diff mbox series

[v2,4/6] clk: sunxi-ng: add support for the Allwinner H6 CCU

Message ID 20180203154942.63566-5-icenowy@aosc.io
State New
Headers show
Series Initial Allwinner H6 support | expand

Commit Message

Icenowy Zheng Feb. 3, 2018, 3:49 p.m. UTC 
The Allwinner H6 SoC has a CCU which has been largely rearranged.

Add support for it in the sunxi-ng CCU framework.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v2:
- Exported APB1 bus clock for PIO.
- Switch to SPDX license identifier.

 .../devicetree/bindings/clock/sunxi-ccu.txt        |    1 +
 drivers/clk/sunxi-ng/Kconfig                       |    5 +
 drivers/clk/sunxi-ng/Makefile                      |    1 +
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c               | 1199 ++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-h6.h               |   57 +
 include/dt-bindings/clock/sun50i-h6-ccu.h          |  125 ++
 include/dt-bindings/reset/sun50i-h6-ccu.h          |   74 ++
 7 files changed, 1462 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.h
 create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
 create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h

Comments

Maxime Ripard Feb. 7, 2018, 9:02 a.m. UTC | #1 
Hi,

On Sat, Feb 03, 2018 at 11:49:40PM +0800, Icenowy Zheng wrote:
> +	/* Force the output divider of video PLLs to 0 */
> +	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
> +		val = readl(reg + pll_video_regs[i]);
> +		val &= ~BIT(0);
> +		writel(val, reg + pll_video_regs[i]);
> +	}

Why?

> +	/* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) */
> +	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
> +		val = readl(reg + usb2_clk_regs[i]);
> +		val &= ~GENMASK(25, 24);
> +		writel (val, reg + usb2_clk_regs[i]);
> +	}

Why?

> +	/*
> +	 * Force the post-divider of pll-video to 8 and the output divider
> +	 * of it to 1.
> +	 */
> +	val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
> +	val &= ~(GENMASK(21, 16) | BIT(0));
> +	writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);

Why?
> diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h
> new file mode 100644
> index 000000000000..f7ddb241012c
> --- /dev/null
> +++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
> @@ -0,0 +1,125 @@
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
> +#define _DT_BINDINGS_CLK_SUN50I_H6_H_
> +
> +#define CLK_PLL_PERIPH0		3

Why is that needed?

> +
> +#define CLK_CPUX		21
> +
> +#define CLK_APB1		26

Same thing here

> +
> +#define CLK_DE			29
> +#define CLK_BUS_DE		30
> +#define CLK_DEINTERLACE		31
> +#define CLK_BUS_DEINTERLACE	32
> +#define CLK_GPU			33
> +#define CLK_BUS_GPU		34
> +#define CLK_CE			35
> +#define CLK_BUS_CE		36
> +#define CLK_VE			37
> +#define CLK_BUS_VE		38
> +#define CLK_EMCE		39
> +#define CLK_BUS_EMCE		40
> +#define CLK_VP9			41
> +#define CLK_BUS_VP9		42
> +#define CLK_BUS_DMA		43
> +#define CLK_BUS_MSGBOX		44
> +#define CLK_BUS_SPINLOCK	45
> +#define CLK_BUS_HSTIMER		46
> +#define CLK_AVS			47
> +#define CLK_BUS_DBG		48
> +#define CLK_BUS_PSI		49
> +#define CLK_BUS_PWM		50
> +#define CLK_BUS_IOMMU		51
> +
> +#define CLK_MBUS_DMA		53
> +#define CLK_MBUS_VE		54
> +#define CLK_MBUS_CE		55
> +#define CLK_MBUS_TS		56
> +#define CLK_MBUS_NAND		57
> +#define CLK_MBUS_CSI		58
> +#define CLK_MBUS_DEINTERLACE	59
> +
> +#define CLK_NAND0		61
> +#define CLK_NAND1		62
> +#define CLK_BUS_NAND		63
> +#define CLK_MMC0		64
> +#define CLK_MMC1		65
> +#define CLK_MMC2		66
> +#define CLK_BUS_MMC0		67
> +#define CLK_BUS_MMC1		68
> +#define CLK_BUS_MMC2		69
> +#define CLK_BUS_UART0		70
> +#define CLK_BUS_UART1		71
> +#define CLK_BUS_UART2		72
> +#define CLK_BUS_UART3		73
> +#define CLK_BUS_I2C0		74
> +#define CLK_BUS_I2C1		75
> +#define CLK_BUS_I2C2		76
> +#define CLK_BUS_I2C3		77
> +#define CLK_BUS_SCR0		78
> +#define CLK_BUS_SCR1		79
> +#define CLK_SPI0		80
> +#define CLK_SPI1		81
> +#define CLK_BUS_SPI0		82
> +#define CLK_BUS_SPI1		83
> +#define CLK_BUS_EMAC		84
> +#define CLK_TS			85
> +#define CLK_BUS_TS		86
> +#define CLK_IR_TX		87
> +#define CLK_BUS_IR_TX		88
> +#define CLK_BUS_THS		89
> +#define CLK_I2S3		90
> +#define CLK_I2S0		91
> +#define CLK_I2S1		92
> +#define CLK_I2S2		93
> +#define CLK_BUS_I2S0		94
> +#define CLK_BUS_I2S1		95
> +#define CLK_BUS_I2S2		96
> +#define CLK_BUS_I2S3		97
> +#define CLK_SPDIF		98
> +#define CLK_BUS_SPDIF		99
> +#define CLK_DMIC		100
> +#define CLK_BUS_DMIC		101
> +#define CLK_AUDIO_HUB		102
> +#define CLK_BUS_AUDIO_HUB	103
> +#define CLK_USB_OHCI0		104
> +#define CLK_USB_PHY0		105
> +#define CLK_USB_PHY1		106
> +#define CLK_USB_OHCI3		107
> +#define CLK_USB_PHY3		108
> +#define CLK_USB_HSIC_12M	109
> +#define CLK_USB_HSIC		110
> +#define CLK_BUS_OHCI0		111
> +#define CLK_BUS_OHCI3		112
> +#define CLK_BUS_EHCI0		113
> +#define CLK_BUS_XHCI		114
> +#define CLK_BUS_EHCI3		115
> +#define CLK_BUS_OTG		116
> +#define CLK_PCIE_REF_100M	117
> +#define CLK_PCIE_REF		118
> +#define CLK_PCIE_REF_OUT	119
> +#define CLK_PCIE_MAXI		120
> +#define CLK_PCIE_AUX		121

Dito.

> +#define CLK_BUS_PCIE		122
> +#define CLK_HDMI		123
> +#define CLK_HDMI_CEC		124
> +#define CLK_BUS_HDMI		125
> +#define CLK_BUS_TCON_TOP	126

Ditto.

Remember, you should only expose here the clocks that devices are
going to use, and remove as much intermediate clocks as possible.

If you're unsure, keep them out of the dt-binding include, we can
always move one to the dt-binding header, while the other way isn't
possible.
Icenowy Zheng Feb. 7, 2018, 9:11 a.m. UTC | #2 
于 2018年2月7日 GMT+08:00 下午5:02:10, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
>Hi,
>
>On Sat, Feb 03, 2018 at 11:49:40PM +0800, Icenowy Zheng wrote:
>> +	/* Force the output divider of video PLLs to 0 */
>> +	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
>> +		val = readl(reg + pll_video_regs[i]);
>> +		val &= ~BIT(0);
>> +		writel(val, reg + pll_video_regs[i]);
>> +	}
>
>Why?

According to the manual the output divider here is
test only, and for daily use it should be 0.

>
>> +	/* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) */
>> +	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
>> +		val = readl(reg + usb2_clk_regs[i]);
>> +		val &= ~GENMASK(25, 24);
>> +		writel (val, reg + usb2_clk_regs[i]);
>> +	}
>
>Why?

Just make them have a sure working parent. Why this
muxs exist is still mysterious.

>
>> +	/*
>> +	 * Force the post-divider of pll-video to 8 and the output divider

oh here's a typo -- it's audio, not video.

>> +	 * of it to 1.
>> +	 */
>> +	val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
>> +	val &= ~(GENMASK(21, 16) | BIT(0));
>> +	writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
>
>Why?

See the comments about pll-audio in the former sources :-)

>> diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h
>b/include/dt-bindings/clock/sun50i-h6-ccu.h
>> new file mode 100644
>> index 000000000000..f7ddb241012c
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
>> @@ -0,0 +1,125 @@
>> +/*
>> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
>> + *
>> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
>> +#define _DT_BINDINGS_CLK_SUN50I_H6_H_
>> +
>> +#define CLK_PLL_PERIPH0		3
>
>Why is that needed?

Parent of AR100 clock in PRCM.

>
>> +
>> +#define CLK_CPUX		21
>> +
>> +#define CLK_APB1		26
>
>Same thing here

As discussed in v1, the APB bus clock is used for PIO.

>
>> +
>> +#define CLK_DE			29
>> +#define CLK_BUS_DE		30
>> +#define CLK_DEINTERLACE		31
>> +#define CLK_BUS_DEINTERLACE	32
>> +#define CLK_GPU			33
>> +#define CLK_BUS_GPU		34
>> +#define CLK_CE			35
>> +#define CLK_BUS_CE		36
>> +#define CLK_VE			37
>> +#define CLK_BUS_VE		38
>> +#define CLK_EMCE		39
>> +#define CLK_BUS_EMCE		40
>> +#define CLK_VP9			41
>> +#define CLK_BUS_VP9		42
>> +#define CLK_BUS_DMA		43
>> +#define CLK_BUS_MSGBOX		44
>> +#define CLK_BUS_SPINLOCK	45
>> +#define CLK_BUS_HSTIMER		46
>> +#define CLK_AVS			47
>> +#define CLK_BUS_DBG		48
>> +#define CLK_BUS_PSI		49
>> +#define CLK_BUS_PWM		50
>> +#define CLK_BUS_IOMMU		51
>> +
>> +#define CLK_MBUS_DMA		53
>> +#define CLK_MBUS_VE		54
>> +#define CLK_MBUS_CE		55
>> +#define CLK_MBUS_TS		56
>> +#define CLK_MBUS_NAND		57
>> +#define CLK_MBUS_CSI		58
>> +#define CLK_MBUS_DEINTERLACE	59
>> +
>> +#define CLK_NAND0		61
>> +#define CLK_NAND1		62
>> +#define CLK_BUS_NAND		63
>> +#define CLK_MMC0		64
>> +#define CLK_MMC1		65
>> +#define CLK_MMC2		66
>> +#define CLK_BUS_MMC0		67
>> +#define CLK_BUS_MMC1		68
>> +#define CLK_BUS_MMC2		69
>> +#define CLK_BUS_UART0		70
>> +#define CLK_BUS_UART1		71
>> +#define CLK_BUS_UART2		72
>> +#define CLK_BUS_UART3		73
>> +#define CLK_BUS_I2C0		74
>> +#define CLK_BUS_I2C1		75
>> +#define CLK_BUS_I2C2		76
>> +#define CLK_BUS_I2C3		77
>> +#define CLK_BUS_SCR0		78
>> +#define CLK_BUS_SCR1		79
>> +#define CLK_SPI0		80
>> +#define CLK_SPI1		81
>> +#define CLK_BUS_SPI0		82
>> +#define CLK_BUS_SPI1		83
>> +#define CLK_BUS_EMAC		84
>> +#define CLK_TS			85
>> +#define CLK_BUS_TS		86
>> +#define CLK_IR_TX		87
>> +#define CLK_BUS_IR_TX		88
>> +#define CLK_BUS_THS		89
>> +#define CLK_I2S3		90
>> +#define CLK_I2S0		91
>> +#define CLK_I2S1		92
>> +#define CLK_I2S2		93
>> +#define CLK_BUS_I2S0		94
>> +#define CLK_BUS_I2S1		95
>> +#define CLK_BUS_I2S2		96
>> +#define CLK_BUS_I2S3		97
>> +#define CLK_SPDIF		98
>> +#define CLK_BUS_SPDIF		99
>> +#define CLK_DMIC		100
>> +#define CLK_BUS_DMIC		101
>> +#define CLK_AUDIO_HUB		102
>> +#define CLK_BUS_AUDIO_HUB	103
>> +#define CLK_USB_OHCI0		104
>> +#define CLK_USB_PHY0		105
>> +#define CLK_USB_PHY1		106
>> +#define CLK_USB_OHCI3		107
>> +#define CLK_USB_PHY3		108
>> +#define CLK_USB_HSIC_12M	109
>> +#define CLK_USB_HSIC		110
>> +#define CLK_BUS_OHCI0		111
>> +#define CLK_BUS_OHCI3		112
>> +#define CLK_BUS_EHCI0		113
>> +#define CLK_BUS_XHCI		114
>> +#define CLK_BUS_EHCI3		115
>> +#define CLK_BUS_OTG		116
>> +#define CLK_PCIE_REF_100M	117
>> +#define CLK_PCIE_REF		118
>> +#define CLK_PCIE_REF_OUT	119
>> +#define CLK_PCIE_MAXI		120
>> +#define CLK_PCIE_AUX		121
>
>Dito.

I think AUX clock is used in PCIe code.

BTW the REF_100M clock is intermediate, and
does't need to be exported. Will fix it in the next version.

>
>> +#define CLK_BUS_PCIE		122
>> +#define CLK_HDMI		123
>> +#define CLK_HDMI_CEC		124
>> +#define CLK_BUS_HDMI		125
>> +#define CLK_BUS_TCON_TOP	126
>
>Ditto.

TCON_TOP is not a clock parent -- it's a dedicated hw
part which controlls the connection between
DE2/3 mixers and TCONs.

>
>Remember, you should only expose here the clocks that devices are
>going to use, and remove as much intermediate clocks as possible.
>
>If you're unsure, keep them out of the dt-binding include, we can
>always move one to the dt-binding header, while the other way isn't
>possible.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Maxime Ripard Feb. 7, 2018, 6:49 p.m. UTC | #3 
On Wed, Feb 07, 2018 at 05:11:11PM +0800, Icenowy Zheng wrote:
> 
> 
> 于 2018年2月7日 GMT+08:00 下午5:02:10, Maxime Ripard <maxime.ripard@bootlin.com> 写到:
> >Hi,
> >
> >On Sat, Feb 03, 2018 at 11:49:40PM +0800, Icenowy Zheng wrote:
> >> +	/* Force the output divider of video PLLs to 0 */
> >> +	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
> >> +		val = readl(reg + pll_video_regs[i]);
> >> +		val &= ~BIT(0);
> >> +		writel(val, reg + pll_video_regs[i]);
> >> +	}
> >
> >Why?
> 
> According to the manual the output divider here is
> test only, and for daily use it should be 0.
> 
> >
> >> +	/* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) */
> >> +	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
> >> +		val = readl(reg + usb2_clk_regs[i]);
> >> +		val &= ~GENMASK(25, 24);
> >> +		writel (val, reg + usb2_clk_regs[i]);
> >> +	}
> >
> >Why?
> 
> Just make them have a sure working parent. Why this
> muxs exist is still mysterious.
> 
> >
> >> +	/*
> >> +	 * Force the post-divider of pll-video to 8 and the output divider
> 
> oh here's a typo -- it's audio, not video.
> 
> >> +	 * of it to 1.
> >> +	 */
> >> +	val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
> >> +	val &= ~(GENMASK(21, 16) | BIT(0));
> >> +	writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
> >
> >Why?
> 
> See the comments about pll-audio in the former sources :-)

You should have a comments for all those :)

> 
> >> diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h
> >b/include/dt-bindings/clock/sun50i-h6-ccu.h
> >> new file mode 100644
> >> index 000000000000..f7ddb241012c
> >> --- /dev/null
> >> +++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
> >> @@ -0,0 +1,125 @@
> >> +/*
> >> + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
> >> + *
> >> + * SPDX-License-Identifier: (GPL-2.0+ or MIT)
> >> + */
> >> +
> >> +#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
> >> +#define _DT_BINDINGS_CLK_SUN50I_H6_H_
> >> +
> >> +#define CLK_PLL_PERIPH0		3
> >
> >Why is that needed?
> 
> Parent of AR100 clock in PRCM.

ACK.

> >
> >> +
> >> +#define CLK_CPUX		21
> >> +
> >> +#define CLK_APB1		26
> >
> >Same thing here
> 
> As discussed in v1, the APB bus clock is used for PIO.

ACK

> >
> >> +
> >> +#define CLK_DE			29
> >> +#define CLK_BUS_DE		30
> >> +#define CLK_DEINTERLACE		31
> >> +#define CLK_BUS_DEINTERLACE	32
> >> +#define CLK_GPU			33
> >> +#define CLK_BUS_GPU		34
> >> +#define CLK_CE			35
> >> +#define CLK_BUS_CE		36
> >> +#define CLK_VE			37
> >> +#define CLK_BUS_VE		38
> >> +#define CLK_EMCE		39
> >> +#define CLK_BUS_EMCE		40
> >> +#define CLK_VP9			41
> >> +#define CLK_BUS_VP9		42
> >> +#define CLK_BUS_DMA		43
> >> +#define CLK_BUS_MSGBOX		44
> >> +#define CLK_BUS_SPINLOCK	45
> >> +#define CLK_BUS_HSTIMER		46
> >> +#define CLK_AVS			47
> >> +#define CLK_BUS_DBG		48
> >> +#define CLK_BUS_PSI		49
> >> +#define CLK_BUS_PWM		50
> >> +#define CLK_BUS_IOMMU		51
> >> +
> >> +#define CLK_MBUS_DMA		53
> >> +#define CLK_MBUS_VE		54
> >> +#define CLK_MBUS_CE		55
> >> +#define CLK_MBUS_TS		56
> >> +#define CLK_MBUS_NAND		57
> >> +#define CLK_MBUS_CSI		58
> >> +#define CLK_MBUS_DEINTERLACE	59
> >> +
> >> +#define CLK_NAND0		61
> >> +#define CLK_NAND1		62
> >> +#define CLK_BUS_NAND		63
> >> +#define CLK_MMC0		64
> >> +#define CLK_MMC1		65
> >> +#define CLK_MMC2		66
> >> +#define CLK_BUS_MMC0		67
> >> +#define CLK_BUS_MMC1		68
> >> +#define CLK_BUS_MMC2		69
> >> +#define CLK_BUS_UART0		70
> >> +#define CLK_BUS_UART1		71
> >> +#define CLK_BUS_UART2		72
> >> +#define CLK_BUS_UART3		73
> >> +#define CLK_BUS_I2C0		74
> >> +#define CLK_BUS_I2C1		75
> >> +#define CLK_BUS_I2C2		76
> >> +#define CLK_BUS_I2C3		77
> >> +#define CLK_BUS_SCR0		78
> >> +#define CLK_BUS_SCR1		79
> >> +#define CLK_SPI0		80
> >> +#define CLK_SPI1		81
> >> +#define CLK_BUS_SPI0		82
> >> +#define CLK_BUS_SPI1		83
> >> +#define CLK_BUS_EMAC		84
> >> +#define CLK_TS			85
> >> +#define CLK_BUS_TS		86
> >> +#define CLK_IR_TX		87
> >> +#define CLK_BUS_IR_TX		88
> >> +#define CLK_BUS_THS		89
> >> +#define CLK_I2S3		90
> >> +#define CLK_I2S0		91
> >> +#define CLK_I2S1		92
> >> +#define CLK_I2S2		93
> >> +#define CLK_BUS_I2S0		94
> >> +#define CLK_BUS_I2S1		95
> >> +#define CLK_BUS_I2S2		96
> >> +#define CLK_BUS_I2S3		97
> >> +#define CLK_SPDIF		98
> >> +#define CLK_BUS_SPDIF		99
> >> +#define CLK_DMIC		100
> >> +#define CLK_BUS_DMIC		101
> >> +#define CLK_AUDIO_HUB		102
> >> +#define CLK_BUS_AUDIO_HUB	103
> >> +#define CLK_USB_OHCI0		104
> >> +#define CLK_USB_PHY0		105
> >> +#define CLK_USB_PHY1		106
> >> +#define CLK_USB_OHCI3		107
> >> +#define CLK_USB_PHY3		108
> >> +#define CLK_USB_HSIC_12M	109
> >> +#define CLK_USB_HSIC		110
> >> +#define CLK_BUS_OHCI0		111
> >> +#define CLK_BUS_OHCI3		112
> >> +#define CLK_BUS_EHCI0		113
> >> +#define CLK_BUS_XHCI		114
> >> +#define CLK_BUS_EHCI3		115
> >> +#define CLK_BUS_OTG		116
> >> +#define CLK_PCIE_REF_100M	117
> >> +#define CLK_PCIE_REF		118
> >> +#define CLK_PCIE_REF_OUT	119
> >> +#define CLK_PCIE_MAXI		120
> >> +#define CLK_PCIE_AUX		121
> >
> >Dito.
> 
> I think AUX clock is used in PCIe code.
> 
> BTW the REF_100M clock is intermediate, and
> does't need to be exported. Will fix it in the next version.
> 
> >
> >> +#define CLK_BUS_PCIE		122
> >> +#define CLK_HDMI		123
> >> +#define CLK_HDMI_CEC		124
> >> +#define CLK_BUS_HDMI		125
> >> +#define CLK_BUS_TCON_TOP	126
> >
> >Ditto.
> 
> TCON_TOP is not a clock parent -- it's a dedicated hw
> part which controlls the connection between
> DE2/3 mixers and TCONs.

Ok, great, thanks!
Maxime
Rob Herring Feb. 8, 2018, 8:18 p.m. UTC | #4 
On Sat, Feb 03, 2018 at 11:49:40PM +0800, Icenowy Zheng wrote:
> The Allwinner H6 SoC has a CCU which has been largely rearranged.
> 
> Add support for it in the sunxi-ng CCU framework.
> 
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> Changes in v2:
> - Exported APB1 bus clock for PIO.
> - Switch to SPDX license identifier.
> 
>  .../devicetree/bindings/clock/sunxi-ccu.txt        |    1 +

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/clk/sunxi-ng/Kconfig                       |    5 +
>  drivers/clk/sunxi-ng/Makefile                      |    1 +
>  drivers/clk/sunxi-ng/ccu-sun50i-h6.c               | 1199 ++++++++++++++++++++
>  drivers/clk/sunxi-ng/ccu-sun50i-h6.h               |   57 +
>  include/dt-bindings/clock/sun50i-h6-ccu.h          |  125 ++
>  include/dt-bindings/reset/sun50i-h6-ccu.h          |   74 ++
>  7 files changed, 1462 insertions(+)
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.c
>  create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h6.h
>  create mode 100644 include/dt-bindings/clock/sun50i-h6-ccu.h
>  create mode 100644 include/dt-bindings/reset/sun50i-h6-ccu.h
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index 4ca21c3a6fc9..9ae27881c924 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -20,6 +20,7 @@  Required properties :
 		- "allwinner,sun50i-a64-ccu"
 		- "allwinner,sun50i-a64-r-ccu"
 		- "allwinner,sun50i-h5-ccu"
+		- "allwinner,sun50i-h6-ccu"
 		- "nextthing,gr8-ccu"
 
 - reg: Must contain the registers base address and length
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 6427d0ebe2de..4bc196a49b12 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -11,6 +11,11 @@  config SUN50I_A64_CCU
 	default ARM64 && ARCH_SUNXI
 	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 
+config SUN50I_H6_CCU
+	bool "Support for the Allwinner H6 CCU"
+	default ARM64 && ARCH_SUNXI
+	depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
 config SUN4I_A10_CCU
 	bool "Support for the Allwinner A10/A20 CCU"
 	select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 4141c3fe08ae..128a40ee5c5e 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -22,6 +22,7 @@  lib-$(CONFIG_SUNXI_CCU)		+= ccu_mp.o
 
 # SoC support
 obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
+obj-$(CONFIG_SUN50I_H6_CCU)	+= ccu-sun50i-h6.o
 obj-$(CONFIG_SUN4I_A10_CCU)	+= ccu-sun4i-a10.o
 obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
new file mode 100644
index 000000000000..03fc96f898d2
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -0,0 +1,1199 @@ 
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h6.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_H6_PLL_CPUX_REG		0x000
+static struct ccu_mult pll_cpux_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.mult		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.common		= {
+		.reg		= 0x000,
+		.hw.init	= CLK_HW_INIT("pll-cpux", "osc24M",
+					      &ccu_mult_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_H6_PLL_DDR0_REG		0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.hw.init	= CLK_HW_INIT("pll-ddr0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_PERIPH0_REG	0x020
+static struct ccu_nkmp pll_periph0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x020,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_PERIPH1_REG	0x028
+static struct ccu_nkmp pll_periph1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x028,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-periph1", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_GPU_REG		0x030
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x030,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_H6_PLL_VIDEO0_REG	0x040
+static struct ccu_nm pll_video0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x040,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video0", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_VIDEO1_REG	0x048
+static struct ccu_nm pll_video1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.fixed_post_div	= 4,
+	.common		= {
+		.reg		= 0x048,
+		.features	= CCU_FEATURE_FIXED_POSTDIV,
+		.hw.init	= CLK_HW_INIT("pll-video1", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_VE_REG		0x058
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x058,
+		.hw.init	= CLK_HW_INIT("pll-ve", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_DE_REG		0x060
+static struct ccu_nkmp pll_de_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x060,
+		.hw.init	= CLK_HW_INIT("pll-de", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+#define SUN50I_H6_PLL_HSIC_REG		0x070
+static struct ccu_nkmp pll_hsic_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 1), /* output divider */
+	.common		= {
+		.reg		= 0x070,
+		.hw.init	= CLK_HW_INIT("pll-hsic", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL is supposed to have 3 outputs: 2 fixed factors from
+ * the base (2x and 4x), and one variable divider (the one true pll audio).
+ *
+ * We don't have any need for the variable divider for now, so we just
+ * hardcode it to match with the clock names.
+ */
+#define SUN50I_H6_PLL_AUDIO_REG		0x078
+static struct ccu_nm pll_audio_base_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(28),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(1, 1), /* input divider */
+	.common		= {
+		.reg		= 0x078,
+		.hw.init	= CLK_HW_INIT("pll-audio-base", "osc24M",
+					      &ccu_nm_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const cpux_parents[] = { "osc24M", "osc32k",
+					     "iosc", "pll-cpux" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+		     0x500, 24, 2, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
+						      "iosc", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+			     psi_ahb1_ahb2_parents,
+			     0x510,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
+						       "psi-ahb1-ahb2",
+						       "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0",
+					     "pll-ddr0", "pll-periph0-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+				       0, 3,	/* M */
+				       24, 2,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+		      0x60c, BIT(0), 0);
+
+static const char * const deinterlace_parents[] = { "pll-periph0",
+						    "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+				       deinterlace_parents,
+				       0x620,
+				       0, 4,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
+		      0x62c, BIT(0), 0);
+
+static const char * const gpu_parents[] = { "pll-gpu" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_clk, "gpu", gpu_parents, 0x670,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+		      0x67c, BIT(0), 0);
+
+/* Also applies to EMCE */
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+		      0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+		      0x69c, BIT(0), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(emce_clk, "emce", ce_parents, 0x6b0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_emce_clk, "bus-emce", "psi-ahb1-ahb2",
+		      0x6bc, BIT(0), 0);
+
+static const char * const vp9_parents[] = { "pll-ve", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(vp9_clk, "vp9", vp9_parents, 0x6c0,
+				       0, 3,	/* M */
+				       24, 1,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_GATE(bus_vp9_clk, "bus-vp9", "psi-ahb1-ahb2",
+		      0x6cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+		      0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "psi-ahb1-ahb2",
+		      0x71c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "psi-ahb1-ahb2",
+		      0x72c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+		      0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+		      0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+		      0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0" };
+static struct ccu_div dram_clk = {
+	.div		= _SUNXI_CCU_DIV(0, 2),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common	= {
+		.reg		= 0x800,
+		.hw.init	= CLK_HW_INIT_PARENTS("dram",
+						      dram_parents,
+						      &ccu_div_ops,
+						      CLK_IS_CRITICAL),
+	},
+};
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+		      0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+		      0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+		      0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
+		      0x804, BIT(3), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+		      0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_csi_clk, "mbus-csi", "mbus",
+		      0x804, BIT(8), 0);
+static SUNXI_CCU_GATE(mbus_deinterlace_clk, "mbus-deinterlace", "mbus",
+		      0x804, BIT(11), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+		      0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
+					     "pll-periph1", "pll-periph0-2x",
+					     "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
+					    "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mmc_parents, 0x830,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mmc_parents, 0x834,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mmc_parents, 0x838,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+
+static SUNXI_CCU_GATE(bus_scr0_clk, "bus-scr0", "apb2", 0x93c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_scr1_clk, "bus-scr1", "apb2", 0x93c, BIT(1), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 3,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+
+static SUNXI_CCU_GATE(bus_emac_clk, "bus-emac", "ahb3", 0x97c, BIT(0), 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
+
+static const char * const ir_tx_parents[] = { "osc32k", "osc24M" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ir_tx_clk, "ir-tx", ir_tx_parents, 0x9c0,
+					0, 4,	/* M */
+					8, 2,	/* N */
+					24, 1,	/* mux */
+					BIT(31),/* gate */
+					0);
+
+static SUNXI_CCU_GATE(bus_ir_tx_clk, "bus-ir-tx", "apb1", 0x9cc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio", "pll-audio-2x", "pll-audio-4x" };
+static struct ccu_div i2s3_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa0c,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s3",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s0_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa10,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s0",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s1_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa14,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s1",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static struct ccu_div i2s2_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa18,
+		.hw.init	= CLK_HW_INIT_PARENTS("i2s2",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb1", 0xa1c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb1", 0xa1c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk, "bus-i2s2", "apb1", 0xa1c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2s3_clk, "bus-i2s3", "apb1", 0xa1c, BIT(3), 0);
+
+static struct ccu_div spdif_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa20,
+		.hw.init	= CLK_HW_INIT_PARENTS("spdif",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa40,
+		.hw.init	= CLK_HW_INIT_PARENTS("dmic",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static struct ccu_div audio_hub_clk = {
+	.enable		= BIT(31),
+	.div		= _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0xa60,
+		.hw.init	= CLK_HW_INIT_PARENTS("audio-hub",
+						      audio_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for 2 USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_H6_USB0_CLK_REG		0xa70
+#define SUN50I_H6_USB3_CLK_REG		0xa7c
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c, BIT(29), 0);
+static SUNXI_CCU_GATE(usb_hsic_12m_clk, "usb-hsic-12M", "osc12M", 0xa7c, BIT(27), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk, "usb-hsic", "pll-hsic", 0xa7c, BIT(26), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_xhci_clk, "bus-xhci", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static CLK_FIXED_FACTOR(pcie_ref_100m_clk, "pcie-ref-100M",
+			"pll-periph0-4x", 24, 1, 0);
+static SUNXI_CCU_GATE(pcie_ref_clk, "pcie-ref", "pcie-ref-100M",
+		      0xab0, BIT(31), 0);
+static SUNXI_CCU_GATE(pcie_ref_out_clk, "pcie-ref-out", "pcie-ref",
+		      0xab0, BIT(30), 0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_maxi_clk, "pcie-maxi",
+			     "pll-periph0", 0xab4,
+			     0, 4,	/* M */
+			     BIT(31),	/* gate */
+			     0);
+
+static SUNXI_CCU_M_WITH_GATE(pcie_aux_clk, "pcie-aux", "osc24M", 0xab8,
+			     0, 5,	/* M */
+			     BIT(31),	/* gate */
+			     0);
+
+static SUNXI_CCU_GATE(bus_pcie_clk, "bus-pcie", "psi-ahb1-ahb2",
+		      0xabc, BIT(0), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video1",
+					      "pll-video1-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
+static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
+	{ .index = 1, .div = 36621 },
+};
+static struct ccu_mux hdmi_cec_clk = {
+	.enable		= BIT(31),
+
+	.mux		= {
+		.shift	= 24,
+		.width	= 2,
+
+		.fixed_predivs	= hdmi_cec_predivs,
+		.n_predivs	= ARRAY_SIZE(hdmi_cec_predivs),
+	},
+
+	.common		= {
+		.reg		= 0xb10,
+		.features	= CCU_FEATURE_VARIABLE_PREDIV,
+		.hw.init	= CLK_HW_INIT_PARENTS("hdmi-cec",
+						      hdmi_cec_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
+		      0xb5c, BIT(0), 0);
+
+static const char * const tcon_lcd0_parents[] = { "pll-video0",
+						  "pll-video0-4x",
+						  "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon_lcd0_clk, "tcon-lcd0",
+			       tcon_lcd0_parents, 0xb60,
+			       24, 3,	/* mux */
+			       BIT(31),	/* gate */
+			       0);
+
+static SUNXI_CCU_GATE(bus_tcon_lcd0_clk, "bus-tcon-lcd0", "ahb3",
+		      0xb7c, BIT(0), 0);
+
+static const char * const tcon_tv0_parents[] = { "pll-video0",
+						 "pll-video0-4x",
+						 "pll-video1",
+						 "pll-video1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
+				  tcon_tv0_parents, 0xb80,
+				  0, 4,		/* M */
+				  8, 2,		/* P */
+				  24, 3,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
+		      0xb9c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(csi_cci_clk, "csi-cci", "osc24M", 0xc00, BIT(0), 0);
+
+static const char * const csi_top_parents[] = { "pll-video0", "pll-ve",
+					      "pll-periph0" };
+static const u8 csi_top_table[] = { 0, 2, 3 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_top_clk, "csi-top",
+				       csi_top_parents, csi_top_table, 0xc04,
+				       0, 4,	/* M */
+				       24, 3,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static const char * const csi_mclk_parents[] = { "osc24M", "pll-video0",
+					       "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(csi_mclk_clk, "csi-mclk",
+				 csi_mclk_parents, 0xc08,
+				 0, 5,		/* M */
+				 24, 3,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb3", 0xc2c, BIT(0), 0);
+
+static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
+				 0, 4,		/* M */
+				 24, 2,		/* mux */
+				 BIT(31),	/* gate */
+				 0);
+
+static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR(osc12M_clk, "osc12M", "osc24M", 2, 1, 0);
+
+/*
+ * The divider of pll-audio is fixed to 8 now, as pll-audio-4x has a
+ * fixed post-divider 2.
+ */
+static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
+			"pll-audio-base", 8, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
+			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
+			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_periph0_4x_clk, "pll-periph0-4x",
+			"pll-periph0", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph0_2x_clk, "pll-periph0-2x",
+			"pll-periph0", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_periph1_4x_clk, "pll-periph1-4x",
+			"pll-periph1", 1, 4, 0);
+static CLK_FIXED_FACTOR(pll_periph1_2x_clk, "pll-periph1-2x",
+			"pll-periph1", 1, 2, 0);
+
+static CLK_FIXED_FACTOR(pll_video0_4x_clk, "pll-video0-4x",
+			"pll-video0", 1, 4, CLK_SET_RATE_PARENT);
+
+static CLK_FIXED_FACTOR(pll_video1_4x_clk, "pll-video1-4x",
+			"pll-video1", 1, 4, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_h6_ccu_clks[] = {
+	&pll_cpux_clk.common,
+	&pll_ddr0_clk.common,
+	&pll_periph0_clk.common,
+	&pll_periph1_clk.common,
+	&pll_gpu_clk.common,
+	&pll_video0_clk.common,
+	&pll_video1_clk.common,
+	&pll_ve_clk.common,
+	&pll_de_clk.common,
+	&pll_hsic_clk.common,
+	&pll_audio_base_clk.common,
+	&cpux_clk.common,
+	&axi_clk.common,
+	&cpux_apb_clk.common,
+	&psi_ahb1_ahb2_clk.common,
+	&ahb3_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&mbus_clk.common,
+	&de_clk.common,
+	&bus_de_clk.common,
+	&deinterlace_clk.common,
+	&bus_deinterlace_clk.common,
+	&gpu_clk.common,
+	&bus_gpu_clk.common,
+	&ce_clk.common,
+	&bus_ce_clk.common,
+	&ve_clk.common,
+	&bus_ve_clk.common,
+	&emce_clk.common,
+	&bus_emce_clk.common,
+	&vp9_clk.common,
+	&bus_vp9_clk.common,
+	&bus_dma_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_hstimer_clk.common,
+	&avs_clk.common,
+	&bus_dbg_clk.common,
+	&bus_psi_clk.common,
+	&bus_pwm_clk.common,
+	&bus_iommu_clk.common,
+	&dram_clk.common,
+	&mbus_dma_clk.common,
+	&mbus_ve_clk.common,
+	&mbus_ce_clk.common,
+	&mbus_ts_clk.common,
+	&mbus_nand_clk.common,
+	&mbus_csi_clk.common,
+	&mbus_deinterlace_clk.common,
+	&bus_dram_clk.common,
+	&nand0_clk.common,
+	&nand1_clk.common,
+	&bus_nand_clk.common,
+	&mmc0_clk.common,
+	&mmc1_clk.common,
+	&mmc2_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_i2c3_clk.common,
+	&bus_scr0_clk.common,
+	&bus_scr1_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_emac_clk.common,
+	&ts_clk.common,
+	&bus_ts_clk.common,
+	&ir_tx_clk.common,
+	&bus_ir_tx_clk.common,
+	&bus_ths_clk.common,
+	&i2s3_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_i2s3_clk.common,
+	&spdif_clk.common,
+	&bus_spdif_clk.common,
+	&dmic_clk.common,
+	&bus_dmic_clk.common,
+	&audio_hub_clk.common,
+	&bus_audio_hub_clk.common,
+	&usb_ohci0_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_ohci3_clk.common,
+	&usb_phy3_clk.common,
+	&usb_hsic_12m_clk.common,
+	&usb_hsic_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ohci3_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_xhci_clk.common,
+	&bus_ehci3_clk.common,
+	&bus_otg_clk.common,
+	&pcie_ref_clk.common,
+	&pcie_ref_out_clk.common,
+	&pcie_maxi_clk.common,
+	&pcie_aux_clk.common,
+	&bus_pcie_clk.common,
+	&hdmi_clk.common,
+	&hdmi_cec_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_tcon_top_clk.common,
+	&tcon_lcd0_clk.common,
+	&bus_tcon_lcd0_clk.common,
+	&tcon_tv0_clk.common,
+	&bus_tcon_tv0_clk.common,
+	&csi_cci_clk.common,
+	&csi_top_clk.common,
+	&csi_mclk_clk.common,
+	&bus_csi_clk.common,
+	&hdcp_clk.common,
+	&bus_hdcp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h6_hw_clks = {
+	.hws	= {
+		[CLK_OSC12M]		= &osc12M_clk.hw,
+		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
+		[CLK_PLL_DDR0]		= &pll_ddr0_clk.common.hw,
+		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
+		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
+		[CLK_PLL_PERIPH0_4X]	= &pll_periph0_4x_clk.hw,
+		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
+		[CLK_PLL_PERIPH1_2X]	= &pll_periph1_2x_clk.hw,
+		[CLK_PLL_PERIPH1_4X]	= &pll_periph1_4x_clk.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VIDEO0_4X]	= &pll_video0_4x_clk.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_PLL_VIDEO1_4X]	= &pll_video1_4x_clk.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_HSIC]		= &pll_hsic_clk.common.hw,
+		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
+		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
+		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
+		[CLK_CPUX]		= &cpux_clk.common.hw,
+		[CLK_AXI]		= &axi_clk.common.hw,
+		[CLK_CPUX_APB]		= &cpux_apb_clk.common.hw,
+		[CLK_PSI_AHB1_AHB2]	= &psi_ahb1_ahb2_clk.common.hw,
+		[CLK_AHB3]		= &ahb3_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_DE]		= &de_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
+		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
+		[CLK_GPU]		= &gpu_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_CE]		= &ce_clk.common.hw,
+		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_EMCE]		= &emce_clk.common.hw,
+		[CLK_BUS_EMCE]		= &bus_emce_clk.common.hw,
+		[CLK_VP9]		= &vp9_clk.common.hw,
+		[CLK_BUS_VP9]		= &bus_vp9_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
+		[CLK_BUS_PSI]		= &bus_psi_clk.common.hw,
+		[CLK_BUS_PWM]		= &bus_pwm_clk.common.hw,
+		[CLK_BUS_IOMMU]		= &bus_iommu_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_MBUS_DMA]		= &mbus_dma_clk.common.hw,
+		[CLK_MBUS_VE]		= &mbus_ve_clk.common.hw,
+		[CLK_MBUS_CE]		= &mbus_ce_clk.common.hw,
+		[CLK_MBUS_TS]		= &mbus_ts_clk.common.hw,
+		[CLK_MBUS_NAND]		= &mbus_nand_clk.common.hw,
+		[CLK_MBUS_CSI]		= &mbus_csi_clk.common.hw,
+		[CLK_MBUS_DEINTERLACE]	= &mbus_deinterlace_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_NAND0]		= &nand0_clk.common.hw,
+		[CLK_NAND1]		= &nand1_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_I2C3]		= &bus_i2c3_clk.common.hw,
+		[CLK_BUS_SCR0]		= &bus_scr0_clk.common.hw,
+		[CLK_BUS_SCR1]		= &bus_scr1_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_TS]		= &ts_clk.common.hw,
+		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
+		[CLK_IR_TX]		= &ir_tx_clk.common.hw,
+		[CLK_BUS_IR_TX]		= &bus_ir_tx_clk.common.hw,
+		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
+		[CLK_I2S3]		= &i2s3_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_I2S3]		= &bus_i2s3_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_DMIC]		= &dmic_clk.common.hw,
+		[CLK_BUS_DMIC]		= &bus_dmic_clk.common.hw,
+		[CLK_AUDIO_HUB]		= &audio_hub_clk.common.hw,
+		[CLK_BUS_AUDIO_HUB]	= &bus_audio_hub_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_OHCI3]		= &usb_ohci3_clk.common.hw,
+		[CLK_USB_PHY3]		= &usb_phy3_clk.common.hw,
+		[CLK_USB_HSIC_12M]	= &usb_hsic_12m_clk.common.hw,
+		[CLK_USB_HSIC]		= &usb_hsic_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_XHCI]		= &bus_xhci_clk.common.hw,
+		[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_PCIE_REF_100M]	= &pcie_ref_100m_clk.hw,
+		[CLK_PCIE_REF]		= &pcie_ref_clk.common.hw,
+		[CLK_PCIE_REF_OUT]	= &pcie_ref_out_clk.common.hw,
+		[CLK_PCIE_MAXI]		= &pcie_maxi_clk.common.hw,
+		[CLK_PCIE_AUX]		= &pcie_aux_clk.common.hw,
+		[CLK_BUS_PCIE]		= &bus_pcie_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_CEC]		= &hdmi_cec_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_TCON_TOP]	= &bus_tcon_top_clk.common.hw,
+		[CLK_TCON_LCD0]		= &tcon_lcd0_clk.common.hw,
+		[CLK_BUS_TCON_LCD0]	= &bus_tcon_lcd0_clk.common.hw,
+		[CLK_TCON_TV0]		= &tcon_tv0_clk.common.hw,
+		[CLK_BUS_TCON_TV0]	= &bus_tcon_tv0_clk.common.hw,
+		[CLK_CSI_CCI]		= &csi_cci_clk.common.hw,
+		[CLK_CSI_TOP]		= &csi_top_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_HDCP]		= &hdcp_clk.common.hw,
+		[CLK_BUS_HDCP]		= &bus_hdcp_clk.common.hw,
+	},
+	.num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h6_ccu_resets[] = {
+	[RST_MBUS]		= { 0x540, BIT(30) },
+
+	[RST_BUS_DE]		= { 0x60c, BIT(16) },
+	[RST_BUS_DEINTERLACE]	= { 0x62c, BIT(16) },
+	[RST_BUS_GPU]		= { 0x67c, BIT(16) },
+	[RST_BUS_CE]		= { 0x68c, BIT(16) },
+	[RST_BUS_VE]		= { 0x69c, BIT(16) },
+	[RST_BUS_EMCE]		= { 0x6bc, BIT(16) },
+	[RST_BUS_VP9]		= { 0x6cc, BIT(16) },
+	[RST_BUS_DMA]		= { 0x70c, BIT(16) },
+	[RST_BUS_MSGBOX]	= { 0x71c, BIT(16) },
+	[RST_BUS_SPINLOCK]	= { 0x72c, BIT(16) },
+	[RST_BUS_HSTIMER]	= { 0x73c, BIT(16) },
+	[RST_BUS_DBG]		= { 0x78c, BIT(16) },
+	[RST_BUS_PSI]		= { 0x79c, BIT(16) },
+	[RST_BUS_PWM]		= { 0x7ac, BIT(16) },
+	[RST_BUS_IOMMU]		= { 0x7bc, BIT(16) },
+	[RST_BUS_DRAM]		= { 0x80c, BIT(16) },
+	[RST_BUS_NAND]		= { 0x82c, BIT(16) },
+	[RST_BUS_MMC0]		= { 0x84c, BIT(16) },
+	[RST_BUS_MMC1]		= { 0x84c, BIT(17) },
+	[RST_BUS_MMC2]		= { 0x84c, BIT(18) },
+	[RST_BUS_UART0]		= { 0x90c, BIT(16) },
+	[RST_BUS_UART1]		= { 0x90c, BIT(17) },
+	[RST_BUS_UART2]		= { 0x90c, BIT(18) },
+	[RST_BUS_UART3]		= { 0x90c, BIT(19) },
+	[RST_BUS_I2C0]		= { 0x91c, BIT(16) },
+	[RST_BUS_I2C1]		= { 0x91c, BIT(17) },
+	[RST_BUS_I2C2]		= { 0x91c, BIT(18) },
+	[RST_BUS_I2C3]		= { 0x91c, BIT(19) },
+	[RST_BUS_SCR0]		= { 0x93c, BIT(16) },
+	[RST_BUS_SCR1]		= { 0x93c, BIT(17) },
+	[RST_BUS_SPI0]		= { 0x96c, BIT(16) },
+	[RST_BUS_SPI1]		= { 0x96c, BIT(17) },
+	[RST_BUS_EMAC]		= { 0x97c, BIT(16) },
+	[RST_BUS_TS]		= { 0x9bc, BIT(16) },
+	[RST_BUS_IR_TX]		= { 0x9cc, BIT(16) },
+	[RST_BUS_THS]		= { 0x9fc, BIT(16) },
+	[RST_BUS_I2S0]		= { 0xa1c, BIT(16) },
+	[RST_BUS_I2S1]		= { 0xa1c, BIT(17) },
+	[RST_BUS_I2S2]		= { 0xa1c, BIT(18) },
+	[RST_BUS_I2S3]		= { 0xa1c, BIT(19) },
+	[RST_BUS_SPDIF]		= { 0xa2c, BIT(16) },
+	[RST_BUS_DMIC]		= { 0xa4c, BIT(16) },
+	[RST_BUS_AUDIO_HUB]	= { 0xa6c, BIT(16) },
+
+	[RST_USB_PHY0]		= { 0xa70, BIT(30) },
+	[RST_USB_PHY1]		= { 0xa74, BIT(30) },
+	[RST_USB_PHY3]		= { 0xa7c, BIT(30) },
+	[RST_USB_HSIC]		= { 0xa7c, BIT(28) },
+
+	[RST_BUS_OHCI0]		= { 0xa8c, BIT(16) },
+	[RST_BUS_OHCI3]		= { 0xa8c, BIT(19) },
+	[RST_BUS_EHCI0]		= { 0xa8c, BIT(20) },
+	[RST_BUS_XHCI]		= { 0xa8c, BIT(21) },
+	[RST_BUS_EHCI3]		= { 0xa8c, BIT(23) },
+	[RST_BUS_OTG]		= { 0xa8c, BIT(24) },
+	[RST_BUS_PCIE]		= { 0xabc, BIT(16) },
+
+	[RST_PCIE_POWERUP]	= { 0xabc, BIT(17) },
+
+	[RST_BUS_HDMI]		= { 0xb1c, BIT(16) },
+	[RST_BUS_HDMI_SUB]	= { 0xb1c, BIT(17) },
+	[RST_BUS_TCON_TOP]	= { 0xb5c, BIT(16) },
+	[RST_BUS_TCON_LCD0]	= { 0xb7c, BIT(16) },
+	[RST_BUS_TCON_TV0]	= { 0xb9c, BIT(16) },
+	[RST_BUS_CSI]		= { 0xc2c, BIT(16) },
+	[RST_BUS_HDCP]		= { 0xc4c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h6_ccu_desc = {
+	.ccu_clks	= sun50i_h6_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun50i_h6_ccu_clks),
+
+	.hw_clks	= &sun50i_h6_hw_clks,
+
+	.resets		= sun50i_h6_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun50i_h6_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+	SUN50I_H6_PLL_CPUX_REG,
+	SUN50I_H6_PLL_DDR0_REG,
+	SUN50I_H6_PLL_PERIPH0_REG,
+	SUN50I_H6_PLL_PERIPH1_REG,
+	SUN50I_H6_PLL_GPU_REG,
+	SUN50I_H6_PLL_VIDEO0_REG,
+	SUN50I_H6_PLL_VIDEO1_REG,
+	SUN50I_H6_PLL_VE_REG,
+	SUN50I_H6_PLL_DE_REG,
+	SUN50I_H6_PLL_HSIC_REG,
+	SUN50I_H6_PLL_AUDIO_REG,
+};
+
+static const u32 pll_video_regs[] = {
+	SUN50I_H6_PLL_VIDEO0_REG,
+	SUN50I_H6_PLL_VIDEO1_REG,
+};
+
+static const u32 usb2_clk_regs[] = {
+	SUN50I_H6_USB0_CLK_REG,
+	SUN50I_H6_USB3_CLK_REG,
+};
+
+static int sun50i_h6_ccu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *reg;
+	u32 val;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Enable the lock bits on all PLLs */
+	for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+		val = readl(reg + pll_regs[i]);
+		val |= BIT(29);
+		writel(val, reg + pll_regs[i]);
+	}
+
+	/* Force the output divider of video PLLs to 0 */
+	for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
+		val = readl(reg + pll_video_regs[i]);
+		val &= ~BIT(0);
+		writel(val, reg + pll_video_regs[i]);
+	}
+
+	/* Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz) */
+	for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
+		val = readl(reg + usb2_clk_regs[i]);
+		val &= ~GENMASK(25, 24);
+		writel (val, reg + usb2_clk_regs[i]);
+	}
+
+	/*
+	 * Force the post-divider of pll-video to 8 and the output divider
+	 * of it to 1.
+	 */
+	val = readl(reg + SUN50I_H6_PLL_AUDIO_REG);
+	val &= ~(GENMASK(21, 16) | BIT(0));
+	writel(val | (7 << 16), reg + SUN50I_H6_PLL_AUDIO_REG);
+
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_h6_ccu_desc);
+}
+
+static const struct of_device_id sun50i_h6_ccu_ids[] = {
+	{ .compatible = "allwinner,sun50i-h6-ccu" },
+	{ }
+};
+
+static struct platform_driver sun50i_h6_ccu_driver = {
+	.probe	= sun50i_h6_ccu_probe,
+	.driver	= {
+		.name	= "sun50i-h6-ccu",
+		.of_match_table	= sun50i_h6_ccu_ids,
+	},
+};
+builtin_platform_driver(sun50i_h6_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.h b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
new file mode 100644
index 000000000000..dd0fae67394e
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.h
@@ -0,0 +1,57 @@ 
+/*
+ * Copyright 2016 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef _CCU_SUN50I_H6_H_
+#define _CCU_SUN50I_H6_H_
+
+#include <dt-bindings/clock/sun50i-h6-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+#define CLK_OSC12M		0
+#define CLK_PLL_CPUX		1
+#define CLK_PLL_DDR0		2
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X	4
+#define CLK_PLL_PERIPH0_4X	5
+#define CLK_PLL_PERIPH1		6
+#define CLK_PLL_PERIPH1_2X	7
+#define CLK_PLL_PERIPH1_4X	8
+#define CLK_PLL_GPU		9
+#define CLK_PLL_VIDEO0		10
+#define CLK_PLL_VIDEO0_4X	11
+#define CLK_PLL_VIDEO1		12
+#define CLK_PLL_VIDEO1_4X	13
+#define CLK_PLL_VE		14
+#define CLK_PLL_DE		15
+#define CLK_PLL_HSIC		16
+#define CLK_PLL_AUDIO_BASE	17
+#define CLK_PLL_AUDIO		18
+#define CLK_PLL_AUDIO_2X	19
+#define CLK_PLL_AUDIO_4X	20
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI			22
+#define CLK_CPUX_APB		23
+#define CLK_PSI_AHB1_AHB2	24
+#define CLK_AHB3		25
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2		27
+#define CLK_MBUS		28
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_DRAM		52
+
+#define CLK_BUS_DRAM		60
+
+#define CLK_NUMBER		137
+
+#endif /* _CCU_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h6-ccu.h b/include/dt-bindings/clock/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..f7ddb241012c
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h6-ccu.h
@@ -0,0 +1,125 @@ 
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ or MIT)
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H6_H_
+#define _DT_BINDINGS_CLK_SUN50I_H6_H_
+
+#define CLK_PLL_PERIPH0		3
+
+#define CLK_CPUX		21
+
+#define CLK_APB1		26
+
+#define CLK_DE			29
+#define CLK_BUS_DE		30
+#define CLK_DEINTERLACE		31
+#define CLK_BUS_DEINTERLACE	32
+#define CLK_GPU			33
+#define CLK_BUS_GPU		34
+#define CLK_CE			35
+#define CLK_BUS_CE		36
+#define CLK_VE			37
+#define CLK_BUS_VE		38
+#define CLK_EMCE		39
+#define CLK_BUS_EMCE		40
+#define CLK_VP9			41
+#define CLK_BUS_VP9		42
+#define CLK_BUS_DMA		43
+#define CLK_BUS_MSGBOX		44
+#define CLK_BUS_SPINLOCK	45
+#define CLK_BUS_HSTIMER		46
+#define CLK_AVS			47
+#define CLK_BUS_DBG		48
+#define CLK_BUS_PSI		49
+#define CLK_BUS_PWM		50
+#define CLK_BUS_IOMMU		51
+
+#define CLK_MBUS_DMA		53
+#define CLK_MBUS_VE		54
+#define CLK_MBUS_CE		55
+#define CLK_MBUS_TS		56
+#define CLK_MBUS_NAND		57
+#define CLK_MBUS_CSI		58
+#define CLK_MBUS_DEINTERLACE	59
+
+#define CLK_NAND0		61
+#define CLK_NAND1		62
+#define CLK_BUS_NAND		63
+#define CLK_MMC0		64
+#define CLK_MMC1		65
+#define CLK_MMC2		66
+#define CLK_BUS_MMC0		67
+#define CLK_BUS_MMC1		68
+#define CLK_BUS_MMC2		69
+#define CLK_BUS_UART0		70
+#define CLK_BUS_UART1		71
+#define CLK_BUS_UART2		72
+#define CLK_BUS_UART3		73
+#define CLK_BUS_I2C0		74
+#define CLK_BUS_I2C1		75
+#define CLK_BUS_I2C2		76
+#define CLK_BUS_I2C3		77
+#define CLK_BUS_SCR0		78
+#define CLK_BUS_SCR1		79
+#define CLK_SPI0		80
+#define CLK_SPI1		81
+#define CLK_BUS_SPI0		82
+#define CLK_BUS_SPI1		83
+#define CLK_BUS_EMAC		84
+#define CLK_TS			85
+#define CLK_BUS_TS		86
+#define CLK_IR_TX		87
+#define CLK_BUS_IR_TX		88
+#define CLK_BUS_THS		89
+#define CLK_I2S3		90
+#define CLK_I2S0		91
+#define CLK_I2S1		92
+#define CLK_I2S2		93
+#define CLK_BUS_I2S0		94
+#define CLK_BUS_I2S1		95
+#define CLK_BUS_I2S2		96
+#define CLK_BUS_I2S3		97
+#define CLK_SPDIF		98
+#define CLK_BUS_SPDIF		99
+#define CLK_DMIC		100
+#define CLK_BUS_DMIC		101
+#define CLK_AUDIO_HUB		102
+#define CLK_BUS_AUDIO_HUB	103
+#define CLK_USB_OHCI0		104
+#define CLK_USB_PHY0		105
+#define CLK_USB_PHY1		106
+#define CLK_USB_OHCI3		107
+#define CLK_USB_PHY3		108
+#define CLK_USB_HSIC_12M	109
+#define CLK_USB_HSIC		110
+#define CLK_BUS_OHCI0		111
+#define CLK_BUS_OHCI3		112
+#define CLK_BUS_EHCI0		113
+#define CLK_BUS_XHCI		114
+#define CLK_BUS_EHCI3		115
+#define CLK_BUS_OTG		116
+#define CLK_PCIE_REF_100M	117
+#define CLK_PCIE_REF		118
+#define CLK_PCIE_REF_OUT	119
+#define CLK_PCIE_MAXI		120
+#define CLK_PCIE_AUX		121
+#define CLK_BUS_PCIE		122
+#define CLK_HDMI		123
+#define CLK_HDMI_CEC		124
+#define CLK_BUS_HDMI		125
+#define CLK_BUS_TCON_TOP	126
+#define CLK_TCON_LCD0		127
+#define CLK_BUS_TCON_LCD0	128
+#define CLK_TCON_TV0		129
+#define CLK_BUS_TCON_TV0	130
+#define CLK_CSI_CCI		131
+#define CLK_CSI_TOP		132
+#define CLK_CSI_MCLK		133
+#define CLK_BUS_CSI		134
+#define CLK_HDCP		135
+#define CLK_BUS_HDCP		136
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H6_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h6-ccu.h b/include/dt-bindings/reset/sun50i-h6-ccu.h
new file mode 100644
index 000000000000..6f684b85434d
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h6-ccu.h
@@ -0,0 +1,74 @@ 
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ or MIT)
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H6_H_
+#define _DT_BINDINGS_RESET_SUN50I_H6_H_
+
+#define RST_MBUS		0
+#define RST_BUS_DE		1
+#define RST_BUS_DEINTERLACE	2
+#define RST_BUS_GPU		3
+#define RST_BUS_CE		4
+#define RST_BUS_VE		5
+#define RST_BUS_EMCE		6
+#define RST_BUS_VP9		7
+#define RST_BUS_DMA		8
+#define RST_BUS_MSGBOX		9
+#define RST_BUS_SPINLOCK	10
+#define RST_BUS_HSTIMER		11
+#define RST_BUS_DBG		12
+#define RST_BUS_PSI		13
+#define RST_BUS_PWM		14
+#define RST_BUS_IOMMU		15
+#define RST_BUS_DRAM		16
+#define RST_BUS_NAND		17
+#define RST_BUS_MMC0		18
+#define RST_BUS_MMC1		19
+#define RST_BUS_MMC2		20
+#define RST_BUS_UART0		21
+#define RST_BUS_UART1		22
+#define RST_BUS_UART2		23
+#define RST_BUS_UART3		24
+#define RST_BUS_I2C0		25
+#define RST_BUS_I2C1		26
+#define RST_BUS_I2C2		27
+#define RST_BUS_I2C3		28
+#define RST_BUS_SCR0		29
+#define RST_BUS_SCR1		30
+#define RST_BUS_SPI0		31
+#define RST_BUS_SPI1		32
+#define RST_BUS_EMAC		33
+#define RST_BUS_TS		34
+#define RST_BUS_IR_TX		35
+#define RST_BUS_THS		36
+#define RST_BUS_I2S0		37
+#define RST_BUS_I2S1		38
+#define RST_BUS_I2S2		39
+#define RST_BUS_I2S3		40
+#define RST_BUS_SPDIF		41
+#define RST_BUS_DMIC		42
+#define RST_BUS_AUDIO_HUB	43
+#define RST_USB_PHY0		44
+#define RST_USB_PHY1		45
+#define RST_USB_PHY3		46
+#define RST_USB_HSIC		47
+#define RST_BUS_OHCI0		48
+#define RST_BUS_OHCI3		49
+#define RST_BUS_EHCI0		50
+#define RST_BUS_XHCI		51
+#define RST_BUS_EHCI3		52
+#define RST_BUS_OTG		53
+#define RST_BUS_PCIE		54
+#define RST_PCIE_POWERUP	55
+#define RST_BUS_HDMI		56
+#define RST_BUS_HDMI_SUB	57
+#define RST_BUS_TCON_TOP	58
+#define RST_BUS_TCON_LCD0	59
+#define RST_BUS_TCON_TV0	60
+#define RST_BUS_CSI		61
+#define RST_BUS_HDCP		62
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H6_H_ */