[U-Boot,v2,2/3] usb: xhci-dwc3: Refractor PHY operations into separate function
diff mbox series

Message ID 20180307092010.7091-3-vigneshr@ti.com
State Accepted
Commit 3fc2635d3da8f87675629b6058b646b63d684dff
Delegated to: Bin Meng
Headers show
Series
  • xhci-dwc3: Couple of fixes for USB3 support
Related show

Commit Message

Vignesh Raghavendra March 7, 2018, 9:20 a.m. UTC
Refractor PHY get/init/poweron and PHY poweroff/exit operations into
separate function so that its easy to support multiple PHYs.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---
 drivers/usb/host/xhci-dwc3.c | 75 ++++++++++++++++++++++++++++----------------
 1 file changed, 48 insertions(+), 27 deletions(-)

Comments

Bin Meng March 8, 2018, 4:14 a.m. UTC | #1
On Wed, Mar 7, 2018 at 5:20 PM, Vignesh R <vigneshr@ti.com> wrote:
> Refractor PHY get/init/poweron and PHY poweroff/exit operations into
> separate function so that its easy to support multiple PHYs.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
>  drivers/usb/host/xhci-dwc3.c | 75 ++++++++++++++++++++++++++++----------------
>  1 file changed, 48 insertions(+), 27 deletions(-)
>

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

Patch
diff mbox series

diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
index cf1986bebd07..e61a04eeb8a8 100644
--- a/drivers/usb/host/xhci-dwc3.c
+++ b/drivers/usb/host/xhci-dwc3.c
@@ -112,39 +112,69 @@  void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val)
 }
 
 #ifdef CONFIG_DM_USB
-static int xhci_dwc3_probe(struct udevice *dev)
+static int xhci_dwc3_setup_phy(struct udevice *dev, int index, struct phy *phy)
 {
-	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
-	struct xhci_hcor *hcor;
-	struct xhci_hccr *hccr;
-	struct dwc3 *dwc3_reg;
-	enum usb_dr_mode dr_mode;
-	int ret;
-
-	hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
-	hcor = (struct xhci_hcor *)((uintptr_t)hccr +
-			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
+	int ret = 0;
 
-	ret = generic_phy_get_by_index(dev, 0, &plat->usb_phy);
+	ret = generic_phy_get_by_index(dev, index, phy);
 	if (ret) {
 		if (ret != -ENOENT) {
 			pr_err("Failed to get USB PHY for %s\n", dev->name);
 			return ret;
 		}
 	} else {
-		ret = generic_phy_init(&plat->usb_phy);
+		ret = generic_phy_init(phy);
 		if (ret) {
 			pr_err("Can't init USB PHY for %s\n", dev->name);
 			return ret;
 		}
-
-		ret = generic_phy_power_on(&plat->usb_phy);
+		ret = generic_phy_power_on(phy);
 		if (ret) {
 			pr_err("Can't power on USB PHY for %s\n", dev->name);
+			generic_phy_exit(phy);
 			return ret;
 		}
 	}
 
+	return 0;
+}
+
+static int xhci_dwc3_shutdown_phy(struct phy *phy)
+{
+	int ret = 0;
+
+	if (generic_phy_valid(phy)) {
+		ret = generic_phy_power_off(phy);
+		if (ret)
+			return ret;
+
+		ret = generic_phy_exit(phy);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int xhci_dwc3_probe(struct udevice *dev)
+{
+	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
+	struct xhci_hcor *hcor;
+	struct xhci_hccr *hccr;
+	struct dwc3 *dwc3_reg;
+	enum usb_dr_mode dr_mode;
+	int ret;
+
+	hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev));
+	hcor = (struct xhci_hcor *)((uintptr_t)hccr +
+			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
+
+	ret = xhci_dwc3_setup_phy(dev, 0, &plat->usb_phy);
+	if (ret) {
+		pr_err("Failed to setup USB PHY for %s\n", dev->name);
+		return ret;
+	}
+
 	dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
 
 	dwc3_core_init(dwc3_reg);
@@ -164,19 +194,10 @@  static int xhci_dwc3_remove(struct udevice *dev)
 	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
 	int ret;
 
-	if (generic_phy_valid(&plat->usb_phy)) {
-		ret = generic_phy_power_off(&plat->usb_phy);
-		if (ret) {
-			pr_err("Can't poweroff USB PHY for %s\n", dev->name);
-			return ret;
-		}
+	ret = xhci_dwc3_shutdown_phy(&plat->usb_phy);
+	if (ret)
+		pr_err("Can't shutdown USB PHY for %s\n", dev->name);
 
-		ret = generic_phy_exit(&plat->usb_phy);
-		if (ret) {
-			pr_err("Can't deinit USB PHY for %s\n", dev->name);
-			return ret;
-		}
-	}
 
 	return xhci_deregister(dev);
 }