[v4,3/4] ARM: dts: add pwm node for r40.

Message ID 20171213144628.GA18246@arx-s1
State Superseded
Headers show
Series
  • pwm support for allwinner sun8i R40/V40/T3 SOCs.
Related show

Commit Message

Hao Zhang Dec. 13, 2017, 2:46 p.m.
This patch add pwm node for r40.

Signed-off-by: hao_zhang <hao5781286@gmail.com>
---
 arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts |  6 ++++++
 arch/arm/boot/dts/sun8i-r40.dtsi                  | 13 +++++++++++++
 2 files changed, 19 insertions(+)

Comments

Maxime Ripard Dec. 13, 2017, 3:57 p.m. | #1
Hi,

On Wed, Dec 13, 2017 at 10:46:28PM +0800, hao_zhang wrote:
> This patch add pwm node for r40.
> 
> Signed-off-by: hao_zhang <hao5781286@gmail.com>
> ---
>  arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts |  6 ++++++
>  arch/arm/boot/dts/sun8i-r40.dtsi                  | 13 +++++++++++++
>  2 files changed, 19 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> index 8c5efe2..6cf6273 100644
> --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
> @@ -196,6 +196,12 @@
>  	status = "okay";
>  };
>  
> +&pwm {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm_pins>;
> +	status = "okay";
> +};
> +

Can you split this part into a separate patch?

Thanks!
Maxime

Patch

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index 8c5efe2..6cf6273 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -196,6 +196,12 @@ 
 	status = "okay";
 };
 
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 173dcc1..6628b17 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -295,6 +295,11 @@ 
 				bias-pull-up;
 			};
 
+			pwm_pins: pwm0-pin {
+				pins = "PB2", "PB3";
+				function = "pwm";
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
@@ -306,6 +311,14 @@ 
 			reg = <0x01c20c90 0x10>;
 		};
 
+		pwm: pwm@1c23400 {
+			     compatible = "allwinner,sun8i-r40-pwm";
+			     reg = <0x01c23400 0x154>;
+			     clocks = <&osc24M>;
+			     #pwm-cells = <3>;
+			     status = "disabled";
+		};
+
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;