| Message ID | 20180110180322.30186-4-hch@lst.de |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [1/4] media/ttusb-budget: remove pci_zalloc_coherent abuse | expand |
On Wed, Jan 10, 2018 at 8:03 PM, Christoph Hellwig <hch@lst.de> wrote: > We need to pass a struct device to the dma API, even if some > architectures still support that for legacy reasons, and should not mix > it with the old PCI dma API. > > Note that the driver also seems to never actually unmap its dma mappings, > but to fix that we'll need someone more familar with the driver. > + struct platform_device *pdev; Do you really need platform_defice reference? Perhaps struct device *hdev; // hardware device data->hdev = &pdev->dev; Another idea dev->dev.parent = &pdev->dev; No new member needed. > }; > > /* Structure for a device driver */ > @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) > data->txskbs[tx] = skb; > > if (i == 0) { > - data->txring[tx].buf0 = dma_map_single(NULL, skb->data, > - skb_headlen(skb), DMA_TO_DEVICE); > + data->txring[tx].buf0 = dma_map_single(&data->pdev->dev, > + skb->data, skb_headlen(skb), > + DMA_TO_DEVICE); > data->txring[tx].len = skb_headlen(skb); > misc |= TSI108_TX_SOF; > } else { > const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; > > - data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag, > - 0, > - skb_frag_size(frag), > - DMA_TO_DEVICE); > + data->txring[tx].buf0 = > + skb_frag_dma_map(&data->pdev->dev, frag, > + 0, skb_frag_size(frag), > + DMA_TO_DEVICE); > data->txring[tx].len = skb_frag_size(frag); > } > > @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget) > if (!skb) > break; > > - data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, > - TSI108_RX_SKB_SIZE, > - DMA_FROM_DEVICE); > + data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev, > + skb->data, TSI108_RX_SKB_SIZE, > + DMA_FROM_DEVICE); > > /* Sometimes the hardware sets blen to zero after packet > * reception, even though the manual says that it's only ever > @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev) > data->id, dev->irq, dev->name); > } > > - data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma, > - GFP_KERNEL); > + data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size, > + &data->rxdma, GFP_KERNEL); > if (!data->rxring) > return -ENOMEM; > > - data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma, > - GFP_KERNEL); > + data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size, > + &data->txdma, GFP_KERNEL); > if (!data->txring) { > - pci_free_consistent(NULL, rxring_size, data->rxring, > + dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring, > data->rxdma); > return -ENOMEM; > } > @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev) > dev_kfree_skb(skb); > } > > - dma_free_coherent(0, > + dma_free_coherent(&data->pdev->dev, > TSI108_RXRING_LEN * sizeof(rx_desc), > data->rxring, data->rxdma); > - dma_free_coherent(0, > + dma_free_coherent(&data->pdev->dev, > TSI108_TXRING_LEN * sizeof(tx_desc), > data->txring, data->txdma); > > @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev) > printk("tsi108_eth%d: probe...\n", pdev->id); > data = netdev_priv(dev); > data->dev = dev; > + data->pdev = pdev; > > pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", > pdev->id, einfo->regs, einfo->phyregs, > -- > 2.14.2 >
On Wed, Jan 10, 2018 at 10:09:20PM +0200, Andy Shevchenko wrote: > > + struct platform_device *pdev; > > Do you really need platform_defice reference? > > Perhaps > > struct device *hdev; // hardware device > > > data->hdev = &pdev->dev; > > Another idea > > dev->dev.parent = &pdev->dev; > > No new member needed. Maybe. But what I've done is the simplest change in a long obsolete driver that I don't understand at all. I'd rather keep it simple.
[+cc David, FYI, I plan to merge this via PCI along with the rest of Christoph's series] On Wed, Jan 10, 2018 at 07:03:21PM +0100, Christoph Hellwig wrote: > We need to pass a struct device to the dma API, even if some > architectures still support that for legacy reasons, and should not mix > it with the old PCI dma API. > > Note that the driver also seems to never actually unmap its dma mappings, > but to fix that we'll need someone more familar with the driver. > > Signed-off-by: Christoph Hellwig <hch@lst.de> > --- > drivers/net/ethernet/tundra/tsi108_eth.c | 36 ++++++++++++++++++-------------- > 1 file changed, 20 insertions(+), 16 deletions(-) > > diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c > index 0624b71ab5d4..edcd1e60b30d 100644 > --- a/drivers/net/ethernet/tundra/tsi108_eth.c > +++ b/drivers/net/ethernet/tundra/tsi108_eth.c > @@ -152,6 +152,8 @@ struct tsi108_prv_data { > u32 msg_enable; /* debug message level */ > struct mii_if_info mii_if; > unsigned int init_media; > + > + struct platform_device *pdev; > }; > > /* Structure for a device driver */ > @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) > data->txskbs[tx] = skb; > > if (i == 0) { > - data->txring[tx].buf0 = dma_map_single(NULL, skb->data, > - skb_headlen(skb), DMA_TO_DEVICE); > + data->txring[tx].buf0 = dma_map_single(&data->pdev->dev, > + skb->data, skb_headlen(skb), > + DMA_TO_DEVICE); > data->txring[tx].len = skb_headlen(skb); > misc |= TSI108_TX_SOF; > } else { > const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; > > - data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag, > - 0, > - skb_frag_size(frag), > - DMA_TO_DEVICE); > + data->txring[tx].buf0 = > + skb_frag_dma_map(&data->pdev->dev, frag, > + 0, skb_frag_size(frag), > + DMA_TO_DEVICE); > data->txring[tx].len = skb_frag_size(frag); > } > > @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget) > if (!skb) > break; > > - data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, > - TSI108_RX_SKB_SIZE, > - DMA_FROM_DEVICE); > + data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev, > + skb->data, TSI108_RX_SKB_SIZE, > + DMA_FROM_DEVICE); > > /* Sometimes the hardware sets blen to zero after packet > * reception, even though the manual says that it's only ever > @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev) > data->id, dev->irq, dev->name); > } > > - data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma, > - GFP_KERNEL); > + data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size, > + &data->rxdma, GFP_KERNEL); > if (!data->rxring) > return -ENOMEM; > > - data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma, > - GFP_KERNEL); > + data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size, > + &data->txdma, GFP_KERNEL); > if (!data->txring) { > - pci_free_consistent(NULL, rxring_size, data->rxring, > + dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring, > data->rxdma); > return -ENOMEM; > } > @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev) > dev_kfree_skb(skb); > } > > - dma_free_coherent(0, > + dma_free_coherent(&data->pdev->dev, > TSI108_RXRING_LEN * sizeof(rx_desc), > data->rxring, data->rxdma); > - dma_free_coherent(0, > + dma_free_coherent(&data->pdev->dev, > TSI108_TXRING_LEN * sizeof(tx_desc), > data->txring, data->txdma); > > @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev) > printk("tsi108_eth%d: probe...\n", pdev->id); > data = netdev_priv(dev); > data->dev = dev; > + data->pdev = pdev; > > pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", > pdev->id, einfo->regs, einfo->phyregs, > -- > 2.14.2 >
From: Bjorn Helgaas <helgaas@kernel.org> Date: Wed, 17 Jan 2018 18:08:18 -0600 > [+cc David, FYI, I plan to merge this via PCI along with the rest of > Christoph's series] No problem.
diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index 0624b71ab5d4..edcd1e60b30d 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -152,6 +152,8 @@ struct tsi108_prv_data { u32 msg_enable; /* debug message level */ struct mii_if_info mii_if; unsigned int init_media; + + struct platform_device *pdev; }; /* Structure for a device driver */ @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev) data->txskbs[tx] = skb; if (i == 0) { - data->txring[tx].buf0 = dma_map_single(NULL, skb->data, - skb_headlen(skb), DMA_TO_DEVICE); + data->txring[tx].buf0 = dma_map_single(&data->pdev->dev, + skb->data, skb_headlen(skb), + DMA_TO_DEVICE); data->txring[tx].len = skb_headlen(skb); misc |= TSI108_TX_SOF; } else { const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1]; - data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag, - 0, - skb_frag_size(frag), - DMA_TO_DEVICE); + data->txring[tx].buf0 = + skb_frag_dma_map(&data->pdev->dev, frag, + 0, skb_frag_size(frag), + DMA_TO_DEVICE); data->txring[tx].len = skb_frag_size(frag); } @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget) if (!skb) break; - data->rxring[rx].buf0 = dma_map_single(NULL, skb->data, - TSI108_RX_SKB_SIZE, - DMA_FROM_DEVICE); + data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev, + skb->data, TSI108_RX_SKB_SIZE, + DMA_FROM_DEVICE); /* Sometimes the hardware sets blen to zero after packet * reception, even though the manual says that it's only ever @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev) data->id, dev->irq, dev->name); } - data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma, - GFP_KERNEL); + data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size, + &data->rxdma, GFP_KERNEL); if (!data->rxring) return -ENOMEM; - data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma, - GFP_KERNEL); + data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size, + &data->txdma, GFP_KERNEL); if (!data->txring) { - pci_free_consistent(NULL, rxring_size, data->rxring, + dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring, data->rxdma); return -ENOMEM; } @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev) dev_kfree_skb(skb); } - dma_free_coherent(0, + dma_free_coherent(&data->pdev->dev, TSI108_RXRING_LEN * sizeof(rx_desc), data->rxring, data->rxdma); - dma_free_coherent(0, + dma_free_coherent(&data->pdev->dev, TSI108_TXRING_LEN * sizeof(tx_desc), data->txring, data->txdma); @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev) printk("tsi108_eth%d: probe...\n", pdev->id); data = netdev_priv(dev); data->dev = dev; + data->pdev = pdev; pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n", pdev->id, einfo->regs, einfo->phyregs,
We need to pass a struct device to the dma API, even if some architectures still support that for legacy reasons, and should not mix it with the old PCI dma API. Note that the driver also seems to never actually unmap its dma mappings, but to fix that we'll need someone more familar with the driver. Signed-off-by: Christoph Hellwig <hch@lst.de> --- drivers/net/ethernet/tundra/tsi108_eth.c | 36 ++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 16 deletions(-)