| Message ID | 20180307215010.30706-1-jcmvbkbc@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | None | expand |
Le 07/03/2018 à 22:50, Max Filippov a écrit : > In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger > than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when > mmap, munmap, mprotect, mremap or shmat is called for an address outside > the guest address space. mmap and mprotect should return ENOMEM in such > case. > > Change definition of GUEST_ADDR_MAX to always be the last valid guest > address. Account for this change in open_self_maps. > Add macro guest_addr_valid that verifies if the guest address is valid. > Add function guest_range_valid that verifies if address range is within > guest address space and does not wrap around. Use that macro in > mmap/munmap/mprotect/mremap/shmat for error checking. > > Cc: qemu-stable@nongnu.org > Cc: Riku Voipio <riku.voipio@iki.fi> > Cc: Laurent Vivier <laurent@vivier.eu> > Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> > --- > Changes v5->v6: > - drop 'if (len)' clause from guest_range_valid and explicitly compare > len with GUEST_ADDR_MAX. > > Changes v4->v5: > - change definition of GUEST_ADDR_MAX to always be the last valid guest > address. Account for this change in guest_addr_valid and open_self_maps. > - turn guest_range_valid into a function. > > Changes v3->v4: > - change GUEST_ADDR_MAX and h2g_valid definitions as suggested by Laurent > Vivier. > > Changes v2->v3: > - fix comparison in guest_valid: it must be 'less' to preserve the existing > functionality, not 'less or equal'. > - fix guest_range_valid: it may not use guest_valid, because single range > that occupies all of the guest address space is valid. > > include/exec/cpu-all.h | 6 +++++- > include/exec/cpu_ldst.h | 16 +++++++--------- > linux-user/mmap.c | 20 +++++++++++++++----- > linux-user/syscall.c | 5 ++++- > 4 files changed, 31 insertions(+), 16 deletions(-) > Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Le 07/03/2018 à 22:50, Max Filippov a écrit : > In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger > than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when > mmap, munmap, mprotect, mremap or shmat is called for an address outside > the guest address space. mmap and mprotect should return ENOMEM in such > case. > > Change definition of GUEST_ADDR_MAX to always be the last valid guest > address. Account for this change in open_self_maps. > Add macro guest_addr_valid that verifies if the guest address is valid. > Add function guest_range_valid that verifies if address range is within > guest address space and does not wrap around. Use that macro in > mmap/munmap/mprotect/mremap/shmat for error checking. > > Cc: qemu-stable@nongnu.org > Cc: Riku Voipio <riku.voipio@iki.fi> > Cc: Laurent Vivier <laurent@vivier.eu> > Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> > --- > Changes v5->v6: > - drop 'if (len)' clause from guest_range_valid and explicitly compare > len with GUEST_ADDR_MAX. > > Changes v4->v5: > - change definition of GUEST_ADDR_MAX to always be the last valid guest > address. Account for this change in guest_addr_valid and open_self_maps. > - turn guest_range_valid into a function. > > Changes v3->v4: > - change GUEST_ADDR_MAX and h2g_valid definitions as suggested by Laurent > Vivier. > > Changes v2->v3: > - fix comparison in guest_valid: it must be 'less' to preserve the existing > functionality, not 'less or equal'. > - fix guest_range_valid: it may not use guest_valid, because single range > that occupies all of the guest address space is valid. > > include/exec/cpu-all.h | 6 +++++- > include/exec/cpu_ldst.h | 16 +++++++--------- > linux-user/mmap.c | 20 +++++++++++++++----- > linux-user/syscall.c | 5 ++++- > 4 files changed, 31 insertions(+), 16 deletions(-) > Applied to my 'linux-user-for-2.12' branch. Thanks, Laurent
diff --git a/include/exec/cpu-all.h b/include/exec/cpu-all.h index 0b141683f095..f4fa94e9669d 100644 --- a/include/exec/cpu-all.h +++ b/include/exec/cpu-all.h @@ -159,8 +159,12 @@ extern unsigned long guest_base; extern int have_guest_base; extern unsigned long reserved_va; -#define GUEST_ADDR_MAX (reserved_va ? reserved_va : \ +#if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS +#define GUEST_ADDR_MAX (~0ul) +#else +#define GUEST_ADDR_MAX (reserved_va ? reserved_va - 1 : \ (1ul << TARGET_VIRT_ADDR_SPACE_BITS) - 1) +#endif #else #include "exec/hwaddr.h" diff --git a/include/exec/cpu_ldst.h b/include/exec/cpu_ldst.h index 191f2e962a3c..5de8c8a5afeb 100644 --- a/include/exec/cpu_ldst.h +++ b/include/exec/cpu_ldst.h @@ -51,15 +51,13 @@ /* All direct uses of g2h and h2g need to go away for usermode softmmu. */ #define g2h(x) ((void *)((unsigned long)(target_ulong)(x) + guest_base)) -#if HOST_LONG_BITS <= TARGET_VIRT_ADDR_SPACE_BITS -#define h2g_valid(x) 1 -#else -#define h2g_valid(x) ({ \ - unsigned long __guest = (unsigned long)(x) - guest_base; \ - (__guest < (1ul << TARGET_VIRT_ADDR_SPACE_BITS)) && \ - (!reserved_va || (__guest < reserved_va)); \ -}) -#endif +#define guest_addr_valid(x) ((x) <= GUEST_ADDR_MAX) +#define h2g_valid(x) guest_addr_valid((unsigned long)(x) - guest_base) + +static inline int guest_range_valid(unsigned long start, unsigned long len) +{ + return len - 1 <= GUEST_ADDR_MAX && start <= GUEST_ADDR_MAX - len + 1; +} #define h2g_nocheck(x) ({ \ unsigned long __ret = (unsigned long)(x) - guest_base; \ diff --git a/linux-user/mmap.c b/linux-user/mmap.c index 0fbfd6dff20d..df81f9b803b6 100644 --- a/linux-user/mmap.c +++ b/linux-user/mmap.c @@ -80,8 +80,9 @@ int target_mprotect(abi_ulong start, abi_ulong len, int prot) return -EINVAL; len = TARGET_PAGE_ALIGN(len); end = start + len; - if (end < start) - return -EINVAL; + if (!guest_range_valid(start, len)) { + return -ENOMEM; + } prot &= PROT_READ | PROT_WRITE | PROT_EXEC; if (len == 0) return 0; @@ -481,8 +482,8 @@ abi_long target_mmap(abi_ulong start, abi_ulong len, int prot, * It can fail only on 64-bit host with 32-bit target. * On any other target/host host mmap() handles this error correctly. */ - if ((unsigned long)start + len - 1 > (abi_ulong) -1) { - errno = EINVAL; + if (!guest_range_valid(start, len)) { + errno = ENOMEM; goto fail; } @@ -622,8 +623,10 @@ int target_munmap(abi_ulong start, abi_ulong len) if (start & ~TARGET_PAGE_MASK) return -EINVAL; len = TARGET_PAGE_ALIGN(len); - if (len == 0) + if (len == 0 || !guest_range_valid(start, len)) { return -EINVAL; + } + mmap_lock(); end = start + len; real_start = start & qemu_host_page_mask; @@ -678,6 +681,13 @@ abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size, int prot; void *host_addr; + if (!guest_range_valid(old_addr, old_size) || + ((flags & MREMAP_FIXED) && + !guest_range_valid(new_addr, new_size))) { + errno = ENOMEM; + return -1; + } + mmap_lock(); if (flags & MREMAP_FIXED) { diff --git a/linux-user/syscall.c b/linux-user/syscall.c index e24f43c4a259..809644742aff 100644 --- a/linux-user/syscall.c +++ b/linux-user/syscall.c @@ -4900,6 +4900,9 @@ static inline abi_ulong do_shmat(CPUArchState *cpu_env, return -TARGET_EINVAL; } } + if (!guest_range_valid(shmaddr, shm_info.shm_segsz)) { + return -TARGET_EINVAL; + } mmap_lock(); @@ -7468,7 +7471,7 @@ static int open_self_maps(void *cpu_env, int fd) } if (h2g_valid(min)) { int flags = page_get_flags(h2g(min)); - max = h2g_valid(max - 1) ? max : (uintptr_t)g2h(GUEST_ADDR_MAX); + max = h2g_valid(max - 1) ? max : (uintptr_t)g2h(GUEST_ADDR_MAX) + 1; if (page_check_range(h2g(min), max - min, flags) == -1) { continue; }
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when mmap, munmap, mprotect, mremap or shmat is called for an address outside the guest address space. mmap and mprotect should return ENOMEM in such case. Change definition of GUEST_ADDR_MAX to always be the last valid guest address. Account for this change in open_self_maps. Add macro guest_addr_valid that verifies if the guest address is valid. Add function guest_range_valid that verifies if address range is within guest address space and does not wrap around. Use that macro in mmap/munmap/mprotect/mremap/shmat for error checking. Cc: qemu-stable@nongnu.org Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> --- Changes v5->v6: - drop 'if (len)' clause from guest_range_valid and explicitly compare len with GUEST_ADDR_MAX. Changes v4->v5: - change definition of GUEST_ADDR_MAX to always be the last valid guest address. Account for this change in guest_addr_valid and open_self_maps. - turn guest_range_valid into a function. Changes v3->v4: - change GUEST_ADDR_MAX and h2g_valid definitions as suggested by Laurent Vivier. Changes v2->v3: - fix comparison in guest_valid: it must be 'less' to preserve the existing functionality, not 'less or equal'. - fix guest_range_valid: it may not use guest_valid, because single range that occupies all of the guest address space is valid. include/exec/cpu-all.h | 6 +++++- include/exec/cpu_ldst.h | 16 +++++++--------- linux-user/mmap.c | 20 +++++++++++++++----- linux-user/syscall.c | 5 ++++- 4 files changed, 31 insertions(+), 16 deletions(-)