[v2,05/16] mmc: sdhci-omap: Workaround for Errata i802

Message ID 20180205125029.21570-6-kishon@ti.com
State New
Headers show
Series
  • mmc: sdhci-omap: Add UHS/HS200 mode support
Related show

Commit Message

Kishon Vijay Abraham I Feb. 5, 2018, 12:50 p.m.
Errata i802 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429K July 2014–Revised March 2017 [1]) mentions
DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur
during the tuning procedure and it has to be disabled during the
tuning procedure Implement workaround for Errata i802 here..

[1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-omap.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Patch

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 36e0626d3de2..e24ae903f7ba 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -257,6 +257,7 @@  static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	u32 start_window = 0, max_window = 0;
 	u8 cur_match, prev_match = 0;
 	u32 length = 0, max_len = 0;
+	u32 ier = host->ier;
 	u32 phase_delay = 0;
 	int ret = 0;
 	u32 reg;
@@ -277,6 +278,16 @@  static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	reg |= DLL_SWT;
 	sdhci_omap_writel(omap_host, SDHCI_OMAP_DLL, reg);
 
+	/*
+	 * OMAP5/DRA74X/DRA72x Errata i802:
+	 * DCRC error interrupts (MMCHS_STAT[21] DCRC=0x1) can occur
+	 * during the tuning procedure. So disable it during the
+	 * tuning procedure.
+	 */
+	ier &= ~SDHCI_INT_DATA_CRC;
+	sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+
 	while (phase_delay <= MAX_PHASE_DELAY) {
 		sdhci_omap_set_dll(omap_host, phase_delay);
 
@@ -322,6 +333,8 @@  static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 ret:
 	sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+	sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 	return ret;
 }