| Message ID | 1513061911-30076-12-git-send-email-jagan@amarulasolutions.com |
|---|---|
| State | Deferred |
| Delegated to: | Jagannadha Sutradharudu Teki |
| Headers | show |
| Series | sun50i: a64: add support for axp803, musb | expand |
On Tue, Dec 12, 2017 at 12:28:26PM +0530, Jagan Teki wrote: > USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or > vbus pin through AXP_GPIO driver. > > This patch add support for it. > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > --- > configs/bananapi_m64_defconfig | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig > index 461567f..55feafe 100644 > --- a/configs/bananapi_m64_defconfig > +++ b/configs/bananapi_m64_defconfig > @@ -4,6 +4,8 @@ CONFIG_MACH_SUN50I=y > CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > CONFIG_MMC0_CD_PIN="PH13" > CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > +CONFIG_USB0_ID_DET="PH9" > +CONFIG_AXP_GPIO=y > CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_SPL=y > @@ -14,4 +16,5 @@ CONFIG_SPL=y > # CONFIG_SPL_EFI_PARTITION is not set > CONFIG_SUN8I_EMAC=y > CONFIG_USB_EHCI_HCD=y > +CONFIG_USB_MUSB_GADGET=y Did you test the host mode as well? Maxime
On Tue, Dec 12, 2017 at 1:34 PM, Maxime Ripard <maxime.ripard@free-electrons.com> wrote: > On Tue, Dec 12, 2017 at 12:28:26PM +0530, Jagan Teki wrote: >> USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or >> vbus pin through AXP_GPIO driver. >> >> This patch add support for it. >> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> >> --- >> configs/bananapi_m64_defconfig | 3 +++ >> 1 file changed, 3 insertions(+) >> >> diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig >> index 461567f..55feafe 100644 >> --- a/configs/bananapi_m64_defconfig >> +++ b/configs/bananapi_m64_defconfig >> @@ -4,6 +4,8 @@ CONFIG_MACH_SUN50I=y >> CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y >> CONFIG_MMC0_CD_PIN="PH13" >> CONFIG_MMC_SUNXI_SLOT_EXTRA=2 >> +CONFIG_USB0_ID_DET="PH9" >> +CONFIG_AXP_GPIO=y >> CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" >> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set >> CONFIG_SPL=y >> @@ -14,4 +16,5 @@ CONFIG_SPL=y >> # CONFIG_SPL_EFI_PARTITION is not set >> CONFIG_SUN8I_EMAC=y >> CONFIG_USB_EHCI_HCD=y >> +CONFIG_USB_MUSB_GADGET=y > > Did you test the host mode as well? No, I've not tried host mode yet. thanks!
On Tue, Dec 12, 2017 at 02:43:38PM +0530, Jagan Teki wrote: > On Tue, Dec 12, 2017 at 1:34 PM, Maxime Ripard > <maxime.ripard@free-electrons.com> wrote: > > On Tue, Dec 12, 2017 at 12:28:26PM +0530, Jagan Teki wrote: > >> USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or > >> vbus pin through AXP_GPIO driver. > >> > >> This patch add support for it. > >> > >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > >> --- > >> configs/bananapi_m64_defconfig | 3 +++ > >> 1 file changed, 3 insertions(+) > >> > >> diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig > >> index 461567f..55feafe 100644 > >> --- a/configs/bananapi_m64_defconfig > >> +++ b/configs/bananapi_m64_defconfig > >> @@ -4,6 +4,8 @@ CONFIG_MACH_SUN50I=y > >> CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y > >> CONFIG_MMC0_CD_PIN="PH13" > >> CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > >> +CONFIG_USB0_ID_DET="PH9" > >> +CONFIG_AXP_GPIO=y > >> CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" > >> # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > >> CONFIG_SPL=y > >> @@ -14,4 +16,5 @@ CONFIG_SPL=y > >> # CONFIG_SPL_EFI_PARTITION is not set > >> CONFIG_SUN8I_EMAC=y > >> CONFIG_USB_EHCI_HCD=y > >> +CONFIG_USB_MUSB_GADGET=y > > > > Did you test the host mode as well? > > No, I've not tried host mode yet. Then you didn't test that at least the ID pin and the VBUS control was working :) Maxime
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig index 461567f..55feafe 100644 --- a/configs/bananapi_m64_defconfig +++ b/configs/bananapi_m64_defconfig @@ -4,6 +4,8 @@ CONFIG_MACH_SUN50I=y CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_USB0_ID_DET="PH9" +CONFIG_AXP_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL=y @@ -14,4 +16,5 @@ CONFIG_SPL=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
USB-OTG require MUSB driver along with PHY#0 id(PH9) and/or vbus pin through AXP_GPIO driver. This patch add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- configs/bananapi_m64_defconfig | 3 +++ 1 file changed, 3 insertions(+)