diff mbox series

[U-Boot,v5,3/5] config: cadence_spi: Remove defines read from DT

Message ID 20180106181802.9298-4-jarush@gmail.com
State Changes Requested
Delegated to: Jagannadha Sutradharudu Teki
Headers show
Series spi: cadence_spi: Adopt Linux DT bindings | expand

Commit Message

Jason Rush Jan. 6, 2018, 6:18 p.m. UTC 
Cleanup unused #define values that are read from the DT.

Tested on TI K2G platform:
Tested-by: Vignesh R <vigneshr@ti.com>

Tested on a socfpga-cyclonev board:
Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>

Signed-off-by: Jason Rush <jarush@gmail.com>
Cc: Marek Vasut <marex@denx.de>
---
Changes for v5:
   - Rebased
Changes for v4:
   - Rebased
Changes for v3:
   - None

 include/configs/k2g_evm.h        | 1 -
 include/configs/socfpga_common.h | 1 -
 include/configs/stv0991.h        | 1 -
 3 files changed, 3 deletions(-)

Comments

Jagan Teki Jan. 23, 2018, 9:15 a.m. UTC | #1 
On Sat, Jan 6, 2018 at 11:48 PM, Jason Rush <jarush@gmail.com> wrote:
> Cleanup unused #define values that are read from the DT.
>
> Tested on TI K2G platform:
> Tested-by: Vignesh R <vigneshr@ti.com>
>
> Tested on a socfpga-cyclonev board:
> Tested-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
>
> Signed-off-by: Jason Rush <jarush@gmail.com>
> Cc: Marek Vasut <marex@denx.de>
> ---

Reviewed-by: Jagan Teki <jagan@openedev.com>
diff mbox series

Patch

diff --git a/include/configs/k2g_evm.h b/include/configs/k2g_evm.h
index df81c09d86..535e7124fc 100644
--- a/include/configs/k2g_evm.h
+++ b/include/configs/k2g_evm.h
@@ -93,7 +93,6 @@ 
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_CADENCE_QSPI
 #define CONFIG_CQSPI_REF_CLK 384000000
-#define CONFIG_CQSPI_DECODER 0x0
 #define CONFIG_BOUNCE_BUFFER
 #endif
 
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 66e7c4fc8b..ec8bb50050 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -184,7 +184,6 @@  unsigned int cm_get_l4_sp_clk_hz(void);
 unsigned int cm_get_qspi_controller_clk_hz(void);
 #define CONFIG_CQSPI_REF_CLK		cm_get_qspi_controller_clk_hz()
 #endif
-#define CONFIG_CQSPI_DECODER		0
 #define CONFIG_BOUNCE_BUFFER
 
 /*
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index c99fb676cb..fd96979bf8 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -63,7 +63,6 @@ 
 + * QSPI support
 + */
 #ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
-#define CONFIG_CQSPI_DECODER		0
 #define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
 #define CONFIG_BOUNCE_BUFFER