[v3] ARM: dts: ls1021a: add support for Moxa UC-8410A open platform

Message ID 20171226045432.14749-1-sz.lin@moxa.com
State New
Headers show
Series
  • [v3] ARM: dts: ls1021a: add support for Moxa UC-8410A open platform
Related show

Commit Message

SZ Lin (林上智) Dec. 26, 2017, 4:54 a.m.
Add support for Moxa UC-8410A open platform

The UC-8410A computing platform is designed
for embedded communication-centric industrial applications

The features of UC-8410A are:
* QSPI flash
* SD slot
* 3x LAN
* 8x RS-232/422/485 ports, software-selectable
* Mini PCIe form factor with PCIe/USB signal
* 2x USB host
* TPM
* Watchdog
* RTC
* User LEDs
* Beeper
* Push button

Signed-off-by: Jimmy Chen <jimmy.chen@moxa.com>
Signed-off-by: Harry YJ Jhou <harryyj.jhou@moxa.com>
Signed-off-by: SZ Lin <sz.lin@moxa.com>

---
Changes from v2:
- Replace underscore with hyphen in node name
- Add unit address after nodes with 'reg' property
- Sort nodes with unit-address in order of the address
- Fix up unit-address in partitions node

 arch/arm/boot/dts/Makefile                  |   1 +
 arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts | 241 ++++++++++++++++++++++++++++
 2 files changed, 242 insertions(+)
 create mode 100644 arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts

Comments

Shawn Guo Dec. 26, 2017, 9:17 a.m. | #1
On Tue, Dec 26, 2017 at 12:54:31PM +0800, SZ Lin wrote:
> Add support for Moxa UC-8410A open platform
> 
> The UC-8410A computing platform is designed
> for embedded communication-centric industrial applications
> 
> The features of UC-8410A are:
> * QSPI flash
> * SD slot
> * 3x LAN
> * 8x RS-232/422/485 ports, software-selectable
> * Mini PCIe form factor with PCIe/USB signal
> * 2x USB host
> * TPM
> * Watchdog
> * RTC
> * User LEDs
> * Beeper
> * Push button
> 
> Signed-off-by: Jimmy Chen <jimmy.chen@moxa.com>
> Signed-off-by: Harry YJ Jhou <harryyj.jhou@moxa.com>
> Signed-off-by: SZ Lin <sz.lin@moxa.com>

Applied, thanks.

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..62ce9b27ad30 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -520,6 +520,7 @@  dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-warp.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
diff --git a/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
new file mode 100644
index 000000000000..d01f64b252b1
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dts
@@ -0,0 +1,241 @@ 
+/*
+ * Copyright (C) 2017 Moxa Inc. - https://www.moxa.com/
+ *
+ * Author: Harry YJ Jhou (周亞諄) <harryyj.jhou@moxa.com>
+ *         Jimmy Chen (陳永達)    <jimmy.chen@moxa.com>
+ *         SZ Lin (林上智)        <sz.lin@moxa.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "ls1021a.dtsi"
+
+/ {
+	model = "Moxa UC-8410A";
+
+	aliases {
+		enet0_rgmii_phy = &rgmii_phy0;
+		enet1_rgmii_phy = &rgmii_phy1;
+		enet2_rgmii_phy = &rgmii_phy2;
+	};
+
+	sys_mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		  compatible = "regulator-fixed";
+		  regulator-name = "3P3V";
+		  regulator-min-microvolt = <3300000>;
+		  regulator-max-microvolt = <3300000>;
+		  regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		cel-pwr {
+			label = "UC8410A:CEL-PWR";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		cel-reset {
+			label = "UC8410A:CEL-RESET";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		str-led {
+			label = "UC8410A:RED:PROG";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		sw-ready {
+			label = "UC8410A:GREEN:SWRDY";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		beeper {
+			label = "UC8410A:BEEP";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led0 {
+			label = "UC8410A:GREEN:PROG2";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led1 {
+			label = "UC8410A:GREEN:PROG1";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		prog-led2 {
+			label = "UC8410A:GREEN:PROG0";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal0 {
+			label = "UC8410A:GREEN:CEL2";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal1 {
+			label = "UC8410A:GREEN:CEL1";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		wifi-signal2 {
+			label = "UC8410A:GREEN:CEL0";
+			gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-red {
+			label = "UC8410A:RED:DIA";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-green {
+			label = "UC8410A:GREEN:DIA";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		cpu-diag-yellow {
+			label = "UC8410A:YELLOW:DIA";
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pushbtn-key {
+			label = "push button key";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			default-state = "on";
+		};
+	};
+};
+
+&enet0 {
+	phy-handle = <&rgmii_phy0>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet1 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&enet2 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tpm@20 {
+		compatible = "infineon,slb9635tt";
+		reg = <0x20>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&lpuart0 {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "marvell,88e1118";
+		reg = <0x0>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "marvell,88e1118";
+		reg = <0x1>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		compatible = "marvell,88e1118";
+		reg = <0x2>;
+		marvell,reg-init =
+			<3 0x11 0 0x4415>, /* Reg 3,17 */
+			<3 0x10 0 0x77>; /* Reg 3,16 */
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	fsl,spi-num-chipselects = <2>;
+	fsl,spi-flash-chipselects = <0>;
+	fsl,qspi-has-second-chip;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "spansion,s25fl064l", "spansion,s25fl164k";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partitions@0 {
+			label = "U-Boot";
+			reg = <0x0 0x180000>;
+		};
+
+		partitions@180000 {
+			label = "U-Boot Env";
+			reg = <0x180000 0x680000>;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};