[U-Boot] arm64: zynqmp: Remove ep108 board

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 20a4c37d48af..dd691429621c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -146,7 +146,6 @@  dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zturn-myir.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_ARCH_ZYNQMP) += \
-	zynqmp-ep108.dtb			\
 	zynqmp-mini-emmc.dtb			\
 	zynqmp-mini-nand.dtb			\
 	zynqmp-zcu102-revA.dtb			\
diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi
deleted file mode 100644
index 12d9fe149888..000000000000
--- a/arch/arm/dts/zynqmp-ep108-clk.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@ 
-/*
- * clock specification for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/ {
-	misc_clk: misc_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <25000000>;
-		u-boot,dm-pre-reloc;
-	};
-
-	i2c_clk: i2c_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0x0>;
-		clock-frequency = <111111111>;
-	};
-
-	sata_clk: sata_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <75000000>;
-	};
-
-	dp_aclk: clock0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <50000000>;
-		clock-accuracy = <100>;
-	};
-
-	clk100: clk100 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
-	};
-
-	clk600: clk600 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <600000000>;
-	};
-
-	dp_aud_clk: clock1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <22579200>;
-		clock-accuracy = <100>;
-	};
-};
-
-&can0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&can1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&fpd_dma_chan1 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan2 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan3 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan4 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan5 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan6 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan7 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&fpd_dma_chan8 {
-	clocks = <&clk600>, <&clk100>;
-};
-
-&gem0 {
-	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
-};
-
-&gpio {
-	clocks = <&misc_clk>;
-};
-
-&i2c0 {
-	clocks = <&i2c_clk>;
-};
-
-&i2c1 {
-	clocks = <&i2c_clk>;
-};
-
-&nand0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&qspi {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&sata {
-	clocks = <&sata_clk>;
-};
-
-&sdhci0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&sdhci1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&spi0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&spi1 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&uart0 {
-	clocks = <&misc_clk &misc_clk>;
-};
-
-&usb0 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&usb1 {
-	clocks = <&misc_clk>, <&misc_clk>;
-};
-
-&watchdog0 {
-	clocks= <&misc_clk>;
-};
-
-&xilinx_drm {
-	clocks = <&misc_clk>;
-};
-
-&xlnx_dp {
-	clocks = <&dp_aclk>, <&dp_aud_clk>;
-};
-
-&xlnx_dp_snd_codec0 {
-	clocks = <&dp_aud_clk>;
-};
-
-&xlnx_dpdma {
-	clocks = <&misc_clk>;
-};
diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
deleted file mode 100644
index a16ffdc3f0ce..000000000000
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ /dev/null
@@ -1,235 +0,0 @@ 
-/*
- * dts file for Xilinx ZynqMP ep108 development board
- *
- * (C) Copyright 2014 - 2015, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/dts-v1/;
-
-#include "zynqmp.dtsi"
-#include "zynqmp-ep108-clk.dtsi"
-
-/ {
-	model = "ZynqMP EP108";
-
-	aliases {
-		ethernet0 = &gem0;
-		mmc0 = &sdhci0;
-		mmc1 = &sdhci1;
-		serial0 = &uart0;
-		spi0 = &qspi;
-		spi1 = &spi0;
-		spi2 = &spi1;
-		usb0 = &usb0;
-		usb1 = &usb1;
-	};
-
-	chosen {
-		bootargs = "earlycon";
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x0 0x0 0x40000000>;
-	};
-};
-
-&can0 {
-	status = "okay";
-};
-
-&can1 {
-	status = "okay";
-};
-
-&gem0 {
-	status = "okay";
-	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
-	phy0: phy@0 {
-		reg = <0>;
-		max-speed = <100>;
-	};
-};
-
-&gpio {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@54 {
-		compatible = "atmel,24c64";
-		reg = <0x54>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-	eeprom@55 {
-		compatible = "atmel,24c64";
-		reg = <0x55>;
-	};
-};
-
-&nand0 {
-	status = "okay";
-	arasan,has-mdma;
-	num-cs = <1>;
-
-	partition@0 {	/* for testing purpose */
-		label = "nand-fsbl-uboot";
-		reg = <0x0 0x0 0x400000>;
-	};
-	partition@1 {	/* for testing purpose */
-		label = "nand-linux";
-		reg = <0x0 0x400000 0x1400000>;
-	};
-	partition@2 {	/* for testing purpose */
-		label = "nand-device-tree";
-		reg = <0x0 0x1800000 0x400000>;
-	};
-	partition@3 {	/* for testing purpose */
-		label = "nand-rootfs";
-		reg = <0x0 0x1C00000 0x1400000>;
-	};
-	partition@4 {	/* for testing purpose */
-		label = "nand-bitstream";
-		reg = <0x0 0x3000000 0x400000>;
-	};
-	partition@5 {	/* for testing purpose */
-		label = "nand-misc";
-		reg = <0x0 0x3400000 0xFCC00000>;
-	};
-};
-
-&qspi {
-	status = "okay";
-	flash@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-max-frequency = <10000000>;
-		partition@qspi-fsbl-uboot { /* for testing purpose */
-			label = "qspi-fsbl-uboot";
-			reg = <0x0 0x100000>;
-		};
-		partition@qspi-linux { /* for testing purpose */
-			label = "qspi-linux";
-			reg = <0x100000 0x500000>;
-		};
-		partition@qspi-device-tree { /* for testing purpose */
-			label = "qspi-device-tree";
-			reg = <0x600000 0x20000>;
-		};
-		partition@qspi-rootfs { /* for testing purpose */
-			label = "qspi-rootfs";
-			reg = <0x620000 0x5E0000>;
-		};
-	};
-};
-
-&sata {
-	status = "okay";
-	ceva,broken-gen2;
-	/* SATA Phy OOB timing settings */
-	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
-	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
-	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
-	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
-	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
-};
-
-&sdhci0 {
-	status = "okay";
-	bus-width = <8>;
-	xlnx,mio_bank = <2>;
-};
-
-&sdhci1 {
-	status = "okay";
-	xlnx,mio_bank = <1>;
-};
-
-&spi0 {
-	status = "okay";
-	num-cs = <1>;
-	spi0_flash0: spi0_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi0_flash0@0 {
-			label = "spi0_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&spi1 {
-	status = "okay";
-	num-cs = <1>;
-	spi1_flash0: spi1_flash0@0 {
-		compatible = "m25p80";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-
-		spi1_flash0@0 {
-			label = "spi1_flash0";
-			reg = <0x0 0x100000>;
-		};
-	};
-};
-
-&uart0 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&dwc3_0 {
-	status = "okay";
-	dr_mode = "peripheral";
-	maximum-speed = "high-speed";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&dwc3_1 {
-	status = "okay";
-	dr_mode = "host";
-	maximum-speed = "high-speed";
-};
-
-&watchdog0 {
-	status = "okay";
-};
-
-&xlnx_dp {
-	xlnx,max-pclock-frequency = <200000>;
-};
-
-&xlnx_dpdma {
-	xlnx,axi-clock-freq = <200000000>;
-};
diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig
deleted file mode 100644
index a0c8f28b971a..000000000000
--- a/configs/xilinx_zynqmp_ep_defconfig
+++ /dev/null
@@ -1,102 +0,0 @@ 
-CONFIG_ARM=y
-CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep"
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_SYS_TEXT_BASE=0x8000000
-CONFIG_SYS_MALLOC_F_LEN=0x8000
-CONFIG_ZYNQ_SDHCI_MAX_FREQ=52000000
-CONFIG_ZYNQMP_USB=y
-CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
-CONFIG_DEBUG_UART=y
-CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_SPL_LOAD_FIT=y
-# CONFIG_DISPLAY_CPUINFO is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_SPL=y
-CONFIG_SPL_OS_BOOT=y
-CONFIG_SYS_PROMPT="ZynqMP> "
-CONFIG_FASTBOOT=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-CONFIG_CMD_THOR_DOWNLOAD=y
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND_LOCK_UNLOCK=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_TFTPPUT=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_TIME=y
-CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT4_WRITE=y
-# CONFIG_SPL_ISO_PARTITION is not set
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_ENV_IS_IN_FAT=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_SPL_DM=y
-CONFIG_SPL_DM_SEQ_ALIAS=y
-CONFIG_SCSI_AHCI=y
-CONFIG_SATA_CEVA=y
-CONFIG_DFU_RAM=y
-CONFIG_FPGA_XILINX=y
-CONFIG_FPGA_ZYNQMPPL=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_CADENCE=y
-CONFIG_MISC=y
-CONFIG_DM_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ZYNQ=y
-CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
-CONFIG_NAND=y
-CONFIG_NAND_ARASAN=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_WINBOND=y
-# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
-CONFIG_PHY_MARVELL=y
-CONFIG_PHY_NATSEMI=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TI=y
-CONFIG_PHY_VITESSE=y
-CONFIG_DM_ETH=y
-CONFIG_PHY_GIGE=y
-CONFIG_ZYNQ_GEM=y
-CONFIG_SCSI=y
-CONFIG_DM_SCSI=y
-CONFIG_DEBUG_UART_ZYNQ=y
-CONFIG_DEBUG_UART_BASE=0xff000000
-CONFIG_DEBUG_UART_CLOCK=25000000
-CONFIG_DEBUG_UART_ANNOUNCE=y
-CONFIG_ZYNQ_SERIAL=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_XHCI_ZYNQMP=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GADGET=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
-CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
-CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
-CONFIG_USB_FUNCTION_THOR=y
-# CONFIG_REGEX is not set
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h
deleted file mode 100644
index a26377a41274..000000000000
--- a/include/configs/xilinx_zynqmp_ep.h
+++ /dev/null
@@ -1,24 +0,0 @@ 
-/*
- * Configuration for Xilinx ZynqMP emulation platforms
- *
- * (C) Copyright 2014 - 2015 Xilinx, Inc.
- * Michal Simek <michal.simek@xilinx.com>
- * Siva Durga Prasad Paladugu <sivadur@xilinx.com>
- *
- * Based on Configuration for Versatile Express
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQMP_EP_H
-#define __CONFIG_ZYNQMP_EP_H
-
-#define CONFIG_ZYNQ_EEPROM
-#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
-				 ZYNQMP_USB1_XHCI_BASEADDR}
-
-#define COUNTER_FREQUENCY	4000000
-
-#include <configs/xilinx_zynqmp.h>
-
-#endif /* __CONFIG_ZYNQMP_EP_H */