@@ -541,11 +541,10 @@ static const struct rtc_class_ops cmos_rtc_ops = {
#define NVRAM_OFFSET (RTC_REG_D + 1)
-static ssize_t
-cmos_nvram_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int cmos_nvram_read(void *priv, unsigned int off, void *val,
+ size_t count)
{
+ unsigned char *buf = val;
int retval;
off += NVRAM_OFFSET;
@@ -563,16 +562,13 @@ cmos_nvram_read(struct file *filp, struct kobject *kobj,
return retval;
}
-static ssize_t
-cmos_nvram_write(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr,
- char *buf, loff_t off, size_t count)
+static int cmos_nvram_write(void *priv, unsigned int off, void *val,
+ size_t count)
{
- struct cmos_rtc *cmos;
+ struct cmos_rtc *cmos = priv;
+ unsigned char *buf = val;
int retval;
- cmos = dev_get_drvdata(container_of(kobj, struct device, kobj));
-
/* NOTE: on at least PCs and Ataris, the boot firmware uses a
* checksum on part of the NVRAM data. That's currently ignored
* here. If userspace is smart enough to know what fields of
@@ -598,17 +594,6 @@ cmos_nvram_write(struct file *filp, struct kobject *kobj,
return retval;
}
-static struct bin_attribute nvram = {
- .attr = {
- .name = "nvram",
- .mode = S_IRUGO | S_IWUSR,
- },
-
- .read = cmos_nvram_read,
- .write = cmos_nvram_write,
- /* size gets set up later */
-};
-
/*----------------------------------------------------------------*/
static struct cmos_rtc cmos_rtc;
@@ -675,6 +660,14 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
unsigned char rtc_control;
unsigned address_space;
u32 flags = 0;
+ struct nvmem_config nvmem_cfg = {
+ .name = "cmos_nvram",
+ .word_size = 1,
+ .stride = 1,
+ .reg_read = cmos_nvram_read,
+ .reg_write = cmos_nvram_write,
+ .priv = &cmos_rtc,
+ };
/* there can be only one ... */
if (cmos_rtc.dev)
@@ -813,32 +806,28 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
}
}
- /* export at least the first block of NVRAM */
- nvram.size = address_space - NVRAM_OFFSET;
- retval = sysfs_create_bin_file(&dev->kobj, &nvram);
- if (retval < 0) {
- dev_dbg(dev, "can't create nvram file? %d\n", retval);
- goto cleanup2;
- }
-
cmos_rtc.rtc->ops = &cmos_rtc_ops;
+ cmos_rtc.rtc->nvram_old_abi = true;
retval = rtc_register_device(cmos_rtc.rtc);
if (retval)
- goto cleanup3;
+ goto cleanup2;
- dev_info(dev, "%s%s, %zd bytes nvram%s\n",
- !is_valid_irq(rtc_irq) ? "no alarms" :
- cmos_rtc.mon_alrm ? "alarms up to one year" :
- cmos_rtc.day_alrm ? "alarms up to one month" :
- "alarms up to one day",
- cmos_rtc.century ? ", y3k" : "",
- nvram.size,
- is_hpet_enabled() ? ", hpet irqs" : "");
+ /* export at least the first block of NVRAM */
+ nvmem_cfg.size = address_space - NVRAM_OFFSET;
+ if (rtc_nvmem_register(cmos_rtc.rtc, &nvmem_cfg))
+ dev_err(dev, "nvmem registration failed\n");
+
+ dev_info(dev, "%s%s, %d bytes nvram%s\n",
+ !is_valid_irq(rtc_irq) ? "no alarms" :
+ cmos_rtc.mon_alrm ? "alarms up to one year" :
+ cmos_rtc.day_alrm ? "alarms up to one month" :
+ "alarms up to one day",
+ cmos_rtc.century ? ", y3k" : "",
+ nvmem_cfg.size,
+ is_hpet_enabled() ? ", hpet irqs" : "");
return 0;
-cleanup3:
- sysfs_remove_bin_file(&dev->kobj, &nvram);
cleanup2:
if (is_valid_irq(rtc_irq))
free_irq(rtc_irq, cmos_rtc.rtc);
@@ -867,8 +856,6 @@ static void cmos_do_remove(struct device *dev)
cmos_do_shutdown(cmos->irq);
- sysfs_remove_bin_file(&dev->kobj, &nvram);
-
if (is_valid_irq(cmos->irq)) {
free_irq(cmos->irq, cmos->rtc);
hpet_unregister_irq_handler(cmos_interrupt);
Instead of adding a binary sysfs attribute from the driver, use the core to register an nvmem device. This allows to use the in-kernel interface to access the nvram. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/rtc/rtc-cmos.c | 73 +++++++++++++++++++++----------------------------- 1 file changed, 30 insertions(+), 43 deletions(-)