ARC: ARCv2: CACHE: fix slc_entire_op: flush only instead of flush-n-inv

Message ID 20180117133106.30518-1-Eugeniy.Paltsev@synopsys.com
State New
Headers show
Series
  • ARC: ARCv2: CACHE: fix slc_entire_op: flush only instead of flush-n-inv
Related show

Commit Message

Eugeniy Paltsev Jan. 17, 2018, 1:31 p.m.
As for today slc_entire_op with OP_FLUSH command flush and invalidate
SLC entry instead of flush only. Fix that.

NOTE:
As for today we use slc_entire_op only with OP_FLUSH_N_INV command,
so it is kinda preventiv fix.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
---
 arch/arc/mm/cache.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Patch

diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index 55c3de2..5cb647c 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -787,7 +787,10 @@  noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(r, ctrl);
 
-	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_REG_SLC_FLUSH, 0x1);
 
 	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
 	read_aux_reg(r);