Message ID | 1301295228-12752-5-git-send-email-leiwen@marvell.com |
---|---|
State | Superseded |
Headers | show |
> -----Original Message----- > From: Lei Wen [mailto:leiwen@marvell.com] > Sent: Monday, March 28, 2011 12:24 PM > To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u- > boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu > Tang; adrian.wenl@gmail.com > Subject: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform > > Add i2c support to dkb board with pantheon soc. > > Signed-off-by: Lei Wen <leiwen@marvell.com> > --- > Changelog: > V2: > NO CHANGE > > V3: > clean code sytle issue > Add i2c clock enable code include in I2C configure define block > > V4: > make i2c definition included in the ifdef > > V5: > NO CHANGE > > arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ > arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- > arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- > board/Marvell/dkb/dkb.c | 4 ++++ > include/configs/dkb.h | 13 +++++++++++++ > 5 files changed, 36 insertions(+), 3 deletions(-) > ...snip... > diff --git a/include/configs/dkb.h b/include/configs/dkb.h > index 638af5e..599c8b8 100644 > --- a/include/configs/dkb.h > +++ b/include/configs/dkb.h > @@ -56,6 +56,19 @@ > #include "mv-common.h" > > #undef CONFIG_ARCH_MISC_INIT > + > +/* > + * I2C definition > + */ > +#define CONFIG_CMD_I2C This command definition should be moved up (below #include <config_cmd_default.h> Otherwise ack for rest of the code Regards.. Prafulla . . > +#ifdef CONFIG_CMD_I2C > +#define CONFIG_I2C_MV 1 > +#define CONFIG_PXA_I2C_REG 0xd4011000 > +#define CONFIG_HARD_I2C 1 > +#define CONFIG_SYS_I2C_SPEED 0 > +#define CONFIG_SYS_I2C_SLAVE 0xfe > +#endif > + > /* > * Environment variables configurations > */ > -- > 1.7.0.4
Hi Prafulla, On Tue, Mar 29, 2011 at 9:07 PM, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > >> -----Original Message----- >> From: Lei Wen [mailto:leiwen@marvell.com] >> Sent: Monday, March 28, 2011 12:24 PM >> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u- >> boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu >> Tang; adrian.wenl@gmail.com >> Subject: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform >> >> Add i2c support to dkb board with pantheon soc. >> >> Signed-off-by: Lei Wen <leiwen@marvell.com> >> --- >> Changelog: >> V2: >> NO CHANGE >> >> V3: >> clean code sytle issue >> Add i2c clock enable code include in I2C configure define block >> >> V4: >> make i2c definition included in the ifdef >> >> V5: >> NO CHANGE >> >> arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ >> arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- >> arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- >> board/Marvell/dkb/dkb.c | 4 ++++ >> include/configs/dkb.h | 13 +++++++++++++ >> 5 files changed, 36 insertions(+), 3 deletions(-) >> > ...snip... > >> diff --git a/include/configs/dkb.h b/include/configs/dkb.h >> index 638af5e..599c8b8 100644 >> --- a/include/configs/dkb.h >> +++ b/include/configs/dkb.h >> @@ -56,6 +56,19 @@ >> #include "mv-common.h" >> >> #undef CONFIG_ARCH_MISC_INIT >> + >> +/* >> + * I2C definition >> + */ >> +#define CONFIG_CMD_I2C > > This command definition should be moved up (below #include <config_cmd_default.h> I'm ok to put this define to the config_cmd_default.h, but this mean many other platform need which didn't not need the i2c but include the <config_cmd_default.h>, need to undef the i2c now. Does that worth the change? Best regards, Lei
> -----Original Message----- > From: Lei Wen [mailto:adrian.wenl@gmail.com] > Sent: Wednesday, March 30, 2011 7:36 PM > To: Prafulla Wadaskar > Cc: Lei Wen; Heiko Schocher; Wolfgang Denk; u-boot@lists.denx.de; Marek > Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu Tang > Subject: Re: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform > > Hi Prafulla, > > On Tue, Mar 29, 2011 at 9:07 PM, Prafulla Wadaskar > <prafulla@marvell.com> wrote: > > > > > >> -----Original Message----- > >> From: Lei Wen [mailto:leiwen@marvell.com] > >> Sent: Monday, March 28, 2011 12:24 PM > >> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u- > >> boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; > Yu > >> Tang; adrian.wenl@gmail.com > >> Subject: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform > >> > >> Add i2c support to dkb board with pantheon soc. > >> > >> Signed-off-by: Lei Wen <leiwen@marvell.com> > >> --- > >> Changelog: > >> V2: > >> NO CHANGE > >> > >> V3: > >> clean code sytle issue > >> Add i2c clock enable code include in I2C configure define block > >> > >> V4: > >> make i2c definition included in the ifdef > >> > >> V5: > >> NO CHANGE > >> > >> arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ > >> arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- > >> arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- > >> board/Marvell/dkb/dkb.c | 4 ++++ > >> include/configs/dkb.h | 13 +++++++++++++ > >> 5 files changed, 36 insertions(+), 3 deletions(-) > >> > > ...snip... > > > >> diff --git a/include/configs/dkb.h b/include/configs/dkb.h > >> index 638af5e..599c8b8 100644 > >> --- a/include/configs/dkb.h > >> +++ b/include/configs/dkb.h > >> @@ -56,6 +56,19 @@ > >> #include "mv-common.h" > >> > >> #undef CONFIG_ARCH_MISC_INIT > >> + > >> +/* > >> + * I2C definition > >> + */ > >> +#define CONFIG_CMD_I2C > > > > This command definition should be moved up (below #include > <config_cmd_default.h> > > I'm ok to put this define to the config_cmd_default.h, but this mean > many other platform need > which didn't not need the i2c but include the <config_cmd_default.h>, > need to undef the i2c now. > Does that worth the change? I don't mean here to put it in to the config_cmd_default.h I means put it below #include <config_cmd_default.h> line where other commands are defined/undefed. Regards.. Prafulla . . > > Best regards, > Lei
Hi Prafulla, On Thu, Mar 31, 2011 at 2:56 AM, Prafulla Wadaskar <prafulla@marvell.com> wrote: > > >> -----Original Message----- >> From: Lei Wen [mailto:adrian.wenl@gmail.com] >> Sent: Wednesday, March 30, 2011 7:36 PM >> To: Prafulla Wadaskar >> Cc: Lei Wen; Heiko Schocher; Wolfgang Denk; u-boot@lists.denx.de; Marek >> Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu Tang >> Subject: Re: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform >> >> Hi Prafulla, >> >> On Tue, Mar 29, 2011 at 9:07 PM, Prafulla Wadaskar >> <prafulla@marvell.com> wrote: >> > >> > >> >> -----Original Message----- >> >> From: Lei Wen [mailto:leiwen@marvell.com] >> >> Sent: Monday, March 28, 2011 12:24 PM >> >> To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u- >> >> boot@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; >> Yu >> >> Tang; adrian.wenl@gmail.com >> >> Subject: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform >> >> >> >> Add i2c support to dkb board with pantheon soc. >> >> >> >> Signed-off-by: Lei Wen <leiwen@marvell.com> >> >> --- >> >> Changelog: >> >> V2: >> >> NO CHANGE >> >> >> >> V3: >> >> clean code sytle issue >> >> Add i2c clock enable code include in I2C configure define block >> >> >> >> V4: >> >> make i2c definition included in the ifdef >> >> >> >> V5: >> >> NO CHANGE >> >> >> >> arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ >> >> arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- >> >> arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- >> >> board/Marvell/dkb/dkb.c | 4 ++++ >> >> include/configs/dkb.h | 13 +++++++++++++ >> >> 5 files changed, 36 insertions(+), 3 deletions(-) >> >> >> > ...snip... >> > >> >> diff --git a/include/configs/dkb.h b/include/configs/dkb.h >> >> index 638af5e..599c8b8 100644 >> >> --- a/include/configs/dkb.h >> >> +++ b/include/configs/dkb.h >> >> @@ -56,6 +56,19 @@ >> >> #include "mv-common.h" >> >> >> >> #undef CONFIG_ARCH_MISC_INIT >> >> + >> >> +/* >> >> + * I2C definition >> >> + */ >> >> +#define CONFIG_CMD_I2C >> > >> > This command definition should be moved up (below #include >> <config_cmd_default.h> >> >> I'm ok to put this define to the config_cmd_default.h, but this mean >> many other platform need >> which didn't not need the i2c but include the <config_cmd_default.h>, >> need to undef the i2c now. >> Does that worth the change? > > I don't mean here to put it in to the config_cmd_default.h > I means put it below #include <config_cmd_default.h> line where other commands are defined/undefed. > Understand... Patch to come... Best regards, Lei
diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c index 9ddc77c..8b2eafa 100644 --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c @@ -59,6 +59,12 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apbclkres->gpio); +#ifdef CONFIG_I2C_MV + /* Enable I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); + writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); +#endif + icache_enable(); return 0; @@ -76,3 +82,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_I2C_MV +void i2c_clk_enable(void) +{ +} +#endif diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h index 30f4393..60955c5 100644 --- a/arch/arm/include/asm/arch-pantheon/cpu.h +++ b/arch/arm/include/asm/arch-pantheon/cpu.h @@ -50,7 +50,9 @@ struct panthapb_registers { u32 uart0; /*0x000*/ u32 uart1; /*0x004*/ u32 gpio; /*0x008*/ - u8 pad0[0x034 - 0x08 - 4]; + u8 pad0[0x02c - 0x08 - 4]; + u32 twsi; /*0x02c*/ + u8 pad1[0x034 - 0x2c - 4]; u32 timers; /*0x034*/ }; diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h index fb291cf..e939196 100644 --- a/arch/arm/include/asm/arch-pantheon/mfp.h +++ b/arch/arm/include/asm/arch-pantheon/mfp.h @@ -32,8 +32,10 @@ * offset, pull,pF, drv,dF, edge,eF ,afn,aF */ /* UART2 */ -#define MFP47_UART2_RXD MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP48_UART2_TXD MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM +#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM) /* More macros can be defined here... */ diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c index 72a2d2a..00f73e7 100644 --- a/board/Marvell/dkb/dkb.c +++ b/board/Marvell/dkb/dkb.c @@ -36,6 +36,10 @@ int board_early_init_f(void) MFP47_UART2_RXD, MFP48_UART2_TXD, + /* I2C */ + MFP53_CI2C_SCL, + MFP54_CI2C_SDA, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/include/configs/dkb.h b/include/configs/dkb.h index 638af5e..599c8b8 100644 --- a/include/configs/dkb.h +++ b/include/configs/dkb.h @@ -56,6 +56,19 @@ #include "mv-common.h" #undef CONFIG_ARCH_MISC_INIT + +/* + * I2C definition + */ +#define CONFIG_CMD_I2C +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MV 1 +#define CONFIG_PXA_I2C_REG 0xd4011000 +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#endif + /* * Environment variables configurations */
Add i2c support to dkb board with pantheon soc. Signed-off-by: Lei Wen <leiwen@marvell.com> --- Changelog: V2: NO CHANGE V3: clean code sytle issue Add i2c clock enable code include in I2C configure define block V4: make i2c definition included in the ifdef V5: NO CHANGE arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- board/Marvell/dkb/dkb.c | 4 ++++ include/configs/dkb.h | 13 +++++++++++++ 5 files changed, 36 insertions(+), 3 deletions(-)