diff mbox series

[U-Boot,v3,23/24] ARM: DRA7x/AM57x: Add MMC/SD fixups for rev1.0 and rev 1.1

Message ID 1517324513-13875-24-git-send-email-jjhiblot@ti.com
State Accepted
Delegated to: Jaehoon Chung
Headers show
Series omap_hsmmc: Add support for HS200 and UHS modes | expand

Commit Message

Jean-Jacques Hiblot Jan. 30, 2018, 3:01 p.m. UTC 
From: Kishon Vijay Abraham I <kishon@ti.com>

Since DRA7xx/AM57xx SR1.1 and SR1.0 has errata to limit the frequency of
MMC1 to 96MHz and frequency of MMC2 to 48MHz for AM572x SR1.1, limit the
frequency and disable higher speed modes for those revision.
Also use the recommended IO delays (those tagged with "rev11")

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---

Changes in v3: None

 board/ti/am57xx/board.c | 30 ++++++++++++++++++++++++++++++
 board/ti/dra7xx/evm.c   | 29 +++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)
diff mbox series

Patch

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index 1128784..9c1e2ef 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -30,6 +30,7 @@ 
 #include <dwc3-uboot.h>
 #include <dwc3-omap-uboot.h>
 #include <ti-usb-phy-uboot.h>
+#include <mmc.h>
 
 #include "../common/board_detect.h"
 #include "mux_data.h"
@@ -815,6 +816,35 @@  int board_mmc_init(bd_t *bis)
 	omap_mmc_init(1, 0, 0, -1, -1);
 	return 0;
 }
+
+static const struct mmc_platform_fixups am57x_es1_1_mmc1_fixups = {
+	.hw_rev = "rev11",
+	.unsupported_caps = MMC_CAP(MMC_HS_200) |
+			    MMC_CAP(UHS_SDR104),
+	.max_freq = 96000000,
+};
+
+static const struct mmc_platform_fixups am57x_es1_1_mmc23_fixups = {
+	.hw_rev = "rev11",
+	.unsupported_caps = MMC_CAP(MMC_HS_200) |
+			    MMC_CAP(UHS_SDR104) |
+			    MMC_CAP(UHS_SDR50),
+	.max_freq = 48000000,
+};
+
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
+{
+	switch (omap_revision()) {
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+		if (addr == OMAP_HSMMC1_BASE)
+			return &am57x_es1_1_mmc1_fixups;
+		else
+			return &am57x_es1_1_mmc23_fixups;
+	default:
+		return NULL;
+	}
+}
 #endif
 
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 6ecf971..c62724e 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -866,6 +866,35 @@  void board_mmc_poweron_ldo(uint voltage)
 		palmas_mmc1_poweron_ldo(LDO1_VOLTAGE, LDO1_CTRL, voltage);
 	}
 }
+
+static const struct mmc_platform_fixups dra7x_es1_1_mmc1_fixups = {
+	.hw_rev = "rev11",
+	.unsupported_caps = MMC_CAP(MMC_HS_200) |
+			    MMC_CAP(UHS_SDR104),
+	.max_freq = 96000000,
+};
+
+static const struct mmc_platform_fixups dra7x_es1_1_mmc23_fixups = {
+	.hw_rev = "rev11",
+	.unsupported_caps = MMC_CAP(MMC_HS_200) |
+			    MMC_CAP(UHS_SDR104) |
+			    MMC_CAP(UHS_SDR50),
+	.max_freq = 48000000,
+};
+
+const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr)
+{
+	switch (omap_revision()) {
+	case DRA752_ES1_0:
+	case DRA752_ES1_1:
+		if (addr == OMAP_HSMMC1_BASE)
+			return &dra7x_es1_1_mmc1_fixups;
+		else
+			return &dra7x_es1_1_mmc23_fixups;
+	default:
+		return NULL;
+	}
+}
 #endif
 
 #ifdef CONFIG_USB_DWC3