deleted file mode 100644
@@ -1,300 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_CNS3XXX=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_FORCE=y
-CONFIG_CNS3XXX_ETH=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_V6K=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMA_CACHE_FIQ_BROADCAST=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FIQ=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CNS3XXX=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-# CONFIG_MACH_CNS3420VB is not set
-CONFIG_MACH_GW2388=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_CNS3XXX=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPCORE_WATCHDOG=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_OF_PARTS is not set
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=2
-CONFIG_NTP_PPS=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PPS=y
-CONFIG_PPS_CLIENT_GPIO=y
-CONFIG_RAID_ATTRS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SENSORS_AD7418=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CNS3XXX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_CNS3XXX_EHCI=y
-CONFIG_USB_CNS3XXX_OHCI=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-# CONFIG_USB_DWC2_PCI is not set
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
@@ -389,7 +389,7 @@ static struct plat_serial8250_port laguna_uart_data[] = {
.mapbase = (CNS3XXX_UART0_BASE),
.irq = IRQ_CNS3XXX_UART0,
.iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
.regshift = 2,
.uartclk = 24000000,
.type = PORT_16550A,
@@ -397,7 +397,7 @@ static struct plat_serial8250_port laguna_uart_data[] = {
.mapbase = (CNS3XXX_UART1_BASE),
.irq = IRQ_CNS3XXX_UART1,
.iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
.regshift = 2,
.uartclk = 24000000,
.type = PORT_16550A,
@@ -405,7 +405,7 @@ static struct plat_serial8250_port laguna_uart_data[] = {
.mapbase = (CNS3XXX_UART2_BASE),
.irq = IRQ_CNS3XXX_UART2,
.iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
.regshift = 2,
.uartclk = 24000000,
.type = PORT_16550A,
@@ -712,26 +712,20 @@ static int eth_poll(struct napi_struct *napi, int budget)
}
rx_ring->cur_index = i;
- if (!received) {
- napi_complete(napi);
- enable_irq(sw->rx_irq);
- budget = 0;
- /* If 1 or more frames came in during IRQ enable, re-schedule */
- if (rx_ring->desc[i].cown)
- eth_schedule_poll(sw);
+ cns3xxx_alloc_rx_buf(sw, received);
+ wmb();
+ enable_rx_dma(sw);
+
+ if (received < budget && napi_complete_done(napi, received)) {
+ enable_irq(sw->rx_irq);
}
spin_lock_bh(&tx_lock);
eth_complete_tx(sw);
spin_unlock_bh(&tx_lock);
- cns3xxx_alloc_rx_buf(sw, received);
-
- wmb();
- enable_rx_dma(sw);
-
- return budget;
+ return received;
}
static void eth_set_desc(struct sw *sw, struct _tx_ring *tx_ring, int index,
@@ -856,18 +850,6 @@ static void cns3xxx_get_drvinfo(struct net_device *dev,
strcpy(info->bus_info, "internal");
}
-static int cns3xxx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct port *port = netdev_priv(dev);
- return phy_ethtool_gset(port->phydev, cmd);
-}
-
-static int cns3xxx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-{
- struct port *port = netdev_priv(dev);
- return phy_ethtool_sset(port->phydev, cmd);
-}
-
static int cns3xxx_nway_reset(struct net_device *dev)
{
struct port *port = netdev_priv(dev);
@@ -876,8 +858,8 @@ static int cns3xxx_nway_reset(struct net_device *dev)
static struct ethtool_ops cns3xxx_ethtool_ops = {
.get_drvinfo = cns3xxx_get_drvinfo,
- .get_settings = cns3xxx_get_settings,
- .set_settings = cns3xxx_set_settings,
+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
+ .set_link_ksettings = phy_ethtool_set_link_ksettings,
.nway_reset = cns3xxx_nway_reset,
.get_link = ethtool_op_get_link,
};
@@ -1177,7 +1159,7 @@ static int eth_init_one(struct platform_device *pdev)
goto err_remove_mdio;
}
- strcpy(napi_dev->name, "switch%d");
+ strcpy(napi_dev->name, "cns3xxx_eth");
napi_dev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_FRAGLIST;
SET_NETDEV_DEV(napi_dev, &pdev->dev);
deleted file mode 100644
@@ -1,77 +0,0 @@
---- a/drivers/net/ethernet/cavium/cns3xxx_eth.c
-+++ b/drivers/net/ethernet/cavium/cns3xxx_eth.c
-@@ -712,26 +712,20 @@ static int eth_poll(struct napi_struct *
- }
-
- rx_ring->cur_index = i;
-- if (!received) {
-- napi_complete(napi);
-- enable_irq(sw->rx_irq);
-- budget = 0;
--
-- /* If 1 or more frames came in during IRQ enable, re-schedule */
-- if (rx_ring->desc[i].cown)
-- eth_schedule_poll(sw);
-- }
--
-- spin_lock_bh(&tx_lock);
-- eth_complete_tx(sw);
-- spin_unlock_bh(&tx_lock);
-
- cns3xxx_alloc_rx_buf(sw, received);
--
- wmb();
- enable_rx_dma(sw);
-
-- return budget;
-+ if (received < budget && napi_complete_done(napi, received)) {
-+ enable_irq(sw->rx_irq);
-+ }
-+
-+ spin_lock_bh(&tx_lock);
-+ eth_complete_tx(sw);
-+ spin_unlock_bh(&tx_lock);
-+
-+ return received;
- }
-
- static void eth_set_desc(struct sw *sw, struct _tx_ring *tx_ring, int index,
-@@ -856,18 +850,6 @@ static void cns3xxx_get_drvinfo(struct n
- strcpy(info->bus_info, "internal");
- }
-
--static int cns3xxx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
--{
-- struct port *port = netdev_priv(dev);
-- return phy_ethtool_gset(port->phydev, cmd);
--}
--
--static int cns3xxx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
--{
-- struct port *port = netdev_priv(dev);
-- return phy_ethtool_sset(port->phydev, cmd);
--}
--
- static int cns3xxx_nway_reset(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -876,8 +858,8 @@ static int cns3xxx_nway_reset(struct net
-
- static struct ethtool_ops cns3xxx_ethtool_ops = {
- .get_drvinfo = cns3xxx_get_drvinfo,
-- .get_settings = cns3xxx_get_settings,
-- .set_settings = cns3xxx_set_settings,
-+ .get_link_ksettings = phy_ethtool_get_link_ksettings,
-+ .set_link_ksettings = phy_ethtool_set_link_ksettings,
- .nway_reset = cns3xxx_nway_reset,
- .get_link = ethtool_op_get_link,
- };
-@@ -1177,7 +1159,7 @@ static int eth_init_one(struct platform_
- goto err_remove_mdio;
- }
-
-- strcpy(napi_dev->name, "switch%d");
-+ strcpy(napi_dev->name, "cns3xxx_eth");
- napi_dev->features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_FRAGLIST;
-
- SET_NETDEV_DEV(napi_dev, &pdev->dev);
deleted file mode 100644
@@ -1,29 +0,0 @@
---- a/arch/arm/mach-cns3xxx/laguna.c
-+++ b/arch/arm/mach-cns3xxx/laguna.c
-@@ -389,7 +389,7 @@ static struct plat_serial8250_port lagun
- .mapbase = (CNS3XXX_UART0_BASE),
- .irq = IRQ_CNS3XXX_UART0,
- .iotype = UPIO_MEM,
-- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
- .regshift = 2,
- .uartclk = 24000000,
- .type = PORT_16550A,
-@@ -397,7 +397,7 @@ static struct plat_serial8250_port lagun
- .mapbase = (CNS3XXX_UART1_BASE),
- .irq = IRQ_CNS3XXX_UART1,
- .iotype = UPIO_MEM,
-- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
- .regshift = 2,
- .uartclk = 24000000,
- .type = PORT_16550A,
-@@ -405,7 +405,7 @@ static struct plat_serial8250_port lagun
- .mapbase = (CNS3XXX_UART2_BASE),
- .irq = IRQ_CNS3XXX_UART2,
- .iotype = UPIO_MEM,
-- .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_NO_TXEN_TEST | UPF_IOREMAP,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE | UPF_IOREMAP,
- .regshift = 2,
- .uartclk = 24000000,
- .type = PORT_16550A,
deleted file mode 100644
@@ -1,8 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,3 +1,5 @@
-+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-+
- obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
- cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
deleted file mode 100644
@@ -1,7 +0,0 @@
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -1006,3 +1006,4 @@ eco5_bx2 MACH_ECO5_BX2 ECO5_BX2 4572
- eukrea_cpuimx28sd MACH_EUKREA_CPUIMX28SD EUKREA_CPUIMX28SD 4573
- domotab MACH_DOMOTAB DOMOTAB 4574
- pfla03 MACH_PFLA03 PFLA03 4575
-+gw2388 MACH_GW2388 GW2388 2635
deleted file mode 100644
@@ -1,80 +0,0 @@
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -152,9 +152,15 @@ static inline void nop_dma_unmap_area(co
- #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
- #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
- #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
--#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-
--#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-+# define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-+#else
-+# define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area)
-+# define dmac_flush_range __glue(fiq,_dma_flush_range)
-+#endif
-+
- #endif
-
- #endif
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -873,6 +873,17 @@ config DMA_CACHE_RWFO
- in hardware, other workarounds are needed (e.g. cache
- maintenance broadcasting in software via FIQ).
-
-+config DMA_CACHE_FIQ_BROADCAST
-+ bool "Enable fiq broadcast DMA cache maintenance"
-+ depends on CPU_V6K && SMP
-+ select FIQ
-+ help
-+ The Snoop Control Unit on ARM11MPCore does not detect the
-+ cache maintenance operations and the dma_{map,unmap}_area()
-+ functions may leave stale cache entries on other CPUs. By
-+ enabling this option, fiq broadcast in the ARMv6
-+ DMA cache maintenance functions is performed.
-+
- config OUTER_CACHE
- bool
-
---- a/arch/arm/mm/flush.c
-+++ b/arch/arm/mm/flush.c
-@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval)
- void flush_dcache_page(struct page *page)
- {
- struct address_space *mapping;
-+ bool skip_broadcast = true;
-
- /*
- * The zero page is never written to, so never has any dirty
-@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page
-
- mapping = page_mapping(page);
-
-- if (!cache_ops_need_broadcast() &&
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+ skip_broadcast = !cache_ops_need_broadcast();
-+#endif
-+ if (skip_broadcast &&
- mapping && !page_mapcount(page))
- clear_bit(PG_dcache_clean, &page->flags);
- else {
---- a/arch/arm/mm/dma.h
-+++ b/arch/arm/mm/dma.h
-@@ -4,8 +4,13 @@
- #include <asm/glue-cache.h>
-
- #ifndef MULTI_CACHE
--#define dmac_map_area __glue(_CACHE,_dma_map_area)
--#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define dmac_map_area __glue(_CACHE,_dma_map_area)
-+# define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-+#else
-+# define dmac_map_area __glue(fiq,_dma_map_area)
-+# define dmac_unmap_area __glue(fiq,_dma_unmap_area)
-+#endif
-
- /*
- * These are private to the dma-mapping API. Do not use directly.
deleted file mode 100644
@@ -1,185 +0,0 @@
-Add a watchdog driver for ARM MPcore processors.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -324,6 +324,13 @@ config KS8695_WATCHDOG
- Watchdog timer embedded into KS8695 processor. This will reboot your
- system when the timeout is reached.
-
-+config MPCORE_WATCHDOG
-+ tristate "MPcore watchdog"
-+ depends on HAVE_ARM_TWD
-+ select WATCHDOG_CORE
-+ help
-+ Watchdog timer embedded into the MPcore system
-+
- config HAVE_S3C2410_WATCHDOG
- bool
- help
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -47,6 +47,7 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
- obj-$(CONFIG_977_WATCHDOG) += wdt977.o
- obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
- obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
-+obj-$(CONFIG_MPCORE_WATCHDOG) += mpcore_wdt.o
- obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
- obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
- obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/mpcore_wdt.c
-@@ -0,0 +1,118 @@
-+/*
-+ * Watchdog driver for ARM MPcore
-+ *
-+ * Copyright (C) 2017 Felix Fietkau <nbd@nbd.name>
-+ */
-+
-+#include <linux/export.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <asm/smp_twd.h>
-+
-+static void __iomem *wdt_base;
-+static int wdt_timeout = 60;
-+
-+static int mpcore_wdt_keepalive(struct watchdog_device *wdd)
-+{
-+ static int perturb;
-+ u32 count;
-+
-+ count = (twd_timer_get_rate() / 256) * wdt_timeout;
-+
-+ /* Reload register needs a different value on each refresh */
-+ count += perturb;
-+ perturb = !perturb;
-+
-+ iowrite32(count, wdt_base + TWD_WDOG_LOAD);
-+
-+ return 0;
-+}
-+
-+static int mpcore_wdt_start(struct watchdog_device *wdd)
-+{
-+ mpcore_wdt_keepalive(wdd);
-+
-+ /* prescale = 256, mode = 1, enable = 1 */
-+ iowrite32(0x0000FF09, wdt_base + TWD_WDOG_CONTROL);
-+
-+ return 0;
-+}
-+
-+static int mpcore_wdt_stop(struct watchdog_device *wdd)
-+{
-+ iowrite32(0x12345678, wdt_base + TWD_WDOG_DISABLE);
-+ iowrite32(0x87654321, wdt_base + TWD_WDOG_DISABLE);
-+ iowrite32(0x0, wdt_base + TWD_WDOG_CONTROL);
-+
-+ return 0;
-+}
-+
-+static int mpcore_wdt_set_timeout(struct watchdog_device *wdd,
-+ unsigned int timeout)
-+{
-+ mpcore_wdt_stop(wdd);
-+ wdt_timeout = timeout;
-+ mpcore_wdt_start(wdd);
-+
-+ return 0;
-+}
-+
-+static const struct watchdog_info mpcore_wdt_info = {
-+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-+ .identity = "MPcore Watchdog",
-+};
-+
-+static const struct watchdog_ops mpcore_wdt_ops = {
-+ .owner = THIS_MODULE,
-+ .start = mpcore_wdt_start,
-+ .stop = mpcore_wdt_stop,
-+ .ping = mpcore_wdt_keepalive,
-+ .set_timeout = mpcore_wdt_set_timeout,
-+};
-+
-+static struct watchdog_device mpcore_wdt = {
-+ .info = &mpcore_wdt_info,
-+ .ops = &mpcore_wdt_ops,
-+ .min_timeout = 1,
-+ .max_timeout = 65535,
-+};
-+
-+static int mpcore_wdt_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ unsigned long rate = twd_timer_get_rate();
-+
-+ pr_info("MPCore WD init. clockrate: %u prescaler: %u countrate: %u timeout: %us\n", rate, 256, rate / 256, wdt_timeout);
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!res)
-+ return -ENODEV;
-+
-+ wdt_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(wdt_base))
-+ return PTR_ERR(wdt_base);
-+
-+ watchdog_register_device(&mpcore_wdt);
-+ return 0;
-+}
-+
-+static int mpcore_wdt_remove(struct platform_device *dev)
-+{
-+ watchdog_unregister_device(&mpcore_wdt);
-+ return 0;
-+}
-+
-+static struct platform_driver mpcore_wdt_driver = {
-+ .probe = mpcore_wdt_probe,
-+ .remove = mpcore_wdt_remove,
-+ .driver = {
-+ .name = "mpcore_wdt",
-+ },
-+};
-+
-+module_platform_driver(mpcore_wdt_driver);
-+MODULE_AUTHOR("Felix Fietkau <nbd@nbd.name>");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/include/asm/smp_twd.h
-+++ b/arch/arm/include/asm/smp_twd.h
-@@ -33,5 +33,6 @@ struct twd_local_timer name __initdata =
- };
-
- int twd_local_timer_register(struct twd_local_timer *);
-+unsigned long twd_timer_get_rate(void);
-
- #endif
---- a/arch/arm/kernel/smp_twd.c
-+++ b/arch/arm/kernel/smp_twd.c
-@@ -15,6 +15,7 @@
- #include <linux/delay.h>
- #include <linux/device.h>
- #include <linux/err.h>
-+#include <linux/export.h>
- #include <linux/smp.h>
- #include <linux/jiffies.h>
- #include <linux/clockchips.h>
-@@ -380,6 +381,14 @@ int __init twd_local_timer_register(stru
- return twd_local_timer_common_register(NULL);
- }
-
-+/* Needed by mpcore_wdt */
-+unsigned long twd_timer_get_rate(void)
-+{
-+ return twd_timer_rate;
-+}
-+EXPORT_SYMBOL_GPL(twd_timer_get_rate);
-+
-+
- #ifdef CONFIG_OF
- static int __init twd_local_timer_of_register(struct device_node *np)
- {
deleted file mode 100644
@@ -1,30 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
-+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family"
- depends on ARCH_MULTI_V6
- select ARM_GIC
-+ select HAVE_ARM_SCU if SMP
-+ select HAVE_ARM_TWD
-+ select HAVE_SMP
- help
- Support for Cavium Networks CNS3XXX platform.
-
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -13,6 +13,7 @@
-
- #include <linux/reboot.h>
-
-+extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
-
- #ifdef CONFIG_CACHE_L2X0
deleted file mode 100644
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -281,8 +281,6 @@ void __init cns3xxx_pcie_init_late(void)
- "imprecise external abort");
-
- for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
-- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i));
-- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i));
- cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- private_data = &cns3xxx_pcie[i];
deleted file mode 100644
@@ -1,40 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD
- select HAVE_SMP
-+ select FIQ
- help
- Support for Cavium Networks CNS3XXX platform.
-
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
--cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o
-+cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -261,6 +261,7 @@
- #define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100)
- #define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100)
-
-+#define MISC_FIQ_CPU(x) MISC_MEM_MAP(0xA58 - (x) * 0x4)
- /*
- * Power management and clock control
- */
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -856,7 +856,7 @@ config VDSO
-
- config DMA_CACHE_RWFO
- bool "Enable read/write for ownership DMA cache maintenance"
-- depends on CPU_V6K && SMP
-+ depends on CPU_V6K && SMP && !ARCH_CNS3XXX
- default y
- help
- The Snoop Control Unit on ARM11MPCore does not detect the
deleted file mode 100644
@@ -1,43 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -17,6 +17,7 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <asm/smp_twd.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/map.h>
- #include <asm/mach/time.h>
-@@ -26,6 +27,8 @@
- #include "core.h"
- #include "pm.h"
-
-+#define IRQ_LOCALTIMER 29
-+
- static struct map_desc cns3xxx_io_desc[] __initdata = {
- {
- .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT,
-@@ -198,6 +201,15 @@ static struct irqaction cns3xxx_timer_ir
- .handler = cns3xxx_timer_interrupt,
- };
-
-+static void __init cns3xxx_init_twd(void)
-+{
-+ static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer,
-+ CNS3XXX_TC11MP_TWD_BASE,
-+ IRQ_LOCALTIMER);
-+
-+ twd_local_timer_register(&cns3xx_twd_local_timer);
-+}
-+
- /*
- * Set up the clock source and clock events devices
- */
-@@ -251,6 +263,7 @@ static void __init __cns3xxx_timer_init(
- setup_irq(timer_irq, &cns3xxx_timer_irq);
-
- cns3xxx_clockevents_init(timer_irq);
-+ cns3xxx_init_twd();
- }
-
- void __init cns3xxx_timer_init(void)
deleted file mode 100644
@@ -1,19 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[]
- .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE),
- .length = SZ_16M,
- .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE),
-+ .length = SZ_16M,
-+ .type = MT_DEVICE,
- #endif
- },
- };
deleted file mode 100644
@@ -1,109 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -86,6 +86,79 @@ static void __iomem *cns3xxx_pci_map_bus
- return base + (where & 0xffc) + (devfn << 12);
- }
-
-+static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where)
-+{
-+ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus);
-+
-+ /* check PCI-compatible status register after access */
-+ if (cnspci->linked) {
-+ void __iomem *host_base;
-+ u32 sreg, ereg;
-+
-+ host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+ sreg = __raw_readw(host_base + 0x6) & 0xF900;
-+ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
-+
-+ if (sreg | ereg) {
-+ /* SREG:
-+ * BIT15 - Detected Parity Error
-+ * BIT14 - Signaled System Error
-+ * BIT13 - Received Master Abort
-+ * BIT12 - Received Target Abort
-+ * BIT11 - Signaled Target Abort
-+ * BIT08 - Master Data Parity Error
-+ *
-+ * EREG:
-+ * BIT20 - Unsupported Request
-+ * BIT19 - ECRC
-+ * BIT18 - Malformed TLP
-+ * BIT17 - Receiver Overflow
-+ * BIT16 - Unexpected Completion
-+ * BIT15 - Completer Abort
-+ * BIT14 - Completion Timeout
-+ * BIT13 - Flow Control Protocol Error
-+ * BIT12 - Poisoned TLP
-+ * BIT04 - Data Link Protocol Error
-+ *
-+ * TODO: see Documentation/pci-error-recovery.txt
-+ * implement error_detected handler
-+ */
-+/*
-+ printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg);
-+ if (sreg & BIT(15)) printk(" <PERR");
-+ if (sreg & BIT(14)) printk(" >SERR");
-+ if (sreg & BIT(13)) printk(" <MABRT");
-+ if (sreg & BIT(12)) printk(" <TABRT");
-+ if (sreg & BIT(11)) printk(" >TABRT");
-+ if (sreg & BIT( 8)) printk(" MPERR");
-+
-+ if (ereg & BIT(20)) printk(" Unsup");
-+ if (ereg & BIT(19)) printk(" ECRC");
-+ if (ereg & BIT(18)) printk(" MTLP");
-+ if (ereg & BIT(17)) printk(" OFLOW");
-+ if (ereg & BIT(16)) printk(" Unex");
-+ if (ereg & BIT(15)) printk(" ABRT");
-+ if (ereg & BIT(14)) printk(" COMPTO");
-+ if (ereg & BIT(13)) printk(" FLOW");
-+ if (ereg & BIT(12)) printk(" PTLP");
-+ if (ereg & BIT( 4)) printk(" DLINK");
-+ printk("\n");
-+*/
-+ pr_debug("%s failed port%d sreg=0x%04x\n", __func__,
-+ pci_domain_nr(bus), sreg);
-+
-+ /* make sure the status bits are reset */
-+ __raw_writew(sreg, host_base + 6);
-+ __raw_writel(ereg, host_base + 0x104);
-+ return 1;
-+ }
-+ }
-+ else
-+ return 1;
-+
-+ return 0;
-+}
-+
- static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
- {
-@@ -95,6 +168,11 @@ static int cns3xxx_pci_read_config(struc
-
- ret = pci_generic_config_read32(bus, devfn, where, size, val);
-
-+ if (check_master_abort(bus, devfn, where)) {
-+ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size);
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ }
-+
- if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- (where & 0xffc) == PCI_CLASS_REVISION)
- /*
-@@ -257,8 +335,14 @@ static void __init cns3xxx_pcie_hw_init(
- static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr,
- struct pt_regs *regs)
- {
-+#if 0
-+/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE
-+ * ignore imprecise aborts and use PCI-compatible Status register to
-+ * determine errors instead
-+ */
- if (fsr & (1 << 10))
- regs->ARM_pc += 4;
-+#endif
- return 0;
- }
-
deleted file mode 100644
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -366,6 +366,8 @@ void __init cns3xxx_pcie_init_late(void)
-
- for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
- cns3xxx_pcie_check_link(&cns3xxx_pcie[i]);
-+ if (!cns3xxx_pcie[i].linked)
-+ continue;
- cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]);
- private_data = &cns3xxx_pcie[i];
- pci_common_init(&hw_pci);
deleted file mode 100644
@@ -1,31 +0,0 @@
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -441,6 +441,18 @@ config I2C_CBUS_GPIO
- This driver can also be built as a module. If so, the module
- will be called i2c-cbus-gpio.
-
-+config I2C_CNS3XXX
-+ tristate "Cavium CNS3xxx I2C driver"
-+ depends on ARCH_CNS3XXX
-+ help
-+ Support for Cavium CNS3xxx I2C controller driver.
-+
-+ This driver can also be built as a module. If so, the module
-+ will be called i2c-cns3xxx.
-+
-+ Please note that this driver might be needed to bring up other
-+ devices such as Cavium CNS3xxx Ethernet.
-+
- config I2C_CPM
- tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
- depends on CPM1 || CPM2
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_I2C_VIPERBOARD) += i2c-vipe
- obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
- obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o
- obj-$(CONFIG_I2C_BRCMSTB) += i2c-brcmstb.o
-+obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o
- obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o
- obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
- obj-$(CONFIG_I2C_OPAL) += i2c-opal.o
deleted file mode 100644
@@ -1,51 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -199,6 +199,13 @@ config SPI_CLPS711X
- This enables dedicated general purpose SPI/Microwire1-compatible
- master mode interface (SSI1) for CLPS711X-based CPUs.
-
-+config SPI_CNS3XXX
-+ tristate "CNS3XXX SPI controller"
-+ depends on ARCH_CNS3XXX && SPI_MASTER
-+ select SPI_BITBANG
-+ help
-+ This enables using the CNS3XXX SPI controller in master mode.
-+
- config SPI_COLDFIRE_QSPI
- tristate "Freescale Coldfire QSPI controller"
- depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban
- obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o
- obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o
- obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o
-+obj-$(CONFIG_SPI_CNS3XXX) += spi-cns3xxx.o
- obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o
- obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o
- obj-$(CONFIG_SPI_DLN2) += spi-dln2.o
---- a/include/linux/spi/spi.h
-+++ b/include/linux/spi/spi.h
-@@ -763,6 +763,10 @@ struct spi_transfer {
- u32 speed_hz;
-
- struct list_head transfer_list;
-+
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ unsigned last_in_message_list;
-+#endif
- };
-
- /**
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -985,6 +985,9 @@ static int spi_transfer_one_message(stru
- list_for_each_entry(xfer, &msg->transfers, transfer_list) {
- trace_spi_transfer_start(msg, xfer);
-
-+ xfer->last_in_message_list =
-+ list_is_last(&xfer->transfer_list, &msg->transfers);
-+
- spi_statistics_add_transfer_stats(statm, xfer, master);
- spi_statistics_add_transfer_stats(stats, xfer, master);
-
deleted file mode 100644
@@ -1,26 +0,0 @@
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -37,12 +37,23 @@ static struct scsi_host_template ahci_pl
- AHCI_SHT(DRV_NAME),
- };
-
-+static const struct ata_port_info cns3xxx_port_info = {
-+ .flags = AHCI_FLAG_COMMON,
-+ .pio_mask = ATA_PIO4,
-+ .udma_mask = ATA_UDMA6,
-+ .port_ops = &ahci_pmp_retry_srst_ops,
-+};
-+
- static int ahci_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
- struct ahci_host_priv *hpriv;
-+ const struct ata_port_info *info = &ahci_port_info;
- int rc;
-
-+ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX))
-+ info = &cns3xxx_port_info;
-+
- hpriv = ahci_platform_get_resources(pdev);
- if (IS_ERR(hpriv))
- return PTR_ERR(hpriv);
deleted file mode 100644
@@ -1,103 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -138,6 +138,7 @@ static int cns3xxx_set_oneshot(struct cl
-
- /* period set, and timer enabled in 'next_event' hook */
- ctrl |= (1 << 2) | (1 << 9);
-+ writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
- return 0;
- }
-@@ -148,7 +149,7 @@ static int cns3xxx_set_periodic(struct c
- int pclk = cns3xxx_cpu_clock() / 8;
- int reload;
-
-- reload = pclk * 20 / (3 * HZ) * 0x25000;
-+ reload = pclk * 1000000 / HZ;
- writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
- ctrl |= (1 << 0) | (1 << 2) | (1 << 9);
- writel(ctrl, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-@@ -175,7 +176,7 @@ static struct clock_event_device cns3xxx
- .set_state_oneshot = cns3xxx_set_oneshot,
- .tick_resume = cns3xxx_shutdown,
- .set_next_event = cns3xxx_timer_set_next_event,
-- .rating = 350,
-+ .rating = 300,
- .cpumask = cpu_all_mask,
- };
-
-@@ -220,6 +221,32 @@ static void __init cns3xxx_init_twd(void
- twd_local_timer_register(&cns3xx_twd_local_timer);
- }
-
-+static cycle_t cns3xxx_get_cycles(struct clocksource *cs)
-+{
-+ u64 val;
-+
-+ val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+ val &= 0xffff;
-+
-+ return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET));
-+}
-+
-+static struct clocksource clocksource_cns3xxx = {
-+ .name = "freerun",
-+ .rating = 200,
-+ .read = cns3xxx_get_cycles,
-+ .mask = CLOCKSOURCE_MASK(48),
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
-+
-+static void __init cns3xxx_clocksource_init(void)
-+{
-+ /* Reset the FreeRunning counter */
-+ writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-+
-+ clocksource_register_khz(&clocksource_cns3xxx, 100);
-+}
-+
- /*
- * Set up the clock source and clock events devices
- */
-@@ -237,13 +264,12 @@ static void __init __cns3xxx_timer_init(
- /* stop free running timer3 */
- writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET);
-
-- /* timer1 */
-- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET);
--
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET);
- writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET);
-
-+ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ;
-+ writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET);
-+
- /* mask irq, non-mask timer1 overflow */
- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
- irq_mask &= ~(1 << 2);
-@@ -255,23 +281,9 @@ static void __init __cns3xxx_timer_init(
- val |= (1 << 9);
- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-
-- /* timer2 */
-- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET);
-- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET);
--
-- /* mask irq */
-- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
-- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5));
-- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET);
--
-- /* down counter */
-- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
-- val |= (1 << 10);
-- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET);
--
-- /* Make irqs happen for the system timer */
- setup_irq(timer_irq, &cns3xxx_timer_irq);
-
-+ cns3xxx_clocksource_init();
- cns3xxx_clockevents_init(timer_irq);
- cns3xxx_init_twd();
- }
deleted file mode 100644
@@ -1,41 +0,0 @@
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -162,11 +162,13 @@
- #define CNS3XXX_L2C_BASE 0x92000000 /* L2 Cache Control */
-
- #define CNS3XXX_PCIE0_MEM_BASE 0xA0000000 /* PCIe Port 0 IO/Memory Space */
-+#define CNS3XXX_PCIE0_MEM_BASE_VIRT 0xE0000000
-
- #define CNS3XXX_PCIE0_HOST_BASE 0xAB000000 /* PCIe Port 0 RC Base */
- #define CNS3XXX_PCIE0_HOST_BASE_VIRT 0xE1000000
-
- #define CNS3XXX_PCIE0_IO_BASE 0xAC000000 /* PCIe Port 0 */
-+#define CNS3XXX_PCIE0_IO_BASE_VIRT 0xE2000000
-
- #define CNS3XXX_PCIE0_CFG0_BASE 0xAD000000 /* PCIe Port 0 CFG Type 0 */
- #define CNS3XXX_PCIE0_CFG0_BASE_VIRT 0xE3000000
-@@ -175,13 +177,16 @@
- #define CNS3XXX_PCIE0_CFG1_BASE_VIRT 0xE4000000
-
- #define CNS3XXX_PCIE0_MSG_BASE 0xAF000000 /* PCIe Port 0 Message Space */
-+#define CNS3XXX_PCIE0_MSG_BASE_VIRT 0xE5000000
-
- #define CNS3XXX_PCIE1_MEM_BASE 0xB0000000 /* PCIe Port 1 IO/Memory Space */
-+#define CNS3XXX_PCIE1_MEM_BASE_VIRT 0xE8000000
-
- #define CNS3XXX_PCIE1_HOST_BASE 0xBB000000 /* PCIe Port 1 RC Base */
- #define CNS3XXX_PCIE1_HOST_BASE_VIRT 0xE9000000
-
- #define CNS3XXX_PCIE1_IO_BASE 0xBC000000 /* PCIe Port 1 */
-+#define CNS3XXX_PCIE1_IO_BASE_VIRT 0xEA000000
-
- #define CNS3XXX_PCIE1_CFG0_BASE 0xBD000000 /* PCIe Port 1 CFG Type 0 */
- #define CNS3XXX_PCIE1_CFG0_BASE_VIRT 0xEB000000
-@@ -190,6 +195,7 @@
- #define CNS3XXX_PCIE1_CFG1_BASE_VIRT 0xEC000000
-
- #define CNS3XXX_PCIE1_MSG_BASE 0xBF000000 /* PCIe Port 1 Message Space */
-+#define CNS3XXX_PCIE1_MSG_BASE_VIRT 0xED000000
-
- /*
- * Testchip peripheral and fpga gic regions
deleted file mode 100644
@@ -1,67 +0,0 @@
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -223,6 +223,10 @@ static void __init cns3420_init(void)
-
- cns3xxx_ahci_init();
- cns3xxx_sdhci_init();
-+ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA,
-+ NR_IRQS_CNS3XXX);
-+ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB,
-+ NR_IRQS_CNS3XXX + 32);
-
- pm_power_off = cns3xxx_power_off;
- }
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -2,6 +2,8 @@ menuconfig ARCH_CNS3XXX
- bool "Cavium Networks CNS3XXX family"
- depends on ARCH_MULTI_V6
- select ARM_GIC
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GENERIC_IRQ_CHIP
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD
- select HAVE_SMP
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -1,7 +1,7 @@
- ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
- obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o
--cns3xxx-y += core.o pm.o
-+cns3xxx-y += core.o pm.o gpio.o
- cns3xxx-$(CONFIG_ATAGS) += devices.o
- cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
---- a/arch/arm/mach-cns3xxx/cns3xxx.h
-+++ b/arch/arm/mach-cns3xxx/cns3xxx.h
-@@ -68,8 +68,10 @@
- #define SMC_PCELL_ID_3_OFFSET 0xFFC
-
- #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */
-+#define CNS3XXX_GPIOA_BASE_VIRT 0xFB006000
-
- #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */
-+#define CNS3XXX_GPIOB_BASE_VIRT 0xFB007000
-
- #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */
-
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[]
- .pfn = __phys_to_pfn(CNS3XXX_PM_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOA_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
-+ }, {
-+ .virtual = CNS3XXX_GPIOB_BASE_VIRT,
-+ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE),
-+ .length = SZ_4K,
-+ .type = MT_DEVICE,
- #ifdef CONFIG_PCI
- }, {
- .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT,
deleted file mode 100644
@@ -1,69 +0,0 @@
---- a/arch/arm/mach-cns3xxx/core.c
-+++ b/arch/arm/mach-cns3xxx/core.c
-@@ -307,13 +307,26 @@ void __init cns3xxx_timer_init(void)
-
- #ifdef CONFIG_CACHE_L2X0
-
--void __init cns3xxx_l2x0_init(void)
-+static int cns3xxx_l2x0_enable = 1;
-+
-+static int __init cns3xxx_l2x0_disable(char *s)
-+{
-+ cns3xxx_l2x0_enable = 0;
-+ return 1;
-+}
-+__setup("nol2x0", cns3xxx_l2x0_disable);
-+
-+static int __init cns3xxx_l2x0_init(void)
- {
-- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
-+ void __iomem *base;
- u32 val;
-
-+ if (!cns3xxx_l2x0_enable)
-+ return 0;
-+
-+ base = ioremap(CNS3XXX_L2C_BASE, SZ_4K);
- if (WARN_ON(!base))
-- return;
-+ return 0;
-
- /*
- * Tag RAM Control register
-@@ -343,7 +356,10 @@ void __init cns3xxx_l2x0_init(void)
-
- /* 32 KiB, 8-way, parity disable */
- l2x0_init(base, 0x00500000, 0xfe0f0fff);
-+
-+ return 0;
- }
-+arch_initcall(cns3xxx_l2x0_init);
-
- #endif /* CONFIG_CACHE_L2X0 */
-
---- a/arch/arm/mach-cns3xxx/cns3420vb.c
-+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
-@@ -217,8 +217,6 @@ static struct platform_device *cns3420_p
-
- static void __init cns3420_init(void)
- {
-- cns3xxx_l2x0_init();
--
- platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
-
- cns3xxx_ahci_init();
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -16,12 +16,6 @@
- extern struct smp_operations cns3xxx_smp_ops;
- extern void cns3xxx_timer_init(void);
-
--#ifdef CONFIG_CACHE_L2X0
--void __init cns3xxx_l2x0_init(void);
--#else
--static inline void cns3xxx_l2x0_init(void) {}
--#endif /* CONFIG_CACHE_L2X0 */
--
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
- #else
deleted file mode 100644
@@ -1,46 +0,0 @@
---- a/arch/arm/mach-cns3xxx/Kconfig
-+++ b/arch/arm/mach-cns3xxx/Kconfig
-@@ -22,4 +22,12 @@ config MACH_CNS3420VB
- This is a platform with an on-board ARM11 MPCore and has support
- for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc.
-
-+config MACH_GW2388
-+ bool "Support for Gateworks Laguna Platform"
-+ help
-+ Include support for the Gateworks Laguna Platform
-+
-+ This is a platform with an on-board ARM11 MPCore and has support
-+ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc.
-+
- endif
---- a/arch/arm/mach-cns3xxx/Makefile
-+++ b/arch/arm/mach-cns3xxx/Makefile
-@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o
- cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o
- cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o
- cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-+cns3xxx-$(CONFIG_MACH_GW2388) += laguna.o
-+
---- a/arch/arm/mach-cns3xxx/devices.c
-+++ b/arch/arm/mach-cns3xxx/devices.c
-@@ -16,6 +16,7 @@
- #include <linux/compiler.h>
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
-+#include <asm/mach-types.h>
- #include "cns3xxx.h"
- #include "pm.h"
- #include "core.h"
-@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void)
- u32 gpioa_pins = __raw_readl(gpioa);
-
- /* MMC/SD pins share with GPIOA */
-- gpioa_pins |= 0x1fff0004;
-+ if (machine_is_gw2388()) {
-+ gpioa_pins |= 0x1fff0000;
-+ } else {
-+ gpioa_pins |= 0x1fff0004;
-+ }
- __raw_writel(gpioa_pins, gpioa);
-
- cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
deleted file mode 100644
@@ -1,14 +0,0 @@
---- a/drivers/mmc/host/sdhci-cns3xxx.c
-+++ b/drivers/mmc/host/sdhci-cns3xxx.c
-@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh
- .ops = &sdhci_cns3xxx_ops,
- .quirks = SDHCI_QUIRK_BROKEN_DMA |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-- SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
- SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
-- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
-+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
-+ SDHCI_QUIRK_BROKEN_CARD_DETECTION,
- };
-
- static int sdhci_cns3xxx_probe(struct platform_device *pdev)
deleted file mode 100644
@@ -1,95 +0,0 @@
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -18,6 +18,7 @@
- #include <linux/io.h>
- #include <linux/ioport.h>
- #include <linux/interrupt.h>
-+#include <linux/irq.h>
- #include <linux/ptrace.h>
- #include <asm/mach/map.h>
- #include "cns3xxx.h"
-@@ -27,7 +28,7 @@ struct cns3xxx_pcie {
- void __iomem *host_regs; /* PCI config registers for host bridge */
- void __iomem *cfg0_regs; /* PCI Type 0 config registers */
- void __iomem *cfg1_regs; /* PCI Type 1 config registers */
-- unsigned int irqs[2];
-+ unsigned int irqs[5];
- struct resource res_io;
- struct resource res_mem;
- int port;
-@@ -95,7 +96,7 @@ static inline int check_master_abort(str
- void __iomem *host_base;
- u32 sreg, ereg;
-
-- host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual;
-+ host_base = (void __iomem *) cnspci->host_regs;
- sreg = __raw_readw(host_base + 0x6) & 0xF900;
- ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg
-
-@@ -209,7 +210,7 @@ static struct pci_ops cns3xxx_pcie_ops =
- static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
- {
- struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev);
-- int irq = cnspci->irqs[!!dev->bus->number];
-+ int irq = cnspci->irqs[!!dev->bus->number + pin - 1];
-
- pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n",
- pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn),
-@@ -235,7 +236,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
-- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, },
-+ .irqs = {
-+ IRQ_CNS3XXX_PCIE0_RC,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ IRQ_CNS3XXX_PCIE0_DEVICE,
-+ },
- .port = 0,
- },
- [1] = {
-@@ -254,7 +261,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[
- .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */
- .flags = IORESOURCE_MEM,
- },
-- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, },
-+ .irqs = {
-+ IRQ_CNS3XXX_PCIE1_RC,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ IRQ_CNS3XXX_PCIE1_DEVICE,
-+ },
- .port = 1,
- },
- };
-@@ -346,6 +359,14 @@ static int cns3xxx_pcie_abort_handler(un
- return 0;
- }
-
-+void __init cns3xxx_pcie_set_irqs(int bus, int *irqs)
-+{
-+ int i;
-+
-+ for (i = 0; i < 4; i++)
-+ cns3xxx_pcie[bus].irqs[i + 1] = irqs[i];
-+}
-+
- void __init cns3xxx_pcie_init_late(void)
- {
- int i;
---- a/arch/arm/mach-cns3xxx/core.h
-+++ b/arch/arm/mach-cns3xxx/core.h
-@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void);
-
- #ifdef CONFIG_PCI
- extern void __init cns3xxx_pcie_init_late(void);
-+extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs);
- #else
- static inline void __init cns3xxx_pcie_init_late(void) {}
-+static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {}
- #endif
-
- void __init cns3xxx_map_io(void);
deleted file mode 100644
@@ -1,23 +0,0 @@
---- a/drivers/pci/probe.c
-+++ b/drivers/pci/probe.c
-@@ -2015,7 +2015,8 @@ static void pcie_write_mrrs(struct pci_d
- /* In the "safe" case, do not configure the MRRS. There appear to be
- * issues with setting MRRS to 0 on a number of devices.
- */
-- if (pcie_bus_config != PCIE_BUS_PERFORMANCE)
-+ if (pcie_bus_config != PCIE_BUS_PERFORMANCE &&
-+ pcie_bus_config != PCIE_BUS_PEER2PEER)
- return;
-
- /* For Max performance, the MRRS must be set to the largest supported
---- a/include/linux/pci.h
-+++ b/include/linux/pci.h
-@@ -783,7 +783,7 @@ enum pcie_bus_config_types {
- PCIE_BUS_DEFAULT, /* ensure MPS matches upstream bridge */
- PCIE_BUS_SAFE, /* use largest MPS boot-time devices support */
- PCIE_BUS_PERFORMANCE, /* use MPS and MRRS for best performance */
-- PCIE_BUS_PEER2PEER, /* set MPS = 128 for all devices */
-+ PCIE_BUS_PEER2PEER, /* set MPS and MRSS to 128 for all devices */
- };
-
- extern enum pcie_bus_config_types pcie_bus_config;
deleted file mode 100644
@@ -1,14 +0,0 @@
---- a/drivers/net/phy/broadcom.c
-+++ b/drivers/net/phy/broadcom.c
-@@ -420,6 +420,11 @@ static int bcm5481_config_aneg(struct ph
- /* Write bits 14:0. */
- reg |= (1 << 15);
- phy_write(phydev, 0x18, reg);
-+ } else {
-+ phy_write(phydev, 0x18, 0xf1e7);
-+ phy_write(phydev, 0x1c, 0x8e00);
-+
-+ phy_write(phydev, 0x1c, 0xa41f);
- }
-
- if (of_property_read_bool(np, "enet-phy-lane-swap")) {
deleted file mode 100644
@@ -1,47 +0,0 @@
---- a/drivers/usb/dwc2/platform.c
-+++ b/drivers/usb/dwc2/platform.c
-@@ -308,6 +308,34 @@ static int __dwc2_lowlevel_hw_enable(str
- return ret;
- }
-
-+static const struct dwc2_core_params params_cns3xxx = {
-+ .otg_cap = 2, /* non-HNP/non-SRP capable */
-+ .otg_ver = 0, /* 1.3 */
-+ .dma_enable = 1,
-+ .dma_desc_enable = 0,
-+ .speed = 0, /* High Speed */
-+ .enable_dynamic_fifo = 1,
-+ .en_multiple_tx_fifo = 1,
-+ .host_rx_fifo_size = 658, /* 774 DWORDs */
-+ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */
-+ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */
-+ .max_transfer_size = 65535,
-+ .max_packet_count = 511,
-+ .host_channels = 16,
-+ .phy_type = 1, /* UTMI */
-+ .phy_utmi_width = 16, /* 8 bits */
-+ .phy_ulpi_ddr = 0, /* Single */
-+ .phy_ulpi_ext_vbus = 0,
-+ .i2c_enable = 0,
-+ .ulpi_fs_ls = 0,
-+ .host_support_fs_ls_low_power = 0,
-+ .host_ls_low_power_phy_clk = 0, /* 48 MHz */
-+ .ts_dline = 0,
-+ .reload_ctl = 0,
-+ .ahbcfg = 0x10,
-+ .uframe_sched = 0,
-+};
-+
- /**
- * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
- * @hsotg: The driver state
-@@ -552,6 +580,9 @@ static int dwc2_driver_probe(struct plat
- /* Default all params to autodetect */
- dwc2_set_all_params(&defparams, -1);
- params = &defparams;
-+#ifdef CONFIG_ARCH_CNS3XXX
-+ params = ¶ms_cns3xxx;
-+#endif
-
- /*
- * Disable descriptor dma mode by default as the HW can support
- Remove kernel 4.9 support - Apply specific 4.14 changes directly to source - Refreshed all Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> --- V2: Remove custom 4.14 specific patches by applying them directly to source I'll try to reduce the amount of custom patches even more later on, but this will be done separately as it's outside the scope of this one. target/linux/cns3xxx/config-4.9 | 300 --------------------- .../cns3xxx/files/arch/arm/mach-cns3xxx/laguna.c | 6 +- .../drivers/net/ethernet/cavium/cns3xxx_eth.c | 38 +-- .../140-fix-ethernet-irq-imbalance.patch | 77 ------ .../150-laguna-delete-deprecated-uart-flags.patch | 29 -- .../patches-4.9/000-cns3xxx_arch_include.patch | 8 - .../patches-4.9/001-arm_openwrt_machtypes.patch | 7 - .../010-arm_introduce-dma-fiq-irq-broadcast.patch | 80 ------ .../cns3xxx/patches-4.9/020-watchdog_support.patch | 185 ------------- .../cns3xxx/patches-4.9/025-smp_support.patch | 30 --- .../linux/cns3xxx/patches-4.9/030-pcie_clock.patch | 11 - .../cns3xxx/patches-4.9/040-fiq_support.patch | 40 --- .../linux/cns3xxx/patches-4.9/045-twd_base.patch | 43 --- target/linux/cns3xxx/patches-4.9/055-pcie_io.patch | 19 -- .../linux/cns3xxx/patches-4.9/060-pcie_abort.patch | 109 -------- .../patches-4.9/065-pcie_skip_inactive.patch | 11 - .../cns3xxx/patches-4.9/070-i2c_support.patch | 31 --- .../cns3xxx/patches-4.9/075-spi_support.patch | 51 ---- .../cns3xxx/patches-4.9/080-sata_support.patch | 26 -- target/linux/cns3xxx/patches-4.9/090-timers.patch | 103 ------- .../patches-4.9/093-add-virt-pci-io-mapping.patch | 41 --- .../cns3xxx/patches-4.9/095-gpio_support.patch | 67 ----- .../patches-4.9/097-l2x0_cmdline_disable.patch | 69 ----- .../cns3xxx/patches-4.9/100-laguna_support.patch | 46 ---- .../patches-4.9/101-laguna_sdhci_card_detect.patch | 14 - .../patches-4.9/110-pci_isolated_interrupts.patch | 95 ------- ...ER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch | 23 -- .../patches-4.9/200-broadcom_phy_reinit.patch | 14 - .../cns3xxx/patches-4.9/210-dwc2_defaults.patch | 47 ---- 29 files changed, 13 insertions(+), 1607 deletions(-) delete mode 100644 target/linux/cns3xxx/config-4.9 delete mode 100644 target/linux/cns3xxx/patches-4.14/140-fix-ethernet-irq-imbalance.patch delete mode 100644 target/linux/cns3xxx/patches-4.14/150-laguna-delete-deprecated-uart-flags.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/000-cns3xxx_arch_include.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/001-arm_openwrt_machtypes.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/010-arm_introduce-dma-fiq-irq-broadcast.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/020-watchdog_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/025-smp_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/030-pcie_clock.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/040-fiq_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/045-twd_base.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/055-pcie_io.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/060-pcie_abort.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/065-pcie_skip_inactive.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/070-i2c_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/075-spi_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/080-sata_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/090-timers.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/093-add-virt-pci-io-mapping.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/095-gpio_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/097-l2x0_cmdline_disable.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/100-laguna_support.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/101-laguna_sdhci_card_detect.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/110-pci_isolated_interrupts.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch delete mode 100644 target/linux/cns3xxx/patches-4.9/200-broadcom_phy_reinit.patch delete mode 100644 target/linux/cns3xxx/patches-4.9/210-dwc2_defaults.patch