diff mbox series

[PULL,01/20] hw/arm/aspeed: directly map the serial device to the system address space

Message ID 20180215183700.26101-2-peter.maydell@linaro.org
State New
Headers show
Series [PULL,01/20] hw/arm/aspeed: directly map the serial device to the system address space | expand

Commit Message

Peter Maydell Feb. 15, 2018, 6:36 p.m. UTC 
From: Philippe Mathieu-Daudé <f4bug@amsat.org>

(qemu) info mtree
 address-space: cpu-memory-0
   0000000000000000-ffffffffffffffff (prio 0, i/o): system
     0000000000000000-0000000007ffffff (prio 0, rom): aspeed.boot_rom
     000000001e600000-000000001e7fffff (prio -1, i/o): aspeed_soc.io
-      000000001e784000-000000001e78401f (prio 0, i/o): serial
     000000001e620000-000000001e6200ff (prio 0, i/o): aspeed.smc.ast2500-fmc
     000000001e630000-000000001e6300ff (prio 0, i/o): aspeed.smc.ast2500-spi1
     [...]
     000000001e720000-000000001e728fff (prio 0, ram): aspeed.sram
     000000001e782000-000000001e782fff (prio 0, i/o): aspeed.timer
+    000000001e784000-000000001e78401f (prio 0, i/o): serial
     000000001e785000-000000001e78501f (prio 0, i/o): aspeed.wdt
     000000001e785020-000000001e78503f (prio 0, i/o): aspeed.wdt

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 20180209085755.30414-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/arm/aspeed_soc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index c83b7e207b..2a5d041b3b 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -257,7 +257,8 @@  static void aspeed_soc_realize(DeviceState *dev, Error **errp)
     /* UART - attach an 8250 to the IO space as our UART5 */
     if (serial_hds[0]) {
         qemu_irq uart5 = qdev_get_gpio_in(DEVICE(&s->vic), uart_irqs[4]);
-        serial_mm_init(&s->iomem, ASPEED_SOC_UART_5_BASE, 2,
+        serial_mm_init(get_system_memory(),
+                       ASPEED_SOC_IOMEM_BASE + ASPEED_SOC_UART_5_BASE, 2,
                        uart5, 38400, serial_hds[0], DEVICE_LITTLE_ENDIAN);
     }