@@ -169,6 +169,7 @@ orangepi_one_defconfig: *defconfig
orangepi_pc_defconfig: *defconfig
orangepi_pc_plus_defconfig: *defconfig
orangepi_plus_defconfig: *defconfig
+orangepi_win_defconfig: *defconfig
orangepi_zero_defconfig: *defconfig
pandaboard_defconfig: *defconfig
pc_x86_64_bios_defconfig: *defconfig
@@ -775,12 +775,14 @@ F: board/engicam/
F: board/friendlyarm/nanopi-a64/
F: board/friendlyarm/nanopi-neo2/
F: board/olimex/a64-olinuxino/
+F: board/orangepi/orangepi-win/
F: board/pine64/
F: configs/bananapi_m1_defconfig
F: configs/bananapi_m64_defconfig
F: configs/friendlyarm_nanopi_a64_defconfig
F: configs/friendlyarm_nanopi_neo2_defconfig
F: configs/olimex_a64_olinuxino_defconfig
+F: configs/orangepi_win_defconfig
F: configs/pine64_defconfig
F: configs/pine64_sopine_defconfig
F: configs/engicam_imx6qdl_icore_defconfig
new file mode 100644
@@ -0,0 +1,6 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
+
+fatload mmc 0 $kernel_addr_r Image
+fatload mmc 0 $fdt_addr_r sun50i-a64-orangepi-win.dtb
+
+booti $kernel_addr_r - $fdt_addr_r
new file mode 100644
@@ -0,0 +1,39 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "Image",
+ "sun50i-a64-orangepi-win.dtb",
+ "boot.scr"
+ }
+ }
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition spl {
+ in-partition-table = "no"
+ image = "sunxi-spl.bin"
+ offset = 8192
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot.itb"
+ offset = 40K
+ size = 1M # 1MB - 40K
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
new file mode 100644
@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Orangepi Win/Win Plus. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Orangepi Win/Win Plus link:
+http://www.orangepi.org/OrangePiWin_WinPlus/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Win
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make orangepi_win_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Orangepi Win/Win Plus and power it up. The console
+is on the serial line, 115200 8N1.
new file mode 100644
@@ -0,0 +1,47 @@
+BR2_aarch64=y
+BR2_cortex_a53=y
+BR2_ARM_FPU_VFPV4=y
+
+# Linux headers same as kernel, a 4.14 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y
+
+# Firmware
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/apritzel/arm-trusted-firmware.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="sun50iw1p1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="aa75c8da415158a94b82a430b2b40000778e851f"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y
+
+# Bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="orangepi_win"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/sunxi-spl.bin"
+BR2_TARGET_UBOOT_BOOT_SCRIPT=y
+BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE="board/orangepi/orangepi-win/boot.cmd"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14"
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-a64-orangepi-win"
+
+# Filesystem
+BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Win/Win Plus"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/orangepi/orangepi-win/genimage.cfg"
Add initial support for Orangepi Win/Win Plus board with below features: - U-Boot 2017.11 - Linux 4.14 - Default packages from buildroot Cc: zhaoyifan <zhao_steven@263.net> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/orangepi/orangepi-win/boot.cmd | 6 ++++ board/orangepi/orangepi-win/genimage.cfg | 39 ++++++++++++++++++++++++++ board/orangepi/orangepi-win/readme.txt | 37 +++++++++++++++++++++++++ configs/orangepi_win_defconfig | 47 ++++++++++++++++++++++++++++++++ 6 files changed, 132 insertions(+) create mode 100644 board/orangepi/orangepi-win/boot.cmd create mode 100644 board/orangepi/orangepi-win/genimage.cfg create mode 100644 board/orangepi/orangepi-win/readme.txt create mode 100644 configs/orangepi_win_defconfig