diff mbox series

[net-next,3/8] e1000e: Set HTHRESH when PTHRESH is used

Message ID 20180124205520.5811-4-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2018-01-24 | expand

Commit Message

Kirsher, Jeffrey T Jan. 24, 2018, 8:55 p.m. UTC 
From: Matt Turner <matt.turner@intel.com>

According to section 12.0.3.4.13 "Receive Descriptor Control - RXDCTL"
of the Intel® 82579 Gigabit Ethernet PHY Datasheet v2.1:

    "HTHRESH should be given a non zero value when ever PTHRESH is
     used."

In RXDCTL(0), PTHRESH lives at bits 5:0, and HTHREST lives at bits 13:8.
Set only bit 8 of HTHREST as is done in e1000_flush_rx_ring(). Found by
inspection.

Signed-off-by: Matt Turner <matt.turner@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 9f18d39bdc8f..5af93ce5acc6 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3303,7 +3303,7 @@  static void e1000_configure_rx(struct e1000_adapter *adapter)
 		if (adapter->flags & FLAG_IS_ICH) {
 			u32 rxdctl = er32(RXDCTL(0));
 
-			ew32(RXDCTL(0), rxdctl | 0x3);
+			ew32(RXDCTL(0), rxdctl | 0x3 | BIT(8));
 		}
 
 		pm_qos_update_request(&adapter->pm_qos_req, lat);