[v3,3/3] gpio: Add Spreadtrum PMIC EIC driver support

Message ID c84c05b6619a17848a11335f881f42153a4e51c0.1520218279.git.baolin.wang@linaro.org
State New
Headers show
Series
  • [v3,1/3] dt-bindings: gpio: Add Spreadtrum EIC controller documentation
Related show

Commit Message

Baolin Wang March 5, 2018, 2:56 a.m.
The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
and this bank contains 16 EICs. Each EIC can only be used as input mode,
as well as supporting the debounce and the capability to trigger interrupts
when detecting input signals.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
Changes since v2:
 - Fix coding style issue.
 - Fix possible overflow.
 - Use for_each_set_bit().

Changes since v1:
 - New patch.
---
 drivers/gpio/Kconfig              |    8 +
 drivers/gpio/Makefile             |    1 +
 drivers/gpio/gpio-pmic-eic-sprd.c |  330 +++++++++++++++++++++++++++++++++++++
 3 files changed, 339 insertions(+)
 create mode 100644 drivers/gpio/gpio-pmic-eic-sprd.c

Comments

Andy Shevchenko March 5, 2018, 3:46 p.m. | #1
On Mon, Mar 5, 2018 at 4:56 AM, Baolin Wang <baolin.wang@linaro.org> wrote:
> The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
> and this bank contains 16 EICs. Each EIC can only be used as input mode,
> as well as supporting the debounce and the capability to trigger interrupts
> when detecting input signals.
>

FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

for entire series.

> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes since v2:
>  - Fix coding style issue.
>  - Fix possible overflow.
>  - Use for_each_set_bit().
>
> Changes since v1:
>  - New patch.
> ---
>  drivers/gpio/Kconfig              |    8 +
>  drivers/gpio/Makefile             |    1 +
>  drivers/gpio/gpio-pmic-eic-sprd.c |  330 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 339 insertions(+)
>  create mode 100644 drivers/gpio/gpio-pmic-eic-sprd.c
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index c937407..f642314 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -380,6 +380,14 @@ config GPIO_PL061
>         help
>           Say yes here to support the PrimeCell PL061 GPIO device
>
> +config GPIO_PMIC_EIC_SPRD
> +       tristate "Spreadtrum PMIC EIC support"
> +       depends on MFD_SC27XX_PMIC || COMPILE_TEST
> +       depends on OF_GPIO
> +       select GPIOLIB_IRQCHIP
> +       help
> +         Say yes here to support Spreadtrum PMIC EIC device.
> +
>  config GPIO_PXA
>         bool "PXA GPIO support"
>         depends on ARCH_PXA || ARCH_MMP
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 66eaa9e..50ba64b 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -99,6 +99,7 @@ obj-$(CONFIG_GPIO_PCI_IDIO_16)        += gpio-pci-idio-16.o
>  obj-$(CONFIG_GPIO_PCIE_IDIO_24)        += gpio-pcie-idio-24.o
>  obj-$(CONFIG_GPIO_PISOSR)      += gpio-pisosr.o
>  obj-$(CONFIG_GPIO_PL061)       += gpio-pl061.o
> +obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)       += gpio-pmic-eic-sprd.o
>  obj-$(CONFIG_GPIO_PXA)         += gpio-pxa.o
>  obj-$(CONFIG_GPIO_RC5T583)     += gpio-rc5t583.o
>  obj-$(CONFIG_GPIO_RDC321X)     += gpio-rdc321x.o
> diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c
> new file mode 100644
> index 0000000..66d68d9
> --- /dev/null
> +++ b/drivers/gpio/gpio-pmic-eic-sprd.c
> @@ -0,0 +1,330 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Spreadtrum Communications Inc.
> + * Copyright (C) 2018 Linaro Ltd.
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/* EIC registers definition */
> +#define SPRD_PMIC_EIC_DATA             0x0
> +#define SPRD_PMIC_EIC_DMSK             0x4
> +#define SPRD_PMIC_EIC_IEV              0x14
> +#define SPRD_PMIC_EIC_IE               0x18
> +#define SPRD_PMIC_EIC_RIS              0x1c
> +#define SPRD_PMIC_EIC_MIS              0x20
> +#define SPRD_PMIC_EIC_IC               0x24
> +#define SPRD_PMIC_EIC_TRIG             0x28
> +#define SPRD_PMIC_EIC_CTRL0            0x40
> +
> +/*
> + * The PMIC EIC controller only has one bank, and each bank now can contain
> + * 16 EICs.
> + */
> +#define SPRD_PMIC_EIC_PER_BANK_NR      16
> +#define SPRD_PMIC_EIC_NR               SPRD_PMIC_EIC_PER_BANK_NR
> +#define SPRD_PMIC_EIC_DATA_MASK                GENMASK(15, 0)
> +#define SPRD_PMIC_EIC_BIT(x)           ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
> +#define SPRD_PMIC_EIC_DBNC_MASK                GENMASK(11, 0)
> +
> +/*
> + * These registers are modified under the irq bus lock and cached to avoid
> + * unnecessary writes in bus_sync_unlock.
> + */
> +enum {
> +       REG_IEV,
> +       REG_IE,
> +       REG_TRIG,
> +       CACHE_NR_REGS
> +};
> +
> +/**
> + * struct sprd_pmic_eic - PMIC EIC controller
> + * @chip: the gpio_chip structure.
> + * @intc: the irq_chip structure.
> + * @regmap: the regmap from the parent device.
> + * @offset: the EIC controller's offset address of the PMIC.
> + * @reg: the array to cache the EIC registers.
> + * @buslock: for bus lock/sync and unlock.
> + * @irq: the interrupt number of the PMIC EIC conteroller.
> + */
> +struct sprd_pmic_eic {
> +       struct gpio_chip chip;
> +       struct irq_chip intc;
> +       struct regmap *map;
> +       u32 offset;
> +       u8 reg[CACHE_NR_REGS];
> +       struct mutex buslock;
> +       int irq;
> +};
> +
> +static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
> +                                u16 reg, unsigned int val)
> +{
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +       u32 shift = SPRD_PMIC_EIC_BIT(offset);
> +
> +       regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
> +                          BIT(shift), val << shift);
> +}
> +
> +static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
> +                             u16 reg)
> +{
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +       u32 value;
> +       int ret;
> +
> +       ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
> +       if (ret)
> +               return ret;
> +
> +       return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
> +}
> +
> +static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
> +{
> +       sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
> +       return 0;
> +}
> +
> +static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
> +{
> +       sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
> +}
> +
> +static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
> +{
> +       return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
> +}
> +
> +static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
> +                                        unsigned int offset)
> +{
> +       /* EICs are always input, nothing need to do here. */
> +       return 0;
> +}
> +
> +static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
> +                             int value)
> +{
> +       /* EICs are always input, nothing need to do here. */
> +}
> +
> +static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
> +                                     unsigned int offset,
> +                                     unsigned int debounce)
> +{
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +       u32 reg, value;
> +       int ret;
> +
> +       reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
> +       ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
> +       if (ret)
> +               return ret;
> +
> +       value &= ~SPRD_PMIC_EIC_DBNC_MASK;
> +       value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
> +       return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
> +}
> +
> +static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
> +                                   unsigned long config)
> +{
> +       unsigned long param = pinconf_to_config_param(config);
> +       u32 arg = pinconf_to_config_argument(config);
> +
> +       if (param == PIN_CONFIG_INPUT_DEBOUNCE)
> +               return sprd_pmic_eic_set_debounce(chip, offset, arg);
> +
> +       return -ENOTSUPP;
> +}
> +
> +static void sprd_pmic_eic_irq_mask(struct irq_data *data)
> +{
> +       struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +
> +       pmic_eic->reg[REG_IE] = 0;
> +       pmic_eic->reg[REG_TRIG] = 0;
> +}
> +
> +static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
> +{
> +       struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +
> +       pmic_eic->reg[REG_IE] = 1;
> +       pmic_eic->reg[REG_TRIG] = 1;
> +}
> +
> +static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
> +                                     unsigned int flow_type)
> +{
> +       struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +
> +       switch (flow_type) {
> +       case IRQ_TYPE_LEVEL_HIGH:
> +               pmic_eic->reg[REG_IEV] = 1;
> +               break;
> +       case IRQ_TYPE_LEVEL_LOW:
> +               pmic_eic->reg[REG_IEV] = 0;
> +               break;
> +       default:
> +               return -ENOTSUPP;
> +       }
> +
> +       return 0;
> +}
> +
> +static void sprd_pmic_eic_bus_lock(struct irq_data *data)
> +{
> +       struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +
> +       mutex_lock(&pmic_eic->buslock);
> +}
> +
> +static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
> +{
> +       struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
> +       struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
> +       u32 offset = irqd_to_hwirq(data);
> +
> +       /* Set irq type */
> +       sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
> +                            pmic_eic->reg[REG_IEV]);
> +       /* Set irq unmask */
> +       sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
> +                            pmic_eic->reg[REG_IE]);
> +       /* Generate trigger start pulse for debounce EIC */
> +       sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
> +                            pmic_eic->reg[REG_TRIG]);
> +
> +       mutex_unlock(&pmic_eic->buslock);
> +}
> +
> +static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
> +{
> +       struct sprd_pmic_eic *pmic_eic = data;
> +       struct gpio_chip *chip = &pmic_eic->chip;
> +       unsigned long status;
> +       u32 n, girq, val;
> +       int ret;
> +
> +       ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
> +                         &val);
> +       if (ret)
> +               return IRQ_RETVAL(ret);
> +
> +       status = val & SPRD_PMIC_EIC_DATA_MASK;
> +
> +       for_each_set_bit(n, &status, chip->ngpio) {
> +               /* Clear the interrupt */
> +               sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
> +
> +               girq = irq_find_mapping(chip->irq.domain, n);
> +               handle_nested_irq(girq);
> +       }
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int sprd_pmic_eic_probe(struct platform_device *pdev)
> +{
> +       struct gpio_irq_chip *irq;
> +       struct sprd_pmic_eic *pmic_eic;
> +       int ret;
> +
> +       pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
> +       if (!pmic_eic)
> +               return -ENOMEM;
> +
> +       mutex_init(&pmic_eic->buslock);
> +
> +       pmic_eic->irq = platform_get_irq(pdev, 0);
> +       if (pmic_eic->irq < 0) {
> +               dev_err(&pdev->dev, "Failed to get PMIC EIC interrupt.\n");
> +               return pmic_eic->irq;
> +       }
> +
> +       pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
> +       if (!pmic_eic->map)
> +               return -ENODEV;
> +
> +       ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
> +               return ret;
> +       }
> +
> +       ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
> +                                       sprd_pmic_eic_irq_handler,
> +                                       IRQF_TRIGGER_LOW |
> +                                       IRQF_ONESHOT | IRQF_NO_SUSPEND,
> +                                       dev_name(&pdev->dev), pmic_eic);
> +       if (ret) {
> +               dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
> +               return ret;
> +       }
> +
> +       pmic_eic->chip.label = dev_name(&pdev->dev);
> +       pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
> +       pmic_eic->chip.base = -1;
> +       pmic_eic->chip.parent = &pdev->dev;
> +       pmic_eic->chip.of_node = pdev->dev.of_node;
> +       pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
> +       pmic_eic->chip.request = sprd_pmic_eic_request;
> +       pmic_eic->chip.free = sprd_pmic_eic_free;
> +       pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
> +       pmic_eic->chip.set = sprd_pmic_eic_set;
> +       pmic_eic->chip.get = sprd_pmic_eic_get;
> +
> +       pmic_eic->intc.name = dev_name(&pdev->dev);
> +       pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
> +       pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask;
> +       pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type;
> +       pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock;
> +       pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock;
> +       pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
> +
> +       irq = &pmic_eic->chip.irq;
> +       irq->chip = &pmic_eic->intc;
> +       irq->threaded = true;
> +
> +       ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
> +       if (ret < 0) {
> +               dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
> +               return ret;
> +       }
> +
> +       platform_set_drvdata(pdev, pmic_eic);
> +       return 0;
> +}
> +
> +static const struct of_device_id sprd_pmic_eic_of_match[] = {
> +       { .compatible = "sprd,sc27xx-eic", },
> +       { /* end of list */ }
> +};
> +MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
> +
> +static struct platform_driver sprd_pmic_eic_driver = {
> +       .probe = sprd_pmic_eic_probe,
> +       .driver = {
> +               .name = "sprd-pmic-eic",
> +               .of_match_table = sprd_pmic_eic_of_match,
> +       },
> +};
> +
> +module_platform_driver(sprd_pmic_eic_driver);
> +
> +MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
>
Baolin Wang March 27, 2018, 9:10 a.m. | #2
On 5 March 2018 at 23:46, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
> On Mon, Mar 5, 2018 at 4:56 AM, Baolin Wang <baolin.wang@linaro.org> wrote:
>> The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
>> and this bank contains 16 EICs. Each EIC can only be used as input mode,
>> as well as supporting the debounce and the capability to trigger interrupts
>> when detecting input signals.
>>
>
> FWIW,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
>
> for entire series.

Thanks Andy.

Linus, could you apply this series if there are no other issues? Thanks.
Linus Walleij March 27, 2018, 1:52 p.m. | #3
On Mon, Mar 5, 2018 at 3:56 AM, Baolin Wang <baolin.wang@linaro.org> wrote:

> The Spreadtrum PMIC EIC controller contains only one bank of debounce EIC,
> and this bank contains 16 EICs. Each EIC can only be used as input mode,
> as well as supporting the debounce and the capability to trigger interrupts
> when detecting input signals.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> Changes since v2:
>  - Fix coding style issue.
>  - Fix possible overflow.
>  - Use for_each_set_bit().

Patch applied!

Also added Andy's review tag on all of the patches.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c937407..f642314 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -380,6 +380,14 @@  config GPIO_PL061
 	help
 	  Say yes here to support the PrimeCell PL061 GPIO device
 
+config GPIO_PMIC_EIC_SPRD
+	tristate "Spreadtrum PMIC EIC support"
+	depends on MFD_SC27XX_PMIC || COMPILE_TEST
+	depends on OF_GPIO
+	select GPIOLIB_IRQCHIP
+	help
+	  Say yes here to support Spreadtrum PMIC EIC device.
+
 config GPIO_PXA
 	bool "PXA GPIO support"
 	depends on ARCH_PXA || ARCH_MMP
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 66eaa9e..50ba64b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -99,6 +99,7 @@  obj-$(CONFIG_GPIO_PCI_IDIO_16)	+= gpio-pci-idio-16.o
 obj-$(CONFIG_GPIO_PCIE_IDIO_24)	+= gpio-pcie-idio-24.o
 obj-$(CONFIG_GPIO_PISOSR)	+= gpio-pisosr.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_GPIO_PMIC_EIC_SPRD)	+= gpio-pmic-eic-sprd.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RC5T583)	+= gpio-rc5t583.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
diff --git a/drivers/gpio/gpio-pmic-eic-sprd.c b/drivers/gpio/gpio-pmic-eic-sprd.c
new file mode 100644
index 0000000..66d68d9
--- /dev/null
+++ b/drivers/gpio/gpio-pmic-eic-sprd.c
@@ -0,0 +1,330 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* EIC registers definition */
+#define SPRD_PMIC_EIC_DATA		0x0
+#define SPRD_PMIC_EIC_DMSK		0x4
+#define SPRD_PMIC_EIC_IEV		0x14
+#define SPRD_PMIC_EIC_IE		0x18
+#define SPRD_PMIC_EIC_RIS		0x1c
+#define SPRD_PMIC_EIC_MIS		0x20
+#define SPRD_PMIC_EIC_IC		0x24
+#define SPRD_PMIC_EIC_TRIG		0x28
+#define SPRD_PMIC_EIC_CTRL0		0x40
+
+/*
+ * The PMIC EIC controller only has one bank, and each bank now can contain
+ * 16 EICs.
+ */
+#define SPRD_PMIC_EIC_PER_BANK_NR	16
+#define SPRD_PMIC_EIC_NR		SPRD_PMIC_EIC_PER_BANK_NR
+#define SPRD_PMIC_EIC_DATA_MASK		GENMASK(15, 0)
+#define SPRD_PMIC_EIC_BIT(x)		((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
+#define SPRD_PMIC_EIC_DBNC_MASK		GENMASK(11, 0)
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum {
+	REG_IEV,
+	REG_IE,
+	REG_TRIG,
+	CACHE_NR_REGS
+};
+
+/**
+ * struct sprd_pmic_eic - PMIC EIC controller
+ * @chip: the gpio_chip structure.
+ * @intc: the irq_chip structure.
+ * @regmap: the regmap from the parent device.
+ * @offset: the EIC controller's offset address of the PMIC.
+ * @reg: the array to cache the EIC registers.
+ * @buslock: for bus lock/sync and unlock.
+ * @irq: the interrupt number of the PMIC EIC conteroller.
+ */
+struct sprd_pmic_eic {
+	struct gpio_chip chip;
+	struct irq_chip intc;
+	struct regmap *map;
+	u32 offset;
+	u8 reg[CACHE_NR_REGS];
+	struct mutex buslock;
+	int irq;
+};
+
+static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
+				 u16 reg, unsigned int val)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 shift = SPRD_PMIC_EIC_BIT(offset);
+
+	regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
+			   BIT(shift), val << shift);
+}
+
+static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
+			      u16 reg)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 value;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
+}
+
+static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
+	return 0;
+}
+
+static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
+{
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
+}
+
+static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
+{
+	return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
+}
+
+static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
+					 unsigned int offset)
+{
+	/* EICs are always input, nothing need to do here. */
+	return 0;
+}
+
+static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
+			      int value)
+{
+	/* EICs are always input, nothing need to do here. */
+}
+
+static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
+				      unsigned int offset,
+				      unsigned int debounce)
+{
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 reg, value;
+	int ret;
+
+	reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
+	if (ret)
+		return ret;
+
+	value &= ~SPRD_PMIC_EIC_DBNC_MASK;
+	value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
+	return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
+}
+
+static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
+				    unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_INPUT_DEBOUNCE)
+		return sprd_pmic_eic_set_debounce(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+static void sprd_pmic_eic_irq_mask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	pmic_eic->reg[REG_IE] = 0;
+	pmic_eic->reg[REG_TRIG] = 0;
+}
+
+static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	pmic_eic->reg[REG_IE] = 1;
+	pmic_eic->reg[REG_TRIG] = 1;
+}
+
+static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
+				      unsigned int flow_type)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	switch (flow_type) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		pmic_eic->reg[REG_IEV] = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		pmic_eic->reg[REG_IEV] = 0;
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return 0;
+}
+
+static void sprd_pmic_eic_bus_lock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+
+	mutex_lock(&pmic_eic->buslock);
+}
+
+static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
+{
+	struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+	struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
+	u32 offset = irqd_to_hwirq(data);
+
+	/* Set irq type */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
+			     pmic_eic->reg[REG_IEV]);
+	/* Set irq unmask */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
+			     pmic_eic->reg[REG_IE]);
+	/* Generate trigger start pulse for debounce EIC */
+	sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
+			     pmic_eic->reg[REG_TRIG]);
+
+	mutex_unlock(&pmic_eic->buslock);
+}
+
+static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
+{
+	struct sprd_pmic_eic *pmic_eic = data;
+	struct gpio_chip *chip = &pmic_eic->chip;
+	unsigned long status;
+	u32 n, girq, val;
+	int ret;
+
+	ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
+			  &val);
+	if (ret)
+		return IRQ_RETVAL(ret);
+
+	status = val & SPRD_PMIC_EIC_DATA_MASK;
+
+	for_each_set_bit(n, &status, chip->ngpio) {
+		/* Clear the interrupt */
+		sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
+
+		girq = irq_find_mapping(chip->irq.domain, n);
+		handle_nested_irq(girq);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int sprd_pmic_eic_probe(struct platform_device *pdev)
+{
+	struct gpio_irq_chip *irq;
+	struct sprd_pmic_eic *pmic_eic;
+	int ret;
+
+	pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
+	if (!pmic_eic)
+		return -ENOMEM;
+
+	mutex_init(&pmic_eic->buslock);
+
+	pmic_eic->irq = platform_get_irq(pdev, 0);
+	if (pmic_eic->irq < 0) {
+		dev_err(&pdev->dev, "Failed to get PMIC EIC interrupt.\n");
+		return pmic_eic->irq;
+	}
+
+	pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pmic_eic->map)
+		return -ENODEV;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
+		return ret;
+	}
+
+	ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
+					sprd_pmic_eic_irq_handler,
+					IRQF_TRIGGER_LOW |
+					IRQF_ONESHOT | IRQF_NO_SUSPEND,
+					dev_name(&pdev->dev), pmic_eic);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
+		return ret;
+	}
+
+	pmic_eic->chip.label = dev_name(&pdev->dev);
+	pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
+	pmic_eic->chip.base = -1;
+	pmic_eic->chip.parent = &pdev->dev;
+	pmic_eic->chip.of_node = pdev->dev.of_node;
+	pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
+	pmic_eic->chip.request = sprd_pmic_eic_request;
+	pmic_eic->chip.free = sprd_pmic_eic_free;
+	pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
+	pmic_eic->chip.set = sprd_pmic_eic_set;
+	pmic_eic->chip.get = sprd_pmic_eic_get;
+
+	pmic_eic->intc.name = dev_name(&pdev->dev);
+	pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
+	pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask;
+	pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type;
+	pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock;
+	pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock;
+	pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
+
+	irq = &pmic_eic->chip.irq;
+	irq->chip = &pmic_eic->intc;
+	irq->threaded = true;
+
+	ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, pmic_eic);
+	return 0;
+}
+
+static const struct of_device_id sprd_pmic_eic_of_match[] = {
+	{ .compatible = "sprd,sc27xx-eic", },
+	{ /* end of list */ }
+};
+MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
+
+static struct platform_driver sprd_pmic_eic_driver = {
+	.probe = sprd_pmic_eic_probe,
+	.driver = {
+		.name = "sprd-pmic-eic",
+		.of_match_table	= sprd_pmic_eic_of_match,
+	},
+};
+
+module_platform_driver(sprd_pmic_eic_driver);
+
+MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
+MODULE_LICENSE("GPL v2");