now I see: >> >> >> >> $ sudo devlink port >> >> mdio_bus/fixed-0:1f/0: type eth netdev lan1 >> >> mdio_bus/fixed-0:1f/1: type eth netdev lan2 >> >> mdio_bus/fixed-0:1f/2: type eth netdev lan3 >> >> mdio_bus/fixed-0:1f/3: type eth netdev lan4 >> >> mdio_bus/fixed-0:1f/4: type notset >> >> mdio_bus/fixed-0:1f/5: type notset >> >> mdio_bus/fixed-0:1f/6: type notset >> >> mdio_bus/fixed-0:1f/7: type notset >> >> mdio_bus/fixed-0:1f/8: type notset >> >> mdio_bus/fixed-0:1f/9: type notset >> >> mdio_bus/fixed-0:1f/10: type notset >> >> mdio_bus/fixed-0:1f/11: type notset >> >> >> >> I wonder why there are ports 4-11 >> > >> > Hi Jiri >> > >> > ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS); >> > >> > It is allocating a switch with 12 ports. However only 4 of them have >> > names. So the core only creates slave devices for those 4. >> > >> > This is a useful test. Real hardware often has unused ports. A WiFi AP >> > with a 7 port switch which only uses 6 ports is often seen. >> >> The following patch should fix this: >> >> >> diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c >> index adf50fbc4c13..a06c29ec91f0 100644 >> --- a/net/dsa/dsa2.c >> +++ b/net/dsa/dsa2.c >> @@ -262,13 +262,14 @@ static int dsa_port_setup(struct dsa_port *dp) >> >> memset(&dp->devlink_port, 0, sizeof(dp->devlink_port)); >> >> + if (dp->type == DSA_PORT_TYPE_UNUSED) >> + return 0; >> + >> err = devlink_port_register(ds->devlink, &dp->devlink_port, >> dp->index); > >Hi Florian, Jiri > >Maybe it is better to add a devlink port type unused? The output with my patchset looks like this now: salt:~/iproute2$ sudo devlink/devlink port mdio_bus/fixed-0:1f/0: type eth netdev lan1 flavour physical number 0 mdio_bus/fixed-0:1f/1: type eth netdev lan2 flavour physical number 1 mdio_bus/fixed-0:1f/2: type eth netdev lan3 flavour physical number 2 mdio_bus/fixed-0:1f/3: type eth netdev lan4 flavour physical number 3 mdio_bus/fixed-0:1f/4: type notset mdio_bus/fixed-0:1f/5: type notset flavour cpu number 5 mdio_bus/fixed-0:1f/6: type notset mdio_bus/fixed-0:1f/7: type notset mdio_bus/fixed-0:1f/8: type notset mdio_bus/fixed-0:1f/9: type notset mdio_bus/fixed-0:1f/10: type notset mdio_bus/fixed-0:1f/11: type notset
> What benefit does it have to register unused ports? What is a usecase > for them. Like Florian, I also think they should not be registered. Hi Jiri They physically exist, so we are accurately describing the hardware by registering them. Andrew
On 05/18/2018 06:45 AM, Andrew Lunn wrote: >> What benefit does it have to register unused ports? What is a usecase >> for them. Like Florian, I also think they should not be registered. > > Hi Jiri > > They physically exist, so we are accurately describing the hardware by > registering them. You are right that the driver is advertising a number of ports that does not match what is being expected. We unfortunately do not have a good API for specifying e.g: a sparse port allocation.
diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index adf50fbc4c13..49453690696d 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -270,7 +270,27 @@ static int dsa_port_setup(struct dsa_port *dp) case DSA_PORT_TYPE_UNUSED: break; case DSA_PORT_TYPE_CPU: + /* dp->index is used now as port_number. However + * CPU ports should have separate numbering + * independent from front panel port numbers. + */ + devlink_port_attrs_set(&dp->devlink_port, + DEVLINK_PORT_FLAVOUR_CPU, + dp->index, false, 0); + err = dsa_port_link_register_of(dp); + if (err) { + dev_err(ds->dev, "failed to setup link for port %d.%d\n", + ds->index, dp->index); + return err; + } case DSA_PORT_TYPE_DSA: + /* dp->index is used now as port_number. However + * DSA ports should have separate numbering + * independent from front panel port numbers. + */ + devlink_port_attrs_set(&dp->devlink_port, + DEVLINK_PORT_FLAVOUR_DSA, + dp->index, false, 0); err = dsa_port_link_register_of(dp); if (err) { dev_err(ds->dev, "failed to setup link for port %d.%d\n", @@ -279,6 +299,9 @@ static int dsa_port_setup(struct dsa_port *dp) } break; case DSA_PORT_TYPE_USER: + devlink_port_attrs_set(&dp->devlink_port, + DEVLINK_PORT_FLAVOUR_PHYSICAL, + dp->index, false, 0); err = dsa_slave_create(dp); if (err) dev_err(ds->dev, "failed to create slave for port %d.%d\n",