[v6,6/6] ARM: imx_v6_v7_defconfig: Enable Dialog Semiconductor DA9062 driver

Message ID 1517564044-8706-1-git-send-email-s.riedmueller@phytec.de
State New
Headers show
Series
  • Untitled series #26630
Related show

Commit Message

Stefan Riedmueller Feb. 2, 2018, 9:34 a.m.
The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver.

Enable these options by default.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
Changes in v6:
 - Rebased against imx/defconfig
---
 arch/arm/configs/imx_v6_v7_defconfig | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Shawn Guo Feb. 5, 2018, 9:06 a.m. | #1
On Fri, Feb 02, 2018 at 10:34:04AM +0100, Stefan Riedmueller wrote:
> The phyCORE-i.MX 6 uses the DA9062/63 PMIC, RTC and Watchdog driver.
> 
> Enable these options by default.
> 
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied, thanks.

Patch

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 98c0691..79d63b4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -222,8 +222,10 @@  CONFIG_THERMAL_WRITABLE_TRIPS=y
 CONFIG_CPU_THERMAL=y
 CONFIG_IMX_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_DA9062_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_DA9062=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_STMPE=y
@@ -231,6 +233,7 @@  CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_ANATOP=y
 CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_DA9062=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
@@ -356,6 +359,7 @@  CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_PCF8523=y
 CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_DA9063=y
 CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_RTC_DRV_MXC_V2=y