@@ -361,6 +361,7 @@ LIST_ARM9=" \
omap5912osk \
omap730p2 \
openrd_base \
+ openrd_client \
rd6281a \
sbc2410x \
scb9328 \
@@ -118,12 +118,11 @@ int board_init(void)
}
#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1116 PHY */
-void reset_phy(void)
+/* Configure and enable MV88E1116/MV88E1121 PHY */
+void mv_phy_init(char *name)
{
u16 reg;
u16 devadr;
- char *name = "egiga0";
if (miiphy_set_current_dev(name))
return;
@@ -150,4 +149,19 @@ void reset_phy(void)
printf("88E1116 Initialized on %s\n", name);
}
+
+void reset_phy(void)
+{
+ mv_phy_init("egiga0");
+
+#if (MACH_TYPE_OPENRD == MACH_TYPE_OPENRD_CLIENT)
+ /* Kirkwood ethernet driver is written with the assumption that in case
+ * of multiple PHYs, their addresses are consecutive. But unfortunately
+ * in case of OpenRD-Client, PHY addresses are not consecutive.*/
+ miiphy_write("egiga1", 0xEE, 0xEE, 24);
+
+ /* configure and initialize both PHY's */
+ mv_phy_init("egiga1");
+#endif
+}
#endif /* CONFIG_RESET_PHY_R */
@@ -97,6 +97,7 @@ suen3 arm arm926ejs km_arm keymile
guruplug arm arm926ejs - Marvell kirkwood
mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood
openrd_base arm arm926ejs openrd Marvell kirkwood
+openrd_client arm arm926ejs openrd Marvell kirkwood
rd6281a arm arm926ejs - Marvell kirkwood
sheevaplug arm arm926ejs - Marvell kirkwood
dockstar arm arm926ejs - Seagate kirkwood
new file mode 100644
@@ -0,0 +1,44 @@
+/*
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_OPENRD_CLIENT_H
+#define _CONFIG_OPENRD_CLIENT_H
+
+#include <configs/openrd.h>
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nOpenRD-Client"
+
+/* Machine type */
+#define MACH_TYPE_OPENRD MACH_TYPE_OPENRD_CLIENT
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+/* enable both ports */
+#define CONFIG_MVGBE_PORTS {1, 1}
+#define CONFIG_PHY_BASE_ADR 0x8
+#define PHY_NO "88E1116"
+#endif /* CONFIG_CMD_NET */
+
+#endif /* _CONFIG_OPENRD_CLIENT_H */