@@ -11,13 +11,15 @@ board_config_update
board=$(board_name)
case "$board" in
-rpi-2-b |\
-rpi-3-b |\
-rpi-b |\
-rpi-b-plus)
+raspberrypi,model-b |\
+raspberrypi,model-b-plus |\
+raspberrypi,model-b-rev2 |\
+raspberrypi,2-model-b |\
+raspberrypi,3-model-b)
ucidef_set_interface_lan "eth0"
;;
-rpi-zero-w)
+
+raspberrypi,model-zero-w)
ucidef_set_interface_lan "wlan0"
;;
esac
@@ -7,14 +7,13 @@
set_state() {
case "$(board_name)" in
- rpi-2-b |\
- rpi-b-plus)
+ raspberrypi,2-model-b |\
+ raspberrypi,model-b-plus)
status_led="led1"
;;
- rpi-b |\
- rpi-cm |\
- rpi-zero |\
- rpi-zero-w)
+ raspberrypi,model-b |\
+ raspberrypi,model-zero |\
+ raspberrypi,model-zero-w)
status_led="led0"
;;
esac
deleted file mode 100644
@@ -1,43 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015-2016 OpenWrt.org
-# Copyright (C) 2017 LEDE project
-
-ifname=""
-
-brcm2708_detect() {
- local board_name model
-
- model=$(cat /proc/device-tree/model)
- case "$model" in
- "Raspberry Pi 2 Model B Rev"*)
- board_name="rpi-2-b"
- ;;
- "Raspberry Pi 3 Model B Rev"*)
- board_name="rpi-3-b"
- ;;
- "Raspberry Pi Compute Module Rev"*)
- board_name="rpi-cm"
- ;;
- "Raspberry Pi Model B Plus Rev"* |\
- "Raspberry Pi Model B+ Rev"*)
- board_name="rpi-b-plus"
- ;;
- "Raspberry Pi Model B Rev"*)
- board_name="rpi-b"
- ;;
- "Raspberry Pi Zero Rev"*)
- board_name="rpi-zero"
- ;;
- "Raspberry Pi Zero W Rev"*)
- board_name="rpi-zero-w"
- ;;
- *)
- board_name="unknown"
- ;;
- esac
-
- [ -e "/tmp/sysinfo" ] || mkdir -p "/tmp/sysinfo"
-
- echo "$board_name" > /tmp/sysinfo/board_name
- echo "$model" > /tmp/sysinfo/model
-}
deleted file mode 100644
@@ -1,10 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015 OpenWrt.org
-
-do_brcm2708() {
- . /lib/brcm2708.sh
-
- brcm2708_detect
-}
-
-boot_hook_add preinit_main do_brcm2708
@@ -6,10 +6,11 @@ set_preinit_iface() {
. /lib/functions.sh
case "$(board_name)" in
- rpi-2-b |\
- rpi-3-b |\
- rpi-b |\
- rpi-b-plus)
+ raspberrypi,2-model-b |\
+ raspberrypi,3-model-b |\
+ raspberrypi,model-b |\
+ raspberrypi,model-b-plus |\
+ raspberrypi,model-b-rev2)
ifname=eth0
;;
esac
@@ -57,7 +57,7 @@ endef
define Device/rpi
DEVICE_TITLE := Raspberry Pi B/B+/CM/Zero/ZeroW
DEVICE_DTS := bcm2708-rpi-b bcm2708-rpi-b-plus bcm2708-rpi-cm bcm2708-rpi-0-w
- SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero-w
+ SUPPORTED_DEVICES := rpi-b rpi-b-plus rpi-cm rpi-zero rpi-zero-w raspberrypi,model-b raspberrypi,model-b-plus raspberrypi,compute-module-1 raspberrypi,model-b-rev2 raspberrypi,model-zero raspberrypi,model-zero-w
endef
ifeq ($(SUBTARGET),bcm2708)
TARGET_DEVICES += rpi
@@ -66,7 +66,7 @@ endif
define Device/rpi-2
DEVICE_TITLE := Raspberry Pi 2B/3B/3CM
DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-cm3
- SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm
+ SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,compute-module-3
endef
ifeq ($(SUBTARGET),bcm2709)
TARGET_DEVICES += rpi-2
@@ -76,7 +76,7 @@ define Device/rpi-3
KERNEL_IMG := kernel8.img
DEVICE_TITLE := Raspberry Pi 3B (64 bit)
DEVICE_DTS := broadcom/bcm2710-rpi-3-b
- SUPPORTED_DEVICES := rpi-3-b
+ SUPPORTED_DEVICES := rpi-3-b raspberrypi,3-model-b
endef
ifeq ($(SUBTARGET),bcm2710)
TARGET_DEVICES += rpi-3
Use the values populated by the generic board detect function. The first compatible from the device tree source file will be the board name in userspace. The model property from the device tree source file will be the model name. Change the board name where used in the userspace and drop the target specific board detect, to use the generic one. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> --- .../brcm2708/base-files/etc/board.d/02_network | 12 +++--- target/linux/brcm2708/base-files/etc/diag.sh | 11 +++--- target/linux/brcm2708/base-files/lib/brcm2708.sh | 43 ---------------------- .../lib/preinit/01_preinit_do_brcm2708.sh | 10 ----- .../lib/preinit/05_set_preinit_iface_brcm2708 | 9 +++-- target/linux/brcm2708/image/Makefile | 6 +-- 6 files changed, 20 insertions(+), 71 deletions(-) delete mode 100644 target/linux/brcm2708/base-files/lib/brcm2708.sh delete mode 100644 target/linux/brcm2708/base-files/lib/preinit/01_preinit_do_brcm2708.sh