[U-Boot,v2,05/11] sunxi: Add PMIC_AXP kconfig entry

Message ID 1518344340-13672-6-git-send-email-jagan@amarulasolutions.com
State New
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series
  • arm: sunxi: Use proper and meaningful Kconfig entries
Related show

Commit Message

Jagan Teki Feb. 11, 2018, 10:18 a.m.
Add simple and meaningful kconfig option for pmic_bus.c
instead of using MACH type on Makefile.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/mach-sunxi/Kconfig  | 6 ++++++
 arch/arm/mach-sunxi/Makefile | 7 +------
 drivers/power/Kconfig        | 5 +++++
 3 files changed, 12 insertions(+), 6 deletions(-)

Patch

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 7ab1990..62c17c2 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,12 @@  config MFD_SUN6I_PRCM
 	  Support for the PRCM (Power/Reset/Clock Management) unit available
 	  in A31 SoC.
 
+config PMIC_AXP
+	bool "Sunxi AXP PMIC bus access helpers"
+	help
+	  Select this PMIC bus access helpers for Sunxi platform PRCM or other
+	  AXP family PMIC devices.
+
 config SUNXI_RSB
 	bool "Allwinner sunXi Reduced Serial Bus Driver"
 	help
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 8f30979..c2b49ab 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,6 +18,7 @@  obj-y	+= usb_phy.o
 endif
 obj-$(CONFIG_I2C_SUN6I_P2WI)	+= p2wi.o
 obj-$(CONFIG_MFD_SUN6I_PRCM)	+= prcm.o
+obj-$(CONFIG_PMIC_AXP)		+= pmic_bus.o
 obj-$(CONFIG_SUNXI_RSB) 	+= rsb.o
 obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
 obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
@@ -31,12 +32,6 @@  obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
 endif
 obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o gtbus_sun9i.o
 
-obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP809_POWER)	+= pmic_bus.o
-obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
-
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
 obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d8c107e..c004f5a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -22,6 +22,7 @@  config SUNXI_NO_PMIC
 config AXP152_POWER
 	bool "axp152 pmic support"
 	depends on MACH_SUN5I
+	select PMIC_AXP
 	select CMD_POWEROFF
 	---help---
 	Select this to enable support for the axp152 pmic found on most
@@ -30,6 +31,7 @@  config AXP152_POWER
 config AXP209_POWER
 	bool "axp209 pmic support"
 	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+	select PMIC_AXP
 	select CMD_POWEROFF
 	---help---
 	Select this to enable support for the axp209 pmic found on most
@@ -38,6 +40,7 @@  config AXP209_POWER
 config AXP221_POWER
 	bool "axp221 / axp223 pmic support"
 	depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+	select PMIC_AXP
 	select CMD_POWEROFF
 	---help---
 	Select this to enable support for the axp221/axp223 pmic found on most
@@ -46,6 +49,7 @@  config AXP221_POWER
 config AXP809_POWER
 	bool "axp809 pmic support"
 	depends on MACH_SUN9I
+	select PMIC_AXP
 	select CMD_POWEROFF
 	---help---
 	Say y here to enable support for the axp809 pmic found on A80 boards.
@@ -53,6 +57,7 @@  config AXP809_POWER
 config AXP818_POWER
 	bool "axp818 pmic support"
 	depends on MACH_SUN8I_A83T
+	select PMIC_AXP
 	select CMD_POWEROFF
 	---help---
 	Say y here to enable support for the axp818 pmic found on