@@ -1148,6 +1148,8 @@ static const struct net_device_ops xennet_netdev_ops = {
.ndo_change_mtu = xennet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
+ .ndo_fix_features = xennet_fix_features,
+ .ndo_set_features = xennet_set_features,
};
static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev)
@@ -1209,7 +1211,9 @@ static struct net_device * __devinit xennet_create_dev(struct xenbus_device *dev
netdev->netdev_ops = &xennet_netdev_ops;
netif_napi_add(netdev, &np->napi, xennet_poll, 64);
- netdev->features = NETIF_F_IP_CSUM;
+ netdev->features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_GSO_ROBUST;
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_TSO;
SET_ETHTOOL_OPS(netdev, &xennet_ethtool_ops);
SET_NETDEV_DEV(netdev, &dev->dev);
@@ -1510,52 +1514,40 @@ again:
return err;
}
-static int xennet_set_sg(struct net_device *dev, u32 data)
+static u32 xennet_fix_features(struct net_device *dev, u32 features)
{
- if (data) {
- struct netfront_info *np = netdev_priv(dev);
- int val;
+ struct netfront_info *np = netdev_priv(dev);
+ int val;
+ if (features & NETIF_F_SG) {
if (xenbus_scanf(XBT_NIL, np->xbdev->otherend, "feature-sg",
"%d", &val) < 0)
val = 0;
+
if (!val)
- return -ENOSYS;
- } else if (dev->mtu > ETH_DATA_LEN)
- dev->mtu = ETH_DATA_LEN;
-
- return ethtool_op_set_sg(dev, data);
-}
-
-static int xennet_set_tso(struct net_device *dev, u32 data)
-{
- if (data) {
- struct netfront_info *np = netdev_priv(dev);
- int val;
+ features &= ~NETIF_F_SG;
+ }
+ if (features & NETIF_F_TSO) {
if (xenbus_scanf(XBT_NIL, np->xbdev->otherend,
"feature-gso-tcpv4", "%d", &val) < 0)
val = 0;
+
if (!val)
- return -ENOSYS;
+ features &= ~NETIF_F_TSO;
}
- return ethtool_op_set_tso(dev, data);
+ return features;
}
-static void xennet_set_features(struct net_device *dev)
+static int xennet_set_features(struct net_device *dev, u32 features)
{
- /* Turn off all GSO bits except ROBUST. */
- dev->features &= ~NETIF_F_GSO_MASK;
- dev->features |= NETIF_F_GSO_ROBUST;
- xennet_set_sg(dev, 0);
+ if (!(features & NETIF_F_SG) && dev->mtu > ETH_DATA_LEN) {
+ netdev_info(dev, "Reducing MTU because no SG offload");
+ dev->mtu = ETH_DATA_LEN;
+ }
- /* We need checksum offload to enable scatter/gather and TSO. */
- if (!(dev->features & NETIF_F_IP_CSUM))
- return;
-
- if (!xennet_set_sg(dev, 1))
- xennet_set_tso(dev, 1);
+ return 0;
}
static int xennet_connect(struct net_device *dev)
@@ -1582,7 +1574,7 @@ static int xennet_connect(struct net_device *dev)
if (err)
return err;
- xennet_set_features(dev);
+ netdev_update_features(dev);
spin_lock_bh(&np->rx_lock);
spin_lock_irq(&np->tx_lock);
@@ -1710,9 +1702,6 @@ static void xennet_get_strings(struct net_device *dev, u32 stringset, u8 * data)
static const struct ethtool_ops xennet_ethtool_ops =
{
- .set_tx_csum = ethtool_op_set_tx_csum,
- .set_sg = xennet_set_sg,
- .set_tso = xennet_set_tso,
.get_link = ethtool_op_get_link,
.get_sset_count = xennet_get_sset_count,
[resent because of broken headers] This patch converts xen-netfront to hw_features. It's not tested in any way. The original code for offload setting seems broken as it resets the features on every netback reconnect. This will set GSO_ROBUST at device creation time (earlier than connect time). RX checksum offload is forced on - so advertise as it is. netdev_update_features() should be called whenever offload conditions change. This in turn calls ndo_fix_features() and ndo_set_features() to verify them. I leave this to you as I don't know when or how the notifications get passed. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> --- drivers/net/xen-netfront.c | 57 +++++++++++++++++-------------------------- 1 files changed, 23 insertions(+), 34 deletions(-)