@@ -89,7 +89,7 @@
#define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* tx none, rx unsigned */
#define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */
#define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */
-#define TIPC_CMD_GET_MAX_NODES 0x4009 /* tx none, rx unsigned */
+#define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */
#define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */
#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
@@ -115,7 +115,7 @@
#define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* tx unsigned, rx none */
#define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */
#define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */
-#define TIPC_CMD_SET_MAX_NODES 0x8009 /* tx unsigned, rx none */
+#define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */
#define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */
#define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */
@@ -29,18 +29,6 @@ config TIPC_ADVANCED
Saying Y here will open some advanced configuration for TIPC.
Most users do not need to bother; if unsure, just say N.
-config TIPC_NODES
- int "Maximum number of nodes in a cluster"
- depends on TIPC_ADVANCED
- range 8 2047
- default "255"
- help
- Specifies how many nodes can be supported in a TIPC cluster.
- Can range from 8 to 2047 nodes; default is 255.
-
- Setting this to a smaller value saves some memory;
- setting it to higher allows for more nodes.
-
config TIPC_PORTS
int "Maximum number of ports in a node"
depends on TIPC_ADVANCED
@@ -2,7 +2,7 @@
* net/tipc/addr.c: TIPC address utility routines
*
* Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2004-2005, Wind River Systems
+ * Copyright (c) 2004-2005, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -41,7 +41,7 @@
* tipc_addr_domain_valid - validates a network domain address
*
* Accepts <Z.C.N>, <Z.C.0>, <Z.0.0>, and <0.0.0>,
- * where Z, C, and N are non-zero and do not exceed the configured limits.
+ * where Z, C, and N are non-zero.
*
* Returns 1 if domain address is valid, otherwise 0
*/
@@ -51,10 +51,6 @@ int tipc_addr_domain_valid(u32 addr)
u32 n = tipc_node(addr);
u32 c = tipc_cluster(addr);
u32 z = tipc_zone(addr);
- u32 max_nodes = tipc_max_nodes;
-
- if (n > max_nodes)
- return 0;
if (n && (!z || !c))
return 0;
@@ -66,8 +62,7 @@ int tipc_addr_domain_valid(u32 addr)
/**
* tipc_addr_node_valid - validates a proposed network address for this node
*
- * Accepts <Z.C.N>, where Z, C, and N are non-zero and do not exceed
- * the configured limits.
+ * Accepts <Z.C.N>, where Z, C, and N are non-zero.
*
* Returns 1 if address can be used, otherwise 0
*/
@@ -2,7 +2,7 @@
* net/tipc/config.c: TIPC configuration management code
*
* Copyright (c) 2002-2006, Ericsson AB
- * Copyright (c) 2004-2007, Wind River Systems
+ * Copyright (c) 2004-2007, 2010-2011, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -260,25 +260,6 @@ static struct sk_buff *cfg_set_max_ports(void)
return tipc_cfg_reply_none();
}
-static struct sk_buff *cfg_set_max_nodes(void)
-{
- u32 value;
-
- if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
- return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
- value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
- if (value == tipc_max_nodes)
- return tipc_cfg_reply_none();
- if (value != delimit(value, 8, 2047))
- return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
- " (max nodes must be 8-2047)");
- if (tipc_mode == TIPC_NET_MODE)
- return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
- " (cannot change max nodes once TIPC has joined a network)");
- tipc_max_nodes = value;
- return tipc_cfg_reply_none();
-}
-
static struct sk_buff *cfg_set_netid(void)
{
u32 value;
@@ -397,9 +378,6 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
case TIPC_CMD_SET_MAX_SUBSCR:
rep_tlv_buf = cfg_set_max_subscriptions();
break;
- case TIPC_CMD_SET_MAX_NODES:
- rep_tlv_buf = cfg_set_max_nodes();
- break;
case TIPC_CMD_SET_NETID:
rep_tlv_buf = cfg_set_netid();
break;
@@ -415,9 +393,6 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
case TIPC_CMD_GET_MAX_SUBSCR:
rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_subscriptions);
break;
- case TIPC_CMD_GET_MAX_NODES:
- rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_nodes);
- break;
case TIPC_CMD_GET_NETID:
rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id);
break;
@@ -431,6 +406,8 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
case TIPC_CMD_GET_MAX_SLAVES:
case TIPC_CMD_SET_MAX_CLUSTERS:
case TIPC_CMD_GET_MAX_CLUSTERS:
+ case TIPC_CMD_SET_MAX_NODES:
+ case TIPC_CMD_GET_MAX_NODES:
rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
" (obsolete command)");
break;
@@ -41,10 +41,6 @@
#include "config.h"
-#ifndef CONFIG_TIPC_NODES
-#define CONFIG_TIPC_NODES 255
-#endif
-
#ifndef CONFIG_TIPC_PORTS
#define CONFIG_TIPC_PORTS 8191
#endif
@@ -64,7 +60,6 @@ const char tipc_alphabet[] =
/* configurable TIPC parameters */
u32 tipc_own_addr;
-int tipc_max_nodes;
int tipc_max_ports;
int tipc_max_subscriptions;
int tipc_max_publications;
@@ -192,7 +187,6 @@ static int __init tipc_init(void)
tipc_max_publications = 10000;
tipc_max_subscriptions = 2000;
tipc_max_ports = CONFIG_TIPC_PORTS;
- tipc_max_nodes = CONFIG_TIPC_NODES;
tipc_net_id = 4711;
res = tipc_core_start();
@@ -147,7 +147,6 @@ void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *);
*/
extern u32 tipc_own_addr;
-extern int tipc_max_nodes;
extern int tipc_max_ports;
extern int tipc_max_subscriptions;
extern int tipc_max_publications;
@@ -114,8 +114,7 @@ atomic_t tipc_num_links;
static int net_start(void)
{
- tipc_nodes = kcalloc(tipc_max_nodes + 1,
- sizeof(*tipc_nodes), GFP_ATOMIC);
+ tipc_nodes = kcalloc(4096, sizeof(*tipc_nodes), GFP_ATOMIC);
tipc_highest_node = 0;
atomic_set(&tipc_num_links, 0);