diff mbox series

SB600 for the Nemo board has non-zero devices on non-root bus

Message ID f5fe03d3-87f8-2a2d-2d83-fbefcd489a77@xenosoft.de
State Not Applicable
Headers show
Series SB600 for the Nemo board has non-zero devices on non-root bus | expand

Commit Message

Christian Zigotzky Dec. 9, 2017, 6:03 p.m. UTC 
On 08 December 2017 at 12:59PM, Michael Ellerman wrote:
 >
 >> Darren's idea of doing it at the same time you tweak the SB600 "relax
 >> pci-e" bit is ideal because then the two pieces are obviously
 >> connected and it wouldn't affect any other systems at all.
 >
 > Yes that would be ideal. That patch is currently out-of-tree I gather,
 > but I guess everyone who's using these machines must have that patch
 > anyway.
 >
 > Darren what does that code look like? Can we get it upstream and close
 > the loop on this?
 >
 > cheers
 >

Hi Michael,

Please find attached the code.

Thanks,
Christian
diff mbox series

Patch

diff -rupN a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c
--- a/arch/powerpc/platforms/pasemi/pci.c	2017-11-16 08:18:35.078874462 +0100
+++ b/arch/powerpc/platforms/pasemi/pci.c	2017-11-16 08:17:22.034367975 +0100
@@ -27,6 +27,7 @@ 
 #include <linux/pci.h>
 
 #include <asm/pci-bridge.h>
+#include <asm/isa-bridge.h>
 #include <asm/machdep.h>
 
 #include <asm/ppc-pci.h>
@@ -108,6 +109,69 @@  static int workaround_5945(struct pci_bu
 	return 1;
 }
 
+#ifdef CONFIG_PPC_PASEMI_NEMO
+static int sb600_bus = 5;
+static void __iomem *iob_mapbase = NULL;
+
+static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
+                             int offset, int len, u32 *val);
+
+static void sb600_set_flag(int bus)
+{
+    struct resource res;
+    struct device_node *dn;
+       struct pci_bus *busp;
+       u32 val;
+       int err;
+
+       if (sb600_bus == -1)
+       {
+               busp = pci_find_bus(0, 0);
+               pa_pxp_read_config(busp, PCI_DEVFN(17,0), PCI_SECONDARY_BUS, 1, &val);
+
+               sb600_bus = val;
+
+               printk(KERN_CRIT "NEMO SB600 on bus %d.\n",sb600_bus);
+       }
+
+       if (iob_mapbase == NULL)
+       {
+        dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob");
+        if (!dn)
+        {
+               printk(KERN_CRIT "NEMO SB600 missing iob node\n");
+                       return;
+               }
+
+               err = of_address_to_resource(dn, 0, &res);
+        of_node_put(dn);
+
+               if (err)
+               {
+               printk(KERN_CRIT "NEMO SB600 missing resource\n");
+                       return;
+               }
+
+               printk(KERN_CRIT "NEMO SB600 IOB base %08lx\n",res.start);
+
+               iob_mapbase = ioremap(res.start + 0x100, 0x94);
+       }
+
+       if (iob_mapbase != NULL)
+       {
+               if (bus == sb600_bus)
+               {
+                       out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 4) | 0x800);
+               }
+               else
+               {
+                       out_le32(iob_mapbase + 4, in_le32(iob_mapbase + 4) & ~0x800);
+               }
+       }
+}
+#endif
+
+
 static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn,
 			      int offset, int len, u32 *val)
 {
@@ -126,6 +190,10 @@  static int pa_pxp_read_config(struct pci
 
 	addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset);
 
+#ifdef CONFIG_PPC_PASEMI_NEMO
+       sb600_set_flag(bus->number);
+#endif
+
 	/*
 	 * Note: the caller has already checked that offset is
 	 * suitably aligned and that len is 1, 2 or 4.
@@ -210,6 +278,9 @@  static int __init pas_add_bridge(struct
 	/* Interpret the "ranges" property */
 	pci_process_bridge_OF_ranges(hose, dev, 1);
 
+	/* Scan for an isa bridge. */
+	isa_bridge_find_early(hose);
+
 	return 0;
 }