From patchwork Tue Mar 22 20:40:17 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: John Rigby X-Patchwork-Id: 87958 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 43515B6F73 for ; Wed, 23 Mar 2011 07:41:31 +1100 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id E4A41280AC; Tue, 22 Mar 2011 21:41:25 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 4wNkoZH0ch-V; Tue, 22 Mar 2011 21:41:25 +0100 (CET) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 3B083280A0; Tue, 22 Mar 2011 21:41:15 +0100 (CET) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id B226A2809B for ; Tue, 22 Mar 2011 21:41:10 +0100 (CET) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id k3bRHeMlH7Oe for ; Tue, 22 Mar 2011 21:41:04 +0100 (CET) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-pz0-f44.google.com (mail-pz0-f44.google.com [209.85.210.44]) by theia.denx.de (Postfix) with ESMTPS id 0C8E028096 for ; Tue, 22 Mar 2011 21:41:00 +0100 (CET) Received: by pzk30 with SMTP id 30so950095pzk.3 for ; Tue, 22 Mar 2011 13:40:59 -0700 (PDT) Received: by 10.142.173.9 with SMTP id v9mr4540173wfe.263.1300826458320; Tue, 22 Mar 2011 13:40:58 -0700 (PDT) Received: from localhost.localdomain (c-76-23-54-220.hsd1.ut.comcast.net [76.23.54.220]) by mx.google.com with ESMTPS id n4sm9096243wfl.2.2011.03.22.13.40.51 (version=TLSv1/SSLv3 cipher=OTHER); Tue, 22 Mar 2011 13:40:56 -0700 (PDT) From: John Rigby To: u-boot@lists.denx.de Date: Tue, 22 Mar 2011 14:40:17 -0600 Message-Id: <1300826419-18632-3-git-send-email-john.rigby@linaro.org> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1300826419-18632-1-git-send-email-john.rigby@linaro.org> References: <1300826419-18632-1-git-send-email-john.rigby@linaro.org> Cc: Rabin Vincent , Mathieu Poirier , patches@linaro.org Subject: [U-Boot] [PATCH 2/4] armv7: Add ST-Ericsson u8500 arch X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.9 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de From: Rabin Vincent Signed-off-by: Rabin Vincent Signed-off-by: Mathieu Poirier Signed-off-by: John Rigby --- arch/arm/cpu/armv7/u8500/Makefile | 46 +++ arch/arm/cpu/armv7/u8500/clock.c | 56 +++ arch/arm/cpu/armv7/u8500/lowlevel.S | 33 ++ arch/arm/cpu/armv7/u8500/timer.c | 167 +++++++++ arch/arm/include/asm/arch-u8500/ab8500.h | 523 ++++++++++++++++++++++++++++ arch/arm/include/asm/arch-u8500/bits.h | 58 +++ arch/arm/include/asm/arch-u8500/clock.h | 72 ++++ arch/arm/include/asm/arch-u8500/common.h | 107 ++++++ arch/arm/include/asm/arch-u8500/gpio.h | 247 +++++++++++++ arch/arm/include/asm/arch-u8500/hardware.h | 83 +++++ arch/arm/include/asm/arch-u8500/u8500.h | 47 +++ 11 files changed, 1439 insertions(+), 0 deletions(-) create mode 100644 arch/arm/cpu/armv7/u8500/Makefile create mode 100644 arch/arm/cpu/armv7/u8500/clock.c create mode 100644 arch/arm/cpu/armv7/u8500/lowlevel.S create mode 100644 arch/arm/cpu/armv7/u8500/timer.c create mode 100644 arch/arm/include/asm/arch-u8500/ab8500.h create mode 100644 arch/arm/include/asm/arch-u8500/bits.h create mode 100644 arch/arm/include/asm/arch-u8500/clock.h create mode 100644 arch/arm/include/asm/arch-u8500/common.h create mode 100644 arch/arm/include/asm/arch-u8500/gpio.h create mode 100644 arch/arm/include/asm/arch-u8500/hardware.h create mode 100644 arch/arm/include/asm/arch-u8500/u8500.h diff --git a/arch/arm/cpu/armv7/u8500/Makefile b/arch/arm/cpu/armv7/u8500/Makefile new file mode 100644 index 0000000..270aa40 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/Makefile @@ -0,0 +1,46 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS = timer.o clock.o +SOBJS = lowlevel.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/u8500/clock.c b/arch/arm/cpu/armv7/u8500/clock.c new file mode 100644 index 0000000..9e3b873 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/clock.c @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2009 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +struct clkrst { + unsigned int pcken; + unsigned int pckdis; + unsigned int kcken; + unsigned int kckdis; +}; + +static unsigned int clkrst_base[] = { + U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + 0, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE, + U8500_CLKRST7_BASE, /* ED only */ +}; + +/* Turn on peripheral clock at PRCC level */ +void u8500_clock_enable(int periph, int cluster, int kern) +{ + struct clkrst *clkrst = (struct clkrst *) clkrst_base[periph - 1]; + + if (kern != -1) + writel(1 << kern, &clkrst->kcken); + + if (cluster != -1) + writel(1 << cluster, &clkrst->pcken); +} diff --git a/arch/arm/cpu/armv7/u8500/lowlevel.S b/arch/arm/cpu/armv7/u8500/lowlevel.S new file mode 100644 index 0000000..0e3f8fc --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/lowlevel.S @@ -0,0 +1,33 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +.globl lowlevel_init +lowlevel_init: + mov pc, lr + + .align 5 +.globl reset_cpu +reset_cpu: + ldr r0, =CFG_PRCMU_BASE + ldr r1, =0x1 + str r1, [r0, #0x228] +_loop_forever: + b _loop_forever diff --git a/arch/arm/cpu/armv7/u8500/timer.c b/arch/arm/cpu/armv7/u8500/timer.c new file mode 100644 index 0000000..8850fd5 --- /dev/null +++ b/arch/arm/cpu/armv7/u8500/timer.c @@ -0,0 +1,167 @@ +/* + * Copyright (C) 2010 Linaro Limited + * John Rigby + * + * Based on original from Linux kernel source and + * internal ST-Ericsson U-Boot source. + * (C) Copyright 2009 Alessandro Rubini + * (C) Copyright 2010 ST-Ericsson + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * The MTU device has some interrupt control registers + * followed by 4 timers. + */ + +/* The timers */ +struct u8500_mtu_timer { + u32 lr; /* Load value */ + u32 cv; /* Current value */ + u32 cr; /* Control reg */ + u32 bglr; /* ??? */ +}; + +/* The MTU that contains the timers */ +struct u8500_mtu { + u32 imsc; /* Interrupt mask set/clear */ + u32 ris; /* Raw interrupt status */ + u32 mis; /* Masked interrupt status */ + u32 icr; /* Interrupt clear register */ + struct u8500_mtu_timer pt[4]; +}; + +/* bits for the control register */ +#define MTU_CR_ONESHOT 0x01 /* if 0 = wraps reloading from BGLR */ +#define MTU_CR_32BITS 0x02 + +#define MTU_CR_PRESCALE_1 0x00 +#define MTU_CR_PRESCALE_16 0x04 +#define MTU_CR_PRESCALE_256 0x08 +#define MTU_CR_PRESCALE_MASK 0x0c + +#define MTU_CR_PERIODIC 0x40 /* if 0 = free-running */ +#define MTU_CR_ENA 0x80 + +/* + * The MTU is clocked at 133 MHz by default. (V1 and later) + */ +#define TIMER_CLOCK (133 * 1000 * 1000 / 16) +#define COUNT_TO_USEC(x) ((x) * 16 / 133) +#define USEC_TO_COUNT(x) ((x) * 133 / 16) +#define TICKS_PER_HZ (TIMER_CLOCK / CONFIG_SYS_HZ) +#define TICKS_TO_HZ(x) ((x) / TICKS_PER_HZ) +#define TIMER_LOAD_VAL 0xffffffff + +/* + * MTU timer to use (from 0 to 3). + * Linux ux500 timer0 on MTU0 and timer0 on MTU1 + */ +#define MTU_TIMER 2 + +static struct u8500_mtu_timer *timer_base = + &((struct u8500_mtu *)U8500_MTU0_BASE_V1)->pt[MTU_TIMER]; + +/* macro to read the 32 bit timer: since it decrements, we invert read value */ +#define READ_TIMER() (~readl(&timer_base->cv)) + +/* Configure a free-running, auto-wrap counter with /16 prescaler */ +int timer_init(void) +{ + writel(MTU_CR_ENA | MTU_CR_PRESCALE_16 | MTU_CR_32BITS, + &timer_base->cr); + reset_timer(); + return 0; +} + +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = TICKS_TO_HZ(READ_TIMER()); + + if (now >= gd->lastinc) /* normal (non rollover) */ + gd->tbl += (now - gd->lastinc); + else /* rollover */ + gd->tbl += (TICKS_TO_HZ(TIMER_LOAD_VAL) - gd->lastinc) + now; + gd->lastinc = now; + return gd->tbl; +} + +/* Delay x useconds */ +void __udelay(ulong usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + ulong now, last = READ_TIMER(); + + while (tmo > 0) { + now = READ_TIMER(); + if (now > last) /* normal (non rollover) */ + tmo -= now - last; + else /* rollover */ + tmo -= TIMER_LOAD_VAL - last + now; + last = now; + } +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + gd->tbl = t; +} + +void reset_timer_masked(void) +{ + gd->lastinc = TICKS_TO_HZ(READ_TIMER()); + gd->tbl = 0; /* reset ticks to 0 */ +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +/* + * Emulation of Power architecture long long timebase. + * + * TODO: Support gd->tbu for real long long timebase. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * Emulation of Power architecture timebase. + * NB: Low resolution compared to Power tbclk. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/arm/include/asm/arch-u8500/ab8500.h b/arch/arm/include/asm/arch-u8500/ab8500.h new file mode 100644 index 0000000..02a3c97 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/ab8500.h @@ -0,0 +1,523 @@ +/* + * Copyright (C) ST-Ericsson 2009. + * + * Author: Srinidhi Kasagar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef _AB8500_H +#define _AB8500_H + +/* + * AB8500 bank addresses + */ +#define AB8500_SYS_CTRL1_BLOCK 0x1 +#define AB8500_SYS_CTRL2_BLOCK 0x2 +#define AB8500_REGU_CTRL1 0x3 +#define AB8500_REGU_CTRL2 0x4 +#define AB8500_USB 0x5 +#define AB8500_TVOUT 0x6 +#define AB8500_DBI 0x7 +#define AB8500_ECI_AV_ACC 0x8 +#define AB8500_RESERVED 0x9 +#define STw4550_GPADC 0xA +#define AB8500_GPADC 0xA +#define AB8500_CHARGER 0xB +#define AB8500_GAS_GAUGE 0xC +#define AB8500_AUDIO 0xD +#define AB8500_INTERRUPT 0xE +#define AB8500_RTC 0xF +#define AB8500_MISC 0x10 +#define AB8500_DEBUG 0x12 +#define AB8500_PROD_TEST 0x13 +#define AB8500_OTP_EMUL 0x15 + +/* + * System control 1 register offsets. + * Bank = 0x01 + */ +#define AB8500_TURNON_STAT_REG 0x0100 +#define AB8500_RESET_STAT_REG 0x0101 +#define AB8500_PONKEY1_PRESS_STAT_REG 0x0102 + +#define AB8500_FSM_STAT1_REG 0x0140 +#define AB8500_FSM_STAT2_REG 0x0141 +#define AB8500_SYSCLK_REQ_STAT_REG 0x0142 +#define AB8500_USB_STAT1_REG 0x0143 +#define AB8500_USB_STAT2_REG 0x0144 +#define AB8500_STATUS_SPARE1_REG 0x0145 +#define AB8500_STATUS_SPARE2_REG 0x0146 + +#define AB8500_CTRL1_REG 0x0180 +#define AB8500_CTRL2_REG 0x0181 + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB8500_CTRL3_REG 0x0200 +#define AB8500_CTRL3_RST_DENC_MASK 0x4 +#define AB8500_CTRL3_RST_DENC_SHIFT 2 +#define AB8500_CTRL3_RST_AUD_MASK 0x2 +#define AB8500_CTRL3_RST_AUD_SHIFT 1 +#define AB8500_MAIN_WDOG_CTRL_REG 0x0201 +#define AB8500_MAIN_WDOG_TIMER_REG 0x0202 +#define AB8500_LOW_BAT_REG 0x0203 +#define AB8500_BATT_OK_REG 0x0204 +#define AB8500_SYSCLK_TIMER_REG 0x0205 +#define AB8500_SMPSCLK_CTRL_REG 0x0206 +#define AB8500_SMPSCLK_SEL1_REG 0x0207 +#define AB8500_SMPSCLK_SEL2_REG 0x0208 +#define AB8500_SMPSCLK_SEL3_REG 0x0209 +#define AB8500_SYSULPCLK_CONF_REG 0x020A +#define AB8500_SYSULPCLK_CTRL1_REG 0x020B +#define AB8500_SYSCLK_CTRL_REG 0x020C +#define AB8500_SYSCLK_REQ1_VALID_REG 0x020D +#define AB8500_SYSCLK_REQ_VALID_REG 0x020E +#define AB8500_SYSCTRL_SPARE_REG 0x020F +#define AB8500_PAD_CONF_REG 0x0210 + +/* + * Regu control1 register offsets (SPI) + * Bank = 0x03 + */ +#define AB8500_REGU_SERIAL_CTRL1_REG 0x0300 +#define AB8500_REGU_SERIAL_CTRL2_REG 0x0301 +#define AB8500_REGU_SERIAL_CTRL3_REG 0x0302 +#define AB8500_REGU_REQ_CTRL1_REG 0x0303 +#define AB8500_REGU_REQ_CTRL2_REG 0x0304 +#define AB8500_REGU_REQ_CTRL3_REG 0x0305 +#define AB8500_REGU_REQ_CTRL4_REG 0x0306 +#define AB8500_REGU_SYSCLK_REQ1HP_VALID1_REG 0x0307 +#define AB8500_REGU_SYSCLK_REQ1HP_VALID2_REG 0x0308 +#define AB8500_REGU_HWHPREQ1_VALID1_REG 0x0309 +#define AB8500_REGU_HWHPREQ1_VALID2_REG 0x030A +#define AB8500_REGU_HWHPREQ2_VALID1_REG 0x030B +#define AB8500_REGU_HWHPREQ2_VALID2_REG 0x030C +#define AB8500_REGU_SWHPREQ_VALID1_REG 0x030D +#define AB8500_REGU_SWHPREQ_VALID2_REG 0x030E + +#define AB8500_REGU_SYSCLK_REQ1_VALID_REG 0x030F /* only for ED*/ +#define AB8500_REGU_SYSCLK_REQ2_VALID_REG 0x0310 /*only for ED*/ + +#define AB8500_REGU_MISC1_REG 0x0380 +#define AB8500_REGU_OTGSUPPLY_CTRL_REG 0x0381 +#define AB8500_REGU_VUSB_CTRL_REG 0x0382 /* see reg manaul*/ +#define AB8500_REGU_VAUDIO_SUPPLY_REG 0x0383 +#define AB8500_REGU_CTRL1_SPARE_REG 0x0384 + + /* + * Regu control2 register offsets (SPI/APE I2C) + * Bank = 0x04 + */ +#define AB8500_REGU_ARM_REGU1_REG 0x0400 +#define AB8500_REGU_ARM_REGU2_REG 0x0401 +#define AB8500_REGU_VAPE_REGU_REG 0x0402 +#define AB8500_REGU_VSMPS1_REGU_REG 0x0403 +#define AB8500_REGU_VSMPS2_REGU_REG 0x0404 +#define AB8500_REGU_VSMPS3_REGU_REG 0x0405 +#define AB8500_REGU_VPLLVANA_REGU_REG 0x0406 +#define AB8500_REGU_VREF_DDR_REG 0x0407 +#define AB8500_REGU_EXTSUPPLY_REGU_REG 0x0408 +#define AB8500_REGU_VAUX12_REGU_REG 0x0409 +#define AB8500_REGU_VAUX12_REGU_VAUX1_MASK 0x3 +#define AB8500_REGU_VAUX12_REGU_VAUX1_SHIFT 0 +#define AB8500_REGU_VAUX12_REGU_VAUX1_FORCE_HP 0x1 +#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A +#define AB8500_REGU_VARM_SEL1_REG 0x040B +#define AB8500_REGU_VARM_SEL2_REG 0x040C +#define AB8500_REGU_VARM_SEL3_REG 0x040D +#define AB8500_REGU_VAPE_SEL1_REG 0x040E +#define AB8500_REGU_VAPE_SEL2_REG 0x040F +#define AB8500_REGU_VAPE_SEL3_REG 0x0410 +#define AB8500_REGU_VBB_SEL2_REG 0x0412 +#define AB8500_REGU_VSMPS1_SEL1_REG 0x0413 +#define AB8500_REGU_VSMPS1_SEL2_REG 0x0414 +#define AB8500_REGU_VSMPS1_SEL3_REG 0x0415 +#define AB8500_REGU_VSMPS2_SEL1_REG 0x0417 +#define AB8500_REGU_VSMPS2_SEL2_REG 0x0418 +#define AB8500_REGU_VSMPS2_SEL3_REG 0x0419 +#define AB8500_REGU_VSMPS3_SEL1_REG 0x041B +#define AB8500_REGU_VSMPS3_SEL2_REG 0x041C +#define AB8500_REGU_VSMPS3_SEL3_REG 0x041D +#define AB8500_REGU_VAUX1_SEL_REG 0x041F +#define AB8500_REGU_VAUX1_SEL_MASK 0xf +#define AB8500_REGU_VAUX1_SEL_SHIFT 0 +#define AB8500_REGU_VAUX1_SEL_1_5V 0x4 +#define AB8500_REGU_VAUX1_SEL_2_5V 0x8 +#define AB8500_REGU_VAUX2_SEL_REG 0x0420 +#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 +#define AB8500_REGU_CTRL2_SPARE_REG 0x0422 + +/* + * Regu control2 Vmod register offsets + */ +#define AB8500_REGU_VMOD_REGU_REG 0x0440 +#define AB8500_REGU_VMOD_SEL1_REG 0x0441 +#define AB8500_REGU_VMOD_SEL2_REG 0x0442 +#define AB8500_REGU_CTRL_DISCH_REG 0x0443 +#define AB8500_REGU_CTRL_DISCH2_REG 0x0444 + +/* + * Sim control register offsets + * Bank:0x4 + */ +#define AB8500_SIM_REG1_SGR1L_REG 0x0480 +#define AB8500_SIM_REG1_SGR1U_REG 0x0481 +#define AB8500_SIM_REG2_SCR1L_REG 0x0482 +#define AB8500_SIM_REG2_SCR1U_REG 0x0483 +#define AB8500_SIM_REG3_SCTRLRL_REG 0x0484 +#define AB8500_SIM_REG3_SCTRLRU_REG 0x0485 +#define AB8500_SIM_ISOUICCINT_SRC_REG 0x0486 +#define AB8500_SIM_ISOUICCINT_LATCH_REG 0x0487 +#define AB8500_SIM_ISOUICCINT_MASK_REG 0x0488 +#define AB8500_SIM_REG4_USBUICC_REG 0x0489 +#define AB8500_SIM_SDELAYSEL_REG 0x048A +#define AB8500_SIM_USBUICC_CTRL 0x048B /* bit 3 only for ED */ + +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB8500_USB_LINE_STAT_REG 0x0580 +#define AB8500_USB_LINE_CTRL1_REG 0x0581 +#define AB8500_USB_LINE_CTRL2_REG 0x0582 +#define AB8500_USB_LINE_CTRL3_REG 0x0583 +#define AB8500_USB_LINE_CTRL4_REG 0x0584 +#define AB8500_USB_LINE_CTRL5_REG 0x0585 +#define AB8500_USB_OTG_CTRL_REG 0x0587 +#define AB8500_USB_OTG_STAT_REG 0x0588 +#define AB8500_USB_OTG_STAT_REG 0x0588 +#define AB8500_USB_CTRL_SPARE_REG 0x0589 +#define AB8500_USB_PHY_CTRL_REG 0x058A /*only in Cut1.0*/ + +/* + * TVOUT / CTRL register offsets + * Bank : 0x06 + */ +#define AB8500_DENC_CONF0_REG 0x0600 +#define AB8500_DENC_CONF1_REG 0x0601 +#define AB8500_DENC_CONF2_REG 0x0602 +#define AB8500_DENC_CONF3_REG 0x0603 +#define AB8500_DENC_CONF4_REG 0x0604 +#define AB8500_DENC_CONF5_REG 0x0605 +#define AB8500_DENC_CONF6_REG 0x0606 +#define AB8500_DENC_CONF6_SOFT_RST_MASK 0x80 +#define AB8500_DENC_CONF6_SOFT_RST_SHIFT 7 +#define AB8500_DENC_CONF6_SOFT_RST_OFF 0x0 +#define AB8500_DENC_CONF6_SOFT_RST_ON 0x1 +#define AB8500_DENC_CONF7_REG 0x0607 +#define AB8500_DENC_CONF8_REG 0x0608 +#define AB8500_TVOUT_CTRL_REG 0x0680 +#define AB8500_TVOUT_CTRL2_REG 0x0681 +/* + * DBI register offsets + * Bank : 0x07 + */ +#define AB8500_DBI_REG1_REG 0x0700 +#define AB8500_DBI_REG2_REG 0x0701 +/* + * ECI regsiter offsets + * Bank : 0x08 + */ +#define AB8500_ECI_CTRL_REG 0x0800 +#define AB8500_ECI_HOOKLEVEL_REG 0x0801 +#define AB8500_ECI_DATAOUT_REG 0x0802 +#define AB8500_ECI_DATAIN_REG 0x0803 +/* + * AV Connector register offsets + * Bank : 0x08 + */ +#define AB8500_AV_CONN_REG 0x0840 +/* + * Accessory detection register offsets + * Bank : 0x08 + */ +#define AB8500_ACC_DET_DB1_REG 0x0880 +#define AB8500_ACC_DET_DB2_REG 0x0881 +/* + * GPADC register offsets + * Bank : 0x0A + */ +#define AB8500_GPADC_CTRL1_REG 0x0A00 +#define AB8500_GPADC_CTRL2_REG 0x0A01 +#define AB8500_GPADC_CTRL3_REG 0x0A02 +#define AB8500_GPADC_AUTO_TIMER_REG 0x0A03 +#define AB8500_GPADC_STAT_REG 0x0A04 +#define AB8500_GPADC_MANDATAL_REG 0x0A05 +#define AB8500_GPADC_MANDATAH_REG 0x0A06 +#define AB8500_GPADC_AUTODATAL_REG 0x0A07 +#define AB8500_GPADC_AUTODATAH_REG 0x0A08 +#define AB8500_GPADC_MUX_CTRL_REG 0x0A09 +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_STATUS1_REG 0x0B00 +#define AB8500_CH_STATUS2_REG 0x0B01 +#define AB8500_CH_USBCH_STAT1_REG 0x0B02 +#define AB8500_CH_USBCH_STAT2_REG 0x0B03 +#define AB8500_CH_FSM_STAT_REG 0x0B04 +#define AB8500_CH_STAT_REG 0x0B05 +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_VOLT_LVL_REG 0x0B40 +#define AB8500_CH_VOLT_LVL_MAX_REG 0x0B41 /*Only in Cut1.0*/ +#define AB8500_CH_OPT_CRNTLVL_REG 0x0B42 /*Only in Cut1.0*/ +#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x0B43 /*Only in Cut1.0*/ +#define AB8500_CH_WD_TIMER_REG 0x0B44 /*Only in Cut1.0*/ +#define AB8500_CH_WD_CTRL_REG 0x0B45 /*Only in Cut1.0*/ +#define AB8500_CHARG_WD_CTRL 0x0B51 +#define AB8500_LED_INDICATOR_PWM_CTRL 0x0B53 +#define AB8500_LED_INDICATOR_PWM_DUTY 0x0B54 +#define AB8500_BATT_OVV 0x0B55 +/* + * Charger / main control register offfsets + * Bank : 0x0B + */ +#define AB8500_MCH_CTRL1 0x0B80 +#define AB8500_MCH_CTRL2 0x0B81 +#define AB8500_MCH_IPT_CURLVL_REG 0x0B82 +#define AB8500_CH_WD_REG 0x0B83 +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB8500_USBCH_CTRL1_REG 0x0BC0 +#define AB8500_USBCH_CTRL2_REG 0x0BC1 +#define AB8500_USBCH_IPT_CRNTLVL_REG 0x0BC2 +/* + * Gas Gauge register offsets + * Bank : 0x0C + */ +#define AB8500_GASG_CC_CTRL_REG 0x0C00 +#define AB8500_GASG_CC_ACCU1_REG 0x0C01 +#define AB8500_GASG_CC_ACCU2_REG 0x0C02 +#define AB8500_GASG_CC_ACCU3_REG 0x0C03 +#define AB8500_GASG_CC_ACCU4_REG 0x0C04 +#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x0C05 +#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x0C06 +#define AB8500_GASG_CC_SMPL_CNVL_REG 0x0C07 +#define AB8500_GASG_CC_SMPL_CNVH_REG 0x0C08 +#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x0C09 +#define AB8500_GASG_CC_OFFSET_REG 0x0C0A +#define AB8500_GASG_CC_NCOV_ACCU 0x0C10 +#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x0C11 +#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x0C12 +#define AB8500_GASG_CC_NCOV_ACCU_MED 0x0C13 +#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x0C14 + + + +/* + * Audio + * Bank : 0x0D + * Should be part of Audio codec driver + */ +#define AB8500_AUDIO_POWER_UP 0x0D00 +#define AB8500_AUDIO_ANA_CONF4 0x0D08 +#define AB8500_AUDIO_DA_PATH_CONF 0x0D09 +#define AB8500_AUDIO_PWM_GEN_CONF1 0x0D0F +#define AB8500_AUDIO_PWM_GEN_CONF2 0x0D10 +#define AB8500_AUDIO_PWM_GEN_CONF3 0x0D11 +#define AB8500_AUDIO_PWM_GEN_CONF4 0x0D12 +#define AB8500_AUDIO_PWM_GEN_CONF5 0x0D13 + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE1_REG 0x0E00 +#define AB8500_IT_SOURCE2_REG 0x0E01 +#define AB8500_IT_SOURCE3_REG 0x0E02 +#define AB8500_IT_SOURCE4_REG 0x0E03 +#define AB8500_IT_SOURCE5_REG 0x0E04 +#define AB8500_IT_SOURCE6_REG 0x0E05 + +/* available only in 1.0 */ +#define AB8500_IT_SOURCE7_REG 0x0E06 +#define AB8500_IT_SOURCE8_REG 0x0E07 +#define AB8500_IT_SOURCE19_REG 0x0E12 + +#define AB8500_IT_SOURCE20_REG 0x0E13 +#define AB8500_IT_SOURCE21_REG 0x0E14 +#define AB8500_IT_SOURCE22_REG 0x0E15 +#define AB8500_IT_SOURCE23_REG 0x0E16 +#define AB8500_IT_SOURCE24_REG 0x0E17 + +/* + * latch registers + */ +#define AB8500_IT_LATCH1_REG 0x0E20 +#define AB8500_IT_LATCH2_REG 0x0E21 +#define AB8500_IT_LATCH3_REG 0x0E22 +#define AB8500_IT_LATCH4_REG 0x0E23 +#define AB8500_IT_LATCH5_REG 0x0E24 +#define AB8500_IT_LATCH6_REG 0x0E25 + +/* available only in 1.0 */ +#define AB8500_IT_LATCH7_REG 0x0E26 +#define AB8500_IT_LATCH8_REG 0x0E27 +#define AB8500_IT_LATCH9_REG 0x0E28 +#define AB8500_IT_LATCH10_REG 0x0E29 +#define AB8500_IT_LATCH19_REG 0x0E32 + +#define AB8500_IT_LATCH20_REG 0x0E33 +#define AB8500_IT_LATCH21_REG 0x0E34 +#define AB8500_IT_LATCH22_REG 0x0E35 +#define AB8500_IT_LATCH23_REG 0x0E36 +#define AB8500_IT_LATCH24_REG 0x0E37 + +/* + * mask registers + */ + +#define AB8500_IT_MASK1_REG 0x0E40 +#define AB8500_IT_MASK2_REG 0x0E41 +#define AB8500_IT_MASK3_REG 0x0E42 +#define AB8500_IT_MASK4_REG 0x0E43 +#define AB8500_IT_MASK5_REG 0x0E44 +#define AB8500_IT_MASK6_REG 0x0E45 + + +/* available only in 1.0 */ +#define AB8500_IT_MASK7_REG 0x0E46 +#define AB8500_IT_MASK8_REG 0x0E47 +#define AB8500_IT_MASK9_REG 0x0E48 +#define AB8500_IT_MASK10_REG 0x0E49 +#define AB8500_IT_MASK11_REG 0x0E4A +#define AB8500_IT_MASK12_REG 0x0E4B +#define AB8500_IT_MASK13_REG 0x0E4C +#define AB8500_IT_MASK14_REG 0x0E4D +#define AB8500_IT_MASK15_REG 0x0E4E +#define AB8500_IT_MASK16_REG 0x0E4F +#define AB8500_IT_MASK17_REG 0x0E50 +#define AB8500_IT_MASK18_REG 0x0E51 +#define AB8500_IT_MASK19_REG 0x0E52 + +#define AB8500_IT_MASK20_REG 0x0E53 +#define AB8500_IT_MASK21_REG 0x0E54 +#define AB8500_IT_MASK22_REG 0x0E55 +#define AB8500_IT_MASK23_REG 0x0E56 +#define AB8500_IT_MASK24_REG 0x0E57 + +/* + * RTC bank register offsets + * Bank : 0xF + */ +#define AB8500_RTC_SWITCHOFF_STAT_REG 0x0F00 +#define AB8500_RTC_CC_CONF_REG 0x0F01 +#define AB8500_RTC_READ_REQ_REG 0x0F02 +#define AB8500_RTC_WATCH_TSECMID_REG 0x0F03 +#define AB8500_RTC_WATCH_TSECHI_REG 0x0F04 +#define AB8500_RTC_WATCH_TMIN_LOW_REG 0x0F05 +#define AB8500_RTC_WATCH_TMIN_MID_REG 0x0F06 +#define AB8500_RTC_WATCH_TMIN_HI_REG 0x0F07 +#define AB8500_RTC_ALRM_MIN_LOW_REG 0x0F08 +#define AB8500_RTC_ALRM_MIN_MID_REG 0x0F09 +#define AB8500_RTC_ALRM_MIN_HI_REG 0x0F0A +#define AB8500_RTC_STAT_REG 0x0F0B +#define AB8500_RTC_BKUP_CHG_REG 0x0F0C +#define AB8500_RTC_FORCE_BKUP_REG 0x0F0D +#define AB8500_RTC_CALIB_REG 0x0F0E +#define AB8500_RTC_SWITCH_STAT_REG 0x0F0F + +/* + * Misc block GPIO register offsets - Not for ED + * Bank : 0x10 + */ +/* available only in 1.0 */ +#define AB8500_GPIO_SEL1_REG 0x01000 +#define AB8500_GPIO_SEL2_REG 0x01001 +#define AB8500_GPIO_SEL3_REG 0x01002 +#define AB8500_GPIO_SEL4_REG 0x01003 +#define AB8500_GPIO_SEL5_REG 0x01004 +#define AB8500_GPIO_SEL6_REG 0x01005 +#define AB8500_GPIO_DIR1_REG 0x01010 +#define AB8500_GPIO_DIR2_REG 0x01011 +#define AB8500_GPIO_DIR3_REG 0x01012 +#define AB8500_GPIO_DIR4_REG 0x01013 +#define AB8500_GPIO_DIR5_REG 0x01014 +#define AB8500_GPIO_DIR6_REG 0x01015 + +#define AB8500_GPIO_OUT1_REG 0x01020 +#define AB8500_GPIO_OUT2_REG 0x01021 +#define AB8500_GPIO_OUT3_REG 0x01022 +#define AB8500_GPIO_OUT4_REG 0x01023 +#define AB8500_GPIO_OUT5_REG 0x01024 +#define AB8500_GPIO_OUT6_REG 0x01025 + +#define AB8500_GPIO_PUD1_REG 0x01030 +#define AB8500_GPIO_PUD2_REG 0x01031 +#define AB8500_GPIO_PUD3_REG 0x01032 +#define AB8500_GPIO_PUD4_REG 0x01033 +#define AB8500_GPIO_PUD5_REG 0x01034 +#define AB8500_GPIO_PUD6_REG 0x01035 + +#define AB8500_GPIO_IN1_REG 0x01040 +#define AB8500_GPIO_IN2_REG 0x01041 +#define AB8500_GPIO_IN3_REG 0x01042 +#define AB8500_GPIO_IN4_REG 0x01043 +#define AB8500_GPIO_IN5_REG 0x01044 +#define AB8500_GPIO_IN6_REG 0x01045 +#define AB8500_GPIO_ALT_FUNC 0x01050 + +/* + * PWM Out generators + * Bank: 0x10 + */ +#define AB8500_PWM_OUT_CTRL1_REG 0x1060 +#define AB8500_PWM_OUT_CTRL2_REG 0x1061 +#define AB8500_PWM_OUT_CTRL3_REG 0x1062 +#define AB8500_PWM_OUT_CTRL4_REG 0x1063 +#define AB8500_PWM_OUT_CTRL5_REG 0x1064 +#define AB8500_PWM_OUT_CTRL6_REG 0x1065 +#define AB8500_PWM_OUT_CTRL7_REG 0x1066 + +#define AB8500_I2C_PAD_CTRL_REG 0x1067 +#define AB8500_REV_REG 0x1080 + +/* + * Misc, Debug Test Configuration register + * Bank : 0x11 + */ +#define AB8500_DEBUG_TESTMODE_REG 0x01100 + +/* only in 1.0 */ +#define AB8500_I2C_TRIG1_ADR_REG 0x1101 +#define AB8500_I2C_TRIG1_ID_REG 0x1102 +#define AB8500_I2C_TRIG2_ADR_REG 0x1103 +#define AB8500_I2C_TRIG3_ID_REG 0x1104 +#define AB8500_I2C_NOACCESS_SUP_REG 0x1105 + +/* Offsets in TurnOnstatus register + */ + +#define AB8500_MAX_INT 192 +#define AB8500_MAX_FUTURE_USE 105 + +#define AB8500_MAX_INT_SOURCE 11 +#define AB8500_MAX_INT_LATCH 13 +#define AB8500_MAX_INT_MASK 21 + +#define ab8500_read prcmu_i2c_read +#define ab8500_write prcmu_i2c_write + +extern int prcmu_i2c_read(u8 reg, u16 slave); +extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data); + +#endif /* AB8500_H_ */ diff --git a/arch/arm/include/asm/arch-u8500/bits.h b/arch/arm/include/asm/arch-u8500/bits.h new file mode 100644 index 0000000..17e2f09 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/bits.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __bits_h +#define __bits_h 1 + +#define BIT0 (1<<0) +#define BIT1 (1<<1) +#define BIT2 (1<<2) +#define BIT3 (1<<3) +#define BIT4 (1<<4) +#define BIT5 (1<<5) +#define BIT6 (1<<6) +#define BIT7 (1<<7) +#define BIT8 (1<<8) +#define BIT9 (1<<9) +#define BIT10 (1<<10) +#define BIT11 (1<<11) +#define BIT12 (1<<12) +#define BIT13 (1<<13) +#define BIT14 (1<<14) +#define BIT15 (1<<15) +#define BIT16 (1<<16) +#define BIT17 (1<<17) +#define BIT18 (1<<18) +#define BIT19 (1<<19) +#define BIT20 (1<<20) +#define BIT21 (1<<21) +#define BIT22 (1<<22) +#define BIT23 (1<<23) +#define BIT24 (1<<24) +#define BIT25 (1<<25) +#define BIT26 (1<<26) +#define BIT27 (1<<27) +#define BIT28 (1<<28) +#define BIT29 (1<<29) +#define BIT30 (1<<30) +#define BIT31 (1<<31) + +#endif diff --git a/arch/arm/include/asm/arch-u8500/clock.h b/arch/arm/include/asm/arch-u8500/clock.h new file mode 100644 index 0000000..b00ab0d --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/clock.h @@ -0,0 +1,72 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_CLOCK +#define __ASM_ARCH_CLOCK + +struct prcmu { + unsigned int armclkfix_mgt; + unsigned int armclk_mgt; + unsigned int svammdspclk_mgt; + unsigned int siammdspclk_mgt; + unsigned int reserved; + unsigned int sgaclk_mgt; + unsigned int uartclk_mgt; + unsigned int msp02clk_mgt; + unsigned int i2cclk_mgt; + unsigned int sdmmcclk_mgt; + unsigned int slimclk_mgt; + unsigned int per1clk_mgt; + unsigned int per2clk_mgt; + unsigned int per3clk_mgt; + unsigned int per5clk_mgt; + unsigned int per6clk_mgt; + unsigned int per7clk_mgt; + unsigned int lcdclk_mgt; + unsigned int reserved1; + unsigned int bmlclk_mgt; + unsigned int hsitxclk_mgt; + unsigned int hsirxclk_mgt; + unsigned int hdmiclk_mgt; + unsigned int apeatclk_mgt; + unsigned int apetraceclk_mgt; + unsigned int mcdeclk_mgt; + unsigned int ipi2cclk_mgt; + unsigned int dsialtclk_mgt; + unsigned int spare2clk_mgt; + unsigned int dmaclk_mgt; + unsigned int b2r2clk_mgt; + unsigned int tvclk_mgt; + unsigned int unused[82]; + unsigned int tcr; + unsigned int unused1[23]; + unsigned int ape_softrst; +}; + +extern void u8500_clock_enable(int periph, int kern, int cluster); + +static inline void u8500_prcmu_enable(unsigned int *reg) +{ + writel(readl(reg) | (1 << 8), reg); +} + +#endif /* __ASM_ARCH_CLOCK */ diff --git a/arch/arm/include/asm/arch-u8500/common.h b/arch/arm/include/asm/arch-u8500/common.h new file mode 100644 index 0000000..ab8a4db --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/common.h @@ -0,0 +1,107 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _COMMON_H_ +#define _COMMON_H_ +#include + +#define PASS (1) +#define FAIL (0) + +#define IO(addr) (*((u32 *) (addr))) +#define HIO(addr) (*((u16 *) (addr))) +#define BIO(addr) (*((u8 *) (addr))) + +/* + * macro to get at IO space + */ +#define IO_ADDRESS(x) (x) + +#define REG_WRITE_BITS(reg, val, mask, sb) \ + (writel(((readl(reg) & ~(mask)) | (((val)<<(sb)) & (mask))), reg)) + +#define nmdk_error(format, arg...) printf(": " format "\n" , ## arg) + +/*----------------------------------------------------------------------------- + * Bit mask definition + *---------------------------------------------------------------------------*/ +#define MASK_NULL8 0x00 +#define MASK_NULL16 0x0000 +#define MASK_NULL32 0x00000000 +#define MASK_ALL8 0xFF +#define MASK_ALL16 0xFFFF +#define MASK_ALL32 0xFFFFFFFF + +#define MASK_BIT0 (1UL<<0) +#define MASK_BIT1 (1UL<<1) +#define MASK_BIT2 (1UL<<2) +#define MASK_BIT3 (1UL<<3) +#define MASK_BIT4 (1UL<<4) +#define MASK_BIT5 (1UL<<5) +#define MASK_BIT6 (1UL<<6) +#define MASK_BIT7 (1UL<<7) +#define MASK_BIT8 (1UL<<8) +#define MASK_BIT9 (1UL<<9) +#define MASK_BIT10 (1UL<<10) +#define MASK_BIT11 (1UL<<11) +#define MASK_BIT12 (1UL<<12) +#define MASK_BIT13 (1UL<<13) +#define MASK_BIT14 (1UL<<14) +#define MASK_BIT15 (1UL<<15) +#define MASK_BIT16 (1UL<<16) +#define MASK_BIT17 (1UL<<17) +#define MASK_BIT18 (1UL<<18) +#define MASK_BIT19 (1UL<<19) +#define MASK_BIT20 (1UL<<20) +#define MASK_BIT21 (1UL<<21) +#define MASK_BIT22 (1UL<<22) +#define MASK_BIT23 (1UL<<23) +#define MASK_BIT24 (1UL<<24) +#define MASK_BIT25 (1UL<<25) +#define MASK_BIT26 (1UL<<26) +#define MASK_BIT27 (1UL<<27) +#define MASK_BIT28 (1UL<<28) +#define MASK_BIT29 (1UL<<29) +#define MASK_BIT30 (1UL<<30) +#define MASK_BIT31 (1UL<<31) + +#define NOMADIK_INTERNAL_ERROR (-8) +#define NOMADIK_NOT_CONFIGURED (-7) +#define NOMADIK_REQUEST_PENDING (-6) +#define NOMADIK_REQUEST_NOT_APPLICABLE (-5) +#define NOMADIK_INVALID_PARAMETER (-4) +#define NOMADIK_UNSUPPORTED_FEATURE (-3) +#define NOMADIK_UNSUPPORTED_HW (-2) +#define NOMADIK_ERROR (-1) +#define NOMADIK_OK (0) +#define NOMADIK_INTERNAL_EVENT (1) +#define NOMADIK_REMAINING_PENDING_EVENTS (2) +#define NOMADIK_REMAINING_FILTER_PENDING_EVENTS (3) +#define NOMADIK_NO_MORE_PENDING_EVENT (4) +#define NOMADIK_NO_MORE_FILTER_PENDING_EVENT (5) +#define NOMADIK_NO_PENDING_EVENT_ERROR (7) + + +void gpio_init(void); +void arm_pl180_mmci_init(void); + + +#endif /* _COMMON_H_ */ diff --git a/arch/arm/include/asm/arch-u8500/gpio.h b/arch/arm/include/asm/arch-u8500/gpio.h new file mode 100644 index 0000000..39982a6 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/gpio.h @@ -0,0 +1,247 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _UX500_GPIO_h +#define _UX500_GPIO_h + +#include +#include +#include + +#include "common.h" +#include + +#define GPIO_TOTAL_PINS 268 + +#define GPIO_PINS_PER_BLOCK 32 +#define GPIO_BLOCKS_COUNT (GPIO_TOTAL_PINS/GPIO_PINS_PER_BLOCK + 1) +#define GPIO_BLOCK(pin) (((pin + GPIO_PINS_PER_BLOCK) >> 5) - 1) + + +struct gpio_register { + u32 gpio_dat; /* data register *//*0x000 */ + u32 gpio_dats; /* data Set register *//*0x004 */ + u32 gpio_datc; /* data Clear register *//*0x008 */ + u32 gpio_pdis; /* Pull disable register *//*0x00C */ + u32 gpio_dir; /* data direction register *//*0x010 */ + u32 gpio_dirs; /* data dir Set register *//*0x014 */ + u32 gpio_dirc; /* data dir Clear register *//*0x018 */ + u32 gpio_slpm; /* Sleep mode register *//*0x01C */ + u32 gpio_afsa; /* AltFun A Select reg *//*0x020 */ + u32 gpio_afsb; /* AltFun B Select reg *//*0x024 */ + u32 gpio_lowemi;/* low EMI Select reg *//*0x028 */ + u32 reserved_1[(0x040 - 0x02C) >> 2]; /*0x028-0x3C Reserved*/ + u32 gpio_rimsc; /* rising edge intr set/clear *//*0x040 */ + u32 gpio_fimsc; /* falling edge intr set/clear register *//*0x044 */ + u32 gpio_mis; /* masked interrupt status register *//*0x048 */ + u32 gpio_ic; /* Interrupt Clear register *//*0x04C */ + u32 gpio_rwimsc;/* Rising-edge Wakeup IMSC register *//*0x050 */ + u32 gpio_fwimsc;/* Falling-edge Wakeup IMSC register *//*0x054 */ + u32 gpio_wks; /* Wakeup Status register *//*0x058 */ +}; + +/* Error values returned by functions */ +enum gpio_error { + GPIO_OK = 0, + GPIO_UNSUPPORTED_HW = -2, /* NOMADIK_UNSUPPORTED_HW */ + GPIO_UNSUPPORTED_FEATURE = -3, /* NOMADIK_UNSUPPORTED_FEATURE */ + GPIO_INVALID_PARAMETER = -4, /* NOMADIK_INVALID_PARAMETER */ + GPIO_REQUEST_NOT_APPLICABLE = -5, /* NOMADIK_REQUEST_NOT_APPLICABLE */ + GPIO_REQUEST_PENDING = -6, /* NOMADIK_REQUEST_PENDING */ + GPIO_NOT_CONFIGURED = -7, /* NOMADIK_NOT_CONFIGURED */ + GPIO_INTERNAL_ERROR = -8, /* NOMADIK_INTERNAL_ERROR */ + GPIO_INTERNAL_EVENT = 1, /* NOMADIK_INTERNAL_EVENT */ + GPIO_REMAINING_EVENT = 2, /* NOMADIK_REMAINING_PENDING_EVENTS */ + GPIO_NO_MORE_PENDING_EVENT = 3, /* NOMADIK_NO_MORE_PENDING_EVENT */ + GPIO_INVALID_CLIENT = -25, + GPIO_INVALID_PIN = -26, + GPIO_PIN_BUSY = -27, + GPIO_PIN_NOT_ALLOCATED = -28, + GPIO_WRONG_CLIENT = -29, + GPIO_UNSUPPORTED_ALTFUNC = -30, +}; + +/*GPIO DEVICE ID */ +enum gpio_device_id { + GPIO_DEVICE_ID_0, + GPIO_DEVICE_ID_1, + GPIO_DEVICE_ID_2, + GPIO_DEVICE_ID_3, + GPIO_DEVICE_ID_INVALID +}; + +/* + * Alternate Function: + * refered in altfun_table to pointout particular altfun to be enabled + * when using GPIO_ALT_FUNCTION A/B/C enable/disable operation + */ +enum gpio_alt_function { + GPIO_ALT_UART_0_MODEM, + GPIO_ALT_UART_0_NO_MODEM, + GPIO_ALT_UART_1, + GPIO_ALT_UART_2, + GPIO_ALT_I2C_0, + GPIO_ALT_I2C_1, + GPIO_ALT_I2C_2, + GPIO_ALT_I2C_3, + GPIO_ALT_MSP_0, + GPIO_ALT_MSP_1, + GPIO_ALT_MSP_2, + GPIO_ALT_MSP_3, + GPIO_ALT_MSP_4, + GPIO_ALT_MSP_5, + GPIO_ALT_SSP_0, + GPIO_ALT_SSP_1, + GPIO_ALT_MM_CARD0, + GPIO_ALT_SD_CARD0, + GPIO_ALT_DMA_0, + GPIO_ALT_DMA_1, + GPIO_ALT_HSI0, + GPIO_ALT_CCIR656_INPUT, + GPIO_ALT_CCIR656_OUTPUT, + GPIO_ALT_LCD_PANEL, + GPIO_ALT_MDIF, + GPIO_ALT_SDRAM, + GPIO_ALT_HAMAC_AUDIO_DBG, + GPIO_ALT_HAMAC_VIDEO_DBG, + GPIO_ALT_CLOCK_RESET, + GPIO_ALT_TSP, + GPIO_ALT_IRDA, + GPIO_ALT_USB_MINIMUM, + GPIO_ALT_USB_I2C, + GPIO_ALT_OWM, + GPIO_ALT_PWL, + GPIO_ALT_FSMC, + GPIO_ALT_COMP_FLASH, + GPIO_ALT_SRAM_NOR_FLASH, + GPIO_ALT_FSMC_ADDLINE_0_TO_15, + GPIO_ALT_SCROLL_KEY, + GPIO_ALT_MSHC, + GPIO_ALT_HPI, + GPIO_ALT_USB_OTG, + GPIO_ALT_SDIO, + GPIO_ALT_HSMMC, + GPIO_ALT_FSMC_ADD_DATA_0_TO_25, + GPIO_ALT_HSI1, + GPIO_ALT_NOR, + GPIO_ALT_NAND, + GPIO_ALT_KEYPAD, + GPIO_ALT_VPIP, + GPIO_ALT_CAM, + GPIO_ALT_CCP1, + GPIO_ALT_EMMC, + GPIO_ALT_POP_EMMC, + GPIO_ALT_FUNMAX /* Add new alt func before this */ +}; + +/* Defines pin assignment(Software mode or Alternate mode) */ +enum gpio_mode { + GPIO_MODE_LEAVE_UNCHANGED, /* Parameter will be ignored */ + GPIO_MODE_SOFTWARE, /* Pin connected to GPIO (SW controlled) */ + GPIO_ALTF_A, /* Pin connected to altfunc 1 (HW periph 1) */ + GPIO_ALTF_B, /* Pin connected to altfunc 2 (HW periph 2) */ + GPIO_ALTF_C, /* Pin connected to altfunc 3 (HW periph 3) */ + GPIO_ALTF_FIND, /* Pin connected to altfunc 3 (HW periph 3) */ + GPIO_ALTF_DISABLE /* Pin connected to altfunc 3 (HW periph 3) */ +}; + +/* Defines GPIO pin direction */ +enum gpio_direction { + GPIO_DIR_LEAVE_UNCHANGED, /* Parameter will be ignored */ + GPIO_DIR_INPUT, /* GPIO set as input */ + GPIO_DIR_OUTPUT /* GPIO set as output */ +}; + +/* Interrupt trigger mode */ +enum gpio_trig { + GPIO_TRIG_LEAVE_UNCHANGED, /* Parameter will be ignored */ + GPIO_TRIG_DISABLE, /* Trigger no IT */ + GPIO_TRIG_RISING_EDGE, /* Trigger an IT on rising edge */ + GPIO_TRIG_FALLING_EDGE, /* Trigger an IT on falling edge */ + GPIO_TRIG_BOTH_EDGES, /* Trigger an IT on rising and falling edge */ + GPIO_TRIG_HIGH_LEVEL, /* Trigger an IT on high level */ + GPIO_TRIG_LOW_LEVEL /* Trigger an IT on low level */ +}; + +/* Configuration parameters for one GPIO pin.*/ +struct gpio_config { + enum gpio_mode mode; + enum gpio_direction direction; + enum gpio_trig trig; + char *dev_name; /* Who owns the gpio pin */ +}; + +/* GPIO pin data*/ +enum gpio_data { + GPIO_DATA_LOW, + GPIO_DATA_HIGH +}; + +/* GPIO behaviour in sleep mode */ +enum gpio_sleep_mode { + GPIO_SLEEP_MODE_LEAVE_UNCHANGED, /* Parameter will be ignored */ + GPIO_SLEEP_MODE_INPUT_DEFAULTVOLT, /* GPIO is an input with pull + up/down enabled when in sleep + mode. */ + GPIO_SLEEP_MODE_CONTROLLED_BY_GPIO /* GPIO pin is controlled by + GPIO IP. So mode, direction + and data values for GPIO pin + in sleep mode are determined + by configuration set to GPIO + pin before entering to sleep + mode. */ +}; + +/* GPIO ability to wake the system up from sleep mode.*/ +enum gpio_wake { + GPIO_WAKE_LEAVE_UNCHANGED, /* Parameter will be ignored */ + GPIO_WAKE_DISABLE, /* No wake of system from sleep mode. */ + GPIO_WAKE_LOW_LEVEL, /* Wake the system up on a LOW level. */ + GPIO_WAKE_HIGH_LEVEL, /* Wake the system up on a HIGH level. */ + GPIO_WAKE_RISING_EDGE, /* Wake the system up on a RISING edge. */ + GPIO_WAKE_FALLING_EDGE, /* Wake the system up on a FALLING edge. */ + GPIO_WAKE_BOTH_EDGES /* Wake the system up on both RISE and FALL. */ +}; + +/* Configuration parameters for one GPIO pin in sleep mode.*/ +struct gpio_sleep_config { + enum gpio_sleep_mode sleep_mode;/* GPIO behaviour in sleep mode. */ + enum gpio_wake wake; /* GPIO ability to wake up system. */ +}; + +extern int gpio_setpinconfig(int pin_id, struct gpio_config *pin_config); +extern int gpio_resetpinconfig(int pin_id, char *dev_name); +extern int gpio_writepin(int pin_id, enum gpio_data value, char *dev_name); +extern int gpio_readpin(int pin_id, enum gpio_data *value); +extern int gpio_altfuncenable(enum gpio_alt_function altfunc, + char *dev_name); +extern int gpio_altfuncdisable(enum gpio_alt_function altfunc, + char *dev_name); + +struct gpio_altfun_data { + u16 altfun; + u16 start; + u16 end; + u16 cont; + u8 type; +}; +#endif diff --git a/arch/arm/include/asm/arch-u8500/hardware.h b/arch/arm/include/asm/arch-u8500/hardware.h new file mode 100644 index 0000000..6bb95ec --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/hardware.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* Peripheral clusters */ + +#define U8500_PER3_BASE 0x80000000 +#define U8500_PER2_BASE 0x80110000 +#define U8500_PER1_BASE 0x80120000 +#define U8500_PER4_BASE 0x80150000 + +#define U8500_PER6_BASE 0xa03c0000 +#define U8500_PER7_BASE 0xa03d0000 +#define U8500_PER5_BASE 0xa03e0000 + +/* GPIO */ + +#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) +#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xE000 + 0x80) + +#define U8500_GPIO2_BASE (U8500_PER3_BASE + 0xE000) +#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xE000 + 0x80) +#define U8500_GPIO4_BASE (U8500_PER3_BASE + 0xE000 + 0x100) +#define U8500_GPIO5_BASE (U8500_PER3_BASE + 0xE000 + 0x180) + +#define U8500_GPIO6_BASE (U8500_PER2_BASE + 0xE000) +#define U8500_GPIO7_BASE (U8500_PER2_BASE + 0xE000 + 0x80) + +#define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000) + +/* Per7 */ +#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) + +/* Per6 */ +#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000) +#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000) +#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) + +/* Per5 */ +#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) + +/* Per4 */ +#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) + +/* Per3 */ +#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) +#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) + +/* Per2 */ +#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) + +/* Per1 */ +#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) +#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) +#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) + +/* Last page of Boot ROM */ +#define U8500_BOOTROM_BASE 0x9001f000 +#define U8500_BOOTROM_ASIC_ID_OFFSET 0x0ff4 + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-u8500/u8500.h b/arch/arm/include/asm/arch-u8500/u8500.h new file mode 100644 index 0000000..0d6dbb7 --- /dev/null +++ b/arch/arm/include/asm/arch-u8500/u8500.h @@ -0,0 +1,47 @@ +/* + * Copyright (C) ST-Ericsson SA 2009 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __U8500_H +#define __U8500_H + +/* + * base register values for U8500 + */ +#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock + Management Unit */ +#define CFG_SDRAMC_BASE 0x903CF000 /* SDRAMC cnf registers */ +#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */ + +/* + * U8500 GPIO register base for 9 banks + */ +#define U8500_GPIO_0_BASE 0x8012E000 +#define U8500_GPIO_1_BASE 0x8012E080 +#define U8500_GPIO_2_BASE 0x8000E000 +#define U8500_GPIO_3_BASE 0x8000E080 +#define U8500_GPIO_4_BASE 0x8000E100 +#define U8500_GPIO_5_BASE 0x8000E180 +#define U8500_GPIO_6_BASE 0x8011E000 +#define U8500_GPIO_7_BASE 0x8011E080 +#define U8500_GPIO_8_BASE 0xA03FE000 + +#endif /* __U8500_H */