[U-Boot,RFC,2/3] ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout

Message ID 20180212051329.29761-3-woods.technical@gmail.com
State Superseded
Delegated to: Tom Rini
Headers show
Series
  • ARM: omap3: beagle, evm: synchronize common setup
Related show

Commit Message

Derald D. Woods Feb. 12, 2018, 5:13 a.m.
This commit does the following for BeagleBoard{-xM}:

- Enable DM_SERIAL which also enables SPL_DM_SERIAL
- Misc. config updates in support of DM_SERIAL
- Use CONFIG_ENV_IS_IN_FAT because BeagleBoard-xM has no NAND
- Use updated NAND layout (BeagleBoard):

	device nand0 <omap2-nand.0>, # parts = 6

	#: name		size			offset
	-------------------------------------------------
	0: spl		0x00080000(512k)	0x00000000
	1: u-boot	0x001e0000(1920k)	0x00080000
	2: u-boot-env	0x00020000(128k)	0x00260000
	3: dtb		0x00020000(128k)	0x00280000
	4: kernel	0x00600000(6m)		0x002a0000
	5: rootfs	0x0f760000(-)		0x008a0000
	-------------------------------------------------

- Use MMC and UBIFS support from config_distro_bootcmd.h
- Use LEGACY_MMC and NAND support defined in omap3_beagle.h

[MMC(0:1)/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-beagle-mmc-fat
label omap3-beagle-mmc-fat
	kernel /zImage
	fdt /omap3-beagle.dtb
	append console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[LEGACY_MMC(0:2)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-beagle-mmc-ext4
label omap3-beagle-mmc-ext4
	kernel /boot/zImage
	fdt /boot/omap3-beagle.dtb
	append console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait
---8<-------------------------------------------------------------------

[UBIFS(ubi0:rootfs)/boot/extlinux/extlinux.conf]
---8<-------------------------------------------------------------------
default omap3-beagle-nand-ubifs
label omap3-beagle-nand-ubifs
	kernel /boot/zImage
	fdt /boot/omap3-beagle.dtb
	append console=ttyO2,115200n8 root=ubi0:rootfs rw ubi.mtd=rootfs rootfstype=ubifs rootwait
---8<-------------------------------------------------------------------

The board's 'bootcmd' can also be overridden with:

	CONFIG_BOOTCOMMAND="run findfdt; run mmcboot"
	CONFIG_BOOTCOMMAND="run findfdt; run nandboot"
	CONFIG_BOOTCOMMAND="run findfdt; run ramboot"

		or

	CONFIG_BOOTCOMMAND="run findfdt; run somethingelse"

The use of 'run findfdt' is required.

Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
---
 configs/omap3_beagle_defconfig |  29 ++++-
 include/configs/omap3_beagle.h | 241 +++++++++++++++++++++++------------------
 2 files changed, 157 insertions(+), 113 deletions(-)

Patch

diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index f0169a4544..51e1976899 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -4,32 +4,43 @@  CONFIG_SYS_TEXT_BASE=0x80100000
 CONFIG_TARGET_OMAP3_BEAGLE=y
 CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
 CONFIG_DISTRO_DEFAULTS=y
-# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
 CONFIG_VERSION_VARIABLE=y
 CONFIG_SPL=y
+# CONFIG_SPL_EXT_SUPPORT is not set
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_PROMPT="BeagleBoard # "
 CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000
 CONFIG_CMD_SPL=y
-CONFIG_CMD_SPL_NAND_OFS=0x240000
+CONFIG_CMD_SPL_NAND_OFS=0x280000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
 CONFIG_CMD_ASKENV=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs)"
+CONFIG_CMD_FS_UUID=y
+CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_OF_CONTROL=y
-CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_INTERFACE="mmc"
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SPL_DM=y
 CONFIG_LED_STATUS=y
 CONFIG_LED_STATUS0=y
 CONFIG_LED_STATUS_BIT=1
@@ -45,11 +56,15 @@  CONFIG_LED_STATUS_CMD=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_NAND=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
 CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OMAP3=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_MUSB_OMAP2PLUS=y
 CONFIG_TWL4030_USB=y
@@ -65,3 +80,5 @@  CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_FAT_WRITE=y
 CONFIG_BCH=y
+CONFIG_SPL_OF_LIBFDT=y
+# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index d3dfe60bb0..c992485af8 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -12,7 +12,7 @@ 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
+#define CONFIG_NR_DRAM_BANKS            2 /* CS1 may or may not be populated */
 
 #include <configs/ti_omap3_common.h>
 
@@ -47,22 +47,17 @@ 
 #define CONFIG_SYS_NAND_ECCBYTES        3
 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
-#define CONFIG_ENV_IS_IN_NAND           1
-#define CONFIG_ENV_SIZE                 (128 << 10) /* 128 KiB */
-#define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10) /* 128 KiB */
+#define CONFIG_SYS_ENV_SECT_SIZE        SZ_128K
 #define CONFIG_ENV_OFFSET               0x260000
 #define CONFIG_ENV_ADDR                 0x260000
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
 /* NAND: SPL falcon mode configs */
 #if defined(CONFIG_SPL_OS_BOOT)
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
 #endif /* CONFIG_SPL_OS_BOOT */
 #endif /* CONFIG_NAND */
 
-/* MUSB */
-#define CONFIG_USB_OMAP3
-
 /* USB EHCI */
 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	147
 
@@ -75,88 +70,77 @@ 
 /* TWL4030 LED Support */
 #define CONFIG_TWL4030_LED
 
+/* Environment */
+#define CONFIG_ENV_SIZE                 SZ_128K
+
+#define CONFIG_PREBOOT                  "usb start"
+
+#include <config_distro_defaults.h>
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV
+
+#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=" \
+	"setenv mmcdev " #instance "; " \
+	"run mmcboot\0"
+#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \
+	#devtypel #instance " "
+
+#if defined(CONFIG_NAND)
+
+#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \
+	"bootcmd_" #devtypel #instance "=" \
+	"if test ${mtdids} = '' || test ${mtdparts} = '' ; then " \
+		"echo NAND boot disabled: No mtdids and/or mtdparts; " \
+	"else " \
+		"run nandboot; " \
+	"fi\0"
+#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \
+	#devtypel #instance " "
+
 #define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 0)
-
-#define CONFIG_BOOTCOMMAND \
-	"run findfdt; " \
-	"run distro_bootcmd; " \
-	"mmc dev ${mmcdev}; if mmc rescan; then " \
-		"if run userbutton; then " \
-			"setenv bootenv uEnv.txt;" \
-		"else " \
-			"setenv bootenv user.txt;" \
-		"fi;" \
-		"echo SD/MMC found on device ${mmcdev};" \
-		"if run loadbootenv; then " \
-			"echo Loaded environment from ${bootenv};" \
-			"run importbootenv;" \
-		"fi;" \
-		"if test -n $uenvcmd; then " \
-			"echo Running uenvcmd ...;" \
-			"run uenvcmd;" \
-		"fi;" \
-		"if run loadbootscript; then " \
-			"run bootscript; " \
-		"else " \
-			"if run loadimage; then " \
-				"run loadfdt;" \
-				"run mmcboot;" \
-			"fi;" \
-		"fi; " \
-	"fi;" \
-	"run nandboot;" \
-	"setenv bootfile zImage;" \
-	"if run loadimage; then " \
-		"run loadfdt;" \
-		"run mmcbootz; " \
-	"fi; " \
+	func(MMC, mmc, 0) \
+	func(LEGACY_MMC, legacy_mmc, 0) \
+	func(UBIFS, ubifs, 0) \
+	func(NAND, nand, 0)
+
+#else /* !CONFIG_NAND */
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(LEGACY_MMC, legacy_mmc, 0)
+
+#endif /* CONFIG_NAND */
 
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-	DEFAULT_LINUX_BOOT_ENV \
+	MEM_LAYOUT_ENV_SETTINGS \
+	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"fdt_high=0xffffffff\0" \
-	"usbtty=cdc_acm\0" \
-	"bootfile=uImage\0" \
-	"ramdisk=ramdisk.gz\0" \
+	"console=ttyO2,115200n8\0" \
 	"bootdir=/boot\0" \
+	"bootenv=uEnv.txt\0" \
+	"bootfile=zImage\0" \
 	"bootpart=0:2\0" \
-	"console=ttyO2,115200n8\0" \
+	"bootubivol=rootfs\0" \
+	"bootubipart=rootfs\0" \
+	"usbtty=cdc_acm\0" \
 	"mpurate=auto\0" \
 	"buddy=none\0" \
-	"optargs=\0" \
 	"camera=none\0" \
 	"vram=12M\0" \
 	"dvimode=640x480MR-16@60\0" \
 	"defaultdisplay=dvi\0" \
-	"mmcdev=0\0" \
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext4 rootwait\0" \
-	"nandroot=ubi0:rootfs ubi.mtd=4\0" \
-	"nandrootfstype=ubifs\0" \
-	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-	"ramrootfstype=ext2\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${optargs} " \
+	"defaultargs=setenv defargs " \
 		"mpurate=${mpurate} " \
 		"buddy=${buddy} "\
 		"camera=${camera} "\
 		"vram=${vram} " \
 		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype}\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"buddy=${buddy} "\
-		"camera=${camera} "\
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype}\0" \
+		"omapdss.def_disp=${defaultdisplay}\0" \
+	"optargs=\0" \
 	"findfdt=" \
 		"if test $beaglerev = AxBx; then " \
 			"setenv fdtfile omap3-beagle.dtb; fi; " \
@@ -169,49 +153,92 @@ 
 		"if test $beaglerev = xMC; then " \
 			"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
 		"if test $fdtfile = undefined; then " \
-			"echo WARNING: Could not determine device tree to use; fi; \0" \
+			"echo WARNING: Could not determine device tree to use; fi\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"mmcargs=run defaultargs; setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${defargs} " \
+		"${optargs} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"userbutton_xm=gpio input 4;\0" \
+	"userbutton_nonxm=gpio input 7;\0" \
+	"userbutton=if gpio input 173; then " \
+			"run userbutton_xm; " \
+		"else " \
+			"run userbutton_nonxm; " \
+		"fi;\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+	"ext4bootenv=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootenv}\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"mmcbootenv=setenv bootpart ${mmcdev}:${mmcpart}; " \
+		"mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"if run userbutton; then " \
+				"setenv bootenv uEnv.txt;" \
+			"else " \
+				"setenv bootenv user.txt;" \
+			"fi;" \
+			"run loadbootenv && run importbootenv; " \
+			"run ext4bootenv && run importbootenv; " \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...; " \
+				"run uenvcmd; " \
+			"fi; " \
+		"fi\0" \
 	"validatefdt=" \
 		"if test $beaglerev = xMAB; then " \
 			"if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
 				"setenv fdtfile omap3-beagle-xm.dtb; " \
 			"fi; " \
 		"fi; \0" \
-	"bootenv=uEnv.txt\0" \
-	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
-	"importbootenv=echo Importing environment from mmc ...; " \
-		"env import -t -r $loadaddr $filesize\0" \
-	"ramargs=setenv bootargs console=${console} " \
+	"loadimage=ext4load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"loaddtb=run validatefdt; ext4load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+	"mmcboot=run mmcbootenv; " \
+		"if run loadimage && run loaddtb; then " \
+			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} ...; " \
+			"run mmcargs; " \
+			"if test ${bootfile} = uImage; then " \
+				"bootm ${loadaddr} - ${fdtaddr}; " \
+			"fi; " \
+			"if test ${bootfile} = zImage; then " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
+			"fi; " \
+		"fi\0" \
+	"nandroot=ubi0:rootfs ubi.mtd=rootfs rw\0" \
+	"nandrootfstype=ubifs rootwait\0" \
+	"nandargs=run defaultargs; setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${defargs} " \
 		"${optargs} " \
-		"mpurate=${mpurate} " \
-		"buddy=${buddy} "\
-		"vram=${vram} " \
-		"omapfb.mode=dvi:${dvimode} " \
-		"omapdss.def_disp=${defaultdisplay} " \
-		"root=${ramroot} " \
-		"rootfstype=${ramrootfstype}\0" \
-	"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
-	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
-	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
-	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
-		"source ${loadaddr}\0" \
-	"loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
-	"mmcboot=echo Booting ${bootfile} with DT from mmc${mmcdev} ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr} - ${fdtaddr}\0" \
-	"mmcbootz=echo Booting ${bootfile} with DT from mmc${mmcdev} ...; " \
-		"run mmcargs; " \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 280000 400000; " \
-		"bootm ${loadaddr}\0" \
-	"ramboot=echo Booting from ramdisk ...; " \
-		"run ramargs; " \
-		"bootm ${loadaddr}\0" \
-	"userbutton=if gpio input 173; then run userbutton_xm; " \
-		"else run userbutton_nonxm; fi;\0" \
-	"userbutton_xm=gpio input 4;\0" \
-	"userbutton_nonxm=gpio input 7;\0" \
+		"root=${nandroot} " \
+		"rootfstype=${nandrootfstype}\0" \
+	"nandboot=if nand read ${loadaddr} kernel && nand read ${fdtaddr} dtb; then " \
+			"echo Booting uImage from NAND MTD 'kernel' partition ...; " \
+			"run nandargs; " \
+			"bootm ${loadaddr} - ${fdtaddr}; " \
+		"fi\0" \
+	"loadramdisk=ext4load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
+	"ramdisk=rootfs.ext2.gz.uboot\0" \
+	"ramdisk_size=16384\0" \
+	"ramroot=/dev/ram rw\0" \
+	"ramrootfstype=ext2\0" \
+	"ramargs=run defaultargs; setenv bootargs console=${console} " \
+		"${mtdparts} " \
+		"${defargs} " \
+		"${optargs} " \
+		"root=${ramroot} ramdisk_size=${ramdisk_size} " \
+	 	"rootfstype=${ramrootfstype}\0" \
+	"ramboot=run mmcbootenv; " \
+		"if run loadimage && run loaddtb && run loadramdisk; then " \
+			"echo Booting ${bootdir}/${bootfile} from mmc ${bootpart} w/ramdisk ...; " \
+			"run ramargs; " \
+			"bootz ${loadaddr} ${rdaddr} ${fdtaddr}; " \
+		"fi\0" \
 	BOOTENV
 
 #endif /* __CONFIG_H */