[v13,1/9] LIB: Introduce a generic PIO mapping method

Message ID 1518543933-22456-2-git-send-email-john.garry@huawei.com
State Not Applicable
Headers show
Series
  • LPC: legacy ISA I/O support
Related show

Commit Message

John Garry Feb. 13, 2018, 5:45 p.m.
From: Zhichang Yuan <yuanzhichang@hisilicon.com>

In commit 41f8bba7f555 ("of/pci: Add pci_register_io_range() and
pci_pio_to_address()"), a new I/O space management was supported. With
that driver, the I/O ranges configured for PCI/PCIe hosts on some
architectures can be mapped to logical PIO, converted easily between
CPU address and the corresponding logicial PIO. Based on this, PCI
I/O devices can be accessed in a memory read/write way through the
unified in/out accessors.

But on some archs/platforms, there are bus hosts which access I/O
peripherals with host-local I/O port addresses rather than memory
addresses after memory-mapped.

To support those devices, a more generic I/O mapping method is introduced
here. Through this patch, both the CPU addresses and the host-local port
can be mapped into the logical PIO space with different logical/fake PIOs.
After this, all the I/O accesses to either PCI MMIO devices or host-local
I/O peripherals can be unified into the existing I/O accessors defined in
asm-generic/io.h and be redirected to the right device-specific hooks
based on the input logical PIO.

Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
---
 include/asm-generic/io.h  |   2 +
 include/linux/logic_pio.h | 131 ++++++++++++++++++++++
 lib/Kconfig               |  15 +++
 lib/Makefile              |   2 +
 lib/logic_pio.c           | 272 ++++++++++++++++++++++++++++++++++++++++++++++
 5 files changed, 422 insertions(+)
 create mode 100644 include/linux/logic_pio.h
 create mode 100644 lib/logic_pio.c

Comments

dann frazier Feb. 13, 2018, 11:05 p.m. | #1
On Wed, Feb 14, 2018 at 01:45:25AM +0800, John Garry wrote:
> From: Zhichang Yuan <yuanzhichang@hisilicon.com>
> 
> In commit 41f8bba7f555 ("of/pci: Add pci_register_io_range() and
> pci_pio_to_address()"), a new I/O space management was supported. With
> that driver, the I/O ranges configured for PCI/PCIe hosts on some
> architectures can be mapped to logical PIO, converted easily between
> CPU address and the corresponding logicial PIO. Based on this, PCI
> I/O devices can be accessed in a memory read/write way through the
> unified in/out accessors.
> 
> But on some archs/platforms, there are bus hosts which access I/O
> peripherals with host-local I/O port addresses rather than memory
> addresses after memory-mapped.
> 
> To support those devices, a more generic I/O mapping method is introduced
> here. Through this patch, both the CPU addresses and the host-local port
> can be mapped into the logical PIO space with different logical/fake PIOs.
> After this, all the I/O accesses to either PCI MMIO devices or host-local
> I/O peripherals can be unified into the existing I/O accessors defined in
> asm-generic/io.h and be redirected to the right device-specific hooks
> based on the input logical PIO.
> 
> Signed-off-by: Zhichang Yuan <yuanzhichang@hisilicon.com>
> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> Signed-off-by: John Garry <john.garry@huawei.com>
> ---
>  include/asm-generic/io.h  |   2 +
>  include/linux/logic_pio.h | 131 ++++++++++++++++++++++
>  lib/Kconfig               |  15 +++
>  lib/Makefile              |   2 +
>  lib/logic_pio.c           | 272 ++++++++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 422 insertions(+)
>  create mode 100644 include/linux/logic_pio.h
>  create mode 100644 lib/logic_pio.c
> 
> diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
> index b4531e3..b7996a79 100644
> --- a/include/asm-generic/io.h
> +++ b/include/asm-generic/io.h
> @@ -351,6 +351,8 @@ static inline void writesq(volatile void __iomem *addr, const void *buffer,
>  #define IO_SPACE_LIMIT 0xffff
>  #endif
>  
> +#include <linux/logic_pio.h>
> +
>  /*
>   * {in,out}{b,w,l}() access little endian I/O. {in,out}{b,w,l}_p() can be
>   * implemented on hardware that needs an additional delay for I/O accesses to
> diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
> new file mode 100644
> index 0000000..b3322fd
> --- /dev/null
> +++ b/include/linux/logic_pio.h
> @@ -0,0 +1,131 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
> + * Author: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> + * Author: Zhichang Yuan <yuanzhichang@hisilicon.com>
> + *
> + */
> +
> +#ifndef __LINUX_LOGIC_PIO_H__
> +#define __LINUX_LOGIC_PIO_H__
> +
> +#ifdef __KERNEL__
> +
> +#include <linux/fwnode.h>
> +
> +#define PIO_INDIRECT		0x01UL /* indirect IO flag */
> +#define PIO_CPU_MMIO		0x00UL /* memory mapped io flag */
> +
> +struct logic_pio_hwaddr {
> +	struct list_head list;
> +	struct fwnode_handle *fwnode;
> +	resource_size_t hw_start;
> +	resource_size_t io_start;
> +	resource_size_t size; /* range size populated */
> +	unsigned long flags;
> +
> +	void *devpara;	/* private parameter of the host device */
> +	struct hostio_ops *ops;	/* ops operating on this node */
> +};
> +
> +struct hostio_ops {
> +	u32 (*pfin)(void *devobj, unsigned long ptaddr,	size_t dlen);
> +	void (*pfout)(void *devobj, unsigned long ptaddr, u32 outval,
> +			size_t dlen);
> +	u32 (*pfins)(void *devobj, unsigned long ptaddr, void *inbuf,
> +			size_t dlen, unsigned int count);
> +	void (*pfouts)(void *devobj, unsigned long ptaddr,
> +			const void *outbuf, size_t dlen, unsigned int count);
> +};
> +
> +#ifdef CONFIG_INDIRECT_PIO
> +u8 logic_inb(unsigned long addr);
> +void logic_outb(u8 value, unsigned long addr);
> +void logic_outw(u16 value, unsigned long addr);
> +void logic_outl(u32 value, unsigned long addr);
> +u16 logic_inw(unsigned long addr);
> +u32 logic_inl(unsigned long addr);
> +void logic_outb(u8 value, unsigned long addr);
> +void logic_outw(u16 value, unsigned long addr);
> +void logic_outl(u32 value, unsigned long addr);
> +void logic_insb(unsigned long addr, void *buffer, unsigned int count);
> +void logic_insl(unsigned long addr, void *buffer, unsigned int count);
> +void logic_insw(unsigned long addr, void *buffer, unsigned int count);
> +void logic_outsb(unsigned long addr, const void *buffer, unsigned int count);
> +void logic_outsw(unsigned long addr, const void *buffer, unsigned int count);
> +void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
> +
> +#ifndef inb
> +#define inb logic_inb
> +#endif
> +
> +#ifndef inw
> +#define inw logic_inw
> +#endif
> +
> +#ifndef inl
> +#define inl logic_inl
> +#endif
> +
> +#ifndef outb
> +#define outb logic_outb
> +#endif
> +
> +#ifndef outw
> +#define outw logic_outw
> +#endif
> +
> +#ifndef outl
> +#define outl logic_outl
> +#endif
> +
> +#ifndef insb
> +#define insb logic_insb
> +#endif
> +
> +#ifndef insw
> +#define insw logic_insw
> +#endif
> +
> +#ifndef insl
> +#define insl logic_insl
> +#endif
> +
> +#ifndef outsb
> +#define outsb logic_outsb
> +#endif
> +
> +#ifndef outsw
> +#define outsw logic_outsw
> +#endif
> +
> +#ifndef outsl
> +#define outsl logic_outsl
> +#endif
> +
> +/*
> + * Below we reserve 0x4000 bytes for Indirect IO as so far this library is only
> + * used by Hisilicon LPC Host. If needed in future we may reserve a wider IO
> + * area by redefining the macro below.
> + */
> +#define PIO_INDIRECT_SIZE 0x4000
> +#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)
> +#else
> +#define MMIO_UPPER_LIMIT IO_SPACE_LIMIT
> +#endif /* CONFIG_INDIRECT_PIO */
> +
> +
> +struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
> +
> +unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
> +			resource_size_t hw_addr, resource_size_t size);
> +
> +int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
> +
> +
> +extern resource_size_t logic_pio_to_hwaddr(unsigned long pio);
> +
> +extern unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);
> +
> +#endif /* __KERNEL__ */
> +#endif /* __LINUX_LOGIC_PIO_H__ */
> diff --git a/lib/Kconfig b/lib/Kconfig
> index e960894..7ad1e69 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -55,6 +55,21 @@ config ARCH_USE_CMPXCHG_LOCKREF
>  config ARCH_HAS_FAST_MULTIPLIER
>  	bool
>  
> +config INDIRECT_PIO
> +	bool "Access I/O in non-MMIO mode"
> +	depends on ARM64
> +	help
> +	  On some platforms where no separate I/O space exists, there are I/O
> +	  hosts which can not be accessed in MMIO mode. Using the logical PIO
> +	  mechanism, the host-local I/O resource can be mapped into system
> +	  logic PIO space shared with MMIO hosts, such as PCI/PCIE, then the
> +	  system can access the I/O devices with the mapped logic PIO through
> +	  I/O accessors.
> +	  This way has a relatively little I/O performance cost. Please make

grammar nit - s/a relatively/relatively/

  -dann

> +	  sure your devices really need this configure item enabled.
> +
> +	  When in doubt, say N.
> +
>  config CRC_CCITT
>  	tristate "CRC-CCITT functions"
>  	help
> diff --git a/lib/Makefile b/lib/Makefile
> index a90d4fc..4a9eacd 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -81,6 +81,8 @@ obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
>  obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
>  obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
>  
> +obj-y += logic_pio.o
> +
>  obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
>  
>  obj-$(CONFIG_BTREE) += btree.o
> diff --git a/lib/logic_pio.c b/lib/logic_pio.c
> new file mode 100644
> index 0000000..1006d9d
> --- /dev/null
> +++ b/lib/logic_pio.c
> @@ -0,0 +1,272 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
> + * Author: Gabriele Paoloni <gabriele.paoloni@huawei.com>
> + * Author: Zhichang Yuan <yuanzhichang@hisilicon.com>
> + *
> + */
> +
> +#define pr_fmt(fmt)	"LOGIC PIO: " fmt
> +
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/logic_pio.h>
> +#include <linux/mm.h>
> +#include <linux/rculist.h>
> +#include <linux/sizes.h>
> +#include <linux/slab.h>
> +
> +/* The unique hardware address list. */
> +static LIST_HEAD(io_range_list);
> +static DEFINE_MUTEX(io_range_mutex);
> +
> +/*
> + * register a new io range node in the io range list.
> + *
> + * @newrange: pointer to the io range to be registered.
> + *
> + * returns 0 on success, the error code in case of failure
> + */
> +int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
> +{
> +	struct logic_pio_hwaddr *range;
> +	int ret = 0;
> +	resource_size_t start = new_range->hw_start;
> +	resource_size_t end = new_range->hw_start + new_range->size;
> +	resource_size_t allocated_mmio_size = 0;
> +	resource_size_t allocated_iio_size = MMIO_UPPER_LIMIT;
> +
> +	if (!new_range || !new_range->fwnode || !new_range->size)
> +		return -EINVAL;
> +
> +	mutex_lock(&io_range_mutex);
> +	list_for_each_entry_rcu(range, &io_range_list, list) {
> +		if (range->fwnode == new_range->fwnode) {
> +			/* range already there */
> +			ret = -EFAULT;
> +			goto end_register;
> +		}
> +		if (range->flags == PIO_CPU_MMIO &&
> +				new_range->flags == PIO_CPU_MMIO) {
> +			/* for MMIO ranges we need to check for overlap */
> +			if (start >= range->hw_start + range->size ||
> +			    end < range->hw_start)
> +				allocated_mmio_size += range->size;
> +			else {
> +				ret = -EFAULT;
> +				goto end_register;
> +			}
> +		} else if (range->flags == PIO_INDIRECT &&
> +			   new_range->flags == PIO_INDIRECT) {
> +			allocated_iio_size += range->size;
> +		}
> +	}
> +
> +	/* range not registered yet, check for available space */
> +	if (new_range->flags == PIO_CPU_MMIO) {
> +		if (allocated_mmio_size + new_range->size - 1 >
> +			MMIO_UPPER_LIMIT) {
> +			/* if it's too big check if 64K space can be reserved */
> +			if (allocated_mmio_size + SZ_64K - 1 >
> +			MMIO_UPPER_LIMIT) {
> +				ret = -E2BIG;
> +				goto end_register;
> +			}
> +			new_range->size = SZ_64K;
> +			pr_warn("Requested IO range too big, new size set to 64K\n");
> +		}
> +		new_range->io_start = allocated_mmio_size;
> +	} else if (new_range->flags == PIO_INDIRECT) {
> +		if (allocated_iio_size + new_range->size - 1 >
> +		    IO_SPACE_LIMIT) {
> +			ret = -E2BIG;
> +			goto end_register;
> +		}
> +		new_range->io_start = allocated_iio_size;
> +	} else {
> +		/* invalid flag */
> +		ret = -EINVAL;
> +		goto end_register;
> +	}
> +
> +	list_add_tail_rcu(&new_range->list, &io_range_list);
> +
> +end_register:
> +	mutex_unlock(&io_range_mutex);
> +	return ret;
> +}
> +
> +/*
> + * traverse the io_range_list to find the registered node whose device node
> + * and/or physical IO address match to.
> + */
> +struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
> +{
> +	struct logic_pio_hwaddr *range;
> +
> +	list_for_each_entry_rcu(range, &io_range_list, list) {
> +		if (range->fwnode == fwnode)
> +			return range;
> +	}
> +	return NULL;
> +}
> +
> +/* return a registered range given an input PIO token */
> +static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
> +{
> +	struct logic_pio_hwaddr *range;
> +
> +	list_for_each_entry_rcu(range, &io_range_list, list) {
> +		if (pio >= range->io_start &&
> +		    pio < range->io_start + range->size)
> +			return range;
> +	}
> +	pr_err("PIO entry token invalid\n");
> +	return NULL;
> +}
> +
> +/*
> + * Translate the input logical pio to the corresponding hardware address.
> + * The input pio should be unique in the whole logical PIO space.
> + */
> +resource_size_t logic_pio_to_hwaddr(unsigned long pio)
> +{
> +	struct logic_pio_hwaddr *range;
> +	resource_size_t hwaddr = -1;
> +
> +	range = find_io_range(pio);
> +	if (range)
> +		hwaddr = range->hw_start + pio - range->io_start;
> +
> +	return hwaddr;
> +}
> +
> +/*
> + * This function is generic for translating a hardware address to logical PIO.
> + * @hw_addr: the hardware address of host, can be CPU address or host-local
> + *		address;
> + */
> +unsigned long
> +logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, resource_size_t addr,
> +		       resource_size_t size)
> +{
> +	struct logic_pio_hwaddr *range;
> +
> +	range = find_io_range_by_fwnode(fwnode);
> +	if (!range || range->flags == PIO_CPU_MMIO) {
> +		pr_err("range not found or invalid\n");
> +		return -1;
> +	}
> +	if (range->size < size) {
> +		pr_err("resource size %pa cannot fit in IO range size %pa\n",
> +		       &size, &range->size);
> +		return -1;
> +	}
> +	return addr - range->hw_start + range->io_start;
> +}
> +
> +unsigned long
> +logic_pio_trans_cpuaddr(resource_size_t addr)
> +{
> +	struct logic_pio_hwaddr *range;
> +
> +	list_for_each_entry_rcu(range, &io_range_list, list) {
> +		if (range->flags != PIO_CPU_MMIO)
> +			continue;
> +		if (addr >= range->hw_start &&
> +		    addr < range->hw_start + range->size)
> +			return addr - range->hw_start +
> +				range->io_start;
> +	}
> +	pr_err("addr not registered in io_range_list\n");
> +	return -1;
> +}
> +
> +#if defined(CONFIG_INDIRECT_PIO) && defined(PCI_IOBASE)
> +#define BUILD_LOGIC_IO(bw, type)					\
> +type logic_in##bw(unsigned long addr)					\
> +{									\
> +	type ret = -1;							\
> +									\
> +	if (addr < MMIO_UPPER_LIMIT) {					\
> +		ret = read##bw(PCI_IOBASE + addr);			\
> +	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
> +		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
> +									\
> +		if (entry && entry->ops)				\
> +			ret = entry->ops->pfin(entry->devpara,		\
> +					addr, sizeof(type));		\
> +		else							\
> +			WARN_ON_ONCE(1);				\
> +	}								\
> +	return ret;							\
> +}									\
> +									\
> +void logic_out##bw(type value, unsigned long addr)			\
> +{									\
> +	if (addr < MMIO_UPPER_LIMIT) {					\
> +		write##bw(value, PCI_IOBASE + addr);			\
> +	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
> +		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
> +									\
> +		if (entry && entry->ops)				\
> +			entry->ops->pfout(entry->devpara,		\
> +					addr, value, sizeof(type));	\
> +		else							\
> +			WARN_ON_ONCE(1);				\
> +	}								\
> +}									\
> +									\
> +void logic_ins##bw(unsigned long addr, void *buffer, unsigned int count)\
> +{									\
> +	if (addr < MMIO_UPPER_LIMIT) {					\
> +		reads##bw(PCI_IOBASE + addr, buffer, count);		\
> +	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
> +		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
> +									\
> +		if (entry && entry->ops)				\
> +			entry->ops->pfins(entry->devpara,		\
> +				addr, buffer, sizeof(type), count);	\
> +		else							\
> +			WARN_ON_ONCE(1);				\
> +	}								\
> +									\
> +}									\
> +									\
> +void logic_outs##bw(unsigned long addr, const void *buffer,		\
> +		    unsigned int count)					\
> +{									\
> +	if (addr < MMIO_UPPER_LIMIT) {					\
> +		writes##bw(PCI_IOBASE + addr, buffer, count);		\
> +	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
> +		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
> +									\
> +		if (entry && entry->ops)				\
> +			entry->ops->pfouts(entry->devpara,		\
> +				addr, buffer, sizeof(type), count);	\
> +		else							\
> +			WARN_ON_ONCE(1);				\
> +	}								\
> +}
> +
> +BUILD_LOGIC_IO(b, u8)
> +
> +EXPORT_SYMBOL(logic_inb);
> +EXPORT_SYMBOL(logic_outb);
> +EXPORT_SYMBOL(logic_insb);
> +EXPORT_SYMBOL(logic_outsb);
> +
> +BUILD_LOGIC_IO(w, u16)
> +
> +EXPORT_SYMBOL(logic_inw);
> +EXPORT_SYMBOL(logic_outw);
> +EXPORT_SYMBOL(logic_insw);
> +EXPORT_SYMBOL(logic_outsw);
> +
> +BUILD_LOGIC_IO(l, u32)
> +
> +EXPORT_SYMBOL(logic_inl);
> +EXPORT_SYMBOL(logic_outl);
> +EXPORT_SYMBOL(logic_insl);
> +EXPORT_SYMBOL(logic_outsl);
> +#endif /* CONFIG_INDIRECT_PIO && PCI_IOBASE */
John Garry Feb. 14, 2018, 4:13 p.m. | #2
On 13/02/2018 23:05, dann frazier wrote:
>>  	bool
>> >
>> > +config INDIRECT_PIO
>> > +	bool "Access I/O in non-MMIO mode"
>> > +	depends on ARM64
>> > +	help
>> > +	  On some platforms where no separate I/O space exists, there are I/O
>> > +	  hosts which can not be accessed in MMIO mode. Using the logical PIO
>> > +	  mechanism, the host-local I/O resource can be mapped into system
>> > +	  logic PIO space shared with MMIO hosts, such as PCI/PCIE, then the
>> > +	  system can access the I/O devices with the mapped logic PIO through
>> > +	  I/O accessors.
>> > +	  This way has a relatively little I/O performance cost. Please make
> grammar nit - s/a relatively/relatively/
>

Fine, thanks

John

>   -dann
>
>> > +	  sure your devices really need this configure item enabled.
>> > +

Patch

diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index b4531e3..b7996a79 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -351,6 +351,8 @@  static inline void writesq(volatile void __iomem *addr, const void *buffer,
 #define IO_SPACE_LIMIT 0xffff
 #endif
 
+#include <linux/logic_pio.h>
+
 /*
  * {in,out}{b,w,l}() access little endian I/O. {in,out}{b,w,l}_p() can be
  * implemented on hardware that needs an additional delay for I/O accesses to
diff --git a/include/linux/logic_pio.h b/include/linux/logic_pio.h
new file mode 100644
index 0000000..b3322fd
--- /dev/null
+++ b/include/linux/logic_pio.h
@@ -0,0 +1,131 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
+ * Author: Gabriele Paoloni <gabriele.paoloni@huawei.com>
+ * Author: Zhichang Yuan <yuanzhichang@hisilicon.com>
+ *
+ */
+
+#ifndef __LINUX_LOGIC_PIO_H__
+#define __LINUX_LOGIC_PIO_H__
+
+#ifdef __KERNEL__
+
+#include <linux/fwnode.h>
+
+#define PIO_INDIRECT		0x01UL /* indirect IO flag */
+#define PIO_CPU_MMIO		0x00UL /* memory mapped io flag */
+
+struct logic_pio_hwaddr {
+	struct list_head list;
+	struct fwnode_handle *fwnode;
+	resource_size_t hw_start;
+	resource_size_t io_start;
+	resource_size_t size; /* range size populated */
+	unsigned long flags;
+
+	void *devpara;	/* private parameter of the host device */
+	struct hostio_ops *ops;	/* ops operating on this node */
+};
+
+struct hostio_ops {
+	u32 (*pfin)(void *devobj, unsigned long ptaddr,	size_t dlen);
+	void (*pfout)(void *devobj, unsigned long ptaddr, u32 outval,
+			size_t dlen);
+	u32 (*pfins)(void *devobj, unsigned long ptaddr, void *inbuf,
+			size_t dlen, unsigned int count);
+	void (*pfouts)(void *devobj, unsigned long ptaddr,
+			const void *outbuf, size_t dlen, unsigned int count);
+};
+
+#ifdef CONFIG_INDIRECT_PIO
+u8 logic_inb(unsigned long addr);
+void logic_outb(u8 value, unsigned long addr);
+void logic_outw(u16 value, unsigned long addr);
+void logic_outl(u32 value, unsigned long addr);
+u16 logic_inw(unsigned long addr);
+u32 logic_inl(unsigned long addr);
+void logic_outb(u8 value, unsigned long addr);
+void logic_outw(u16 value, unsigned long addr);
+void logic_outl(u32 value, unsigned long addr);
+void logic_insb(unsigned long addr, void *buffer, unsigned int count);
+void logic_insl(unsigned long addr, void *buffer, unsigned int count);
+void logic_insw(unsigned long addr, void *buffer, unsigned int count);
+void logic_outsb(unsigned long addr, const void *buffer, unsigned int count);
+void logic_outsw(unsigned long addr, const void *buffer, unsigned int count);
+void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);
+
+#ifndef inb
+#define inb logic_inb
+#endif
+
+#ifndef inw
+#define inw logic_inw
+#endif
+
+#ifndef inl
+#define inl logic_inl
+#endif
+
+#ifndef outb
+#define outb logic_outb
+#endif
+
+#ifndef outw
+#define outw logic_outw
+#endif
+
+#ifndef outl
+#define outl logic_outl
+#endif
+
+#ifndef insb
+#define insb logic_insb
+#endif
+
+#ifndef insw
+#define insw logic_insw
+#endif
+
+#ifndef insl
+#define insl logic_insl
+#endif
+
+#ifndef outsb
+#define outsb logic_outsb
+#endif
+
+#ifndef outsw
+#define outsw logic_outsw
+#endif
+
+#ifndef outsl
+#define outsl logic_outsl
+#endif
+
+/*
+ * Below we reserve 0x4000 bytes for Indirect IO as so far this library is only
+ * used by Hisilicon LPC Host. If needed in future we may reserve a wider IO
+ * area by redefining the macro below.
+ */
+#define PIO_INDIRECT_SIZE 0x4000
+#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)
+#else
+#define MMIO_UPPER_LIMIT IO_SPACE_LIMIT
+#endif /* CONFIG_INDIRECT_PIO */
+
+
+struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode);
+
+unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
+			resource_size_t hw_addr, resource_size_t size);
+
+int logic_pio_register_range(struct logic_pio_hwaddr *newrange);
+
+
+extern resource_size_t logic_pio_to_hwaddr(unsigned long pio);
+
+extern unsigned long logic_pio_trans_cpuaddr(resource_size_t hw_addr);
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_LOGIC_PIO_H__ */
diff --git a/lib/Kconfig b/lib/Kconfig
index e960894..7ad1e69 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -55,6 +55,21 @@  config ARCH_USE_CMPXCHG_LOCKREF
 config ARCH_HAS_FAST_MULTIPLIER
 	bool
 
+config INDIRECT_PIO
+	bool "Access I/O in non-MMIO mode"
+	depends on ARM64
+	help
+	  On some platforms where no separate I/O space exists, there are I/O
+	  hosts which can not be accessed in MMIO mode. Using the logical PIO
+	  mechanism, the host-local I/O resource can be mapped into system
+	  logic PIO space shared with MMIO hosts, such as PCI/PCIE, then the
+	  system can access the I/O devices with the mapped logic PIO through
+	  I/O accessors.
+	  This way has a relatively little I/O performance cost. Please make
+	  sure your devices really need this configure item enabled.
+
+	  When in doubt, say N.
+
 config CRC_CCITT
 	tristate "CRC-CCITT functions"
 	help
diff --git a/lib/Makefile b/lib/Makefile
index a90d4fc..4a9eacd 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -81,6 +81,8 @@  obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
 obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
 obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
 
+obj-y += logic_pio.o
+
 obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
 
 obj-$(CONFIG_BTREE) += btree.o
diff --git a/lib/logic_pio.c b/lib/logic_pio.c
new file mode 100644
index 0000000..1006d9d
--- /dev/null
+++ b/lib/logic_pio.c
@@ -0,0 +1,272 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Hisilicon Limited, All Rights Reserved.
+ * Author: Gabriele Paoloni <gabriele.paoloni@huawei.com>
+ * Author: Zhichang Yuan <yuanzhichang@hisilicon.com>
+ *
+ */
+
+#define pr_fmt(fmt)	"LOGIC PIO: " fmt
+
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/logic_pio.h>
+#include <linux/mm.h>
+#include <linux/rculist.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+/* The unique hardware address list. */
+static LIST_HEAD(io_range_list);
+static DEFINE_MUTEX(io_range_mutex);
+
+/*
+ * register a new io range node in the io range list.
+ *
+ * @newrange: pointer to the io range to be registered.
+ *
+ * returns 0 on success, the error code in case of failure
+ */
+int logic_pio_register_range(struct logic_pio_hwaddr *new_range)
+{
+	struct logic_pio_hwaddr *range;
+	int ret = 0;
+	resource_size_t start = new_range->hw_start;
+	resource_size_t end = new_range->hw_start + new_range->size;
+	resource_size_t allocated_mmio_size = 0;
+	resource_size_t allocated_iio_size = MMIO_UPPER_LIMIT;
+
+	if (!new_range || !new_range->fwnode || !new_range->size)
+		return -EINVAL;
+
+	mutex_lock(&io_range_mutex);
+	list_for_each_entry_rcu(range, &io_range_list, list) {
+		if (range->fwnode == new_range->fwnode) {
+			/* range already there */
+			ret = -EFAULT;
+			goto end_register;
+		}
+		if (range->flags == PIO_CPU_MMIO &&
+				new_range->flags == PIO_CPU_MMIO) {
+			/* for MMIO ranges we need to check for overlap */
+			if (start >= range->hw_start + range->size ||
+			    end < range->hw_start)
+				allocated_mmio_size += range->size;
+			else {
+				ret = -EFAULT;
+				goto end_register;
+			}
+		} else if (range->flags == PIO_INDIRECT &&
+			   new_range->flags == PIO_INDIRECT) {
+			allocated_iio_size += range->size;
+		}
+	}
+
+	/* range not registered yet, check for available space */
+	if (new_range->flags == PIO_CPU_MMIO) {
+		if (allocated_mmio_size + new_range->size - 1 >
+			MMIO_UPPER_LIMIT) {
+			/* if it's too big check if 64K space can be reserved */
+			if (allocated_mmio_size + SZ_64K - 1 >
+			MMIO_UPPER_LIMIT) {
+				ret = -E2BIG;
+				goto end_register;
+			}
+			new_range->size = SZ_64K;
+			pr_warn("Requested IO range too big, new size set to 64K\n");
+		}
+		new_range->io_start = allocated_mmio_size;
+	} else if (new_range->flags == PIO_INDIRECT) {
+		if (allocated_iio_size + new_range->size - 1 >
+		    IO_SPACE_LIMIT) {
+			ret = -E2BIG;
+			goto end_register;
+		}
+		new_range->io_start = allocated_iio_size;
+	} else {
+		/* invalid flag */
+		ret = -EINVAL;
+		goto end_register;
+	}
+
+	list_add_tail_rcu(&new_range->list, &io_range_list);
+
+end_register:
+	mutex_unlock(&io_range_mutex);
+	return ret;
+}
+
+/*
+ * traverse the io_range_list to find the registered node whose device node
+ * and/or physical IO address match to.
+ */
+struct logic_pio_hwaddr *find_io_range_by_fwnode(struct fwnode_handle *fwnode)
+{
+	struct logic_pio_hwaddr *range;
+
+	list_for_each_entry_rcu(range, &io_range_list, list) {
+		if (range->fwnode == fwnode)
+			return range;
+	}
+	return NULL;
+}
+
+/* return a registered range given an input PIO token */
+static struct logic_pio_hwaddr *find_io_range(unsigned long pio)
+{
+	struct logic_pio_hwaddr *range;
+
+	list_for_each_entry_rcu(range, &io_range_list, list) {
+		if (pio >= range->io_start &&
+		    pio < range->io_start + range->size)
+			return range;
+	}
+	pr_err("PIO entry token invalid\n");
+	return NULL;
+}
+
+/*
+ * Translate the input logical pio to the corresponding hardware address.
+ * The input pio should be unique in the whole logical PIO space.
+ */
+resource_size_t logic_pio_to_hwaddr(unsigned long pio)
+{
+	struct logic_pio_hwaddr *range;
+	resource_size_t hwaddr = -1;
+
+	range = find_io_range(pio);
+	if (range)
+		hwaddr = range->hw_start + pio - range->io_start;
+
+	return hwaddr;
+}
+
+/*
+ * This function is generic for translating a hardware address to logical PIO.
+ * @hw_addr: the hardware address of host, can be CPU address or host-local
+ *		address;
+ */
+unsigned long
+logic_pio_trans_hwaddr(struct fwnode_handle *fwnode, resource_size_t addr,
+		       resource_size_t size)
+{
+	struct logic_pio_hwaddr *range;
+
+	range = find_io_range_by_fwnode(fwnode);
+	if (!range || range->flags == PIO_CPU_MMIO) {
+		pr_err("range not found or invalid\n");
+		return -1;
+	}
+	if (range->size < size) {
+		pr_err("resource size %pa cannot fit in IO range size %pa\n",
+		       &size, &range->size);
+		return -1;
+	}
+	return addr - range->hw_start + range->io_start;
+}
+
+unsigned long
+logic_pio_trans_cpuaddr(resource_size_t addr)
+{
+	struct logic_pio_hwaddr *range;
+
+	list_for_each_entry_rcu(range, &io_range_list, list) {
+		if (range->flags != PIO_CPU_MMIO)
+			continue;
+		if (addr >= range->hw_start &&
+		    addr < range->hw_start + range->size)
+			return addr - range->hw_start +
+				range->io_start;
+	}
+	pr_err("addr not registered in io_range_list\n");
+	return -1;
+}
+
+#if defined(CONFIG_INDIRECT_PIO) && defined(PCI_IOBASE)
+#define BUILD_LOGIC_IO(bw, type)					\
+type logic_in##bw(unsigned long addr)					\
+{									\
+	type ret = -1;							\
+									\
+	if (addr < MMIO_UPPER_LIMIT) {					\
+		ret = read##bw(PCI_IOBASE + addr);			\
+	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) { \
+		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+									\
+		if (entry && entry->ops)				\
+			ret = entry->ops->pfin(entry->devpara,		\
+					addr, sizeof(type));		\
+		else							\
+			WARN_ON_ONCE(1);				\
+	}								\
+	return ret;							\
+}									\
+									\
+void logic_out##bw(type value, unsigned long addr)			\
+{									\
+	if (addr < MMIO_UPPER_LIMIT) {					\
+		write##bw(value, PCI_IOBASE + addr);			\
+	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
+		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+									\
+		if (entry && entry->ops)				\
+			entry->ops->pfout(entry->devpara,		\
+					addr, value, sizeof(type));	\
+		else							\
+			WARN_ON_ONCE(1);				\
+	}								\
+}									\
+									\
+void logic_ins##bw(unsigned long addr, void *buffer, unsigned int count)\
+{									\
+	if (addr < MMIO_UPPER_LIMIT) {					\
+		reads##bw(PCI_IOBASE + addr, buffer, count);		\
+	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
+		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+									\
+		if (entry && entry->ops)				\
+			entry->ops->pfins(entry->devpara,		\
+				addr, buffer, sizeof(type), count);	\
+		else							\
+			WARN_ON_ONCE(1);				\
+	}								\
+									\
+}									\
+									\
+void logic_outs##bw(unsigned long addr, const void *buffer,		\
+		    unsigned int count)					\
+{									\
+	if (addr < MMIO_UPPER_LIMIT) {					\
+		writes##bw(PCI_IOBASE + addr, buffer, count);		\
+	} else if (addr >= MMIO_UPPER_LIMIT && addr < IO_SPACE_LIMIT) {	\
+		struct logic_pio_hwaddr *entry = find_io_range(addr);	\
+									\
+		if (entry && entry->ops)				\
+			entry->ops->pfouts(entry->devpara,		\
+				addr, buffer, sizeof(type), count);	\
+		else							\
+			WARN_ON_ONCE(1);				\
+	}								\
+}
+
+BUILD_LOGIC_IO(b, u8)
+
+EXPORT_SYMBOL(logic_inb);
+EXPORT_SYMBOL(logic_outb);
+EXPORT_SYMBOL(logic_insb);
+EXPORT_SYMBOL(logic_outsb);
+
+BUILD_LOGIC_IO(w, u16)
+
+EXPORT_SYMBOL(logic_inw);
+EXPORT_SYMBOL(logic_outw);
+EXPORT_SYMBOL(logic_insw);
+EXPORT_SYMBOL(logic_outsw);
+
+BUILD_LOGIC_IO(l, u32)
+
+EXPORT_SYMBOL(logic_inl);
+EXPORT_SYMBOL(logic_outl);
+EXPORT_SYMBOL(logic_insl);
+EXPORT_SYMBOL(logic_outsl);
+#endif /* CONFIG_INDIRECT_PIO && PCI_IOBASE */