diff mbox series

[v6,13/18] bindings: PCI: artpec: Add support for endpoint mode

Message ID 20171219232940.659-14-niklas.cassel@axis.com
State Accepted
Headers show
Series dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support | expand

Commit Message

Niklas Cassel Dec. 19, 2017, 11:29 p.m. UTC 
The PCIe controller integrated in ARTPEC-6 SoCs is capable of operating in
endpoint mode. Add endpoint mode support to the artpec6 driver.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
index 4e4aee4439ea..33eef7ae5a23 100644
--- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
@@ -4,7 +4,8 @@  This PCIe host controller is based on the Synopsys DesignWare PCIe IP
 and thus inherits all the common properties defined in designware-pcie.txt.
 
 Required properties:
-- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
+- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode;
+	      "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode;
 - reg: base addresses and lengths of the PCIe controller (DBI),
 	the PHY controller, and configuration address space.
 - reg-names: Must include the following entries: