[1/4] dt/bindings: fix binding examples for tegra gmi controller

Message ID 20180210013326.27771-2-marcel@ziswiler.com
State Accepted
Headers show
Series
  • dt/bindings & ARM: dts: tegra: updates
Related show

Commit Message

Marcel Ziswiler Feb. 10, 2018, 1:33 a.m.
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Fix devicetree binding examples for the Generic Memory Interface (GMI)
bus driver found on Tegra SOCs.

While at it also remove double new lines as a left over from Rob's
commit 4da722ca19f3 ("dt-bindings: Remove "status" from examples").

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

Comments

Rob Herring Feb. 18, 2018, 11:52 p.m. | #1
On Sat, Feb 10, 2018 at 02:33:22AM +0100, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> 
> Fix devicetree binding examples for the Generic Memory Interface (GMI)
> bus driver found on Tegra SOCs.
> 
> While at it also remove double new lines as a left over from Rob's
> commit 4da722ca19f3 ("dt-bindings: Remove "status" from examples").
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> ---
> 
>  Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)

Reviewed-by: Rob Herring <robh@kernel.org>

--
To unsubscribe from this list: send the line "unsubscribe linux-tegra" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
index 3e21eb822811..c1e70621799b 100644
--- a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
@@ -73,7 +73,7 @@  Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
 controllers with a simple-bus node since they are all connected to the same
 chip-select (CS4), in this example external address decoding is provided:
 
-gmi@70090000 {
+gmi@70009000 {
 	compatible = "nvidia,tegra20-gmi";
 	reg = <0x70009000 0x1000>;
 	#address-cells = <2>;
@@ -84,7 +84,6 @@  gmi@70090000 {
 	reset-names = "gmi";
 	ranges = <4 0 0xd0000000 0xfffffff>;
 
-
 	bus@4,0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -109,7 +108,7 @@  gmi@70090000 {
 Example with one SJA1000 CAN controller connected to the GMI bus
 on CS4:
 
-gmi@70090000 {
+gmi@70009000 {
 	compatible = "nvidia,tegra20-gmi";
 	reg = <0x70009000 0x1000>;
 	#address-cells = <2>;
@@ -120,7 +119,6 @@  gmi@70090000 {
 	reset-names = "gmi";
 	ranges = <4 0 0xd0000000 0xfffffff>;
 
-
 	can@4,0 {
 		reg = <4 0 0x100>;
 		nvidia,snor-mux-mode;