diff mbox series

[net-next,5/6] enic: enable rq before updating rq descriptors

Message ID 20180301190724.3192-6-gvaradar@cisco.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series enic update | expand

Commit Message

Govindarajulu Varadarajan March 1, 2018, 7:07 p.m. UTC 
rq should be enabled before posting the buffers to rq desc. If not hw sees
stale value and casuses DMAR errors.

Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
---
 drivers/net/ethernet/cisco/enic/enic_main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 5213bc01a6e9..243d5c5fd5e3 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c
@@ -1939,6 +1939,8 @@  static int enic_open(struct net_device *netdev)
 	}
 
 	for (i = 0; i < enic->rq_count; i++) {
+		/* enable rq before updating rq desc */
+		vnic_rq_enable(&enic->rq[i]);
 		vnic_rq_fill(&enic->rq[i], enic_rq_alloc_buf);
 		/* Need at least one buffer on ring to get going */
 		if (vnic_rq_desc_used(&enic->rq[i]) == 0) {
@@ -1950,8 +1952,6 @@  static int enic_open(struct net_device *netdev)
 
 	for (i = 0; i < enic->wq_count; i++)
 		vnic_wq_enable(&enic->wq[i]);
-	for (i = 0; i < enic->rq_count; i++)
-		vnic_rq_enable(&enic->rq[i]);
 
 	if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic))
 		enic_dev_add_station_addr(enic);
@@ -1977,8 +1977,12 @@  static int enic_open(struct net_device *netdev)
 	return 0;
 
 err_out_free_rq:
-	for (i = 0; i < enic->rq_count; i++)
+	for (i = 0; i < enic->rq_count; i++) {
+		err = vnic_rq_disable(&enic->rq[i]);
+		if (err)
+			return err;
 		vnic_rq_clean(&enic->rq[i], enic_free_rq_buf);
+	}
 	enic_dev_notify_unset(enic);
 err_out_free_intr:
 	enic_unset_affinity_hint(enic);