Patchwork [U-Boot,v3,14/23] km-arm: i2c support for suenx based boards

login
register
mail settings
Submitter Heiko Schocher
Date March 21, 2011, 7:02 a.m.
Message ID <1300690939-31511-15-git-send-email-hs@denx.de>
Download mbox | patch
Permalink /patch/87693/
State Accepted
Commit 44097e26cce5b4ce4f64d15880a5a60524212ddf
Headers show

Comments

Heiko Schocher - March 21, 2011, 7:02 a.m.
This patch renames the suen3 defines and functions to KM_KIRKWOOD
which is more generic and more precise, because these values
and functions where used by all suenX boards and not only suen3.

Signed-off-by: Lukas Roggli <lukas.roggli@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>
---
Changes for v2:
  - fix checkpatch.pl errors and warnings
Changes for v3:
  - rebased only

 board/keymile/km_arm/km_arm.c |   20 ++++++++++----------
 include/configs/km_arm.h      |   18 +++++++++---------
 2 files changed, 19 insertions(+), 19 deletions(-)

Patch

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 9d0892d..9dafcef 100644
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -95,7 +95,7 @@  u32 kwmpp_config[] = {
 	MPP41_GPIO,		/* Piggy3 LED[4] */
 	MPP42_GPIO,		/* Piggy3 LED[5] */
 	MPP43_GPIO,		/* Piggy3 LED[6] */
-	MPP44_GPIO,		/* Piggy3 LED[7] */
+	MPP44_GPIO,		/* Piggy3 LED[7], BIST_EN_L */
 	MPP45_GPIO,		/* Piggy3 LED[8] */
 	MPP46_GPIO,		/* Reserved */
 	MPP47_GPIO,		/* Reserved */
@@ -161,14 +161,14 @@  int board_early_init_f(void)
 
 #if defined(CONFIG_SOFT_I2C)
 	/* init the GPIO for I2C Bitbang driver */
-	kw_gpio_set_valid(SUEN3_SDA_PIN, 1);
-	kw_gpio_set_valid(SUEN3_SCL_PIN, 1);
-	kw_gpio_direction_output(SUEN3_SDA_PIN, 0);
-	kw_gpio_direction_output(SUEN3_SCL_PIN, 0);
+	kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1);
+	kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1);
+	kw_gpio_direction_output(KM_KIRKWOOD_SDA_PIN, 0);
+	kw_gpio_direction_output(KM_KIRKWOOD_SCL_PIN, 0);
 #endif
 #if defined(CONFIG_SYS_EEPROM_WREN)
-	kw_gpio_set_valid(SUEN3_ENV_WP, 38);
-	kw_gpio_direction_output(SUEN3_ENV_WP, 1);
+	kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38);
+	kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1);
 #endif
 
 	return 0;
@@ -321,15 +321,15 @@  int get_sda(void)
 
 int get_scl(void)
 {
-	return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
+	return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0;
 }
 #endif
 
 #if defined(CONFIG_SYS_EEPROM_WREN)
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
-	kw_gpio_set_value(SUEN3_ENV_WP, !state);
+	kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state);
 
-	return !kw_gpio_get_value(SUEN3_ENV_WP);
+	return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP);
 }
 #endif
diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index 2e38c12..5fa0153 100644
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -179,15 +179,15 @@  void set_sda (int state);
 void set_scl (int state);
 int get_sda (void);
 int get_scl (void);
-#define SUEN3_SDA_PIN	8
-#define SUEN3_SCL_PIN	9
-#define SUEN3_ENV_WP	38
-
-#define I2C_ACTIVE	__set_direction(SUEN3_SDA_PIN, 0)
-#define I2C_TRISTATE	__set_direction(SUEN3_SDA_PIN, 1)
-#define I2C_READ	(kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit)	kw_gpio_set_value(SUEN3_SDA_PIN, bit);
-#define I2C_SCL(bit)	kw_gpio_set_value(SUEN3_SCL_PIN, bit);
+#define KM_KIRKWOOD_SDA_PIN	8
+#define KM_KIRKWOOD_SCL_PIN	9
+#define KM_KIRKWOOD_ENV_WP	38
+
+#define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
+#define I2C_TRISTATE	__set_direction(KM_KIRKWOOD_SDA_PIN, 1)
+#define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
+#define I2C_SDA(bit)	kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
+#define I2C_SCL(bit)	kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 #endif
 
 #define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */