[v3,3/9] doc: dt-bindings: Add doc for Ingenic TCU IRQ driver

Message ID 20180110224838.16711-3-paul@crapouillou.net
State New
Headers show
Series
  • Untitled series #22564
Related show

Commit Message

Paul Cercueil Jan. 10, 2018, 10:48 p.m.
Add documentation about how to properly use the Ingenic TCU
(Timer/Counter Unit) IRQ driver from devicetree.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
 .../bindings/interrupt-controller/ingenic,tcu.txt  | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt

 v3: New patch in this series

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
new file mode 100644
index 000000000000..e3a7d2354172
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ingenic,tcu.txt
@@ -0,0 +1,33 @@ 
+Ingenic SoCs Timer/Counter Unit Interrupt Controller
+
+Required properties:
+
+- compatible : should be "ingenic,<socname>-tcu-intc". Valid strings are:
+  * ingenic,jz4740-tcu-intc
+  * ingenic,jz4770-tcu-intc
+  * ingenic,jz4780-tcu-intc
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+- interrupt-parent : phandle of the interrupt controller.
+- interrupts : Specifies the interrupt the controller is connected to.
+
+Example:
+
+/ {
+	mfd@10002000 {
+		compatible = "ingenic,tcu", "simple-mfd", "syscon";
+		reg = <0x10002000 0x1000>;
+
+		tcu_irq: interrupt-controller {
+			compatible = "ingenic,jz4740-tcu-intc";
+			reg = <0x10002020 0x20>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-parent = <&intc>;
+			interrupts = <15>;
+		};
+	};
+};