diff mbox series

[v3,2/2] r8169: switch to device-managed functions in probe (part 2)

Message ID 20180228122112.39710-2-andriy.shevchenko@linux.intel.com
State Superseded, archived
Delegated to: David Miller
Headers show
Series [v3,1/2] r8169: Dereference MMIO address immediately before use | expand

Commit Message

Andy Shevchenko Feb. 28, 2018, 12:21 p.m. UTC 
This is a follow up to the commit

  4c45d24a759d ("r8169: switch to device-managed functions in probe")

to move towards managed resources even more.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/net/ethernet/realtek/r8169.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 14adc17df74a..b1b373ed5c67 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -8173,7 +8173,6 @@  static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	struct rtl8169_private *tp;
 	struct mii_if_info *mii;
 	struct net_device *dev;
-	void __iomem *ioaddr;
 	int chipset, i;
 	int rc;
 
@@ -8231,20 +8230,13 @@  static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
-	rc = pci_request_regions(pdev, MODULENAME);
+	rc = pcim_iomap_regions(pdev, BIT(region), MODULENAME);
 	if (rc < 0) {
-		netif_err(tp, probe, dev, "could not request regions\n");
+		netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
 		return rc;
 	}
 
-	/* ioremap MMIO region */
-	ioaddr = devm_ioremap(&pdev->dev, pci_resource_start(pdev, region),
-			      R8169_REGS_SIZE);
-	if (!ioaddr) {
-		netif_err(tp, probe, dev, "cannot remap MMIO, aborting\n");
-		return -EIO;
-	}
-	tp->mmio_addr = ioaddr;
+	tp->mmio_addr = pcim_iomap_table(pdev)[region];
 
 	if (!pci_is_pcie(pdev))
 		netif_info(tp, probe, dev, "not PCI Express\n");
@@ -8416,7 +8408,7 @@  static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pci_set_drvdata(pdev, dev);
 
 	netif_info(tp, probe, dev, "%s at 0x%p, %pM, XID %08x IRQ %d\n",
-		   rtl_chip_infos[chipset].name, ioaddr, dev->dev_addr,
+		   rtl_chip_infos[chipset].name, tp->mmio_addr, dev->dev_addr,
 		   (u32)(RTL_R32(tp, TxConfig) & 0x9cf0f8ff), pdev->irq);
 	if (rtl_chip_infos[chipset].jumbo_max != JUMBO_1K) {
 		netif_info(tp, probe, dev, "jumbo features [frames: %d bytes, "