[v2] PCI: qcom: add missing supplies required for msm8996

Message ID 20180214120616.23428-1-srinivas.kandagatla@linaro.org
State Superseded
Headers show
Series
  • [v2] PCI: qcom: add missing supplies required for msm8996
Related show

Commit Message

Srinivas Kandagatla Feb. 14, 2018, 12:06 p.m.
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

This patch adds supplies that are required for msm8996. vdda
is analog supply that go in to controller, and vddpe_3v3 is
supply to PCIe endpoint.

Without these supplies PCIe endpoints which require power supplies are
not enumerated at all, as there is no one to power it up.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
Changes since v1:
	- specify only one vddpe as suggested by Stan

 .../devicetree/bindings/pci/qcom,pcie.txt          |  4 ++++
 drivers/pci/dwc/pcie-qcom.c                        | 24 ++++++++++++++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

Comments

Stanimir Varbanov Feb. 14, 2018, 4 p.m. | #1
Hi Srini,

Thanks for the patch!

On 02/14/2018 02:06 PM, srinivas.kandagatla@linaro.org wrote:
> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> 
> This patch adds supplies that are required for msm8996. vdda
> is analog supply that go in to controller, and vddpe_3v3 is
> supply to PCIe endpoint.
> 
> Without these supplies PCIe endpoints which require power supplies are
> not enumerated at all, as there is no one to power it up.
> 
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
> ---
> Changes since v1:
> 	- specify only one vddpe as suggested by Stan
> 
>  .../devicetree/bindings/pci/qcom,pcie.txt          |  4 ++++
>  drivers/pci/dwc/pcie-qcom.c                        | 24 ++++++++++++++++++++--
>  2 files changed, 26 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> index 3c9d321b3d3b..1fd703bd73e0 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
> @@ -189,6 +189,10 @@
>  	Value type: <phandle>
>  	Definition: A phandle to the analog power supply for IC which generates
>  		    reference clock
> +- vddpe-3v3-supply:

shouldn't it be vddpe_3v3-supply to be aligned with the other supplies?

> +	Usage: optional
> +	Value type: <phandle>
> +	Definition: A phandle to the PCIe endpoint power supply
>  
>  - phys:
>  	Usage: required for apq8084
> diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
> index 3e89909f8cb9..519a2ae416eb 100644
> --- a/drivers/pci/dwc/pcie-qcom.c
> +++ b/drivers/pci/dwc/pcie-qcom.c
> @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 {
>  	struct reset_control *core;
>  	struct regulator *vdda;
>  };
> -

please keep above blank line.

> +#define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
>  struct qcom_pcie_resources_2_3_2 {
>  	struct clk *aux_clk;
>  	struct clk *master_clk;
>  	struct clk *slave_clk;
>  	struct clk *cfg_clk;
>  	struct clk *pipe_clk;
> +	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
>  };
>  
>  struct qcom_pcie_resources_2_4_0 {
> @@ -521,6 +522,14 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
>  	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
>  	struct dw_pcie *pci = pcie->pci;
>  	struct device *dev = pci->dev;
> +	int ret;
> +
> +	res->supplies[0].supply = "vdda";
> +	res->supplies[1].supply = "vddpe-3v3";
> +	ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY,
> +				      res->supplies);
> +	if (ret)
> +		return ret;
>  
>  	res->aux_clk = devm_clk_get(dev, "aux");
>  	if (IS_ERR(res->aux_clk))
> @@ -550,6 +559,8 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
>  	clk_disable_unprepare(res->master_clk);
>  	clk_disable_unprepare(res->cfg_clk);
>  	clk_disable_unprepare(res->aux_clk);
> +
> +	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
>  }
>  
>  static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
> @@ -567,10 +578,16 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
>  	u32 val;
>  	int ret;
>  
> +	ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> +	if (ret < 0) {
> +		dev_err(dev, "cannot enable regulators\n");
> +		return ret;
> +	}
> +
>  	ret = clk_prepare_enable(res->aux_clk);
>  	if (ret) {
>  		dev_err(dev, "cannot prepare/enable aux clock\n");
> -		return ret;
> +		goto err_aux_clk;
>  	}
>  
>  	ret = clk_prepare_enable(res->cfg_clk);
> @@ -621,6 +638,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
>  err_cfg_clk:
>  	clk_disable_unprepare(res->aux_clk);
>  
> +err_aux_clk:
> +	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
> +
>  	return ret;
>  }
>  
>
Srinivas Kandagatla Feb. 14, 2018, 4:14 p.m. | #2
On 14/02/18 16:00, Stanimir Varbanov wrote:
>>   .../devicetree/bindings/pci/qcom,pcie.txt          |  4 ++++
>>   drivers/pci/dwc/pcie-qcom.c                        | 24 ++++++++++++++++++++--
>>   2 files changed, 26 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> index 3c9d321b3d3b..1fd703bd73e0 100644
>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>> @@ -189,6 +189,10 @@
>>   	Value type: <phandle>
>>   	Definition: A phandle to the analog power supply for IC which generates
>>   		    reference clock
>> +- vddpe-3v3-supply:
> shouldn't it be vddpe_3v3-supply to be aligned with the other supplies?
> 
I noticed that, I had to do it intentionally
As dt properties should follow - instead of _


>> +	Usage: optional
>> +	Value type: <phandle>
>> +	Definition: A phandle to the PCIe endpoint power supply
>>   
>>   - phys:
>>   	Usage: required for apq8084
>> diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
>> index 3e89909f8cb9..519a2ae416eb 100644
>> --- a/drivers/pci/dwc/pcie-qcom.c
>> +++ b/drivers/pci/dwc/pcie-qcom.c
>> @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 {
>>   	struct reset_control *core;
>>   	struct regulator *vdda;
>>   };
>> -
> please keep above blank line.
Will fix it.
> 
>> +#define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
>>   struct qcom_pcie_resources_2_3_2 {
>>   	struct clk *aux_clk;
>>   	struct clk *master_clk;
>>   	struct clk *slave_clk;
>>   	struct clk *cfg_clk;
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stanimir Varbanov Feb. 14, 2018, 4:38 p.m. | #3
On 02/14/2018 06:14 PM, Srinivas Kandagatla wrote:
> 
> 
> On 14/02/18 16:00, Stanimir Varbanov wrote:
>>>   .../devicetree/bindings/pci/qcom,pcie.txt          |  4 ++++
>>>   drivers/pci/dwc/pcie-qcom.c                        | 24
>>> ++++++++++++++++++++--
>>>   2 files changed, 26 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>>> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>>> index 3c9d321b3d3b..1fd703bd73e0 100644
>>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
>>> @@ -189,6 +189,10 @@
>>>       Value type: <phandle>
>>>       Definition: A phandle to the analog power supply for IC which
>>> generates
>>>               reference clock
>>> +- vddpe-3v3-supply:
>> shouldn't it be vddpe_3v3-supply to be aligned with the other supplies?
>>
> I noticed that, I had to do it intentionally
> As dt properties should follow - instead of _

I don't agree with that. If the supply name is more than one word it
should be separated by underscore ('git grep \-supply' in dts files).

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 3c9d321b3d3b..1fd703bd73e0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -189,6 +189,10 @@ 
 	Value type: <phandle>
 	Definition: A phandle to the analog power supply for IC which generates
 		    reference clock
+- vddpe-3v3-supply:
+	Usage: optional
+	Value type: <phandle>
+	Definition: A phandle to the PCIe endpoint power supply
 
 - phys:
 	Usage: required for apq8084
diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 3e89909f8cb9..519a2ae416eb 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -101,13 +101,14 @@  struct qcom_pcie_resources_1_0_0 {
 	struct reset_control *core;
 	struct regulator *vdda;
 };
-
+#define QCOM_PCIE_2_3_2_MAX_SUPPLY	2
 struct qcom_pcie_resources_2_3_2 {
 	struct clk *aux_clk;
 	struct clk *master_clk;
 	struct clk *slave_clk;
 	struct clk *cfg_clk;
 	struct clk *pipe_clk;
+	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
 struct qcom_pcie_resources_2_4_0 {
@@ -521,6 +522,14 @@  static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
 	struct dw_pcie *pci = pcie->pci;
 	struct device *dev = pci->dev;
+	int ret;
+
+	res->supplies[0].supply = "vdda";
+	res->supplies[1].supply = "vddpe-3v3";
+	ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY,
+				      res->supplies);
+	if (ret)
+		return ret;
 
 	res->aux_clk = devm_clk_get(dev, "aux");
 	if (IS_ERR(res->aux_clk))
@@ -550,6 +559,8 @@  static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 	clk_disable_unprepare(res->master_clk);
 	clk_disable_unprepare(res->cfg_clk);
 	clk_disable_unprepare(res->aux_clk);
+
+	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
 }
 
 static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -567,10 +578,16 @@  static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 	u32 val;
 	int ret;
 
+	ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
+	if (ret < 0) {
+		dev_err(dev, "cannot enable regulators\n");
+		return ret;
+	}
+
 	ret = clk_prepare_enable(res->aux_clk);
 	if (ret) {
 		dev_err(dev, "cannot prepare/enable aux clock\n");
-		return ret;
+		goto err_aux_clk;
 	}
 
 	ret = clk_prepare_enable(res->cfg_clk);
@@ -621,6 +638,9 @@  static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 err_cfg_clk:
 	clk_disable_unprepare(res->aux_clk);
 
+err_aux_clk:
+	regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies);
+
 	return ret;
 }