diff -r d71c93d01702 libgo/Makefile.am
--- a/libgo/Makefile.am	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/Makefile.am	Sun Mar 27 12:07:37 2011 -0700
@@ -423,6 +423,7 @@
 	runtime/go-unsafe-newarray.c \
 	runtime/go-unsafe-pointer.c \
 	runtime/go-unwind.c \
+	runtime/cpuprof.c \
 	runtime/mcache.c \
 	runtime/mcentral.c \
 	$(runtime_mem_file) \
diff -r d71c93d01702 libgo/runtime/cpuprof.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/libgo/runtime/cpuprof.c	Sun Mar 27 12:07:37 2011 -0700
@@ -0,0 +1,432 @@
+// Copyright 2011 The Go Authors.  All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// CPU profiling.
+// Based on algorithms and data structures used in
+// http://code.google.com/p/google-perftools/.
+//
+// The main difference between this code and the google-perftools
+// code is that this code is written to allow copying the profile data
+// to an arbitrary io.Writer, while the google-perftools code always
+// writes to an operating system file.
+//
+// The signal handler for the profiling clock tick adds a new stack trace
+// to a hash table tracking counts for recent traces.  Most clock ticks
+// hit in the cache.  In the event of a cache miss, an entry must be 
+// evicted from the hash table, copied to a log that will eventually be
+// written as profile data.  The google-perftools code flushed the
+// log itself during the signal handler.  This code cannot do that, because
+// the io.Writer might block or need system calls or locks that are not
+// safe to use from within the signal handler.  Instead, we split the log
+// into two halves and let the signal handler fill one half while a goroutine
+// is writing out the other half.  When the signal handler fills its half, it
+// offers to swap with the goroutine.  If the writer is not done with its half,
+// we lose the stack trace for this clock tick (and record that loss).
+// The goroutine interacts with the signal handler by calling getprofile() to
+// get the next log piece to write, implicitly handing back the last log
+// piece it obtained.
+//
+// The state of this dance between the signal handler and the goroutine
+// is encoded in the Profile.handoff field.  If handoff == 0, then the goroutine
+// is not using either log half and is waiting (or will soon be waiting) for
+// a new piece by calling notesleep(&p->wait).  If the signal handler
+// changes handoff from 0 to non-zero, it must call notewakeup(&p->wait)
+// to wake the goroutine.  The value indicates the number of entries in the
+// log half being handed off.  The goroutine leaves the non-zero value in
+// place until it has finished processing the log half and then flips the number
+// back to zero.  Setting the high bit in handoff means that the profiling is over, 
+// and the goroutine is now in charge of flushing the data left in the hash table
+// to the log and returning that data.  
+//
+// The handoff field is manipulated using atomic operations.
+// For the most part, the manipulation of handoff is orderly: if handoff == 0
+// then the signal handler owns it and can change it to non-zero.  
+// If handoff != 0 then the goroutine owns it and can change it to zero.
+// If that were the end of the story then we would not need to manipulate
+// handoff using atomic operations.  The operations are needed, however,
+// in order to let the log closer set the high bit to indicate "EOF" safely
+// in the situation when normally the goroutine "owns" handoff.
+
+#include "runtime.h"
+#include "malloc.h"
+
+#include "array.h"
+typedef struct __go_open_array Slice;
+#define array __values
+#define len __count
+#define cap __capacity
+
+enum
+{
+	HashSize = 1<<10,
+	LogSize = 1<<17,
+	Assoc = 4,
+	MaxStack = 64,
+};
+
+typedef struct Profile Profile;
+typedef struct Bucket Bucket;
+typedef struct Entry Entry;
+
+struct Entry {
+	uintptr count;
+	uintptr depth;
+	uintptr stack[MaxStack];
+};
+
+struct Bucket {
+	Entry entry[Assoc];
+};
+
+struct Profile {
+	bool on;		// profiling is on
+	Note wait;		// goroutine waits here
+	uintptr count;		// tick count
+	uintptr evicts;		// eviction count
+	uintptr lost;		// lost ticks that need to be logged
+	uintptr totallost;	// total lost ticks
+
+	// Active recent stack traces.
+	Bucket hash[HashSize];
+
+	// Log of traces evicted from hash.
+	// Signal handler has filled log[toggle][:nlog].
+	// Goroutine is writing log[1-toggle][:handoff].
+	uintptr log[2][LogSize/2];
+	uintptr nlog;
+	int32 toggle;
+	uint32 handoff;
+	
+	// Writer state.
+	// Writer maintains its own toggle to avoid races
+	// looking at signal handler's toggle.
+	uint32 wtoggle;
+	bool wholding;	// holding & need to release a log half
+	bool flushing;	// flushing hash table - profile is over
+};
+
+static Lock lk;
+static Profile *prof;
+
+static void tick(uintptr*, int32);
+static void add(Profile*, uintptr*, int32);
+static bool evict(Profile*, Entry*);
+static bool flushlog(Profile*);
+
+// LostProfileData is a no-op function used in profiles
+// to mark the number of profiling stack traces that were
+// discarded due to slow data writers.
+static void LostProfileData(void) {
+}
+
+extern void runtime_SetCPUProfileRate(int32)
+     __asm__("libgo_runtime.runtime.SetCPUProfileRate");
+
+// SetCPUProfileRate sets the CPU profiling rate.
+// The user documentation is in debug.go.
+void
+runtime_SetCPUProfileRate(int32 hz)
+{
+	uintptr *p;
+	uintptr n;
+
+	// Clamp hz to something reasonable.
+	if(hz < 0)
+		hz = 0;
+	if(hz > 1000000)
+		hz = 1000000;
+
+	runtime_lock(&lk);
+	if(hz > 0) {
+		if(prof == nil) {
+			prof = runtime_SysAlloc(sizeof *prof);
+			if(prof == nil) {
+				runtime_printf("runtime: cpu profiling cannot allocate memory\n");
+				runtime_unlock(&lk);
+				return;
+			}
+		}
+		if(prof->on || prof->handoff != 0) {
+			runtime_printf("runtime: cannot set cpu profile rate until previous profile has finished.\n");
+			runtime_unlock(&lk);
+			return;
+		}
+
+		prof->on = true;
+		p = prof->log[0];
+		// pprof binary header format.
+		// http://code.google.com/p/google-perftools/source/browse/trunk/src/profiledata.cc#117
+		*p++ = 0;  // count for header
+		*p++ = 3;  // depth for header
+		*p++ = 0;  // version number
+		*p++ = 1000000 / hz;  // period (microseconds)
+		*p++ = 0;
+		prof->nlog = p - prof->log[0];
+		prof->toggle = 0;
+		prof->wholding = false;
+		prof->wtoggle = 0;
+		prof->flushing = false;
+		runtime_noteclear(&prof->wait);
+
+		runtime_setcpuprofilerate(tick, hz);
+	} else if(prof->on) {
+		runtime_setcpuprofilerate(nil, 0);
+		prof->on = false;
+
+		// Now add is not running anymore, and getprofile owns the entire log.
+		// Set the high bit in prof->handoff to tell getprofile.
+		for(;;) {
+			n = prof->handoff;
+			if(n&0x80000000)
+				runtime_printf("runtime: setcpuprofile(off) twice");
+			if(runtime_cas(&prof->handoff, n, n|0x80000000))
+				break;
+		}
+		if(n == 0) {
+			// we did the transition from 0 -> nonzero so we wake getprofile
+			runtime_notewakeup(&prof->wait);
+		}
+	}
+	runtime_unlock(&lk);
+}
+
+static void
+tick(uintptr *pc, int32 n)
+{
+	add(prof, pc, n);
+}
+
+// add adds the stack trace to the profile.
+// It is called from signal handlers and other limited environments
+// and cannot allocate memory or acquire locks that might be
+// held at the time of the signal, nor can it use substantial amounts
+// of stack.  It is allowed to call evict.
+static void
+add(Profile *p, uintptr *pc, int32 n)
+{
+	int32 i, j;
+	uintptr h, x;
+	Bucket *b;
+	Entry *e;
+
+	if(n > MaxStack)
+		n = MaxStack;
+	
+	// Compute hash.
+	h = 0;
+	for(i=0; i<n; i++) {
+		h = h<<8 | (h>>(8*(sizeof(h)-1)));
+		x = pc[i];
+		h += x*31 + x*7 + x*3;
+	}
+	p->count++;
+
+	// Add to entry count if already present in table.
+	b = &p->hash[h%HashSize];
+	for(i=0; i<Assoc; i++) {
+		e = &b->entry[i];
+		if(e->depth != (uintptr)n)	
+			continue;
+		for(j=0; j<n; j++)
+			if(e->stack[j] != pc[j])
+				goto ContinueAssoc;
+		e->count++;
+		return;
+	ContinueAssoc:;
+	}
+
+	// Evict entry with smallest count.
+	e = &b->entry[0];
+	for(i=1; i<Assoc; i++)
+		if(b->entry[i].count < e->count)
+			e = &b->entry[i];
+	if(e->count > 0) {
+		if(!evict(p, e)) {
+			// Could not evict entry.  Record lost stack.
+			p->lost++;
+			p->totallost++;
+			return;
+		}
+		p->evicts++;
+	}
+	
+	// Reuse the newly evicted entry.
+	e->depth = n;
+	e->count = 1;
+	for(i=0; i<n; i++)
+		e->stack[i] = pc[i];
+}
+
+// evict copies the given entry's data into the log, so that
+// the entry can be reused.  evict is called from add, which
+// is called from the profiling signal handler, so it must not
+// allocate memory or block.  It is safe to call flushLog.
+// evict returns true if the entry was copied to the log,
+// false if there was no room available.
+static bool
+evict(Profile *p, Entry *e)
+{
+	int32 i, d, nslot;
+	uintptr *log, *q;
+	
+	d = e->depth;
+	nslot = d+2;
+	log = p->log[p->toggle];
+	if(p->nlog+nslot > nelem(p->log[0])) {
+		if(!flushlog(p))
+			return false;
+		log = p->log[p->toggle];
+	}
+	
+	q = log+p->nlog;
+	*q++ = e->count;
+	*q++ = d;
+	for(i=0; i<d; i++)
+		*q++ = e->stack[i];
+	p->nlog = q - log;
+	e->count = 0;
+	return true;
+}
+
+// flushlog tries to flush the current log and switch to the other one.
+// flushlog is called from evict, called from add, called from the signal handler,
+// so it cannot allocate memory or block.  It can try to swap logs with
+// the writing goroutine, as explained in the comment at the top of this file.
+static bool
+flushlog(Profile *p)
+{
+	uintptr *log, *q;
+
+	if(!runtime_cas(&p->handoff, 0, p->nlog))
+		return false;
+	runtime_notewakeup(&p->wait);
+
+	p->toggle = 1 - p->toggle;
+	log = p->log[p->toggle];
+	q = log;
+	if(p->lost > 0) {
+		*q++ = p->lost;
+		*q++ = 1;
+		*q++ = (uintptr)LostProfileData;
+	}
+	p->nlog = q - log;
+	return true;
+}
+
+// getprofile blocks until the next block of profiling data is available
+// and returns it as a []byte.  It is called from the writing goroutine.
+Slice
+getprofile(Profile *p)
+{
+	uint32 i, j, n;
+	Slice ret;
+	Bucket *b;
+	Entry *e;
+
+	ret.array = nil;
+	ret.len = 0;
+	ret.cap = 0;
+	
+	if(p == nil)	
+		return ret;
+
+	if(p->wholding) {
+		// Release previous log to signal handling side.
+		// Loop because we are racing against setprofile(off).
+		for(;;) {
+			n = p->handoff;
+			if(n == 0) {
+				runtime_printf("runtime: phase error during cpu profile handoff\n");
+				return ret;
+			}
+			if(n & 0x80000000) {
+				p->wtoggle = 1 - p->wtoggle;
+				p->wholding = false;
+				p->flushing = true;
+				goto flush;
+			}
+			if(runtime_cas(&p->handoff, n, 0))
+				break;
+		}
+		p->wtoggle = 1 - p->wtoggle;
+		p->wholding = false;
+	}
+	
+	if(p->flushing)
+		goto flush;
+	
+	if(!p->on && p->handoff == 0)
+		return ret;
+
+	// Wait for new log.
+	// runtime·entersyscall();
+	runtime_notesleep(&p->wait);
+	// runtime·exitsyscall();
+	runtime_noteclear(&p->wait);
+
+	n = p->handoff;
+	if(n == 0) {
+		runtime_printf("runtime: phase error during cpu profile wait\n");
+		return ret;
+	}
+	if(n == 0x80000000) {
+		p->flushing = true;
+		goto flush;
+	}
+	n &= ~0x80000000;
+
+	// Return new log to caller.
+	p->wholding = true;
+
+	ret.array = (byte*)p->log[p->wtoggle];
+	ret.len = n*sizeof(uintptr);
+	ret.cap = ret.len;
+	return ret;
+
+flush:
+	// In flush mode.
+	// Add is no longer being called.  We own the log.
+	// Also, p->handoff is non-zero, so flushlog will return false.
+	// Evict the hash table into the log and return it.
+	for(i=0; i<HashSize; i++) {
+		b = &p->hash[i];
+		for(j=0; j<Assoc; j++) {
+			e = &b->entry[j];
+			if(e->count > 0 && !evict(p, e)) {
+				// Filled the log.  Stop the loop and return what we've got.
+				goto breakflush;
+			}
+		}
+	}
+breakflush:
+
+	// Return pending log data.
+	if(p->nlog > 0) {
+		// Note that we're using toggle now, not wtoggle,
+		// because we're working on the log directly.
+		ret.array = (byte*)p->log[p->toggle];
+		ret.len = p->nlog*sizeof(uintptr);
+		ret.cap = ret.len;
+		p->nlog = 0;
+		return ret;
+	}
+
+	// Made it through the table without finding anything to log.
+	// Finally done.  Clean up and return nil.
+	p->flushing = false;
+	if(!runtime_cas(&p->handoff, p->handoff, 0))
+		runtime_printf("runtime: profile flush racing with something\n");
+	return ret;  // set to nil at top of function
+}
+
+extern Slice runtime_CPUProfile(void)
+     __asm__("libgo_runtime.runtime.CPUProfile");
+
+// CPUProfile returns the next cpu profile block as a []byte.
+// The user documentation is in debug.go.
+Slice
+runtime_CPUProfile(void)
+{
+	return getprofile(prof);
+}
diff -r d71c93d01702 libgo/runtime/go-note.c
--- a/libgo/runtime/go-note.c	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/runtime/go-note.c	Sun Mar 27 12:07:37 2011 -0700
@@ -21,7 +21,7 @@
    notewakeup.  */
 
 void
-noteclear (Note* n)
+runtime_noteclear (Note* n)
 {
   int32 i;
 
@@ -37,7 +37,7 @@
 /* Wait until notewakeup is called.  */
 
 void
-notesleep (Note* n)
+runtime_notesleep (Note* n)
 {
   int32 i;
 
@@ -57,7 +57,7 @@
 /* Wake up every thread sleeping on the note.  */
 
 void
-notewakeup (Note *n)
+runtime_notewakeup (Note *n)
 {
   int32 i;
 
diff -r d71c93d01702 libgo/runtime/go-signal.c
--- a/libgo/runtime/go-signal.c	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/runtime/go-signal.c	Sun Mar 27 12:07:37 2011 -0700
@@ -6,6 +6,7 @@
 
 #include <signal.h>
 #include <stdlib.h>
+#include <sys/time.h>
 
 #include "go-assert.h"
 #include "go-panic.h"
@@ -13,10 +14,8 @@
 
 #include "runtime.h"
 
-#undef int 
-
-#ifndef SA_ONSTACK
-#define SA_ONSTACK 0
+#ifndef SA_RESTART
+  #define SA_RESTART 0
 #endif
 
 /* What to do for a signal.  */
@@ -27,68 +26,70 @@
   int sig;
   /* Nonzero if the signal should be ignored.  */
   _Bool ignore;
+  /* Nonzero if we should restart system calls.  */
+  _Bool restart;
 };
 
 /* What to do for signals.  */
 
 static struct sigtab signals[] =
 {
-  { SIGHUP, 0 },
-  { SIGINT, 0 },
-  { SIGALRM, 1 },
-  { SIGTERM, 0 },
+  { SIGHUP, 0, 1 },
+  { SIGINT, 0, 1 },
+  { SIGALRM, 1, 1 },
+  { SIGTERM, 0, 1 },
 #ifdef SIGBUS
-  { SIGBUS, 0 },
+  { SIGBUS, 0, 0 },
 #endif
 #ifdef SIGFPE
-  { SIGFPE, 0 },
+  { SIGFPE, 0, 0 },
 #endif
 #ifdef SIGUSR1
-  { SIGUSR1, 1 },
+  { SIGUSR1, 1, 1 },
 #endif
 #ifdef SIGSEGV
-  { SIGSEGV, 0 },
+  { SIGSEGV, 0, 0 },
 #endif
 #ifdef SIGUSR2
-  { SIGUSR2, 1 },
+  { SIGUSR2, 1, 1 },
 #endif
 #ifdef SIGPIPE
-  { SIGPIPE, 1 },
+  { SIGPIPE, 1, 0 },
 #endif
 #ifdef SIGCHLD
-  { SIGCHLD, 1 },
+  { SIGCHLD, 1, 1 },
 #endif
 #ifdef SIGTSTP
-  { SIGTSTP, 1 },
+  { SIGTSTP, 1, 1 },
 #endif
 #ifdef SIGTTIN
-  { SIGTTIN, 1 },
+  { SIGTTIN, 1, 1 },
 #endif
 #ifdef SIGTTOU
-  { SIGTTOU, 1 },
+  { SIGTTOU, 1, 1 },
 #endif
 #ifdef SIGURG
-  { SIGURG, 1 },
+  { SIGURG, 1, 1 },
 #endif
 #ifdef SIGXCPU
-  { SIGXCPU, 1 },
+  { SIGXCPU, 1, 1 },
 #endif
 #ifdef SIGXFSZ
-  { SIGXFSZ, 1 },
+  { SIGXFSZ, 1, 1 },
 #endif
 #ifdef SIGVTARLM
-  { SIGVTALRM, 1 },
+  { SIGVTALRM, 1, 1 },
 #endif
 #ifdef SIGWINCH
-  { SIGWINCH, 1 },
+  { SIGWINCH, 1, 1 },
 #endif
 #ifdef SIGIO
-  { SIGIO, 1 },
+  { SIGIO, 1, 1 },
 #endif
 #ifdef SIGPWR
-  { SIGPWR, 1 },
+  { SIGPWR, 1, 1 },
 #endif
-  { -1, 0 }
+  { -1, 0, 0 }
 };
 
 /* The Go signal handler.  */
@@ -99,6 +100,13 @@
   const char *msg;
   int i;
 
+  if (sig == SIGPROF)
+    {
+      /* FIXME.  */
+      runtime_sigprof (0, 0, nil);
+      return;
+    }
+
   /* FIXME: Should check siginfo for more information when
      available.  */
   msg = NULL;
@@ -192,6 +200,48 @@
   __go_assert (i == 0);
 
   for (i = 0; signals[i].sig != -1; ++i)
-    if (sigaction (signals[i].sig, &sa, NULL) != 0)
-      __go_assert (0);
+    {
+      sa.sa_flags = signals[i].restart ? SA_RESTART : 0;
+      if (sigaction (signals[i].sig, &sa, NULL) != 0)
+	__go_assert (0);
+    }
 }
+
+void
+runtime_resetcpuprofiler(int32 hz)
+{
+  struct itimerval it;
+  struct sigaction sa;
+  int i;
+
+  memset (&it, 0, sizeof it);
+
+  memset (&sa, 0, sizeof sa);
+  i = sigfillset (&sa.sa_mask);
+  __go_assert (i == 0);
+
+  if (hz == 0)
+    {
+      i = setitimer (ITIMER_PROF, &it, NULL);
+      __go_assert (i == 0);
+
+      sa.sa_handler = SIG_IGN;
+      i = sigaction (SIGPROF, &sa, NULL);
+      __go_assert (i == 0);
+    }
+  else
+    {
+      sa.sa_handler = sighandler;
+      sa.sa_flags = SA_RESTART;
+      i = sigaction (SIGPROF, &sa, NULL);
+      __go_assert (i == 0);
+
+      it.it_interval.tv_sec = 0;
+      it.it_interval.tv_usec = 1000000 / hz;
+      it.it_value = it.it_interval;
+      i = setitimer (ITIMER_PROF, &it, NULL);
+      __go_assert (i == 0);
+    }
+
+  m->profilehz = hz;
+}
diff -r d71c93d01702 libgo/runtime/proc.c
--- a/libgo/runtime/proc.c	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/runtime/proc.c	Sun Mar 27 12:07:37 2011 -0700
@@ -14,3 +14,60 @@
 #endif
 
 __thread M *m = &m0;
+
+static struct {
+	Lock;
+	void (*fn)(uintptr*, int32);
+	int32 hz;
+	uintptr pcbuf[100];
+} prof;
+
+void
+runtime_sigprof(uint8 *pc __attribute__ ((unused)),
+		uint8 *sp __attribute__ ((unused)),
+		uint8 *lr __attribute__ ((unused)))
+{
+	int32 n;
+	
+	if(prof.fn == nil || prof.hz == 0)
+		return;
+	
+	runtime_lock(&prof);
+	if(prof.fn == nil) {
+		runtime_unlock(&prof);
+		return;
+	}
+	n = 0;
+	// n = runtime·gentraceback(pc, sp, lr, gp, 0, prof.pcbuf, nelem(prof.pcbuf));
+	if(n > 0)
+		prof.fn(prof.pcbuf, n);
+	runtime_unlock(&prof);
+}
+
+void
+runtime_setcpuprofilerate(void (*fn)(uintptr*, int32), int32 hz)
+{
+	// Force sane arguments.
+	if(hz < 0)
+		hz = 0;
+	if(hz == 0)
+		fn = nil;
+	if(fn == nil)
+		hz = 0;
+
+	// Stop profiler on this cpu so that it is safe to lock prof.
+	// if a profiling signal came in while we had prof locked,
+	// it would deadlock.
+	runtime_resetcpuprofiler(0);
+
+	runtime_lock(&prof);
+	prof.fn = fn;
+	prof.hz = hz;
+	runtime_unlock(&prof);
+	// runtime_lock(&runtime_sched);
+	// runtime_sched.profilehz = hz;
+	// runtime_unlock(&runtime_sched);
+	
+	if(hz != 0)
+		runtime_resetcpuprofiler(hz);
+}
diff -r d71c93d01702 libgo/runtime/runtime.h
--- a/libgo/runtime/runtime.h	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/runtime/runtime.h	Sun Mar 27 12:07:37 2011 -0700
@@ -102,6 +102,7 @@
 	int32	gcing_for_prof;
 	int32	holds_finlock;
 	int32	gcing_for_finlock;
+	int32	profilehz;
 	MCache	*mcache;
 
 	/* For the list of all threads.  */
@@ -163,9 +164,9 @@
  * once notewakeup has been called, all the notesleeps
  * will return.  future notesleeps will return immediately.
  */
-void	noteclear(Note*);
-void	notesleep(Note*);
-void	notewakeup(Note*);
+void	runtime_noteclear(Note*);
+void	runtime_notesleep(Note*);
+void	runtime_notewakeup(Note*);
 
 /* Functions.  */
 #define runtime_printf printf
@@ -187,6 +188,10 @@
 #define runtime_cas(pval, old, new) __sync_bool_compare_and_swap (pval, old, new)
 #define runtime_casp(pval, old, new) __sync_bool_compare_and_swap (pval, old, new)
 
+void	runtime_sigprof(uint8 *pc, uint8 *sp, uint8 *lr);
+void	runtime_resetcpuprofiler(int32);
+void	runtime_setcpuprofilerate(void(*)(uintptr*, int32), int32);
+
 struct __go_func_type;
 void reflect_call(const struct __go_func_type *, const void *, _Bool, void **,
 		  void **)
diff -r d71c93d01702 libgo/runtime/sigqueue.goc
--- a/libgo/runtime/sigqueue.goc	Sun Mar 27 11:06:07 2011 -0700
+++ b/libgo/runtime/sigqueue.goc	Sun Mar 27 12:07:37 2011 -0700
@@ -51,7 +51,7 @@
 void
 siginit(void)
 {
-	noteclear(&sig);
+	runtime_noteclear(&sig);
 }
 
 // Called from sighandler to send a signal back out of the signal handling thread.
@@ -71,7 +71,7 @@
 			// Added to queue.
 			// Only send a wakeup for the first signal in each round.
 			if(mask == 0)
-				notewakeup(&sig);
+				runtime_notewakeup(&sig);
 			break;
 		}
 	}
@@ -81,9 +81,9 @@
 // Called to receive a bitmask of queued signals.
 func Sigrecv() (m uint32) {
 	// runtime·entersyscall();
-	notesleep(&sig);
+	runtime_notesleep(&sig);
 	// runtime·exitsyscall();
-	noteclear(&sig);
+	runtime_noteclear(&sig);
 	for(;;) {
 		m = sig.mask;
 		if(runtime_cas(&sig.mask, m, 0))
