[v2,BUGFIX] ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration

Message ID 1516956738-24673-1-git-send-email-LW@KARO-electronics.de
State New
Headers show
Series
  • [v2,BUGFIX] ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration
Related show

Commit Message

Lothar Waßmann Jan. 26, 2018, 8:52 a.m.
imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
i.MX6ULL SoC which is plain wrong.

Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
Changes vs v1:
 - The newly created .dtsi file was missing

 arch/arm/boot/dts/imx6ul-14x14-evk.dts  | 480 +------------------------------
 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 488 ++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6ull-14x14-evk.dts |   5 +-
 3 files changed, 493 insertions(+), 480 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

Comments

Shawn Guo Feb. 5, 2018, 7:56 a.m. | #1
On Fri, Jan 26, 2018 at 09:52:18AM +0100, Lothar Waßmann wrote:
> imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> i.MX6ULL SoC which is plain wrong.
> 
> Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
> 
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

Which base is the patch generated against?  I cannot apply it to any
branch in my tree.

Shawn
Lothar Waßmann Feb. 5, 2018, 9:55 a.m. | #2
Hi,

On Mon, 5 Feb 2018 15:56:22 +0800 Shawn Guo wrote:
> On Fri, Jan 26, 2018 at 09:52:18AM +0100, Lothar Waßmann wrote:
> > imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> > i.MX6ULL SoC which is plain wrong.
> > 
> > Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> > imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> > include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
> > 
> > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> 
> Which base is the patch generated against?  I cannot apply it to any
> branch in my tree.
>
The patch was generated against next-20180118 but also applies to
next-20180205.


Lothar Waßmann
Shawn Guo Feb. 5, 2018, 10:37 a.m. | #3
On Mon, Feb 05, 2018 at 10:55:43AM +0100, Lothar Waßmann wrote:
> Hi,
> 
> On Mon, 5 Feb 2018 15:56:22 +0800 Shawn Guo wrote:
> > On Fri, Jan 26, 2018 at 09:52:18AM +0100, Lothar Waßmann wrote:
> > > imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> > > i.MX6ULL SoC which is plain wrong.
> > > 
> > > Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> > > imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> > > include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
> > > 
> > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> > 
> > Which base is the patch generated against?  I cannot apply it to any
> > branch in my tree.
> >
> The patch was generated against next-20180118 but also applies to
> next-20180205.

It looks like you would really want this go into 4.16 as a fix?  In that
case, I will need to wait for v4.16-rc1 to apply it.

Shawn
Lothar Waßmann Feb. 5, 2018, 3:03 p.m. | #4
Hi,

On Mon, 5 Feb 2018 18:37:20 +0800 Shawn Guo wrote:
> On Mon, Feb 05, 2018 at 10:55:43AM +0100, Lothar Waßmann wrote:
> > Hi,
> > 
> > On Mon, 5 Feb 2018 15:56:22 +0800 Shawn Guo wrote:
> > > On Fri, Jan 26, 2018 at 09:52:18AM +0100, Lothar Waßmann wrote:
> > > > imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> > > > i.MX6ULL SoC which is plain wrong.
> > > > 
> > > > Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> > > > imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> > > > include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
> > > > 
> > > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> > > 
> > > Which base is the patch generated against?  I cannot apply it to any
> > > branch in my tree.
> > >
> > The patch was generated against next-20180118 but also applies to
> > next-20180205.
> 
> It looks like you would really want this go into 4.16 as a fix?  In that
> case, I will need to wait for v4.16-rc1 to apply it.
> 
I don't care much when and how it will be applied.
I'm not using those files myself.


Lothar Waßmann
Shawn Guo Feb. 8, 2018, 7:09 a.m. | #5
On Fri, Jan 26, 2018 at 09:52:18AM +0100, Lothar Waßmann wrote:
> imx6ull-14x14-evk.dts currently includes the imx6ul.dtsi file for an
> i.MX6ULL SoC which is plain wrong.
> 
> Rename the current imx6ul-14x14-evk.dts to .dtsi and include it from
> imx6ul-14x14-evk.dts and imx6ull-14x14-evk.dts, so that both can
> include the appropriate SoC specific (imx6ul.dtsi/imx6ull.dtsi) file.
> 
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>

Applied, thanks.

Patch

diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
index 18fdb08..6d720b2 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts
@@ -9,487 +9,9 @@ 
 /dts-v1/;
 
 #include "imx6ul.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
 
 / {
 	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
 	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
-
-	chosen {
-		stdout-path = &uart1;
-	};
-
-	memory {
-		reg = <0x80000000 0x20000000>;
-	};
-
-	backlight_display: backlight-display {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
-		brightness-levels = <0 4 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-		status = "okay";
-	};
-
-
-	reg_sd1_vmmc: regulator-sd1-vmmc {
-		compatible = "regulator-fixed";
-		regulator-name = "VSD_3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "mx6ul-wm8960";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&dailink_master>;
-		simple-audio-card,frame-master = <&dailink_master>;
-		simple-audio-card,widgets =
-			"Microphone", "Mic Jack",
-			"Line", "Line In",
-			"Line", "Line Out",
-			"Speaker", "Speaker",
-			"Headphone", "Headphone Jack";
-		simple-audio-card,routing =
-			"Headphone Jack", "HP_L",
-			"Headphone Jack", "HP_R",
-			"Speaker", "SPK_LP",
-			"Speaker", "SPK_LN",
-			"Speaker", "SPK_RP",
-			"Speaker", "SPK_RN",
-			"LINPUT1", "Mic Jack",
-			"LINPUT3", "Mic Jack",
-			"RINPUT1", "Mic Jack",
-			"RINPUT2", "Mic Jack";
-
-		simple-audio-card,cpu {
-			sound-dai = <&sai2>;
-		};
-
-		dailink_master: simple-audio-card,codec {
-			sound-dai = <&codec>;
-			clocks = <&clks IMX6UL_CLK_SAI2>;
-		};
-	};
-
-	panel {
-		compatible = "innolux,at043tn24";
-		backlight = <&backlight_display>;
-
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&display_out>;
-			};
-		};
-	};
-};
-
-&clks {
-	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <786432000>;
-};
-
-&i2c2 {
-	clock_frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	codec: wm8960@1a {
-		#sound-dai-cells = <0>;
-		compatible = "wlf,wm8960";
-		reg = <0x1a>;
-		wlf,shared-lrclk;
-	};
-};
-
-&fec1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet1>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
-};
-
-&fec2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
-	status = "okay";
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy0: ethernet-phy@2 {
-			reg = <2>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET_REF>;
-			clock-names = "rmii-ref";
-		};
-
-		ethphy1: ethernet-phy@1 {
-			reg = <1>;
-			micrel,led-mode = <1>;
-			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
-			clock-names = "rmii-ref";
-		};
-	};
-};
-
-
-&lcdif {
-	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_lcdif_dat
-		     &pinctrl_lcdif_ctrl>;
-	status = "okay";
-
-	port {
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-&pwm1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm1>;
-	status = "okay";
-};
-
-&qspi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_qspi>;
-	status = "okay";
-
-	flash0: n25q256a@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "micron,n25q256a";
-		spi-max-frequency = <29000000>;
-		reg = <0>;
-	};
-};
-
-&sai2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_sai2>;
-	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
-			  <&clks IMX6UL_CLK_SAI2>;
-	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
-	assigned-clock-rates = <0>, <12288000>;
-	fsl,sai-mclk-direction-output;
-	status = "okay";
-};
-
-&snvs_poweroff {
-	status = "okay";
-};
-
-&tsc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_tsc>;
-	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-	measure-delay-time = <0xffff>;
-	pre-charge-time = <0xfff>;
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	uart-has-rtscts;
-	status = "okay";
-};
-
-&usbotg1 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&usbotg2 {
-	dr_mode = "host";
-	disable-over-current;
-	status = "okay";
-};
-
-&usbphy1 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usbphy2 {
-	fsl,tx-d-cal = <106>;
-};
-
-&usdhc1 {
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
-	keep-power-in-suspend;
-	wakeup-source;
-	vmmc-supply = <&reg_sd1_vmmc>;
-	status = "okay";
-};
-
-&usdhc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2>;
-	no-1-8-v;
-	keep-power-in-suspend;
-	wakeup-source;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-
-	pinctrl_csi1: csi1grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
-			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
-			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
-			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
-			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
-			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
-			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
-			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
-			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
-			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
-			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
-			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
-		>;
-	};
-
-	pinctrl_enet1: enet1grp {
-		fsl,pins = <
-			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
-		>;
-	};
-
-	pinctrl_enet2: enet2grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
-			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
-		>;
-	};
-
-	pinctrl_flexcan1: flexcan1grp{
-		fsl,pins = <
-			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
-			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
-		>;
-	};
-
-	pinctrl_flexcan2: flexcan2grp{
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
-			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
-		>;
-	};
-
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
-			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_i2c2: i2c2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
-			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
-		>;
-	};
-
-	pinctrl_lcdif_dat: lcdifdatgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
-			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
-			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
-			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
-			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
-			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
-			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
-			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
-			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
-			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
-			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
-			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
-			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
-			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
-			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
-			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
-			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
-			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
-			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
-			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
-			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
-			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
-			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
-			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
-		>;
-	};
-
-	pinctrl_lcdif_ctrl: lcdifctrlgrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
-			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
-			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
-			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
-			/* used for lcd reset */
-			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
-		>;
-	};
-
-	pinctrl_qspi: qspigrp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
-			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
-			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
-			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
-			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
-			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
-		>;
-	};
-
-	pinctrl_sai2: sai2grp {
-		fsl,pins = <
-			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
-			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
-			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
-			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
-			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
-			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
-		>;
-	};
-
-	pinctrl_pwm1: pwm1grp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
-		>;
-	};
-
-	pinctrl_sim2: sim2grp {
-		fsl,pins = <
-			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
-			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
-			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
-			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
-			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
-			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
-		>;
-	};
-
-	pinctrl_tsc: tscgrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
-			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
-			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
-			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
-		>;
-	};
-
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
-			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
-		>;
-	};
-
-	pinctrl_uart2: uart2grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
-			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
-			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
-			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
-		>;
-	};
-
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
-			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
-			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
-			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
-		>;
-	};
-
-	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
-
-		>;
-	};
-
-	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
-		fsl,pins = <
-			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
-			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
-			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
-			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
-			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
-			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
-		>;
-	};
-
-	pinctrl_usdhc2: usdhc2grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
-			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
-			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
-			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
-			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
-			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
-		>;
-	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
new file mode 100644
index 0000000..a07da87
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -0,0 +1,488 @@ 
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	backlight_display: backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+
+	reg_sd1_vmmc: regulator-sd1-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "mx6ul-wm8960";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX6UL_CLK_SAI2>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at043tn24";
+		backlight = <&backlight_display>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <786432000>;
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		wlf,shared-lrclk;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <1>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+
+&lcdif {
+	assigned-clocks = <&clks IMX6UL_CLK_LCDIF_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL5_VIDEO_DIV>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat
+		     &pinctrl_lcdif_ctrl>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		reg = <0>;
+	};
+};
+
+&sai2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+			  <&clks IMX6UL_CLK_SAI2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <12288000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&tsc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tsc>;
+	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	measure-delay-time = <0xffff>;
+	pre-charge-time = <0xfff>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <106>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi1: csi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
+			MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK	0x1b088
+			MX6UL_PAD_CSI_VSYNC__CSI_VSYNC		0x1b088
+			MX6UL_PAD_CSI_HSYNC__CSI_HSYNC		0x1b088
+			MX6UL_PAD_CSI_DATA00__CSI_DATA02	0x1b088
+			MX6UL_PAD_CSI_DATA01__CSI_DATA03	0x1b088
+			MX6UL_PAD_CSI_DATA02__CSI_DATA04	0x1b088
+			MX6UL_PAD_CSI_DATA03__CSI_DATA05	0x1b088
+			MX6UL_PAD_CSI_DATA04__CSI_DATA06	0x1b088
+			MX6UL_PAD_CSI_DATA05__CSI_DATA07	0x1b088
+			MX6UL_PAD_CSI_DATA06__CSI_DATA08	0x1b088
+			MX6UL_PAD_CSI_DATA07__CSI_DATA09	0x1b088
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp{
+		fsl,pins = <
+			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x1b020
+			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18  0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19  0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20  0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21  0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22  0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23  0x79
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x79
+			/* used for lcd reset */
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09  0x79
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK	0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00	0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01	0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02	0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03	0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B	0x70a1
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK	0x17088
+			MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC	0x17088
+			MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA	0x11088
+			MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA	0x11088
+			MX6UL_PAD_JTAG_TMS__SAI2_MCLK		0x17088
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x17059
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO08__PWM1_OUT   0x110b0
+		>;
+	};
+
+	pinctrl_sim2: sim2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__SIM2_PORT1_PD		0xb808
+			MX6UL_PAD_CSI_DATA04__SIM2_PORT1_CLK		0x31
+			MX6UL_PAD_CSI_DATA05__SIM2_PORT1_RST_B		0xb808
+			MX6UL_PAD_CSI_DATA06__SIM2_PORT1_SVEN		0xb808
+			MX6UL_PAD_CSI_DATA07__SIM2_PORT1_TRXD		0xb809
+			MX6UL_PAD_CSI_DATA02__GPIO4_IO23		0x3008
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01		0xb0
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02		0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03		0xb0
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04		0xb0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS	0x1b0b1
+			MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     	0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     	0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19       0x17059 /* SD1 CD */
+			MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT    0x17059 /* SD1 VSELECT */
+			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-14x14-evk.dts b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
index 4741871..30ef603 100644
--- a/arch/arm/boot/dts/imx6ull-14x14-evk.dts
+++ b/arch/arm/boot/dts/imx6ull-14x14-evk.dts
@@ -39,7 +39,10 @@ 
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "imx6ul-14x14-evk.dts"
+/dts-v1/;
+
+#include "imx6ull.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
 
 / {
 	model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";