[U-Boot,v2,02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry

Message ID 1518344340-13672-3-git-send-email-jagan@amarulasolutions.com
State New
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series
  • arm: sunxi: Use proper and meaningful Kconfig entries
Related show

Commit Message

Jagan Teki Feb. 11, 2018, 10:18 a.m.
Add simple and meaningful kconfig option for p2wi.c
instead of using MACH type on Makefile.

p2wi is an I2C controller, so used the same on kconfig
definition.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/mach-sunxi/Kconfig  | 12 ++++++++++++
 arch/arm/mach-sunxi/Makefile |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)

Patch

diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2b9f48b..319bee1 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,17 @@  config SPL_LDSCRIPT
 config IDENT_STRING
 	default " Allwinner Technology"
 
+config I2C_SUN6I_P2WI
+	bool "Allwinner sun6i internal P2WI controller"
+	help
+	  If you say yes to this option, support will be included for the
+	  P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+	  SOCs.
+	  The P2WI looks like an SMBus controller (which supports only byte
+	  accesses), except that it only supports one slave device.
+	  This interface is used to connect to specific PMIC devices (like the
+	  AXP221).
+
 config MFD_SUN6I_PRCM
 	bool "Allwinner A31 PRCM controller"
 	help
@@ -93,6 +104,7 @@  config MACH_SUN6I
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
+	select I2C_SUN6I_P2WI
 	select MFD_SUN6I_PRCM
 	select SUNXI_GEN_SUN6I
 	select SUPPORT_SPL
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 3c1c660..22e73d7 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,10 +16,10 @@  obj-y	+= pinmux.o
 ifndef CONFIG_MACH_SUN9I
 obj-y	+= usb_phy.o
 endif
+obj-$(CONFIG_I2C_SUN6I_P2WI)	+= p2wi.o
 obj-$(CONFIG_MFD_SUN6I_PRCM)	+= prcm.o
 obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
 obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
-obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
 obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
 obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
 obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o