diff mbox series

[net-next,1/4] mlxsw: pci: Set mbox dma addresses to zero when not used

Message ID 20180319075103.17671-2-idosch@mellanox.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series mlxsw: Adapt driver to upcoming firmware versions | expand

Commit Message

Ido Schimmel March 19, 2018, 7:51 a.m. UTC 
From: Shalom Toledo <shalomt@mellanox.com>

Some of the opcodes don't use in, out or both mboxes. In such cases, the
mbox address is a reserved field and FW expects it to be zero.

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c
index 85faa87bf42d..e30c6ce3dcb4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/pci.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c
@@ -1519,8 +1519,7 @@  static int mlxsw_pci_cmd_exec(void *bus_priv, u16 opcode, u8 opcode_mod,
 			      u8 *p_status)
 {
 	struct mlxsw_pci *mlxsw_pci = bus_priv;
-	dma_addr_t in_mapaddr = mlxsw_pci->cmd.in_mbox.mapaddr;
-	dma_addr_t out_mapaddr = mlxsw_pci->cmd.out_mbox.mapaddr;
+	dma_addr_t in_mapaddr = 0, out_mapaddr = 0;
 	bool evreq = mlxsw_pci->cmd.nopoll;
 	unsigned long timeout = msecs_to_jiffies(MLXSW_PCI_CIR_TIMEOUT_MSECS);
 	bool *p_wait_done = &mlxsw_pci->cmd.wait_done;
@@ -1532,11 +1531,15 @@  static int mlxsw_pci_cmd_exec(void *bus_priv, u16 opcode, u8 opcode_mod,
 	if (err)
 		return err;
 
-	if (in_mbox)
+	if (in_mbox) {
 		memcpy(mlxsw_pci->cmd.in_mbox.buf, in_mbox, in_mbox_size);
+		in_mapaddr = mlxsw_pci->cmd.in_mbox.mapaddr;
+	}
 	mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_HI, upper_32_bits(in_mapaddr));
 	mlxsw_pci_write32(mlxsw_pci, CIR_IN_PARAM_LO, lower_32_bits(in_mapaddr));
 
+	if (out_mbox)
+		out_mapaddr = mlxsw_pci->cmd.out_mbox.mapaddr;
 	mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_HI, upper_32_bits(out_mapaddr));
 	mlxsw_pci_write32(mlxsw_pci, CIR_OUT_PARAM_LO, lower_32_bits(out_mapaddr));