| Message ID | 20180117182950.26460-3-l.stach@pengutronix.de |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | None | expand |
On Wed, Jan 17, 2018 at 07:29:49PM +0100, Lucas Stach wrote: > This adds the binding for the i.MX8MQ Clock Controller Module. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > --- > .../devicetree/bindings/clock/imx8mq-clock.txt | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt > > diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt > new file mode 100644 > index 000000000000..c9b0123b80d0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt > @@ -0,0 +1,20 @@ > +* Clock bindings for NXP i.MX8M Quad > + > +Required properties: > +- compatible: Should be "nxp,imx8mq-ccm" > +- reg: Address and length of the register set > +- #clock-cells: Should be <1> > +- clocks: list of clock specifiers, must contain an entry for each required > + entry in clock-names > +- clock-names: should include the following entries: > + - "ckil" > + - "osc_25m" > + - "osc_27m" > + - "clk_ext1" > + - "clk_ext2" > + - "clk_ext3" > + - "clk_ext4" > + > +The clock consumer should specify the desired clock by having the clock > +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h This header belongs in this patch. With that, Reviewed-by: Rob Herring <robh@kernel.org> > +for the full list of i.MX8M Quad clock IDs. > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt new file mode 100644 index 000000000000..c9b0123b80d0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt @@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "nxp,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs.
This adds the binding for the i.MX8MQ Clock Controller Module. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../devicetree/bindings/clock/imx8mq-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt